RFC Ping failed while making test in RFCPTEST

Hello
I successfully installed SAP NetWeaver 7.01 ABAP Trial Version under Windows XP SP3.
Problem is that when I'm trying to configure STMS, I'm getting error "Could not start transport control program tp".
Help for this error says:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I perform tests with program RSTPTEST all are fine except RFC Ping.
Please help.
S.

I have the same error as what the thread starter have encountered.
Transport control program tp could not be started
Message no. TP608 Diagnosis
This is the error on the gateway trace file:
Thu Mar 19 11:09:46 2009
ERROR => R3ISearchPartner: timeout, partner LU: > <hostname> <, TP: >/usr/sap/<SID>/SYS/exe/run/tp< [gwr3cpic.c 6016]
ERROR => R3ISearchPartner: HOST: <hostname>, conv ID: 39145879 gwr3cpic.c 6029
Any idea how to solve this?
Edited by: Melvin Caceres on Mar 19, 2009 4:01 AM
Edited by: Melvin Caceres on Mar 19, 2009 4:02 AM

Similar Messages

RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C

Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
Vijay

Hello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay

RFC call fails while implementing Inovis EDI. ' NO AUTORITY FOR CONNECTION

Hi All,
We are implementing 'Inovis's' EDI solution. I have narrowed done the error to note 618941. It is telling me to modify the SEC file to allow a RFC_REMOTE_EXEC call.The SEC file came down in the form of a physical file. So I am really not sure what to do here. I don't know where this file should reside. Any ideas?
Thanks!!
Diana

I figured it out. Thanks.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Issue while installing WCS using omii.ini: Database ping failed

Hi,
I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server".
Following are the things I have been able to do successfully:
Install Oracle DB, create a database and then create a user for this database
Install WebLogic server, create domain, create admin server, managed server, and finally create a datasource. THe datasource connection to the DB created in step 1 above is successfull.
I downloaded the WCS installer from Oracle Website 'WebCenterSites_11.1.1.6_bp1'. I am installing using silent installer using omii.ini file.
During installation, on receiving the prompt to install CS and CAS applications, I installed them successfully via WebLogic console.
I tested the URL 'http://localhost:7001/cs/HelloCS' and it showed me the Oracle WCS 11g page.
Now, when I go back to the wcs installation terminal and hit Enter, it gives following error:
[2013-07-11 01:32:21.861][CS.INSTALL][INFO] 1. If your platform requires you to manually deploy the Sites application, deploy Sites now. Otherwise, continue with step 2 2. Restart your application server. 3. Test the URL http:////HelloCS to see if application is deployed successfully 4. If the test is successful, press ENTER. URL http://localhost:7001/cs/HelloCS [2013-07-11 01:41:16.841][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://localhost:7001/cs/HelloCS [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Web Server and Application Server Configuration test finished successfully. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Attempting to Ping the Database. [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Database Ping was attempted with WCSDataSource as the DSN. The URL that was passed in = http://localhost:7001/cs/CatalogManager. Please Check your connection and property files settings. [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Install was unable to ping the database. Installation has halted. [2013-07-11 01:41:17.461][CS.INSTALL][ERROR] Worker.run. Install failed. Please check log file. Click Yes to modify your install choices and re-try install. Click No to terminate application.
It looks like DB ping is getting failed.
But I am not sure how to resolve this error.
Please help. I am pasting the content of my bea_omii.ini file that I have used. (Please view as HTML, as formatting is getting lost on this page.)
Do let me know if any other information is required from my end.
bea_omii.ini:
