RFC Message Listeners giving "Roll Back Fault " Error

Hi ,
I have configured message listeners in SAP MII to collect control recipe from R/3 using "control_recipe_download". The connection l is working fine but when I try to push the message from R/3 I get an error "Roll Back Fault Not defined type of Handler class" in SM58.
Error Msg in MII log : " [JRA]asynch call CONTROL_RECIPE_DOWNLOAD with TID=AADDF85A47D14ED4ABC8E377 to dest. XMIIRFC01 on system can't be handled by StatefulSynchronousMessageListener"
I have updated the message listeners and restarted the NW server after creating the process message rule.So any other thing I need to check?
SAP Version : SAP R/3 4.6
SAP MII 12.2
Rgds,
Arun
Edited by: arun kurup on Nov 29, 2011 8:02 PM

Spot on Mike ...I had let the binding value blank and after setting it to XMII the messages are coming in MII
But anyways I have three RFC listeners for three different RFC destination but all the message are going to the third listener "XMIIRFC03" !!! The program id , listener update has all been done....I have asked for an server restart hope this solves it.
MII 12.2 with SP2 patch 8 deployed on NW 7.3 SP5.
We have the SAP upgrade on and will be connecting MII to new system soon till then its 4.6
Thanks for helping.
Rgds,
Arun

Similar Messages

Reinstall Elements - "Rolling Back Action" Error

I am trying to reinstall Elements 7. I need to do this because I had a system problem and I needed to do a clean new Windows XP install. As a result of the XP reinstall, I have had to reinstall all my programs.
What happens with Elements is that I get to the screen that says "Registering Product" and the system stops, gives me a message that says "rolling back action" and the installation stops.
I called Adobe install help and they were less than useless. They first had me run the Windows Installer Utility followed by the Adobe CS4 Clean Script. Neither program found any problems and they did not help. They then had me set up a new User ID on my computer and told me to log on as the new user. Again - no joy.
I have successfully reinstalled Elements 3, Lightroom 2,5, Photoshop CS2 and Adobe Acrobat without any difficulty.
When I did a WEB search on this problem, the only useful thing that I found was Adobe Service note kb406851 which talks about removing a cache file. I do have that cache file but the note also says that I may have to reenter the serial numbers for my other Adobe programs. I am loath to take this step.
Any suggestions would be appreciated.
DON

This might be happening because of some of the bits of PSE 7 which didnt got removed from the machine while you removed/uninstalled PSE7.
Try following the steps mentioned in the below link and make sure that all the bits have been removed and then try to install PSE7 again.
http://kb2.adobe.com/cps/405/kb405847.html
Regards,
Ankush

Messages button giving "Service not configured" error

Hi,
I have created my voice mail ports, LG,HL and HP. I also created voice mail pilot and profile, assigning the pilot to profile and then assigning profile to the line of the IP Phone.
I can dial the pilot number and voice mail port numbers, but when I push the "Messages" button on the IP Phone, I get service not configured. I looked at enterprise parameters for messages and noticed that the URL was missing. Can someone post what the URL should be for messages under enterprise parameters?
Any other ideas as to why I am getting this error?
Cheers

Did anyone find the answer to this issue?
I have a similar issue with a differrent service (one button login for ipcc).
When I hit the services button on my physical 7965 phones it states no services are configured.
If I press the services button on my CIPC softphone it works fine.
The 7965 is connected to a 3560 switch and a 2811 router.
The configuration is exactly the same for both phones and both phones are subscribed to the service.
All help will be greatly appreciated.

Often your updates are horrible! Offer easy ways to roll back your errors!

Firefox 20 is a bad joke. From now on, I am disabling automatic updates. I don't care about security from FF. I have done other things that keep me secure; I don't need bad programming messing up my browsing.
I like the flexibility of FF, but your highly frequent updates have led to mistakes, and a poor user experience. Please be more careful and release new major updates no more often than once every six months.
As for me, there is a javascript error that pops a box up, saying "Error: missing ( after for" every few seconds. Really annoying, to the degree that I might switch to Chrome.

