RFC_NO_AUTHORITY dumps
Hi Techies,
We are facing one issue with the RFC_NO_AUTHORITY dumps . We checked and found that as per the dump there is authorization missing for some function groups in the object S_RFC. User type is "System" and the client is 000. SInce 000 doesn't have any customized roles, We have provided access through SAP given roles. But still we are getting dumps for the same function groups.
Please suggest how to proceed with this issue.
Hi Vijay,
Check the dump and you can find function groups for the object S_RFC having no auth.
Are these function groups custom developed ? if yes, then i will say also review why then need to connect to 000 client ?
If anyhow you have to provide access, you can also add standard profiles/roles to user which you should find it first with SUIM if the selected profile/role has missing auth.
thanks
ashish
Similar Messages
-
RFC_NO_AUTHORITY - dump
Bonjour guys,
I am getting a dump:
RFC_NO_AUTHORITY
User "TMSADM" has no RFC authorization for function group "SEUEXIST".
How to correct the error
You can check the RFC authorization beforehand with the
function module AUTHORITY_CHECK_RFC.
Any suggestions ?
Thanks,
J.Hi,
this is RFC user ID problem. RFC user ID has no authorization to execute.please try to ask basis team.
please refer below blog this will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/4f/b541d812aea34695d54758cec0796f/frameset.htm
regards,
ganesh. -
Thousands of abap dumps RFC_NO_AUTHORITY
Hello All,
Today suddenly we are getting thousands of abap dumps in Prdocution system and the details are below :
RFC_NO_AUTHORITY
What happened?
The user "PLIM" attempted to execute a function module from
the function group "SDIFRUNTIME", but does not have the appropriate
RFC authorization.
Error in the ABAP Application Program
The current ABAP program "SAPLSDIFRUNTIME" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The ABAP program "SAPLSDIFRUNTIME" attempated to execute a statem
the system automatically checks authorizations and for which the
user "PLIM" has no authorization.
The application program did not take the missing authorization
into consideration and the program must therefore be terminated.
And we checked the RFC conncection and its fine.
Please help me to resolve this ASAP as its an high priority issue.
Chinna.hi,
Please check the following
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/ac6440549ac249e10000000a1550b0/content.htm
and also provide the user with full RFC authorizations.
Thanks
Suresh Aithagani -
RFC_NO_AUTHORITY ABAP dumps coming very frequently
Hello
We are getting abap dumps in Production system and the details are below :
RFC_NO_AUTHORITY
ABAP dumps RFC_NO_AUTHORITY are coming very frequently in the Production system. The dumps are occurring for user ID "SOLM_REMOTE" in DBCI only. This dumps comes every hour from Sep to till date. Also in the short text it has mentioned, User "User "SOLM_REMOTE" has no RFC authorization for function group "TMW_TRACKING". The termination occurred in the ABAP/4 program "SAPLTMW_TRACKING " in "TMW_VERSION_TEST". The main program was "SAPMSSY1 ".
Provided the RFC authorization for function group "TMW_TRACKING" for the user SOLM_REMOTE.
The user SOLM_REMOTE has all the authorizations.From the authorization perspective everything seems to be fine.
But still we are getting many RFC_NO_AUTHORITY abap dumps frequently in production system.
Please help me in this regard.
Many thanks in Advance.
Regards
Sreedhar Reddy.Hai,
Please check the below link, it might help you.
http://help.sap.com/saphelp_nw04/helpdata/en/4f/b541d812aea34695d54758cec0796f/frameset.htm
Regards,
Yoganand.V -
RFC_NO_AUTHORITY error for user SAPSYS in client 000
Hi
I have a lot of abap dumps in ST22 RFC_NO_AUTHORITY error for user SAPSYS in client 000 for today which I'm not sure what they mean. I don't have a SAPSYS user in client 000.
The reason that I'm concerend is we had an incident with the SAP server last night where it became unresponsive about 2.30 am and had to be manually rebooted this morning. The R3 jobs all ran OK but the BW loads failed and had to be re-run this morning. There were no unusual jobs or programs running last night and the Server Event Log does not contain any further information as to the probable cause of the problem.
