RFC_NO_AUTHORITY error for user SAPSYS in client 000

Hi
I have a lot of abap dumps in ST22 RFC_NO_AUTHORITY error for user SAPSYS in client 000 for today which I'm not sure what they mean. I don't have a SAPSYS user in client 000.
The reason that I'm concerend is we had an incident with the SAP server last night where it became unresponsive about 2.30 am and had to be manually rebooted this morning. The R3 jobs all ran OK but the BW loads failed and had to be re-run this morning. There were no unusual jobs or programs running last night and the Server Event Log does not contain any further information as to the probable cause of the problem.
I'm not sure if this error is related to the BW jobs running and was wondering did anyone come accross it and what it means.
Thanks
Siobhan

Check notes 944615 and 93254.
Rich

Similar Messages

Failed to activate authorization check for user SAPSYS

Hi Experts
I am trying to run the sdcc, it was throwing time_out error. i have increased the work process runtime. now
i am getting a error Failed to activate authorization check for user SAPSYS.
Please help me to solve this issue.
Regards
Venkat

Hi, Mr. Joe Bo.
Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
Basis Patch - 15, Kernel 159
I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
Thanks & Regards
Venkatesan J

What is transaction no buffer for user SAPSYS in transaction ST03?

Looking into transaction ST03 I find an unusual high number of transaction <no buffer> for user SAPSYS concentrated on one dialog instance during a short time frame. Can some one explain what this means?
Thanks
Harrie

Hi Harrie,
Have a look at the following notes:
Note 104026 - Semaphore 16 blocked by SAPSYS/high resp.time
Note 63476 - Response times too high for CPIC/RFC in ST03
Regards,
Siddhesh

Trace deactivated for user SAPSYS

hi,
I see the following message in the sap system for one application server only for ENQ Process
I see the message in SM21
Trace deactivated for user SAPSYS
I could not find any other details of the sam
Please let me know of what can be the reason for the same

Check Security Audit setting in SM19 to see if by any chance theres a trace enabled for SAPSYS that is failing to "activate".... Long shot but worth trying.
Regards
Juan

Consistency error for user in PPOSA_BBP , no error in HRALXSYNC

Hi Experts,
For the same user when we run the report HRALXSYNC in SE38 , everything is green but when we check the same user in PPOSA_BBP it gives error "Attribute check for USER failed" .
I have two queries,
1)Why is the mismatch between the two checks i.e. in HRALXSYNC report and PPOSA_BBP
1)How can we see what is the exact error.
Regards,
Anubhav

Hello Anubhav,
What version of SRM?
Execute the transaction:bbp_bp_om_integrate for the user,
after the result comes,whith some data in red,right?
Now scroll towards right..
select the User's consistency row and there is an optiion at the end of tool bar,
with 2 arrows shoWing downwards(Start Repair),just select the user and click on it.
see what happenS
ArshaD
Edited by: arshad ahmed on Jul 23, 2009 3:52 PM
Edited by: arshad ahmed on Jul 23, 2009 3:54 PM
Edited by: arshad ahmed on Jul 23, 2009 3:55 PM

403 Error for user Websites

I have had the user websites suddenly start giving 403 errors on a 10.5.2 Leopard server. The main webpage is still working fine but all of the websites for users are not and they were as of last week. I have not messed around with the Apache conf files at all and the only thing which may have changed would be permissions but I have set them for staff - read only and others - read only and they still do not work.
I have found these pages and tried their suggestions to no avail:
http://www.macosxhints.com/article.php?story=20071027155902154
http://www.salmanmunir.com/2007/11/30/forbidden-403-error-in-leopard-mac-os-105- with-web-sharing-on/

403 error means that it is forbidden. This can occur for two reasons when accessing /~user/:
1) The user's directory (~user), their Sites directory (~user/Sites) or the index file (~user/Sites/index.html) has the wrong permisssions. Both of those directories must be readable and executable by the user www, and the index.html must be readable by www, which generally means everyone.
2) There is no index file for the user: (~user/Sites/index.html) That can be that either the index.html file is missing or the Sites directory is missing.

How to move pre-delivered configuration for MRS 610 from client 000 to 010

We have installed MRS 610 SP 5 in client 000. How do i move the pre-delivered sap configuration from client 000 to client 010.
Your responses will be highly appreciated
thanks
Anjum.