Both of you need to do some basic troubleshooting to find out the '''real cause''' of your problems related to the Firefox 20 update, which is probably an issue with an add-on you have installed.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
If not, see this: <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems]

PSE11 - installing error 1935 rolls back

I have tried several suggestions to install PSE 11 on my Windows 7 computer, without any success. The installation stops, rolls back, and error 1935 shows up. Adobe, nor Microsoft, seem to have a clue on what will work on my machine. Some suggestions get too deep into the computer for me to follow. Since I am not that advanced in tinkering in areas that I could screw up the parts of the machine that works, I wonder if Windows 7 has a problem that cannot be fixed. Others have experienced the same issue with error 1935.
I am not willing to try Windows 8 if Microsoft cannot fix this problem on 7.
For now I am stuck without my new version of PSE being usable.

The following article is for Acrobat or Reader but might work for you:
http://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html

LabVIEW 4.0 Invalid Page Fault Errors

I've got myself stumped on this problem - we had a LabVIEW based PC/DAQ system that started giving invalid page fault errors and crashing in Win95. This may have been concident with a revision to a vi file. To rectify the problem I've tried the following:
1. Reinstall LabVIEW 4.0 with NI-DAQ 6.6
2. Wipe HD, reinstall Win95, LV 40, NIDAQ 6.6
3. Full HD scan and MEMTEST86 memory test
4. Install on another PC
The PCs are P5-60 Gateways with 128 MB of RAM. DAQ config is 1 AT-AO-10 and 1 AT-MIO-16DE-10
Nothing seems to help. With a reinstall of LV40, I can get it to run, but once I copy the .vi files back into User.lib LV crashes.
Does LV40 look in User.lib upon startup and crash if it finds something it doesn't like? A corrupted vi?
Thanks!

Blair Hogg wrote:
...guess the next step is to go in and load each .vi manually to see if there is one that is causing problems. Hopefully some of you out there are finding this somewhat interesting, and I'm not just cluttering up the forum...
Hi Blair Hogg,
I like your sence of humor ;-) Don't worry, even if nobody reads your
thread (well... I just did) you need to write MUCH more for it to be
considered clutter. Now, if you had created 25 duplicates of the same
thread, then we would be talking about cluttering...
I'm curious about this issue even thought NI only supports LabVIEW two
versions back - officially. My guess is that a VI is corrupted and
kills LabVIEW when the VI loads. Therefore I do aggree that the
procedure from now on is to load every single VI one by one and then
notice what VI will make LabVIEW crash. I might be able to repair that
VI if you submit it to the thread.
Another thing to try is to mass compile the user.lib. The log after the
mass compile will show if any VIs were bad or had problems getting
compiled.
Well, I hope you find the source for this issue - even if I'm the only one that cares ;-)
Have Fun!
- Philip Courtois, Thinkbot Solutions

Memory fault error while converting .fmb to .fmt

Hi all,
When I tried to convert .fmb file to .fmt(text format) file in unix its giving me Memory fault error.
Command I am using is
f60gen module=INTG_TEST.fmb userid=apps/xxxxxx@DB1 forms_doc=yes batch=yes
Where as from form builder I can do it without any error Administration->Convert->
Can anybody please let me know ?
Thanks,
Dev

Thanks... But when i use parse=yes its creating .fmx
able to generate .fmt for some .fmbs with forms_doc=yes its not working for some .fmbs
I am using forms 6.0.8.11.3 with linux 2.6.9-78.0.13.0.1 ab
Pls. let me know if there is any other way to generate .fmt
Thanks

