RFC Look Up with MultiMapping in PI 7.1

Hi All,
I have created a multimapping with one source & two target messages. I am using a RFC look Up for one of fields inside mapping.
But, when I used this multimapping in interface determination in PI 7.1, at runtime i got an error.
Error - is variable (Say XYZ) used while creating parameter for RFC look Up in message mapping doesn't exist.
If I execute multimapping without RFC look Up, it worked absolutely fine.
I have used RFC look Up in number of normal message mappings, it worked fine.
Not sure, if this is a issue with PI 7.1, that multi-mapping with RFC look Up isn't supported at enhanced interface determination.
Please provide inputs for this or if anybody has hands on experience using this with PI 7.1
Thanks,
Venkat

Hi,
Please go through the thread:
Re: Global Variables declaration in PI 7.1
and check whether its useful.
Regards,
Vineetha.

Similar Messages

Error in BPM with multimapping.

Hi,
I've got next error in a transfromation step of bpm with multimapping :
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://www.miquello.com/C3900 IM_I3934_REPLICA_BBY , Software Component Version 931D4B005DF711DFC0CACC330A640786</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type JAVA , Program com/sap/xi/tf/_MM_I3934_REPLICA_BBY_</Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload</Trace>
<Trace level="3" type="T">Mapping has exactly one source message</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Executing multi-mapping</Trace>
<Trace level="1" type="T">while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' Thrown: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' at com.sap.guid.GUID.parseHexGUID(GUID.java:1046) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:127) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:140) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.GeneratedMethodAccessor804.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1098.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)</Trace>
</MappingTrace>
However i've tested with same input message in Operation Mapping ESR, without any error.
What could be the cause?
Thanks, in advance.
Carme.

Hi,
Are you using parameterized mapping or RFC lookup in your mapping???? If yes, please make sure that you are passing the parameter in the interface determination instead of null value.
Also verify whether your cache is updated with the latest GUID of your mapping program or not.
Regards,
Priyanka.

IDOC to IDOC....... RFC look up

Hi Friends,
Iam new to SAP XI and have some questions.Answers to this query will be my pleasure.
my scenario:
sender :idoc1 (delivery)
receiver: idoc2 if customer present
 else idoc3 to create "customer" and then idoc2 to create "sales order"
Message mappings:
1 for idoc1 to idoc2
1 for idoc1 to idoc3
and 2 interface mappings for the above message mappings.
Please explain me how can i use one mapping if condition is false and then mapping2
and how to use second mapping if condition is true.
Also given below is mapping for a field .Please check and explain:
source field:E1ADRM1-PARTNER_ID
Mapping/Transformation rule:E1ADRM1-PARTNER_Q = 'WE' Select KUNNR from KNB1where ALTKN = E1ADRM1-PARTNER_ID and BUKRS = 'GR11' Value = KNB1-KUNNR and check that KNA1-STCD2 = 999839383 with KNA1-KUNNR=KNB1-KUNNR if no entry found in KNB1customer must be created
Target field: PARTN_NUMB
Please explain.I got an answer previously that i have to use RFC look up, if so please explain where and how to write the RFC look up.
Thanks in advance,
Harish.

Hi Kinthali,
I think I am not getting your question correctly...
You need to map from Idoc1 to idoc2 or if idoc 2 is not the idoc1 to idoc3... right??
>>Please explain me how can i use one mapping if condition is false and then mapping2 and how to use second mapping if condition is true.
Which condition are you talking about here?? Check the condition in the interface determination and then choose the needed interface...
Regards
Suraj

Cannot perform RFC Look UP

Hi All,
When I executed the RFC Look up function in the mapping could see the following error.
"Run time exception when processing target field mapping. Cannot perform RFC Look Up".
I performed the below steps but still could find the same error again:
1.In the test tab of the message mapping I have assined a channel which I configured in the Interface determination of the configuration and also assigned a value to that channel.
2. Has given the values for the parameters in the operation mapping and also the binding is done successfully.
3. The function module I assined is also existing and could test the same for output values for the given input values.
Please help me resolve the error.
Thanks & Regards,
Kumar.