#ContentServer install properties #Thu Apr 17 12:03:27 IST 2008 # Content Server Information # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall CSInstallDirectory=/home/oracle/WCS # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared CSInstallSharedDirectory=/home/oracle/WCS/Shared # For delivery installation set Development to false Development=true # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster #CSInstallType=single # This is to select APPSERVER Note: PORTALSERVER is not supported CSInstallPlatformType=APPSERVER # Set the application/portal server you want to install # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat) CSInstallAppServerType=wls92 # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3 # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3 CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3 # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain CSInstallAdminDomainName=WCSDomain # Option for manual deployment (Should always be set to true) CSInstallbManual=true #Manual deployment needs to set the path where installer has to explode the war CSManualDeployPath=/home/oracle/WCS/deployment # Set the context path for your web application for example /cs/ sCgiPath=/cs/ # Set the database type Possible options #CSInstallDatabaseType= [SQL Server, DB2, Oracle10] CSInstallDatabaseType=Oracle10 # Set the data source name CSInstallDBDSN=WCSDataSource # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster. CSInstallType=single #WEM installation IsWEMInstall=TRUE #hostname where cs is installed CASHostName=localhost # port number of cs installation CASPortNumber=7003 #Server HostName of internally accessible CAS CASHostNameLocal=localhost #Server PortNumber of internally accessible CAS CASPortNumberLocal=7003 #Server HostName where CAS is actually deployed CASHostNameActual=localhost # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger LoggerName=org.apache.commons.logging.impl.Log4JLogger # Set the host name where the application will be running CSInstallWebServerAddress=localhost # Set the port number where the application will be running CSInstallWebServerPort=7001 # Set this property to true if you are installing Spark CSInstallSpark=false # Sample Sites Information # Set this true if you want to install Avisports sample site. Avisports=true # CS-Direct and CS-Direct Advantage properties. Please don't touch them ContentCentre=true CatalogCentre=true # Set this true if you want to install CS Engage otherwise false MarketingStudio=true # Set this to true if you want to install Commerce Connectors CommerceConnector=true # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode FSCore=true # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore FSEngageCore=true # Set this to true to install Store Schema. This depends on Development and FSCore FSStoreSchema=true # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore FSEngageStoreSchema=true # Set this to true to install Document Schema. This depends on Development and FSCore FSDocSchema=true # Set this to true to install Sample Visitors. This depends on Development and FSCore FSLocalUser=true # Set this to true to install Pretty URL Package. This depends on Development and FSCore FSPrettyURL=true # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema FSStoreDemoData=true # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema FSDocDemoData=true # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema FSEngageStoreDemoData=true # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema FSSiteView=true # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre FSAnalytics=true # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre CCSampleAssets=true # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre CCSampleAssetsBF=true # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre MSSampleAssetsBF=true # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre CCSampleAssetsHW=true # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre CatCSampleAssets=true # Set this to true to install Hello World sample site. This depends on Development and ContentCentre CCSampleSiteHW=true # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF CCSampleSiteBF=true # Set this to true to install Burlington Financial Extensions sample site. MSSampleSiteBF=true # Set this to true to install GE Lighting sample site. MSSampleSiteGE=true # Spark sample site components # Set this to true to install Document Management sample asset types DMSampleAssets=false # Set this to true to install Content Management sample asset types WCMSampleAssets=false # Set this to true to install Base Components SparkSampleSite=false # Set this to true to install Sample Data SparkSampleData=false # Set this to true to install Sample Portlets. Set this true if this is a portal server SparkSamplePortlets=false