Hi
Not sure may be local client copy will work in your scenario Tcode SCCL
Regards
Uday

Login error for User in OBIEE 11g

Hi All
I have created an User(TEST_USER) in oracle 11g
but for some i have to delete the user and recreate in the same name(TEST_USER)
but when i am trying to login in analytics after recreating the user am getting the followwing error.
"An error occurred during authentication. Try again later or contact your system administrator."
Please help.
regards
Gourisankar
Edited by: 805966 on Dec 13, 2010 4:45 AM

Hi All
I have created an User(TEST_USER) in oracle 11g
but for some reason i have to delete the user and recreate in the same name(TEST_USER)
but when i am trying to login in analytics after recreating the user am getting the followwing error.
"An error occurred during authentication. Try again later or contact your system administrator."
Please help.
regards
Gourisankar

Admin Console -- Sign in error for user oc4jadmin

Getting the following error when trying to login using the oc4j application sever control console. I can successfully administer the oc4j server via command line with the used is oc4jadmin and password but cannot get in via online
The stored administration credentials are invalid; please log in as a user with the oc4j-administrators role.

Hello hmcom,
Looking at your URL, I've noticed that both
http://baltimorecarpets.com
and
http://www.baltimorecarpets.com
are registered to the InContext Editing service. InContext Editing
sees them as two separate sites and the users associated with them
are not shared between sites.
The problem that you have might be caused by the fact that
the publishers have been invited for one of these sites, but when
they try to login they are using the other URL (with or without the
'www' part). You should keep a single site registered (the one that
has the publishers invited), and delete the other one (using the
Remove website button from the InContext Editing Portal). Also, you
should instruct the publishers to
Please let us know if you have any questions/problems.
Thank you,
Florin

SAP Password Reset for user opted system / client

Hello, we have a requirement where the user will log on using LDAP and go to the portal and from the web page opt to reset the system and client where he/she wants to reset to his specified password using CUA. This is similar to as specified in
www.microsoft-sap.com/pdf/Password_Reset.pdf
Problem is : Is there a way to reset the corresponding (non production) systems password as done in SU01 through abap. creating a bdc recording of su01 and running does not seem to work. Nor does SUSR_USER_CHANGE_PASSWORD_RFC as the user does not know his current password. Any solution / way out by BAPI calls (maybe) along with their sequence info would be appreciated.

Surpreet,
I tried that. But this happens : The function executes successfully with status 0 and message as User xxxx has been changed but when that user tries to logon with that password then it fails meaning it really did not change . This happens for all destination systems other than current logon system.
Question: is there another process to synchronize the change or commit i have to run/ call. I thought SAP took care of it automatically.

BusObj XI R2 Deski login error for user - works on one PC but not another

Hi,
I have a user logging into Deski on her PC but getting:
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Enteprise authentication could not log you on. Please make sure your logon information is correct.(hr=#0x80042902)
If she logs in on my PC her ID/password works just fine.
We reinstalled Deski and cleared any server information but with no difference.
And here's the odd thing.... I can login OK on her PC... so the client looks installed OK.
Any ideas?
Thanks,
Dean

HI Dean,
The issue could be that the user account might have got corrupted.We can delete the user preferences from the registry.
When the user logins to dektopintelligence, it recreates the user information in registry.
Note:Take a backup of the registry of client's PC,before making any changes.
Click on File->Export
Save the registry information.
->Click on Start->Run->regedit
->Select HKEY_CURRENT_USER->Software->Business Objects->Suite 11.5->default->Application Preferences
->Delete Business Objects Reporter.
->Also delete the User Pref (the account with which you have logged into the system).
Now try to test the issue by logging to deski.
Hope the information helps!!
Regards,
Shubha.

ABAP program error for user EXIT

Hi, I wrote code in EXIT_SAPLRSAP_001
When check and active it there were no syntax errors but when go rsa3 and check it gives an error at the follwing line
it_mcekpo[] = c_t_data[].
Runtime error: The internal talbles are neither compitable nor convertable.
I have defined it_mcekpo as below:
DATA BEGIN OF IT_MCEKPO OCCURS 1.
        include structure mcekpo.
DATA END   OF IT_MCEKPO.
But when I double click on 'c_t_data[]' , I get a message "object not defined, do you want do define".
Can some one tell me how should I define this, what aption I should choose and what is the strcture.
I am trying to add afnam, banfn and bednr from ekpo table to MC02M_0ITM (2LIS_02_ITM).
And is there any naming convention for 'it_mcekpo' and 'c_t_data'?
Any help is appreciated.
(This is my first userexit)
data: begin of it_ekpo occurs 0,
      ebeln like ekpo-ebeln,
      ebelp like ekpo-ebelp,
      afnam like ekpo-afnam,
      banfn like ekpo-banfn,
      bednr like ekpo-bednr,
     bukrs like ekpo-bukrs,
end of it_ekpo.
when '2LIS_02_ITM'.
it_mcekpo[] = c_t_data[].
select ebeln ebelp afnam banfn bednr bukrs
from ekpo into table it_ekpo
    for all entries in it_mcekpo
    where ebeln = it_mcekpo-ebeln and
          ebelp = it_mcekpo-ebelp.
performance imprv.
if not it_ekpo is initial.
     sort it_ekpo by ebeln ebelp.
endif.
loop at it_mcekpo.
    read table it_ekpo with key ebeln = it_mcekpo-ebeln
                                ebelp = it_mcekpo-ebelp
                                binary search.
    if sy-subrc = 0.
      it_mcekpo-zzafnam = it_ekpo-afnam.
      it_mcekpo-zzbanfn = it_ekpo-banfn.
      it_mcekpo-zzbednr = it_ekpo-bednr.
     it_mcekpo-zzabukrs = it_ekpo-bukrs.
   endif.
   modify it_mcekpo.
endloop.