ALSB 3 roll back a transaction without sending a fault message

Hi,
I have a proxy service exposed as a web service, which has some operations that call some tuxedo systems, do some transformation of the data, etc.
When any of it's operations is invoked I have to build an XML reply in both success AND error cases. The difference between both is a response code, if the call to the backend tuxedo system responded with a stream that starts with OK then everything is fine and I build the reply and send it back, but if an error ocurred it will send back an stream that starts with ER followed by an error code, with which I will have to build the SAME XML but using this error code and send it back to the client instead as a "successful" invocation instead of sending a SOAP fault message. Also I need to roll back the whole transaction in that error case. The system works like that and it can't be changed, we are building this proxy service based on a WSDL file given to us by the partner company that invokes our service and there's lots of other clients that do it in the same way. The problem is that I haven't found a way to roll back the transaction without making the proxy service send a fault message that the client system won't understand. The "Raise error" and "Reply with failure" do roll back the transaction but both send a fault message. Is there a way to answer "successfully" to the client but make an explicit rollback?

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Error message after downloading and install rolled back (using up data limit)

error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?

Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
Raviteja

Hi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K

Can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this tim

can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

How do I Uninstall Adobe PSE9? All I get is an error message, "Error 1316. The specified account already exists". Then the Unistaller rolls back and the program just sits there, partially uninstalled and unusable.

I have upgraded to PSE13 and want to unistall PSE9. When I try to do this all I get is an error message, "Error 1316. The specified account already exists". Then the uninstaller rolls back and I am left with a partially uninstalled version that is unusable. I tried to reinstall the software from the original PSE9 disk but all it tries to do is uninstall the version already on my computer, and this then does the same thing as noted above. How do I completely uninstall PSE9?

See here:
How do I remove older versions of Photoshop?

MQ message is not coming back in MQ in case of error in Global Transaction

Hi,
```````````````````````````````````````````````````````
I am using Oracle JDeveloper 11.1.1.5.0 and SOA server 11.1.1.5
```````````````````````````````````````````````````````
Use Case :_
I have created a Sync BPEl process. In which I am dequeing the messages from MQ using "Get Messages from MQ" Operation available in MQ series Adapter. Also checked the Synchronous check Box, So that we can have the Ondemand dequeing of Messages.
Three Properties have been added In Composite.xml file to make the MQ adapter service participate in Single global transaction :
<property name="*bpel.config.transaction*">required</property>
<property name="*bpel.config.oneWayDeliveryPolicy*">sync</property>
<property name="*partnerLink.SyncReadMQ.transaction*" type="xs:string" many="false">participate</property>
(this last property is added in the partner link of the MQ series adpater, And hence refleacted in the composite.xml file)
Also provide the MQ Adapter configuration XATransaction='true' in Admin console, to support the Global transaction by following the Oracle Doc (http://docs.oracle.com/cd/E17904_01/integration.1111/e10231.pdf)
Issue :_
In case of any system error, The Message is not going back into the MQ and it is lost. My concern is that if I have made the MQ adpater service to participate in the global transaction of the Main BPEL process then upon any fault occur the Adapter service should be rolled back. but it is not happening.
I want the message back in the Queue in case of any error.
Would anyone please help me in this issue.+
`````````````````````````````````````````````````````````````````````````````````````````
One more thing to notice is that MQ Adapter is a transactional adapter it should participate in the rtransaction.
`````````````````````````````````````````````````````````````````````````````````````````
Thanks
Sunil
Edited by: 856749 on May 17, 2012 10:57 AM
Edited by: 856749 on May 18, 2012 7:34 PM

Hi All,
Still this thread is unanswered, Is there any genius who has done Transaction handling on Adpaters (MQ or JMS). I have look into may threads on forums, but no appropriate information is given about this issue. If this thread is been answered then it will be very helpfull for othes dealing with transaction in MQ.
Thanks
Sunil

