RFC not shown in source systems

Hi All;
I create an RFC from BW  to ERP 2004
now this rfc is being shown in transaction SM59 but when i run
transaction rsa1 and go to source systems there is no source system for the RFC that i created
Please help
Thanks and regards
Tushar

Tushar, it is not enough to just create an RFC connection in SM59.  You also need to create a Source System connection in RSA1 that uses the RFC connection from SM59.  Goto RSA1 and click on Source Systems.  Right-click on Source Systems and <b>Create</b>.  A window will appear prompting for the Source System type, use SAP System from Release 3.0E.  It will then prompt you for Available Destination where you put in your RFC connection (it is a drop-down list).  Type in your user-id and passwords to connect the two systems together and you are all set.
Your Source System will be set up.  You can right-click on your Source System and select <b>Check</b> to verify the connections and the passwords.
Hope this helps.

Similar Messages

  • DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

    Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5,  activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
    Can anybody help me who has faced similar issue.
    Regards,
    Neil

    Hi Niel,
           Could you chek the RFC Connection of particular client.
    Thanks,
    Ram

  • Transport Error - DS does not exist in Source system

    Dear All,
    I am getting below Error while transporting the DSO from DEV to Quality.
    DataSource  8ZM_ALT  does not exist in source system  DCQCLI041 of version A.
    I have checked the dataosource is active and available in Development system.  But Its giving error while importing.
    As per the dataflow the data of this DSO is updated to Cube.
    Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
    Regards
    Sankar

    Hi,
    Your right I am transporting ZM_ALT Dso .  The following log of the error we are getting.
    DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
    Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
    DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
    Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Regards
    Sankar

  • Info Source 80FIGL_O06 is not defined in source system

    Hi BW Experts,
    When I am trying load data from ODS to Cube, I am getting a error messgae stating:
    Info Source 80FIGL_O06 is not defined in source system
    Error in Source system
    This is an urgent issue. Please let me know if you have any suggestions...
    Regards,
    Reddy.

    You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
    The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
    Did you follow the above steps? Where exactly is your problem?

  • Infosource is not defined in source system.

    Hello Expert,
    We have problem on data upload. The Infosource is ODS object generated. Now through RSMO, message is:
    Infosource 8* is not defined in source system.
    How to re-define/active this type infosource? Is there any impacts?
    BTW, days ago, it ran very well.
    Thanks
    XY
    Edited by: xy chen on Nov 14, 2008 11:47 AM

    Hi,
    I am also facing the similar error, whne uploading data from an ODS to further data targets.
    I did follow th instructions advised, and I tried searching in the Service Market Place with the term,
    " " Infosource is not defined in source system " " but couldnot find any correction notes.
    Could you let me know the notes, you followed up to resolve this issue,
    Thanks in advance,
    Cheers,
    Neela

  • DataSource 80SD_O03 does not exist in source system of version A

    Hi,
              While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
    Regards,
    Devi.

    Hi,
    Hope you followed the same in R/3
    Datasource:        Rsa5->RSA6
    BI Side:
    Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
    And same procedure for Infoprovider too.
    Please analyze closely about the procedure, some where you are missing something.
    Regards,
    Suman

  • DataSource ***** does not exist in source system ***** of version A

    dear masters,
    i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
    and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
    excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
    pls help me how to overcome this problem.... where i m missing which setttings...
    regards,
    vicky

    Hi Vicky,
    Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
    Now Change and activate the data source again.
    Both the status and version should be activated green.
    Also you can use the check button to check the DS.
    Thanks,
    Naween

  • Data source 80BP_ID does not exists in source system

    Hi All,
    I have just started with standard content for SD module.
    I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
    After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
    While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got  errors  namely
    Data source 80BP_ID does not exists in source system
    Datasource 80BP_REL not maintained.
    Can somebody pls suggest a way out.
    Thanks in advance..
    Regards,
    Rohit

    Hi Rohit,
    When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
    Please uncheck the unrelated objects while installing the STD content.
    you can select the option in the grouping as ONLY NECESSARY OBJECTS.
    Regards,
    Ravi Kanth

  • RFC not created in receiver system

    Hi,
    FIile-rfc received in receiver system until yesterday.now the RFC not reaching to receiver system.They are no changes and no change in RFC structure.
    all the ques are clear and RFC connectin to the receiver system is alo fine and CC monitoring is also green and in the audit log everything is sucessful.sxmb?moni messages are sucessful.
    please let me know where i can check ...
    Regards,
    hyma

    Did you see any logs in receiver RFC channel?
    Check the receiver service for interface in moni- SOAP header-Main document.
    Also check if any conditions are specified in receiver determination.

  • Field not delivered by source system - Deleted from rule

    Dear Support,
    While activating business content for example 0CRM_COMP,
    I get the following error:
    Field TYPE not delivered by source system -> Deleted from rule
    Field CAMP_TYPE not delivered by source system -> Deleted from rule
    Field CAMP_TYPETX not delivered by source system -> Deleted from rule
    Similar errors for different fields appear.
    My system config is
    BI 7.0, SP14
    BI Cont 703 Sp6
    Any fix or solution will be suitable awarded.
    Thanks and Regards
    Raj Jain

    HI Raj,
    The business Content is not always consistent.
    If you get messages like that, the best way to deal with them is to manually adjust the objects.
    In this case it means that you will have to check the datasource. It may be that in R/3 you will have to "unhide" or add some fields to the datasource. (I cannot be sure as I cannot go into details).
    Hope this helps,
    Udo

  • Why IDocs are not arrived from Source System

    Hi all,
    Now a days we are facing regular problem to load master data?
    We are getting Error Message - "No Idocs arrived from the Source system".
    I need to know, Why this error will be occurred?
    Is there any reason for this Docs are not arrived from the Source System?
    Please help me to analyze this error, why its happened regularly?  what could be possible reasons for this error?
    Its very urgent, please help me as early as possible.
    Thanks in Advance. I will asign the points for relevent answers.
    Regards,
    Sudharsan Reddy.