Hi,
TRY the below code :
TYPES BEGIN OF TYPE_02ITM.
     INCLUDE STRUCTURE MC02M_0ITM.
TYPES END OF TYPE_02ITM.
TYPES: BEGIN OF TYPE__ekpo,
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
afnam like ekpo-afnam,
banfn like ekpo-banfn,
bednr like ekpo-bednr,
bukrs like ekpo-bukrs,
end of type_ekpo.
CASE I_DATASOURCE.
when '2LIS_02_ITM'.
WHEN '2LIS_02_ITM'.
DATA:
ITAB_EKPO TYPE STANDARD TABLE OF TYPE_EKPO
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
DATA:
ITAB_02ITM TYPE STANDARD TABLE OF TYPE_02ITM
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
ITAB_02ITM[] = C_T_DATA[] .
select ebeln ebelp afnam banfn bednr bukrs
from ekpo into table itab_ekpo
for all entries in ITAB_02ITM
where ebeln = ITAB_02ITM-ebeln and
ebelp = ITAB_02ITM-ebelp.
performance imprv.
if not itab_ekpo is initial.
sort itab_ekpo by ebeln ebelp.
endif.
loop at ITAB_02ITM.
read table itab_ekpo with key ebeln = ITAB_02ITM-ebeln
ebelp = ITAB_02ITM-ebelp
binary search.
if sy-subrc = 0.
ITAB_02ITM-zzafnam = itab_ekpo-afnam.
ITAB_02ITM-zzbanfn = itab_ekpo-banfn.
ITAB_02ITM-zzbednr = itab_ekpo-bednr.
ITAB_02ITM-zzabukrs = itab_ekpo-bukrs.
endif.
modify ITAB_02ITM.
endloop.
c_t_data[] = ITAB_02ITM[].
With rgds,
Anil Kumar Sharma .P

Free/busy information error for users whose primary SMTP is internal domain

We have a scenario where we have some users on our network who use s web-based mail service but have AD logins as they need access to internal resources (file and print).
We have been asked to set up access for these users to the meeting rooms. An initial idea was to create a mailbox for each of these people and set up them up with an email address in the internal domain (company.local.co.xx). This has allowed them to use
the meeting rooms but they cannot retrieve the free/busy information. When looking at available times, get the standard message "Suggestions cannot be provided because free/busy data could not be retrieved"
It's not really clear why this isn't working. Suggestions?

Thanks for the response. Those were my initial thoughts too.
However, doing a test of the email configuration shows that it successfully finds the OOF, OAB, etc.
Hi,
Since the OOF and OAB Urls can be retrieved properly from Autodiscover service, please directly access the OOF url from IE and see whether a proper XML file is returned.
Regards,
Winnie Liang
TechNet Community Support

ERROR for User fields

ERROR: No Records Found
This is the error which i am getting when entering user fields (location) while creating WBS.
Where do I enter the values.

Hi ,
Are you entering values in the 5th tab (User Fields) ?
Check if you are entering values in the "geenral fields"
and let us know what is the field key value you are entering !!!
Best Regards,
M.Amarendra

WebI Report using BW Query (Getting Error for User Response Function)

Hello Experts,
I have created WebI Report on top of BW query. All the prompts are coming from BW query. I was trying to create user response function but it's not working. Do I need to use special function or I can't use.
Any help would be highly appreciated.
Thanks
Nisniki

hi Nisniki,
take a look here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a45246-ce76-2b10-e688-f5c8206203eb
Ingo

RFC_NO_AUTHORITY error for user SAPSYS in client 000

Similar Messages

Maybe you are looking for