Hi,
This is the error I could see in the communication channel monitoring of RWB.
"Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>"
Help me with this error.
Thanks,
Kumar.

Reg. RFC look up

Hi All,
I am working on RFC look up. My Scenario is IDoc to IDoc. The IDoc has a segment say E1 where the occurence is 0---5 and two fields inside that i.e. QUALF and IDTNR. The requiremnt is like when QUALF is equal to 002 then fetch the value of material number from SAP and map to IDTNR. Also this material number is picked only when QUALF is equal to 003 and the field IDTNR has some value i.e. article number in SAP. So I need to get value of the material number equal to this article number.
I am using RFC look up for this mapping condition in order to fetch value from SAP.
Can anyone help me on this to configure the RFC look up in PI?
Thanks and Regards,
Neethu

Hi All,
For my requirement I have used this UDF,
String content = "";
MappingTrace importanttrace;
importanttrace = container.getTrace();
// filling the string with our RFC-XML (with values)
String m ="<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:ZSD_EAN_MATERIAL_GET xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><P_EAN11></P_EAN11></ns0:ZSD_EAN_MATERIAL_GET>" ;
RfcAccessor accessor = null;
ByteArrayOutputStream out = null;
try
// 1. Determine a channel (Business system, Communication channel)
Channel channel = LookupService.getChannel("RD9","CC_RFC_RECEIVER_LOOKUP_I040");
// 2. Get a RFC accessor for a channel.
accessor = LookupService.getRfcAccessor(channel);
// 3. Create a xml input stream representing the function module request message.
InputStream inputStream = new ByteArrayInputStream(m.getBytes());
// 4. Create xml payload
XmlPayload payload = LookupService.getXmlPayload(inputStream);
// 5. Execute lookup.
Payload result = accessor.call(payload);
InputStream in = result.getContent();
out = new ByteArrayOutputStream(1024);
byte[] buffer = new byte[1024];
for (int read = in.read(buffer); read > 0; read = in.read(buffer)) {
out.write(buffer, 0, read);
content = out.toString();
catch(LookupException e)
importanttrace.addWarning("Error while lookup " + e.getMessage() );
catch(IOException e)
importanttrace.addWarning("Error " + e.getMessage() );
finally
if (out!=null) {
try {
out.close();
} catch (IOException e) {
importanttrace.addWarning("Error while closing stream " + e.getMessage() );
// 7. close the accessor in order to free resources.
if (accessor!=null) {
try {
accessor.close();
} catch (LookupException e) {
importanttrace.addWarning("Error while closing accessor " + e.getMessage() );
//returning the result u2013 RFC-XML.response
return content;
While executing this UDF I am getting the output as:
<?xml version="1.0" encoding="UTF-8"?><rfc:ZSD_EAN_MATERIAL_GET.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Materialnumber></Materialnumber></rfc:ZSD_EAN_MATERIAL_GET.Response></IDTNR>
<KTEXT />
instead of value
Can anyone suggest me on this?
Thanks and Regards,
Neethu

Using RFC Look Up in Java Mapping

Hi All,
I need to do an RFC Look Up in a Java Mapping program. The response structure of the Function Module to be called consists of only one node called RESULT. In order to read the value exported by the function module in this export parameter RESULT, I am using the following code:
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = null;
factory.setNamespaceAware(false);
factory.setValidating(false);
Document docResponse = null;
InputStream in1 = result.getContent();
docResponse = builder.parse(in1);
String output = docResponse.getDocumentElement().getFirstChild().getNodeValue();
The function module works correctly and returns the expected result when tested in SE37. However, on running the above code, the statement docResponse.getDocumentElement().getFirstChild().getNodeValue(); always returns the value NULL and not the expected value that is actually returned by the RFC.
Kindly let me know where could I be going wrong.
Thanks in advance.

