RFC monitoring in CCMS if the patch level R/3 release 4.6C ?

Hi all,
FOr RFC monitoring is possible in CCMS if the patch level   R/3 release 4.6C ?
    ST-PI 2005_1_46C
    ST-A/PI 01M_R3_46C
    SAP_NOTES 46C
    SAP_HR 46C
    SAP_BASIS 46C
    SAP_APPL 46C
    SAP_ABA 46C
Please let me know the requirements for configuration?
Regards,
Neni

Hello Neni,
It certainly seems possible to Monitor RFCs in relearse R/3 4.6C for tRRCs and qRFCs.
Check your CCMS setup guide
You can
1. Start TX RZ20.
2. Open monitor collection SAP CCMS Monitor Templates.
3. Open the Communications monitor.
4. Choose Extras -> Maintenance functions on.
5. Mark the MTE 'Transactional RFC and Queued RFC'.
There you can edit your hosts.
You can restart the Monitor immdiately with transaction RZ2.
Hope this is helpful.
Regards,
Paul

Similar Messages

RFC monitor with CCMS

Hello,
I'm implementing RFC monitor with CCMS and I have a problem.
I was able to implement the method with an auto-reaction method of send mail.
It is working fine but it doesn't repeat the alert! Let's say, imagine that the RFC isn't working since 3am... we are now at 13pm and the alert is not triggered anymore. In fact, in RZ20 I just see 1 Alert triggered at 3am.
Is there any way to set this alert to trigger every period of time?
thanks.
regards,
Filipe Vasconcelos

Hello,
first it would be good to clarify which monitor are you implementing - there are multiple RFC monitors - for example:
Availability and Performance Overview Monitor :
http://help.sap.com/saphelp_nw70/Helpdata/en/ae/cd823bd26a5c42e10000000a114084/frameset.htm
Transactional RFC and Queued RFC Monitor
http://help.sap.com/saphelp_nw70/Helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Best to type the name of monitor as displayed in RZ20.
Based on the type of monitor you might find the answer here:
http://help.sap.com/saphelp_nw70/Helpdata/en/f6/c55c3bab977239e10000000a114084/frameset.htm
(for example for status monitor you can set option "When should a message trigger an alert?" to "Always (at every message)")
Anyway I am afraid that in case you are using performance monitor there is not much you can do. Possibility can be to check if data collection method (for example function) has parameter that can do this (but I am skeptical about this) - if not then you would have to adjust data collection method or implement the monitoring in another way.
Possibility can be to use some kind of "switch". You can activate option "Display All-Clears in Alert Browser" - this will generate green alerts. Then you can program your own autoreaction method that will perform the "switch operation" (simple insert/update/delete into some Z-table you will create - based on status of alert - red/yellow/green.) Then you can have batch job running another Z-program that is reading this value and constantly reminding use via email.
If you program this in a good way (abstract autoreaction method) - you can reuse this solution for other monitors as well and easily buid you own email notification functionality.
I hope it helps.
Best regards.

Regarding the patch level..

Hi All,
This is krishna, I created two types of add-ons.. One is, In the exiting form only i created some more fields.. Another one is, newly created user defined forms and in which some fileds.. It is working fine.. Later i upgraded the patch level 5 to 40 for client requirement. When ever i upgrade that patch level, my second type of add-on are not working.. That is its not opening forms.. What happend i don't know..
If anybody knows the solution.. Plz let me know...
Regards,
krishna.v

Your question is more related to SDK for your own add-on. Please post it there.
Thanks.
Gordon

How to find the patch level of a BI 7 system.

Hi Experts,
I am not able to add navigation attributes to an info cube in BI 7 system ....does the patch level applied to the system effect this functionality ? if so how can we upgrade the system?
How can we find the patch level details of a SAP BI 7 system ? The release notes doesnt give any information in regard to the patches. Is there any direct way of getting this information by ourselves without contacting the basis team.
Kindly let me know your valuable suggestions.
Thank you and much appreciated.
Regards,
Sharanya.

Hi Bala and Teja,
Part of my question was answered , Thank you for your help.
I see that the patch level is 17 on our BI 7 system..........but does it effect the functionality to add a navigational attribute to an info cube?
Can you suggest me any possible reasons for this issue, and also any solutions if you have please.
Thank you and much appreciated.
Regards,
Sharanya.