I'm not sure if this error is related to the BW jobs running and was wondering did anyone come accross it and what it means.
Thanks
SiobhanCheck notes 944615 and 93254.
Rich -
RFC_NO_AUTHORITY......urgent
Hi all,
when client tried to open the Bex analyser he is getting the error "run time error 61704 application error".When i tried and checked in st22 i could see the short dump "RFC_NO_AUTHORITY"
The detailed short dump is as below,
ShrtText
User "SETHERINGT" has no RFC authorization for function group "RFCH ".
What happened?
The user "SETHERINGT" attempted to execute a function module from
the function group "RFCH ", but does not have the appropriate
RFC authorization.
Error in ABAP application program.
The current ABAP program "SAPLRFCH" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The user "SETHERINGT" has no RFC authorization for the function group
"RFCH ". Please contact your system administrator to give you
the RFC authorization for the required function groups (e.g. "RFCH ").
The RFC authorization object is S_RFC.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The ABAP/4 program "SAPLRFCH" attempated to execute a statement which directs
the system to check authorizations, but user "SETHERINGT" has no
authorization for this.
The application program could not verify the missing authorization,
so the program had to be terminated.
How to correct the error
You can check the RFC authorization beforehand with the
function module AUTHORITY_CHECK_RFC.
For example, you can do check the RFC authorization of user "SETHERINGT"
for the function group "RFCH ".
System environment
SAP Release.............. "640"
Application server....... "mrcbwprd1"
Network address.......... "192.168.249.183"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x AMD64 Level"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "MRCBWPRD1"
Database type............ "MSSQL"
could anyone let me know how to resolve this iuuse.........its very urgent.
Many thannks..points will be assigned
ManjulaHi,
Run SU53 and then check if the user is missing the Authorizations
and also check his profile whether user is missing the any authorzn objects(S_RFC)
Also refer
http://groups.google.co.uk/group/microsoft.public.office.developer.vba/msg/88008a329bfab695?q=runtimeerror'61704'+SAP&hl=en&lr=&rnum=1
Thanks -
Getting AB0 Run-time error "RFC_NO_AUTHORITY" occurred.
We are using ecc5 with oracle 9i and windows 2003. I am getting dumps every day at same time and error AB0 Run-time error "RFC_NO_AUTHORITY" occurred.
.Please suggest how to correct them step.
Details Page 3 Line 29 System Log: Local Analysis of sap 1
Time Ty. Nr Cl. User Tcod MNo Text
20:50:59 DIA 01 000 TMSADM R68 Perform rollback
Details
Recording at local and central time........................ 04.11.2008 20:50:59
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1Problem class....... W Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000232200
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R6 8
Variable parts...... ThIRollroll bathxxhead1240
Details Page 3 Line 30 System Log: Local Analysis of sap 1
Time Ty. Nr Cl. User Tcod MNo Text Date : 04.11.08
20:51:01 DIA 01 000 TMSADM
*AB0 Run-time error "RFC_NO_AUTHORITY*" occurred
Details
Recording at local and central time........................ 04.11.2008 20:51:01
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abrfcfun
Line................ 3686
Error text.......... ab_RfcAuthorityCheck
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. RFC_NO_AUTHORITY
Technical details
File................ 000048
Position............ 0000232560
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_RfcAuthorityCheck abrfcfun3686
20:51:01 DIA 01 000 TMSADM
AB1 > Short dump "081104 205101 sap TMSADM " generated
Details
Recording at local and central time........................ 04.11.2008 20:51:01
Task................ 04124 . 01 D1 Dialog work process No. 01
User................ TMSADM
Client.............. 000
Terminal............ hodt084
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... SABP
ABAP Mini dump
Date................ 20081104
Time................ 205101
Host................ sapsm
User................ TMSADM
Documentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
Technical details
File................ 000048
Position............ 0000232740
Entry type.......... s ( ABAP Runtime Error )
Message ID.......... AB 1
Variable parts...... 081104205101sapsm TMSADM
Regards,Please find the Sqlnet.ora file details.
