RFC not Reading the data's all time.......

Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.

Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar

Similar Messages

RFC -Not reading the data all time

Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.

Hi,
For this issue,I would like to know if we can access or see the file in the DVD.
Did you receive the error message？
I suggest you check the Device Manager to see if the device is marked with a yellow exclamation point.
Meanwhile,please use the CD/DVD troubleshooter tool ,which can automatically find and fix some problems with CD/DVD.
http://go.microsoft.com/?linkid=9840807
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

PCI6534 not reading the data correctly

Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).

Hello, I have a 2009 iMac, and my harddrive has failed several times now, and now I need to re-install snow leopard but my install DVD is damaged and I have bought a new snow leopard disc. However my iMac will not read the disc at all ?

Hello, I have a 2009 iMac, and my harddrive has failed several times now.
I tired to reinstall snow leopard with the install DVD that came with my iMac. However the disc is damaged so I bought a new Snow Leopard but my iMac wont read the new disc, it just stays in the apple logo screen, I have tired safe boot, holding down the "C" key on startup and tried using disc utility but getting nowhere.
Please help. Thanks.

Might be related, if your hard drive is a 1TB drive,it could be a Seagate drive.
The drives are known to fail and your iMac maybe covered for free replacement under the Apple's Seagate hard drive replacement program until April 12 of this year.
I Believe the 2009 models are covered under this replacement warranty.
You can find out if you are eligible here.
http://www.apple.com/support/imac-harddrive/
Good Luck!

Profit Center is not reading the data...

hi all,
When I assigned each Cost center with a profit center and posted costs through in FB50 to cost centers and was trying to check the data in KE5Z, system displaying the message that 'No data Read'.....
Why it is soo..
Thank you..
Suresh

Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar

File Adapter fixed length Native format Builder schema not reading the data as expected