Thanks for your reply Yct.
I got the ping issue resolved today, there was an issue in the data source. Finally I was able to complete the installation successfully.
But there is one more issue now. After completing the installation, I am trying to access the URL to get to the WCS login page, but with no success.
Below, I am mentioning few URLs that I tried, and the outcome:
http://localhost:7001/cs/HelloCS , This URL gives me a page with some static content messages like 'Welcome to Oracle WebCenter Sites 11gR1'. Then there are some text lines in blue color. I think this page is working as expected.
http://localhost:7001/cs/login , this URL automatically gets redirected to the URL 'http://localhost:7003/cas/login?service=http%3A%2F%2Flocalhost%3A7001%2Fcs%2Fwem%2Ffatwire%2Fwem%2FWelcome' and I get an error message 'Firefox can't establish a connection to the server at localhost:7003.'
http://localhost:7001/cas/login, this takes me to login page, where when I enter fwadmin@xceladmin credentials, I am taken to JASIG Central Authentication Service page, which is again static, and I can't do anything on this page
http://localhost:7001/cs/Satellite?c=Page&cid=1327351719456&pagename=avisports%2FPage%2FHomeLayout1 , this takes me to the Avisports site, which is functional
http://localhost:7001/cs/Satellite?c=Page&childpagename=FirstSiteII%2FFSIILayout&cid=1124747609916&pagename=FSIIWrapper, this takes me to he FirstSit page, which is again functional
Issue: I am not getting the main login page, where I would get 3 sites(Avisports/FirstsiteII) in the dropdown.
Looks like there is something wrong going on.
Following I am pasting my omii.ini file, if it helps:
#ContentServer install properties
#Thu Apr 17 12:03:27 IST 2008
# Content Server Information
# Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall
CSInstallDirectory=/home/oracle/WCS
# Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared
CSInstallSharedDirectory=/home/oracle/WCS/Shared
# For delivery installation set Development to false
Development=true
# CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster
#CSInstallType=single
# This is to select APPSERVER Note: PORTALSERVER is not supported
CSInstallPlatformType=APPSERVER
# Set the application/portal server you want to install
# Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat)
CSInstallAppServerType=wls92
# Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3
# on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3
CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3
# [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain
# on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain
CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain
# [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain
CSInstallAdminDomainName=WCSDomain
# Option for manual deployment (Should always be set to true)
CSInstallbManual=true
#Manual deployment needs to set the path where installer has to explode the war
CSManualDeployPath=/home/oracle/WCS/deployment
# Set the context path for your web application for example /cs/
sCgiPath=/cs/
# Set the database type Possible options
#CSInstallDatabaseType= [SQL Server, DB2, Oracle10]
CSInstallDatabaseType=Oracle10
# Set the data source name
CSInstallDBDSN=WCSDataSource
# By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster.
CSInstallType=single
#WEM installation
IsWEMInstall=TRUE
#hostname where cs is installed
CASHostName=localhost
# port number of cs installation
CASPortNumber=7003
#Server HostName of internally accessible CAS
CASHostNameLocal=localhost
#Server PortNumber of internally accessible CAS
CASPortNumberLocal=7003
#Server HostName where CAS is actually deployed
CASHostNameActual=localhost
# Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog
# com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger
LoggerName=org.apache.commons.logging.impl.Log4JLogger
# Set the host name where the application will be running
CSInstallWebServerAddress=localhost
# Set the port number where the application will be running
CSInstallWebServerPort=7001
# Set this property to true if you are installing Spark
CSInstallSpark=false
# Sample Sites Information
# Set this true if you want to install Avisports sample site.
Avisports=true
# CS-Direct and CS-Direct Advantage properties. Please don't touch them
ContentCentre=true
CatalogCentre=true
# Set this true if you want to install CS Engage otherwise false
MarketingStudio=true
# Set this to true if you want to install Commerce Connectors
CommerceConnector=true
# Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode
FSCore=true
# Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore
FSEngageCore=true
# Set this to true to install Store Schema. This depends on Development and FSCore
FSStoreSchema=true
# Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore
FSEngageStoreSchema=true
# Set this to true to install Document Schema. This depends on Development and FSCore
FSDocSchema=true
# Set this to true to install Sample Visitors. This depends on Development and FSCore
FSLocalUser=true
# Set this to true to install Pretty URL Package. This depends on Development and FSCore
FSPrettyURL=true
# Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema
FSStoreDemoData=true
# Set this to true to install Document Demo Data. This depends on Development and FSDocSchema
FSDocDemoData=true
# Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema
FSEngageStoreDemoData=true
# If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema
FSSiteView=true
# Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre
FSAnalytics=true
# Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre
CCSampleAssets=true
# Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre
CCSampleAssetsBF=true
# Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre
MSSampleAssetsBF=true
# Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre
CCSampleAssetsHW=true
# Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre
CatCSampleAssets=true
# Set this to true to install Hello World sample site. This depends on Development and ContentCentre
CCSampleSiteHW=true
# Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF
CCSampleSiteBF=true
# Set this to true to install Burlington Financial Extensions sample site.
MSSampleSiteBF=true
# Set this to true to install GE Lighting sample site.
MSSampleSiteGE=true
# Spark sample site components
# Set this to true to install Document Management sample asset types
DMSampleAssets=false
# Set this to true to install Content Management sample asset types
WCMSampleAssets=false
# Set this to true to install Base Components
SparkSampleSite=false
# Set this to true to install Sample Data
SparkSampleData=false
# Set this to true to install Sample Portlets. Set this true if this is a portal server
SparkSamplePortlets=false