RFC Monitoring using CCMS

Hi All,
We need to configure RFC availablity Monitoring in CCMS of our Solman system for our PRD satellite system.
In PRD, We have created data collection method Z_CCMS_RFCDest_Availability_Trex which is using SALK_RFCDEST_AVAILABILITY as function module,
Parameters in collection method are :
COLL_METHOD            Z_CCMS_RFCDest_Availability_Trex
RFC_DEST                   TREX_ES3_NWPRFI
MTE_CLASS                Availability_RFC_Destinations_MA_Clas
CCMS agents are running fine in Solman and PRD. Now I expect that in Solman->rz20->PRD I should get Node like:
PRD\Availability\...\RFC-Destinations\TREX_ES3_NWPRFI
But I do not see any node there, It is blank screen on rz20 of this system.
Please suggest what I am missing to complete the configuration part.
Regards,
Shivam Mittal

Thanks Gary,
I haven't seen this no where would I find it. Had a quick look on the market place and can't find it!
Chris
Just to add were using Netweaver 2004s
Message was edited by:
        Chris Soden

How do I see the Kernel patch level in Java ONLY instance?

Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor

Where is the information about "Patch Level" of a particular version

Hi all,
Where I can see what is the latest "Patch level" of a particular version of tuxedo. For example, what is the latest patch level of tuxedo 9.1, where I can find it out?. This information is public ? We need a oracle contacts?
thanks in advanced

MBriz,
The number at the start of last line in $TUXDIR/udataobj/patchlev is the Tuxedo patch level. (If there is no $TUXDIR/udataobj/patchlev file, then you are running the General Availability version of Tuxedo.)
This information is also available by executing "tmadmin -v".
A third way to get the information is to look at the first line printed by the BBL in the userlog on a particular day, which will be something like "09-30-2010: Tuxedo Version 10.3.0.0, 32-bit, Patch Level 041". (Other processes' first ULOG message of the day will indicate the Tuxedo Version, but will not include the patch level.)
Regards,
Ed

Should we follow the sequence while upgrading to latest patch level?

Hello,
While applying patches in any module say HR,if my current level is SAPKE60028,Can I dirrectly download SAPKE60034
& upgrade it or should I follow the sequence?
SAPKE60028,SAPKE60029,SAPKE60030,SAPKE60031,SAPKE60032,SAPKE60033,SAPKE60034.
Regards,
Rachel.

Hi Rachel,
You cannot directly upgrade from a lower level SP level to higher SP level directly for ABAP stack by skipping the ones in between.You will have to follow the sequence and it will also not let you to proceed say from SAPKE60028 to SAPKE60030 unless you have the SAPKE60029 in between.The prior level is checked as a prerequisite in order to advance to the next level.
However, for JAVA statck upgrade it is possible because in Java whatever patch level u choose it is consolidated.For instance, if you are at patch leve 12 at present and want to upgrade to level 17 then the patch level 17 is a consolidated package consisting of all the levels from 1 to 17.While upgrading it removes all the existing previous SP and deploys SP level 17 right from the beginning i.e level 1 to 17.
Thanks,
Saby..

SAP patch level to change the Gratuity Tax ceiling

Dear friends,
What is the patch level to change the Gratuity Tax Ceiling.

HI
There are not many changes reported in Gratuity from long back since year 2008. There is a new note on Superannuation and ESOPs(Note 1396661 - New Perquisite Rules in Budget 2009-Superannuation & ESOP's) but no new note on gratuity. The last note on gratuity i.e. Note 1115073 is valid from 16.01.2008 and from patch level 27.
The latest patch available is SAPKE60056 but you can have gratuity calculation in as low as SAPKE60027.
Regards
Vikas K Sharma

How to understand patch level

Hi experts.
I have this problem.
In my development portal, I see, under the System Administration->System Configuration->Collaboration the entry "Transports"
Instead,
in my production portal, I see, under the System Administration->System Configuration->Collaboration the entry "Groupware Transports"
The systems are EP 7.0 SPS level 17 but I have some doubts about the same patch level.
How can I see which is the patch level component of the above mentioned entries "Transports" and "Groupware Transports" ?
Thanks for your help.
Mario.