Hi
We are using a File Adapter for reading a fixed length data. Using the schema we are able to read the file but the places are incorrect. Following is the schema that we used and the payload.
At the last you can find our expected read of data how it should be.
With out the record type code we are not even reading the file. Hope there should be a correction in the schema. Please suggest
Schema that we are using:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
     xmlns:tns="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
     targetNamespace="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
     elementFormDefault="qualified" attributeFormDefault="unqualified" nxsd:version="NXSD" nxsd:stream="chars"
     nxsd:encoding="US-ASCII">
    <xsd:element name="GENVNDRReturnedItem">
        <xsd:complexType>
            <xsd:sequence minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="1">
                <xsd:element name="HeaderRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="1">
                    <xsd:complexType>
                        <xsd:sequence>
                            <xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="PriorityCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="2" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateDstn" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateOrgin" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="FileCrDt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="FileCrTm" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="4" nxsd:padStyle="tail"/>
                            <xsd:element name="FileIdMdfr" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="RecSize" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"
                                 nxsd:padStyle="tail"/>
                            <xsd:element name="BlockingFctr" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="2" nxsd:padStyle="tail"/>
                            <xsd:element name="FormatCd" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateDstnNm" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="23" nxsd:padStyle="tail"/>
                            <xsd:element name="ImmediateOrginNm" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="23" nxsd:padStyle="tail"/>
                            <xsd:element name="RefCd" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"
                                 nxsd:padStyle="tail"/>
                        </xsd:sequence>
                    </xsd:complexType>
                </xsd:element>
                <xsd:element name="BatchHdrRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="5">
                    <xsd:complexType>
                        <xsd:sequence>
                            <xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="ServClsCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="3" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyName" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="16" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyDiscretionaryData" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="20" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyIdfn" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="StdClsCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="3" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyEntryDesc" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="CmpnyDescDate" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="EffEntryDate" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="SettlementDate" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="3" nxsd:padStyle="tail"/>
                            <xsd:element name="OrgntrStatusCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="OrgntrBatchCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="15" nxsd:padStyle="tail"/>
                        </xsd:sequence>
                    </xsd:complexType>
                </xsd:element>
                <xsd:element name="FileControlRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}"
                     nxsd:startsWith="9">
                    <xsd:complexType>
                        <xsd:sequence>
                            <xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="1" nxsd:padStyle="tail"/>
                            <xsd:element name="BatchCnt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="BlockCnt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="6" nxsd:padStyle="tail"/>
                            <xsd:element name="EntryAddendaCnt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="8" nxsd:padStyle="tail"/>
                            <xsd:element name="EntryHash" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="10" nxsd:padStyle="tail"/>
                            <xsd:element name="TtlDbtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="12" nxsd:padStyle="tail"/>
                            <xsd:element name="TtlCrdtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="12" nxsd:padStyle="tail"/>
                            <xsd:element name="Reserved" type="xsd:string" nxsd:style="fixedLength"
                                 nxsd:length="39" nxsd:padStyle="tail"/>
                        </xsd:sequence>
                    </xsd:complexType>
                </xsd:element>
            </xsd:sequence>
        </xsd:complexType>
    </xsd:element>
</xsd:schema>
Sample data:
1011390714890 0910000191406110449A094101MCSCLDA_TESTIN
XPLLS KNRGO CNNK
5200MCSCLDA_TESTIN e-Bill
2390714890TELe-Bill
1406100001091000017000001
6262759774891010000074743
0000033793102651-013 U HOLBACH KARLA & JAMES   1091000013925011
799R01091000013925011
27597748
091000010000001
820000000200275977480000000337930000000000002390714890
091000010000001
9000060000025000001200995048661000001265867000000000000
Read File receive Activity:
<GENVNDRReturnedItem>
<HeaderRec>
    <RecordTypeCode>0</RecordTypeCode>
    <PriorityCode>11</PriorityCode>
    <ImmediateDstn>390714890</ImmediateDstn>
    <ImmediateOrgin>0910000191</ImmediateOrgin>
    <FileCrDt>406110</FileCrDt>
    <FileCrTm>449A</FileCrTm>
    <FileIdMdfr>0</FileIdMdfr>
    <RecSize>941</RecSize>
    <BlockingFctr>01</BlockingFctr>
    <FormatCd>M</FormatCd>
    <ImmediateDstnNm>CSCLDA_TESTIN X</ImmediateDstnNm>
    <ImmediateOrginNm>PLLS KNRGO CNNK</ImmediateOrginNm>
    <RefCd></RefCd>
</HeaderRec>
<BatchHdrRec>
    <RecordTypeCode>2</RecordTypeCode>
    <ServClsCode>00M</ServClsCode>
    <CmpnyName>CSCLDA_TESTIN e</CmpnyName>
    <CmpnyDiscretionaryData>-Bill 2</CmpnyDiscretionaryData>
    <CmpnyIdfn>390714890T</CmpnyIdfn>
    <StdClsCode>ELe</StdClsCode>
    <CmpnyEntryDesc>-Bill</CmpnyEntryDesc>
    <CmpnyDescDate>1</CmpnyDescDate>
    <EffEntryDate>406100</EffEntryDate>
    <SettlementDate>001</SettlementDate>
    <OrgntrStatusCode>0</OrgntrStatusCode>
    <OrgntrBatchCode>91000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
    <RecordTypeCode>0</RecordTypeCode>
    <BatchCnt>000600</BatchCnt>
    <BlockCnt>000250</BlockCnt>
    <EntryAddendaCnt>00001200</EntryAddendaCnt>
    <EntryHash>9950486610</EntryHash>
    <TtlDbtEntryDlrAmt>000012658670</TtlDbtEntryDlrAmt>
    <TtlCrdtEntryDlrAmt>00000000000</TtlCrdtEntryDlrAmt>
    <Reserved></Reserved>
</FileControlRec>
</GENVNDRReturnedItem>
Expected Read data how we are looking:
<GENVNDRReturnedItem>
<HeaderRec>
    <RecordTypeCode>0</RecordTypeCode>
    <PriorityCode>11</PriorityCode>
    <ImmediateDstn>39071489</ImmediateDstn>
    <ImmediateOrgin>0091000019</ImmediateOrgin>
    <FileCrDt>140611</FileCrDt>
    <FileCrTm>0449</FileCrTm>
    <FileIdMdfr>A</FileIdMdfr>
    <RecSize>094</RecSize>
    <BlockingFctr>10</BlockingFctr>
    <FormatCd>1</FormatCd>
    <ImmediateDstnNm>MCSCLDA_TESTIN</ImmediateDstnNm>
    <ImmediateOrginNm>XPLLS KNRGO CNNK</ImmediateOrginNm>
    <RefCd/>
</HeaderRec>
<BatchHdrRec>
    <RecordTypeCode>2</RecordTypeCode>
    <ServClsCode>200</ServClsCode>
    <CmpnyName>MCSCLDA_TESTIN</CmpnyName>
    <CmpnyDiscretionaryData>e-Bill</CmpnyDiscretionaryData>
    <CmpnyIdfn>2390714890</CmpnyIdfn>
    <StdClsCode>TEL</StdClsCode>
    <CmpnyEntryDesc>e-Bill</CmpnyEntryDesc>
    <CmpnyDescDate/>
    <EffEntryDate>140610</EffEntryDate>
    <SettlementDate>000</SettlementDate>
    <OrgntrStatusCode>1</OrgntrStatusCode>
    <OrgntrBatchCode>091000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
    <RecordTypeCode>0</RecordTypeCode>
    <BatchCnt>000060</BatchCnt>
    <BlockCnt>000025</BlockCnt>
    <EntryAddendaCnt>00000120</EntryAddendaCnt>
    <EntryHash>0995048661</EntryHash>
    <TtlDbtEntryDlrAmt>000001265867</TtlDbtEntryDlrAmt>
    <TtlCrdtEntryDlrAmt>000000000000</TtlCrdtEntryDlrAmt>
    <Reserved/>
</FileControlRec>
</GENVNDRReturnedItem>