[svn:bz-trunk] 10026: Fixed a bug around handling ping commands while running load-testing-tool against Servlet-based endpoints .

Revision: 10026
Author:   [email protected]
Date:     2009-09-04 10:28:18 -0700 (Fri, 04 Sep 2009)
Log Message:
Fixed a bug around handling ping commands while running load-testing-tool against Servlet-based endpoints.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java

Calling RFC Adapter fails - convert error

Hi,
I have a problem with calling RFC Adapter. I'm using JDBC->XI->RFC scenario. JDBC does just "select 'W' from dual". In the destination SAP system RFC function is created for test purposes. This function has one parameter - string type. After calling it, it should write a sysdate into the SAP Z_ table. The XI should call the function with the 'W' parameter. But this fails. Everything is ok, but calling the RFC returns following error (copied from the Runtime Workbench -> Message Monitoring :
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$Exception: (130) JCO_ERROR_XML_PARSER: Expecting a tag to begin with '<' instead of 'W', in "u
(Yes, this is thw whole error message. I don't know what u should be...)
Did someone get this error?
Thanx 4 answers, Peter

Hello all,
Let me reopen the topic of my colleague. I'm facing the same error though with bit different symptoms. Here it is.
ERROR msg:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$Exception: (130) JCO_ERROR_XML_PARSER: Expecting a tag to begin with '<' instead of 'Z', in "T
The XML message (MainDocument):
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_BAPI_ACCESSIBILITY_TEST_XI xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<BAPI1008 />
<PARAM>Z_XID_500_ACC</PARAM>
<ZTTOTH_BAPI1008 />
- <b><ZTTOTH_STRUCT>
<PARAM1></b>Z_XID_500_ACC</PARAM1>
</ZTTOTH_STRUCT>
</ns0:Z_BAPI_ACCESSIBILITY_TEST_XI>
According to the error message the parser expects behind string ...<ZTTOTH_STRUCT><PARAM1> another tag, but the question is why.
To make all this more funny here I paste another XML message of BAPI calling which works fine (without the error described above):
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_BAPI_PARAMETERS_TEST_XI xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<PARAM>Z_XID_500</PARAM>
- <ZTTOTH_STRUCT>
<PARAM1>Z_XID_500</PARAM1>
</ZTTOTH_STRUCT>
</ns0:Z_BAPI_PARAMETERS_TEST_XI>
The BAPI functions are absolutely the same except those other two import-pramater structures (BAPI1008 and ZTTOTH_BAPI1008). I'm gonna to try to add those import-parameter structures into Z_BAPI_PARAMETERS_TEST_XI, but anyway - this is weird.
Does anybody have an idea, what should be wrong ?
Thx. Tom
Message was edited by: Tomas Toth