Hi Sreehari,
Your DOM code looks correct, it might be something with the overall code of java mapping. Just have a look at this blog /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
and compare you code with it. See whether you can fine tune your coding to get the rigth response.
Regards
Suraj

RFC Look Up APIs for a IDOC Receiver Communication Channel

Hi,
Can we use RFC Look Up APIs in UDF for a IDOC Receiver Communication Channel. (File to IDOC Scenario). Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Best Regards,
Madan Agrawal

As the name suggests, RFC lookup uses RFC receiver channel only. In mapping of your File to Idoc scenario, you may perform this lookup.
Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Configure ALEAudit for this requirement. How were you planning to use RFC lookup for such a requirement?
Regards,
Prateek

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

Getting Return values from RFC function call with visual basic

Hi,
I am creating a sample app to connect to a SAP system which call its RFC functions created with ABAP. It was known that the function will return more than 1 return values.
 SAP Function name ==> "ZFMTP_RFC_GET_RESULT"
 Export parameters (to SAP):
 - Student Name [char 10] ==> "STUNAME"
 - Student ID [char 20] ==> "STUID"
 Return values (From SAP):
 - Results [char 10] ==> "RESULT"
 - Remarks [char 200] ==> "REMARKS"
i have managed to get sample codes for connecting and call a RFC function with vb but they only get a return value. How do i retrieve multiple return values like the above function "RESULT" and "REMARKS"?
Here's my vb code to accessing the function
 Dim R3 As Object
 Dim FBFunc As Object
 Dim returnFunc As Boolean
 Dim connected As Boolean
 R3 = CreateObject("SAP.Functions")
 R3.Connection.Client = "000"
 R3.Connection.User = "BCUSER"
 R3.Connection.Password = "minisap"
 R3.Connection.Language = "DE"
 R3.Connection.System = "dtsystem"
 R3.Connection.Applicationserver = "xxx.xxx.xxx.xxx"
 connected = R3.Connection.Logon(0, True)
 If connected <> True Then
 MsgBox("Unable to connect to SAP")
 End If
 FBFunc = R3.add("ZFMTP_RFC_GET_RESULT")
 FBFunc.exports("STUNAME") = "Jonny"
 FBFunc.exports("STUID") = "12345"
 returnFunc = FBFunc.Call() <<== How do i get the return value? or RESULT and REMARKS of the RFC Function?
thanks alot.
Edited by: Eugene Tan on Mar 4, 2008 7:17 AM

Hi Gregor,
Thanks for the link....i am having some doubts with the codes, hope you can clarify them for me if you know the codes..
Below is the code snippet.
Set impReturn = CHPASS_FN.Imports("RETURN") <<=== is RETURN the standard keyword to get a return object?
expPassword.Value = currpass
expNewPass.Value = newpass
expFillRet.Value = "1"
''' Call change password function
If CHPASS_FN.Call = True Then
 outFile.Write (", Called Function")
 Message = impReturn("MESSAGE") <<==== So if i have 3 return values..i just replace with the return value variable names?
 outFile.WriteLine " : " & Message
Else
 outFile.Write (", Call to function failed")
End If
thanks alot...all your help is very appreciated.

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

I bought a iphone 4 from a guy on craigslist, I knew about ios 7.0 having the lock thing, but when I met him, his simcard was in the phone, I tested the phone with his simcard in from of him. The phone looked great with no problems and I even got the box with the accesories, so I knew it was his... I then did the reset on the phone (erase all data... from settings) and it went through and activated and everything was good... I used the phone for about a month with no problems at all, even had my apple ID in the icloud and everything... well ios 7.0.6 came out and I used my computer to restore the phone, because I feel that the cord and computer gives it a better restore, it did great no problems, and when it went to the part where I went to activate the phone, I get a enter your apple id and password to complete activation... Wait... why is this up i thought, I thought I did everything like I suppose to to succesfully switch it to me, the new owner... but now its asking for some C******@yahoo.com.... I only have @gmail.com emails and none start with a C... The guy sold me the phone because he was switching to Verizon, and I tried to call him, and now the number is disconnected... I guess he switched to Verizon with a new number... Now im stuck with a paperweight that costed me $200.00... What can I do at this point... Please help me... I restored it to give it to my Step Son as I just got me the iphone 5... Thank you for ANY HELP in advance... Thank you again.