    Hi ,
    SOME OF THE CHECKS:
    1.You can check the RFC destination using the transaction SM59 in the system.   Then do Test connection and this should not cross more than 1000ms. The connection should establish within 1000ms.
    If it crosses more than 1000ms the tRFC entries will not be cleared fast.There will not be any job to push Transaction recorded entries it will go through SMD(Shared Master Data) Tool.
    So if it crossed more than 1000ms, then you can ask your Basis team to check the network connectivity b/w R/3 and BW system.
    If there is no serialization for these IDocs then you can use button F6 to process these entries in tRFC manually.
    2.Go to SM58 and check the LUW .If any error ..then selecting the failed Idoc, click edit in the  menu and execute LUW.
    3.If there are many Idocs with status red then check the system performance also. If performance os the system  is bad then, we can put the mail to basis guys they will check and restart the BW system. (or) it may be due to problem in the coding,since data transfer is taking long time.
    4. Some times it may be due to much parallel process at the info package level and make the Max parallel process into one process in RSCUSTV6, save and run the infopackage. This may be due to space problem.
    ( Or )sbiw>general settings>maintain control parameters for data transfer. Both in BW and R/3 we configure in the same way.
    There we need to give
    1.source Sys name
    2.Maximum KB in one data package.
    3.Maximum lines in one data package.
    4. Frequency (specifies after how many no. of data records, status record should be sent)
    5. Max processes ---Reduce the number process, save and try.
    6.Target Sys name.
    Regards,
    Dhanya.

  • Job is not running in Source system.

    Hi Experts,
    One issue I have because of this I am not able to load data into Data sources.
    I am in BI 7.0 environment.
    when I execute infopackage, total and techinical status are in yellow.
    I found in R/3 Job is not running, based on this statement in SM37. from the fallowing.
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
    Result of customer enhancement: 0 records
    IDOC: Info IDoc 2, IDoc No. 3136, Duration 00:00:00
    IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
    Synchronized transmission of info IDoc 3 (0 parallel tasks)
    IDOC: Info IDoc 3, IDoc No. 3137, Duration 00:00:00
    IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
    Job finished
    Job satrt time and end time are same, so job is not running in the sourcesystem, am i right. let me known if i am worng.
    It is Standard Data source but in the above statement becasue  *result of Customer enhancement:0 records.*
    please help me to reslove this issue to load data into BI.
    1. what I have to do to run job in source system side.
    2. should I take any help from Basis.
    Regards
    Vijay
    Edited by: vijay anand on May 14, 2009 3:02 PM
    Edited by: vijay anand on May 14, 2009 3:04 PM

    Hi Rupesh,
    in RSA3 data is availbale,
    but it is not coming to BI,
    Messages from source system
    see also Processing Steps Request
    These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
    From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
    the abovemessage I am getting in details tab.
    Regards
    Vijay

  • BDLS is not converting DataSource source systems

    After running BDLS on our BW system to convert from logical system DV1220 to ED2CLNT220 we found that the source system assignments for our datasources are not getting converted.  Specifically table RSISOSMAP which holds the mapping between the infosource and the OLTP system. We did check several of our ODS's and Info-cubes and the logical system were changed from DV1220 to ED2CLNT220.
    Any help would be appreciated.
    Regards,
    Mike...

    Mike,
    After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
    Refer to the below doc for detail. Also refer to note 886102.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
    Below note talks about similar issue.
    How to change all infosources to the new source system automatically
    Hope this helps.

  • Ctbw data source not found in source system

    hi,
    by reading and posting couple of threads i was finally able to create a data source in ctbw
    0MATERIAL_ATTR  800  001 MARA  ATTR  1CL_OMAT002
    so i went to rsa3 and tried to test this data source 1CL_OMAT002
    i am getting error in this way
    <b>DataSource 1CL_OMAT002 is not defined in the source system</b>
    can anyone suggest me how to proceed further
    and also if the above problem is resolved what should i do in bw side
    should i replicate 0MATERIAL_ATTR or 1CL_OMAT002 or both?

    Hi,
    Have you generated the data source after creation.
    in CTBW you will have to click on "generate data source" after you have created and saved the data source.It will activate all the classes used in that data sources.
    Once done go to RSO2 and give your data source name there and see if this data source appears there with it's field or not...if not then your data source is not getting generated properly.
    Try this and once successful then go to RSA3 and try to extarct data.
    Thanks

  • I am trying to set up icoud on my macbook pro. But, Icloud is not shown on my System Preferences?

    Hi,
    icloud does not show in my System Preferences on my macbook. I am rying to set it up. Where else should I be looking?

    What OS are you running? You need to have 10.7 Lion for the basic iCloud or 10.8 Mountain Lion for the full iCloud. While 10.7.5 will allow you to access iCloud you will be limited unless you can upgrade to 10.8 Mountain Lion.
    This is from Apple Support:
    Minimum operating system requirements
    You may also use iCloud with the following operating system versions:
    Mac
    OS X Lion v10.7.5 or later*
    * Note: Although you can use OS X Lion as noted above, you will not
    be able to take advantage of some iCloud features, such as Shared Photo Streams, iCloud Tabs, Find My iPhone Lost Mode, Documents in the Cloud for iWork, and Find My Friends location-based alerts.

Maybe you are looking for