Instance roll back while validating the XML message using Mediator

Hi all,
I am facing issue when calling a mediator process in validating the XML before invoking the target application
Below is the error for the instance.
com.collaxa.cube.engine.EngineException">
Global retry rollback fault thrown.
The current JTA transaction is aborting due to an user rollback fault being thrown. The upstream component should retry in a new JTA transaction upon catching this fault.
This exception was caused by a global retry fault being thrown from downstream component. The user had directed the BPEL engine to roll back the current JTA transaction and retry within new JTA transactions for the specified number of times and retry interval.
There is no action recommended.
-<stack>
<f>
com.collaxa.cube.ws.WSInvocationManager.invoke#334
</f>
<f>
com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke#1070
</f>
<f>
com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke#584
</f>
<f>
com.collaxa.cube.engine.ext.common.InvokeHandler.handle#132
</f>
<f>
com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements#74
</f>
<f>
com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform#166
</f>
<f>
com.collaxa.cube.engine.CubeEngine.performActivity#2687
</f>
<f>
com.collaxa.cube.engine.CubeEngine._handleWorkItem#1190
</f>
<f>
com.collaxa.cube.engine.CubeEngine.handleWorkItem#1093
</f>
<f>
com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#76
</f>
<f>
com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#218
</f>
<f>
com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#297
</f>
<f>
com.collaxa.cube.engine.CubeEngine.endRequest#4609
</f>
<f>
com.collaxa.cube.engine.CubeEngine.endRequest#4540
</f>
<f>
com.collaxa.cube.engine.CubeEngine._createAndInvoke#713
</f>
<f>
com.collaxa.cube.engine.CubeEngine.createAndInvoke#560
</f>
<f>
</f>
</stack>
</exception>
-<root class="oracle.fabric.common.FabricInvocationException">
java.lang.NullPointerException
-<stack>
<f>
oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process#1006
</f>
<f>
oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post#663
</f>
<f>
oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost#142
</f>
<f>
oracle.integration.platform.blocks.mesh.MessageRouter.post#197
</f>
<f>
oracle.integration.platform.blocks.mesh.MeshImpl.post#215
</f>
<f>
sun.reflect.GeneratedMethodAccessor2091.invoke
</f>
<f>
sun.reflect.DelegatingMethodAccessorImpl.invoke#25
</f>
<f>
java.lang.reflect.Method.invoke#597
</f>
<f>
org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection#307
</f>
<f>
org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint#182
</f>
<f>
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed#149
</f>
<f>
oracle.integration.platform.metrics.PhaseEventAspect.invoke#59
</f>
<f>
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed#171
</f>
<f>
org.springframework.aop.framework.JdkDynamicAopProxy.invoke#204
</f>
<f>
$Proxy341.post
</f>
<f>
oracle.integration.platform.blocks.local.LocalInvocationProcessor.post#211
</f>
<f>
</f>
</stack>
{code}
I have some knowledge in transaction but this no where in my picture. In bpel process no where i mention transaction is* required* for the mediator component and my mediator is one way asyn process.
Also i defined catch all activity in my bpel and if some thing happen it suppose to move to catch all block but it didn't happen here.
I look forward from some one to help me in resolving in this.
Appreciate some one help here.
Regards,
Tarak.

Thanks for the prompt help. Is there any other way instead of removing the DTD line ?. Because the xml is coming as a string and removing the dtd and then adding it will unneccesary hamper performance. Do you any other way in which even though I don't remove the line I get the output without removing the dtd line ?.
thanks and regards,
Sachin

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.

When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name:             APPCRASH
Application Name:                  iTunes.exe
Application Version:               10.4.0.80
Application Timestamp:          4e262cfr
Fault Module Name:               QuickTime.qts
Fault Module Version:             7.70.80.34
Exception Code:                     c0000005
Exception Offset:                    00146b30
OS Version                                                            1033
Locale ID:
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information4:          0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.

Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142

RFC Message Listeners giving "Roll Back Fault " Error

Similar Messages

Maybe you are looking for