Need help on RFC look up in PI 7.0

Dear experts ,
I am working on Jdbc to Abap Proxy scenario where i need to perform a RFC Look up . I have searched in SCN and found some help ful blogs, but still need more information in below points.
My requirement is need to fetch Cost Center (KOSTL) by taking Personal number(PERNR) as Input parameter.
1) Do we have to create and import the RFC into PI ?
2) Do we need to create a UDF ? If yes, Kindly provide some useful links.
Thanks in Advance,
Mohammed

Hi indrajit,
i had written : java.util.Map map;" in the import secion of UDF. but still i am getting the following errors
Source code has syntax error: /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:3: cannot resolve symbol symbol : class map location: interface java.util.Map import com.sap.aii.mappingtool.tf3.*;import com.sap.aii.mappingtool.tf3.rt.*;import java.util.*;import java.io.*; import java.lang.reflect.*;import java.util.Map.map; ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:257: cannot resolve symbol symbol : class RfcAccessor location: class com.sap.xi.tf._MM_RMF_TO_SAP_ RfcAccessor accessor = null; ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:262: cannot resolve symbol symbol : class Channel location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Channel channel = LookupService.getChannel(BS_SAP_R3,CC_RFC_LOOK_UP_CRMNEXT); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:262: cannot resolve symbol symbol : variable BS_SAP_R3 location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Channel channel = LookupService.getChannel(BS_SAP_R3,CC_RFC_LOOK_UP_CRMNEXT); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:262: cannot resolve symbol symbol : variable CC_RFC_LOOK_UP_CRMNEXT location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Channel channel = LookupService.getChannel(BS_SAP_R3,CC_RFC_LOOK_UP_CRMNEXT); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:262: cannot resolve symbol symbol : variable LookupService location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Channel channel = LookupService.getChannel(BS_SAP_R3,CC_RFC_LOOK_UP_CRMNEXT); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:264: cannot resolve symbol symbol : variable LookupService location: class com.sap.xi.tf._MM_RMF_TO_SAP_ accessor = LookupService.getRfcAccessor(channel); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:268: cannot resolve symbol symbol : class XmlPayload location: class com.sap.xi.tf._MM_RMF_TO_SAP_ XmlPayload payload = LookupService.getXmlPayload(inputStream); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:268: cannot resolve symbol symbol : variable LookupService location: class com.sap.xi.tf._MM_RMF_TO_SAP_ XmlPayload payload = LookupService.getXmlPayload(inputStream); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:270: cannot resolve symbol symbol : class Payload location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Payload result = null; ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:275: cannot resolve symbol symbol : class DocumentBuilderFactory location: class com.sap.xi.tf._MM_RMF_TO_SAP_ DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:275: cannot resolve symbol symbol : variable DocumentBuilderFactory location: class com.sap.xi.tf._MM_RMF_TO_SAP_ DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:276: cannot resolve symbol symbol : class DocumentBuilder location: class com.sap.xi.tf._MM_RMF_TO_SAP_ DocumentBuilder builder = factory.newDocumentBuilder(); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:277: cannot resolve symbol symbol : class Document location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Document document = builder.parse(in); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:278: cannot resolve symbol symbol : class NodeList location: class com.sap.xi.tf._MM_RMF_TO_SAP_ NodeList list = document.getElementsByTagName("I_KOSTL"); // The lookupValue is available as WA tag in the response ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:279: cannot resolve symbol symbol : class Node location: class com.sap.xi.tf._MM_RMF_TO_SAP_ Node node = list.item(0); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:283: cannot resolve symbol symbol : variable returnValue location: class com.sap.xi.tf._MM_RMF_TO_SAP_ returnValue = node.getNodeValue(); ^ /usr/sap/XD1/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map2d519647b0c211e39616000000844522/source/com/sap/xi/tf/_MM_RMF_TO_SAP_.java:290: cannot resolve symbol symbol : class LookupException location: class com.sap.xi.tf._MM_RMF_TO_SAP_ } catch (LookupException e) { ^ 18 errors
so can you please explain, how can i import those files.

