RFC not found error

Hi people,
I have developed a Z RFC in R/3 system and the same is activated and used there. But when I try to use the same RFC in BW system through 'Pattern' function, it gives me as error that the Function Module not found.
Do I need to create the same RFC in both systems?. If not, what could be the solution. Also, if possible please provide me example of RFC Destination code to be used while calling RFC.
Thanks in Advance.
Nitin

Hi,
please check out the link below it might help you
its not required to use RFCs on both side but you can also use BAPI instead of RFCs
http://help.sap.com/saphelp_nw04/helpdata/en/22/042537488911d189490000e829fbbd/content.htm
***************please reward points if the information is helpful to you***************

Similar Messages

404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI

Hi,
I am installing XI 3.0 SR1 on Win2000 sp4. I got struck at page 40 of installation guide trying to configure rfc destination INTEGRATION_DIRECTORY_HMI. I gave all the parameters as specified in the guide and clicked on "Test". I am getting the 404 Not Found error. The detalied error log is attached below. Can some one please let me know what could be the reason for the error?
Thanks
Sireesha
HEADER NAME HEADER VALUE
~response_line HTTP/1.1 404 Not Found
~server_protocol HTTP/1.1
~status_code 404
~status_reason Not Found
connection close
pragma no-cache
cache-control no-cache
expires 0
content-type text/html
content-length 1539
server SAP J2EE Engine/6.40
date Fri, 03 Feb 2006 04:00:56 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html>
<head> <title>Error Report</title> <style> td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style
> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"> 404 &nbsp Not Found</td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img
width=1 height=1 border=0 alt=""></td> <td align="right" height="2
3">SA
P J2EE Engine/6.40 </td> </tr> <tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td> </tr> </table> The requested
resource does not exist. <table><tr><td valign="top">&nbsp
;Details:</td><td valign="top"><PRE>Go to <A HREF="/" target="_paren
t">main page</A> of this application!</PRE></td></tr></table></fo
nt> </body> </html>
Time (ms) 134

Hi Sireesha -
>>>As per your suggestion. I am trying to reinstall the XI Component again. But the setup is not asking me for any uninstallation of the existing setup nor any message saying that you already have the XI Component installed. Does it mean that the XI Component got deleted automatically?
It's hard for me to say not being able to see your system, but here are some things you can check:
- check link http://<xi_host>:<j2ee_port>/sap/monitoring/ComponentInfo
You should be able to see components like SAP_XITOOL, SAP_XIAF, SAP_XIAFC which would indicate that XI components are installed. You need role SAP_J2EE_ADMIN to access this.
- Using SDM, you can see what's currently deployed in the SDM repository for XI related components.
- Using Visual Admin, you can look for XI related services within the Server instance.
But in any case, try reinstalling the XI Java components (which is really what you're installing following the SR1 Installation Guide). If you run into problems during the installation and it's possibly due to already existing XI components, I would recommend, cleaning the slate and uninstalling the J2EE Add-in and starting again from the J2EE add-in part. Instructions for deleting the add-in are in the corresponding WebAS Java 6.40 <platform/db> install guide (in the last section - "Additional Information").
Regarding the central adapter engine, yes, this is installed automatically when you do the main installation of the XI Java components. Instructions in the SR1 guide specifically referring to the Adapter Engine are for a decentral adapter engine.
Hope that helps.
Best regards,
Jin

Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error

Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
    EXPORTING
      im_material = item_matnr
      im_vornr    = item_vornr
      im_sheet    = item_sheet
IMPORTING
      value = ZMESSAGE .

Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen

Integration Directory : getting 404 Page not found error while accessing In

Hello,
When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
Some Description
- Executing sxmb_ifr,
- From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
erpsys07 -> Central SLD -> J2ee Port - 50100
erpsys07 -> PI system -> J2ee Port - 50300
When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
Could some help me where to change and what to change?
Thanks,
V.SINGH

Have you checked port in Netweaver Administration?
See which port is mentioned there. (If you are using PI 7.1)
Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
Thanks,
Hetal
Edited by: hetal shah on Nov 24, 2009 4:49 PM

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

Private Key Not Found Error in Ldaps

Hi,
I am facing "Private Key Not Found" Error in ldaps. The key and the SSL certificate is stored under the same location. The certificate is self signed certificate and in .pem format. When I am trying to install the certifcate through SUN ONE Console it throws the following error
"Either this certificate is for another server, or this certificate was not requested using this server".
can any one help me in this regard.
Regards
Senthil
Edited by: senlog80 on Dec 30, 2008 3:18 AM

Or even better, check the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=924320&_NLANG=E">924320</a>.
Symptom:
When you execute a query with virtual characteristics or key figures, the system issues the following error message:
Object FIELD I_S_DATA-<key figure> not found
Other terms
RSR00002, RSR_OLAP_BADI
Reason and Prerequisites
This problem is caused by a program error.
Solution
If the virtual characteristics or key figures are implemented using the enhancement RSR00002 (CMOD), implement the corrections.
If the virtual characteristics or key figures were created directly as implementations of the RSR_OLAP_BADI BAdI, compare the source code of the INITIALIZE method with the corresponding source code example. During the call of GET_FIELD_POSITIION_D, <L_S_SK>-VALUE_RETURNNM must be transferred instead of <L_S_SFK>-KYFNM.
Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280"SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Assign pts if helpful.

I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?

I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
Gerry

Hello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found, Error= –43

Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error (404) from web browser

I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.

Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

File not found error (no error number or file identified)

Hi,
I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
Regards
Richard

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

RFC not found error

Similar Messages

Maybe you are looking for