Mario,
https://wiki.sdn.sap.com/wiki/display/EP/Howtofindoutportalversion%2Cpatchlevelinformation%2Ccomponentsinstalledandsystemlevelinformation
Try accessing this url for your portal http://server:port/sap/monitoring/ComponentInfo with a System Admin Id
Good Luck!
Sandeep Tudumu

How do I check if I need SAP GUI 7.10 Patch-Level 7?

Hi,
I have installed SAP GUI 7.10 client.
After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
My version for the SAPGUI installer is 2008.0.0.187
From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
Does anyone know if my SAPGUI would require Patch-Level 7?
Thanks.
HY

Thanks for replying.
This is my SAP logon info, do it looks alright?
Release: 710 Final Release
File Name: saplogon.exe
File Version 7100.1.0.1027
Build: 0
Patch Level: 0
These are my installed component. Could it be that none of the below components need to be patched?
1. SAP GUI Suite
2. R/3 Add-on
3. General Add-on
4. Legacy Components
5. CRM Add-on
Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

How to determine 640/J2EE Startup Framework Binary Patch Level?

Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
Greg

Hi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release                700
kernel make variant           700_REL
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              UNICODE
compile time                  Jan 23 2008 20:42:28
update level                  0
patch number                  128                         <<< Here is the patch number>>
source id                     0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
   Support Packages and Patches ->
   Entry by Application Group "
   SAP NetWeaver and complementary products"
   SAP NETWEAVER" SAP NETWEAVER 7.0"
   Entry by Component"
   Application Server Java
   ===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder

Adapter Monitoring with CCMS

Hi,
is there anybody who already set up an adapter monitoring with CCMS using the alert framework of Runtime Workbench ?
Background:
When using the existing MTE's in CCMS (J2EE Monitor Templates - All Systems - <SID> - J2EE Applications - SAP XI Adapter Engine) only rare monitoring information related to XI messages are posted.
What I would like to see are information about the adapters provided in the logfiles of each adapter.
For example as soon there's a permission problem for a directory in File Adapter an alert in CCMS should be raised.
I already checked SAP notes 870232, 913858 and 824039.
Any feedback appreciated.
Cheers,
Juergen

Hi,
You can configure the CCMS as per the following two blogs,
Part 1: /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Part 2: /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configure the Alert Framework with the below Blog as reference,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Then forward the Alerts created in the CCMS to Alert Frame work, the required steps are given in the below help links.
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/30/62e77b2f4865488a866d4103923a93/frameset.htm
Then any alerts that gets generated in CCMS can be passed to the Alert Category kept configured in the Alert Framework.
Hope this helps you

Latest Patch Level in Sap HCM ECC 6.0

What is the latest patch level that one should apply for Sap HCM ECC 6.0.?
What are the disadvantges of not updating the patch levels?

Check the navigation path -
goto service.sap.com -> click on SAP Support Portal (on left panel first link) -> You will get the Support portal home page, here the 3rd tab is Software download(click on software download tab) -> On left side of web page you will get Support Packages and Patches as second link -> after clicking on it, you will get link for A-Z index (click on it)-> Now on the right panel you will get the a to Z index, since you are searching for HR, select H -> in the next page select third link HR Country Legal Change Packages -> Now select the component as per the applicability(EA-HR, HR-CEE, SAP-HR).
You can check the following link -
Re: support pack
Disavantage may be that the new feature which has non source changes may not reflect completely and force you to do some manual changes.

Patch Level not reflecting in Support Package Levels after applying

Hello,
MDM_TECH 555_700 patch 01 are applied to A65. But the patch is not
getting reflected in the package level.
We are still unable to view the component in OCS queue, even after
uploading the component. Still the MDM_TECH 555_700 is showing
the patch level 0.
Please provide any solution to make the patch level reflect.
Thanks & Regards
Vijay

Hi Chaitanya,
I'm facing the same issue. We are upgrading Solution Manager 7.0 to EHP1. I cannot implement the Notes 791984 , 1015068 and 1022755 since the OCS is locked with the error in DDIC_Activation. Could you please let me know how did you implement the corrections?
Cheers,
Savitha

RFC monitoring in CCMS if the patch level R/3 release 4.6C ?

Similar Messages

Maybe you are looking for