at step 8 of 9 of the file adapter wizard, the icon appears as a cog, on the right, with caption "define schema for native format".
I have JDev 11..1.1.3.0
The problem might be with the version of the SOA extensions you have installed....

MacBook not reading the data on my harddrive now?

So I have a Lacie 80 gig harddrive that I have been able to read before but for some reason it won't now. It shows that there is data on there but it won't show the folders. It does read my WD Passport and it's contents. I have all of my 60 gigs of music on the Lacie and was about to convert all the WMA's and put them on the WD but now I might be out of luck. Does anybody have any ideas?

hi
format it with a pc in msdos mod
regards

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

I want to give my old iPhone 4 to my grandson to use like an iPod Touch. Wifi only. How do I deactivate my info..so he can buy his own apps. and not have the cloud pushing all of my data to the old phone?

I want to give my old iPhone 4 to my grandson to use like an iPod Touch. Wifi only. How do I deactivate my info..so he can buy his own apps. and not have the cloud pushing all of my data to my old phone?
Just turning off Cloud will not prevent him from turning it back on.
Rignt now, if he uses the App store, iTunes thinks it's talking to me.

First, turn off iMessage, FaceTime & delete the iCloud account, while your sim is still in the phone. Then: Settings>General>Reset>Erase All Content & Settings. Give it to your grandson & he gat then set it up as he wants.
Important your turn iMessage & FaceTime off to disassociate the phone from your Apple ID. Apple "claims" to have fixed this with iOS 6.0, but until I can absolutely confirm such, I still recommend you turn all of that stuff off first.

Acrobat does not opens a PDF in the Browser at all times

Required:
I need to ensure Acrobat opens a PDF in the Browser at all times, and not have Reader hijack the task. All fixes for this I have found won’t work as they render Reader inoperable. i.e. uninstalling Reader or denying users to the Reader executable AcroRd32.exe
Situation:
I have a problem with Adobe Reader and Acrobat Standard 8.2.5. This is on a Terminal Server 2003 with 10 users. They require both Acrobat and Reader be accessible due to specific 3rd party applications related to banking software.
Problem:
They must open PDFs in a browser with Acrobat so they may fill the forms and save them. Acrobat doesn’t consistently open the file; Reader hijacks the file when clicked to open and their ability to fill the forms is hindered.
- Open PDF in browser is checked in Acrobat
- Open PDF in browser is NOT checked in Reader
Sometimes when the Acrobat desktop icon is clicked, Reader opens instead. Having Acrobat open in the background does help but is not consistent.
Also uninstalling Reader from the Server is unacceptable due to a 3rd party banking application for loans. This application is hard coded to open AcroRd32.exe within the application for opening PDFs.
Any suggestions would be greatly appreciated.
Ken

Try this, when I right clicked on the document to rotate the image a noticed a tool bar appeared at the bottom of the page with the save icon. It then disappeared, but by hovering at near the bottom of the document the tool bar appears and I can save the PDF.

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

How to read the date and time information of a file by labview

how to read the date and time information of a file by labview? for example, created time and modified time.
Solved!
Go to Solution.

if you need to know the last modification date of file:-
"Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
Thanks as kudos only

How to read the date in Time management schema or in Payroll schema

Dear all,
My issue is before 16th in current month, the overtime/absence's wage type should be one and after 16th should be another.For example, before 16th,the overtime wage type is 5001 and the absence deduction wage type is 5002,and after the 16th, the overtime wage type should be 5004 and the absence deduction should be 5005.So I need to read the date in schema then I can choose which wage type should I use.
So what can I do?
Hope your advice.Thank you.

If the the employee was absent upto 16the one wage type has to be generated and after 16th another wage type should get generated right and after 16the another wage tyoe has to generate
For this
Have two Absence Valuation rule TSAU1 TSAU2 from V_T554C
and built the logic the opertaion CMPER will help you in compare the periods or else you can use NUM= FY01 like that
or else you can write a rule based on the wage type by haveing the Customer Specific Processing Class

RFC not Reading the data's all time.......

Similar Messages

Maybe you are looking for