sqlnet.ora
Filename......: sqlnet.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
NAME.DEFAULT_ZONE = WORLD
SQLNET.EXPIRE_TIME = 0
SQLNET.AUTHENTICATION_SERVICES = *(NTS){*code}TCP.NODELAY=YES
*If i changes NTS to None then there is and error*
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\soladm.SAPSM>SQLPLUS
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 7 22:14:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: /as sysdba
ERROR:
ORA-01031: insufficient privileges
Regards,
Shiva
Edited by: SHIVA on Nov 8, 2008 11:56 AM -
RFC_NO_AUTHORITY during ChaRM Activation for SolMan project
Hi experts,
We are trying to create a solution manager project and activating ChaRM for the project. Upon project creation, this error occurs:
Landscape being used is: SCM Dev > SCM Test > Virtual System PRD (based in the solman system where this project is created). RFC_NO_AUTHORITY issue is being faced under the SCM Dev System. (*DD)
Any help would be appreciated. Thanks!
Thanks!Hi Luigio,
Please check the below note
93254 - RFC short dump RFC_NO_AUTHORITY
Rg,
karthik -
Lock ups and dumping psyical memory!!!
Hi i have just installed a new pc most of the stuff im useing is from my old computer so i know they work fine im running a:
P4 3GHZ Prescot 800MHz, HT-Enabled
865PE Neo2-P
512 DDR-400 Twin moss
ATI Radeon 9000 pro
PSU-400
XP Pro
My computer locks up alot when running intense games (games have worked before no problem) i also get a error saying dumping pysical memory, i have looked about and tried to solve this myself, i found that someone was haveing the exact same problem as me and he fixed it by turning the FSB down as his memory wasnt compatable with his motherboard if doing that works how do i do it ?
Many thanks JonathanFlappa, Your memory " clock" is fine and there is no need to "underclock it" as long as you did not mess with the Bios.
I had the same problems. I could not even get thru a Clean install of windows as it would Blue Screen
1- are you running in " Dual Channel Mode"?
2- If so is your memory a " match Set"?
some times memory even thought it has the same markings is not matched . Dual channel sets are matched and made to run together in "Dual Channel Mode"{
( Even though I had the same manufacturer memory my set would not run in Dual Channel without " Blue Screening" I bought a Matched Set of Kingston Valueram and have not had a problem since
3- If it is not a matched set, pull one stick out and run it for a while , if it still bluescreens try the other stick
4- raise your memory voltage to 2.7 or 2.8 ( which ever is the lowest that it runs stable)
5- If all this does not work , run MEMTEST to see if there is a problem with both sticks
6- you are running a Bios Version that supports the " Prescott Microcode" right?
Let us know what your findings are
Good Luck
Dave -
Report J_1IEWT_CERT getting cancelled, generating ABAP dump!
A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
Error analysis
When changing or deleting one or more lines of the internal table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
At the time of the termination, the table contained 17008 lines.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TABLE_INVALID_INDEX" " "
"J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
"FILTER_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...Have you checked these notes ?
363107 Short dump occurs during TDS certificate printing.
803806 Error while genrating TDS certificate 03.01.2005
1066049 J1INCERT - Error while generating TDS certificate
Regards,
Subhash -
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Short Dump while scrolling in a maintenance view
A maintenance view has one field, defined as "Radiobutton".
1) Select the radiobutton for one entry.
2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
4) On scrolling up again the short dump occurs.
The short dump text says "More than one radio button is active".
Any inputs in this regards are appreciated.
Thanks.
Gajendra.Hi,
that means you are trying to make two radio buttons active.
parameters: ra radiobutton group g1 default = 'X',
rb radiobutton group g1.
ra = 'X'.
and rb = 'X'.
in your case so obviously it will dump.
check your coding..
and show your code...
Regards
vijay -
Is it possible to create manually a dump?
Dear all,
I have a question about Dumps created in SAP while programs run with unpredicted errors.
I have a specific table defined in the dictionary which has two coloumns progId and path.
The first one is a unique identifier given to a program and the second column is an absolute path on the
unix server where SAP is installed.