Urgent : Error in RFC Look Up using JCO.

Hi,
I have a scenario od accessing a database table by passing the name through XI and also giving the Where condition ,passing the fieldnames and getting back the field values . The FM that id used for this on ABAP side is RFC_READ_TABLE.
For this Scenario I inserted a Java Code using JCO's in th UDF for the RFC Look Up's.
I got errors while activating the MM which i am not able to rectify.Please Help me in this.
Activation of the change list canceled Check result for Message Mapping MM_Notes_2_ED_Z_SDIDOC |
Starting compilation Source code has syntax error: /usr/sap/EXD/DVEBMGS49/j2ee/cluster/server0/./temp/classpath_resolver/Map303c42607df411dc8b1d00e000c553d9/source/com/sap/xi/tf/_MM_Notes_2_ED_Z_SDIDOC_.java:1539: cannot resolve symbol symbol : method createClient (java.lang.String,java.lang.String) location: class com.sap.mw.jco.JCO JCO.Client mConnection = JCO.createClient("200","EN"); ^ /usr/sap/EXD/DVEBMGS49/j2ee/cluster/server0/./temp/classpath_resolver/Map303c42607df411dc8b1d00e000c553d9/source/com/sap/xi/tf/_MM_Notes_2_ED_Z_SDIDOC_.java:1578: cannot resolve symbol symbol : variable result location: class com.sap.xi.tf._MM_Notes_2_ED_Z_SDIDOC_ result.addValue(resultSet[pos]); ^ 2 errors
This is an Urgent Requirement. Please reply ASAP.
Regards,
Priyanka.

Hi Priyanka,
The error message says there are 2 errors:
1. createClient
2. result.addValue
For the first one, I guess you might not have included all the API required for lookup
For second one, please check what is the type of object you are adding to the resultset, maybe you can just say result.addValue(resultSet[pos] + ""); to typecast it.

I am using firefox 4 and my website looks different in the LCD and Laptop(both with same screen resolutions). The same looks ok with firefox 3.6. Why i am getting this difference?

I am using firefox 4 and i can see difference in the laptop and the lcd. The site looks fine with firefox 3.6 for both and also for all the browsers. Only for firefox 4, things are getting screwed in laptop, as it looks fine for the LCD.
You can see this link as an example.
http://www.automationanywhere.com/products/automation-software-enterprise.htm.
Even the footer doesnt shows the css in laptop, but the same is fine for LCD.
NOTE: I have tested this on most laptops.

Well I see that you and I share the same problem, I posted the same type of question and am anxiosly awaiting replies on this topic, as it is very important
I own a small business, and every hour a customer cannot view my site is a customer lost to incompatibility issues.
I hope someone can help answer these issues.
http://www.siegfriedscall.com

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

RFC Function module-With Only Request message

Hi
i need a RFC with only Request message and Response message is not required.
please help me, how to create a RFC function module with out Response message, and it should contain only Request message.
i have created RFC in this way:
RFC doesn't contain neither import nor export parameters. and i have defined one table in TABLE tab which refers to a ztable created already.
when i imported RFC into XI i came to know that RFC has both Request and Response messages, but i don't need Response message.
Thanks in advance..help would be appreciated
Regards,
Rajesh

Thankx Michal,
I have written ZRFC this way:
insert ZMM_AUTO_GR from INPUT_TABLE .
if sy-subrc = 0.
commit work.
else.
rollback work.
im not using neither import nor export parameters..but using only tables parameters. but when imported in XI im getting same table structure in both request an response.
please suggest what changes required in above code to invoke my ZRFC in async way.
you will not get any response in XI- what chages required in my code to dnt get .reponse in XI.
appreciate your help.
Regards,
Rajesh.

RFC Look Up with MultiMapping in PI 7.1

Similar Messages

Maybe you are looking for