For example
MyProg | /usr/tmpbatch/data/E200
Means that the ABAP program named 'MyProg' will run and its output file (the output of the program) and the
log file are created in /usr/tmpbatch/data/E200.
In each of my programs, first of all I check the content of this table in order to ensure that the path is defined for the
given program (and therefore I may be able to create avec success both output and log files). If there is no entry
in the table for the given program, I leave the program by calling the STOP instruction.
My programs run at night, so the next day the corresponding users read the content of the generated output/log files.
As a result, if the path is not defined properly for a given program in the table, the program is not run and therefore
there will be no output/logfile the next day.
My question is How can I inform the user who arrives the next day observing that one program has not been run? How
can I tell him by some kind of system message that the program exited because the path for the files had not been defined in
my table?
Each morning, we can analyse the dumps which were produced during the precedent day. So that we may know
(approximately) what went wrong. But as far as I know, dumps are generated automatically by the system. Is it possible
to generate a dump (by calling some fucntion) with an appropriate error message for my problem?
Thanks in advance,
DariyooshHello again,
First of all I would like to thank everybody for their attention to my problem and
for spending time for answering my question. Thank you all very much.
Currently, Thomas' solution about MESSAGE_TYPE_X seems to work pretty well
for my problem. As all of you mentioned that, there should be softer methods to inform
users. One main problem is that the program which lanuches my programs during night
is not a sap user, it is a Unix scheduler (please forgive me I don't know these administration
details and how they work) so according to what the administrator told me it is not possible
to send email. As a result, I think I may go with MESSAGE_TYPE_X until I found another proper way.
Once again, thank you all for your help.
Kind Regards,
Dariyoosh -
Error while importing a dump file in Oracle 10g R1
Hi all,
While trying to import a schema using Data Dump, I am facing the following issue -
UDI-00018 - Import utility version can not be more recent than the Data Dump server.
Following is the version information of the source and target DB and the utilities :
Source DB server : 10.1.0.2.0
Export utility : 10.1.0.2.0
Import utility : 10.1.0.2.0
Target DB server : 10.1.0.2.0
Export utility : 10.2.0.1.0
Import utility : 10.2.0.1.0
I can figure out the cause for the problem, but don't know how to resolve it.
Any help will be appreciated.
Thanks in advance.
Gitika KhuranaHow did you get thre DMP file created and how are you trying to import the dump file? Could you post the commands you're using, please?
-
Error_Exception dump while opening the report in RRMX
Hi All,
When User trying to open the report Error_Exception dump is coming for few Info Providers. Please find attached dump for your reference.Issue is res loved, We have analyze the short dump ,when loads were running and at that if time user executed the queries then that dump was occuring.
Maybe you are looking for
-
Cant Get Text To Show In JTextArea
Hi guys, I'm trying to create a very simplistic GUI where the output of an IRC server is shown in a JTextArea. However for the life of me I can not get any text at all to show in the text area. Here's the class that creates the user interface: import
-
While creating Goods Receipt for multiple serial numbers it is generating an internal error
Error:Internal error (-5002) occurred [ 131-183] we are using version SAP B1 9.0 PL 4 The code which we are using. Dim oPDN As SAPbobsCOM.Documents oPDN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
-
Just bought a Mac Mini today, displayed through my 42in Plasma TV. I wanted to find out if anyone knew about a 'freespace' or optical air mouse, like the Logitech MX Air Mouse, that could work with my Mac Mini. Or would the MX Air work with it? I'm j
-
Flexrio FPGA dma and dram simulation
I have a pair of Flex RIO 7966r boards where I am trying to perform DRAM to DMA transfers. Each FPGA uses both banks of DRAM. One bank for capturing Camera Link frames, the other bank for capturing sub-frames from within each frame (And performing
-
Ipod shuffle does not connect to itunes anymore
Hi I am having trouble getting my Ipod Shuffle 4th Generation to show as a device in Itunes. I think this has been the case since I undertook recent upgrades. I have followed the trouble shooting assistant and have had no luck. Suggestions appreciate