First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

Error in START_SHDI_FIRST... RFC logon fails

Hello All,
I cannot get past a step in the enhancement package 4 installation. The step is called: START_SHDI_FIRST. The error says to troubleshoot by looking at 2 logs, STARTSFI.LOG and DEVTRACE.log.   extracted below.
The problem can be described this way. The step begins as the installer tries to start the shadow system.   The first attempt stopped and I could see that the shadow was not started. I used the information in note 525677 to manually start the shadow and could verify that it was starting.
The screen says to retry until I can logon to the shadow.   I am able to logon as user SAP* with password pass in client 000.   I am not able to logon as myself and receive the message: Logon not possible (error in license check).
As SAP* I use the transaction SLICENSE, and could see that the maintenance certificate had expired. I loaded that certificate without an error.
I also see that the hardware key information is missing. SAP* is not allowed to update that information.
I believe that no other user will be able to logon as long as the license is an issue.   The installer is trying to do a remote logon to verify that the system is up (my interpretation) .
I also see this information in the shadow system dev_W1 log.
M *** ERROR => ThMsGetHardwareId: ThOpcodeToMsg failed (1) [thxxmsg.c    3095]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c   511]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1301]
M *** ERROR => likey_get_validity_dates: Error getting the hardware key. You might find some information in file "dev_ms" on the message server
M
M Thu Jul 29 15:18:28 2010
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c   17580]
M
M Modeinfo for User T8/M1
So, am I correct in seeing that the missing hardware key is the problem in the shadow system?   Any ideas would be appreciated, otherwise I will clear the systems out and start over. Thanks.
Pat.
Below is the DEVTRACE   (extract)
Directory: /usr/sap/TEH/EHPI/abap/log
Name:       DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "701"
sysno      15
sid        TEH
systemid   324 (IBM iSeries with OS400)
relno      7010
patchlevel 0
patchno    69
intno      20020600
make:      single threaded, ASCII, 64 bit, optimized
pid        103802
Thu Jul 29 14:54:58 2010
kernel runs with dp version 243(ext=110) (@(#) DPLIB-INT-VERSION-243)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 103802) [dpxxdisp.c   1287]
     shared lib "dw_xml.so" version 69 successfully loaded
     shared lib "dw_xtc.so" version 69 successfully loaded
     shared lib "dw_stl.so" version 69 successfully loaded
     shared lib "dw_gui.so" version 69 successfully loaded
     shared lib "dw_mdm.so" version 69 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3615
MtxInit: 30000 0 0
Thu Jul 29 14:54:59 2010
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x7000000b0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Thu Jul 29 14:55:00 2010
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   13279]
DpSetProcessPriority: Run priority for work process startup adjusted to 20
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jul 29 14:55:01 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0I=> NiPConnect: connect (79: Connection refused) [nixxi.cpp 2519]
ERROR => NiPConnect: SiConnect failed for hdl 2 / sock 9
    (SI_ECONN_REFUSE/79; I4; ST; 10.127.0.100:3615) [nixxi.cpp    2519]
ERROR => MsIAttachEx: NiBufConnect to omni/3615 failed (rc=NIECONN_REFUSED) [msxxi.c      652]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1816]
Thu Jul 29 14:55:19 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jul 29 14:55:53 2010
***LOG Q0I=> NiPConnect: connect (79: Connection refused) [nixxi.cpp 2519]
ERROR => NiPConnect: SiConnect failed for hdl 3 / sock 10
    (SI_ECONN_REFUSE/79; I4; ST; 10.127.0.100:3615) [nixxi.cpp    2519]
ERROR => MsIAttachEx: NiBufConnect to omni/3615 failed (rc=NIECONN_REFUSED) [msxxi.c      652]
Thu Jul 29 14:56:34 2010
ERROR => MsISnd2: not_attached [msxxi.c      1321]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   5007]
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 01] Thu Jul 29 14:54:56 2010
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7010
patchlevel 0
patchno    63
intno      20020600
make:      multithreaded, ASCII, 64 bit, optimized
pid        103801
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 103801) [msxxserv_mt. 1853]
[Thr 01] Thu Jul 29 14:54:57 2010
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3239]
[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 7
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:3615) [nixxi.cpp    3239]
[Thr 01] *** ERROR => MsSCommInit: NiBufListen(3615) (rc=NIESERV_USED) [msxxserv_mt. 10222]
[Thr 01] *** ERROR => MsSInit: MsSCommInit (internal) [msxxserv_mt. 1903]
[Thr 01] *** ERROR => main: MsSInit [msxxserv_mt. 5983]
[Thr 01] ***LOG Q02=> MsSHalt, MSStop (Msg Server 103801) [msxxserv_mt. 6030]
trc file: "dev_rd", trc level: 1, release: "701"
Thu Jul 29 14:55:00 2010
Shared memory semaphore administration area size = 10608
Thu Jul 29 14:55:06 2010
***LOG S00=> GwInitReader, gateway started ( 103807) [gwxxrd.c     1758]
systemid   324 (IBM iSeries with OS400)
relno      7010
patchlevel 0
patchno    68
intno      20020600
make:      single threaded, ASCII, 64 bit, optimized
pid        103807
gateway runs with dp version 243(ext=110) (@(#) DPLIB-INT-VERSION-243)
gateway (version=701.2009.09.28)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Thu Jul 29 14:55:09 2010
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw15 (socket) to port 3315
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
MtxInit: -2 0 0
Thu Jul 29 14:55:47 2010
GwDpInit: attached to gw_adm at 700000080599e90
Thu Jul 29 14:55:48 2010
DpSetProcessPriority: Run priority for gwrd adjusted to 12
AN EXTRACT OF STARTSFI_LOG
Directory: /usr/sap/TEH/EHPI/abap/log
Name:       STARTSFI.LOG
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20100729145436")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399   dbs_db4_schema=<null>
4 ETQ399   auth_shadow_upgrade=<null>
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_db4_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_db4_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399   default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ399 Stopping shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
3 ETQ399 Executing command: 'startsap SID(TEH) INSTANCE(15) PROFILE('/usr/sap/TEH/EHPI/abap/TEH/SYS/profile/START_DVEBMGS15_omni')'.
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-1"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally

Hi,
You are getting this error because your hardware key in the license installed in slicense is wrong. Since upgrade tries to login with ddic user and if there is problem with license then only SAP* user is allowed.
Please perform below steps to resolve the problem. Check at OS level what is the hardware key, if the hardware key that is present in slicense is different then generate a permanent license of that hardware key and apply it in shadow instance. After that check whether you are able to login with user other than SAP*, if yes, then repeat the phase.
Please perform above steps and let us know the result.
Thanks
Sunny

ORA-00607: Internal error occurred while making a change to a data block

hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start database

Duh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC

How to save CSV file in application server while making infospoke

How to save CSV file in application server to be used as destination while making infospoke.
Please give the steps.........

Hi
If you want to load your flatfile from Application server,then you need to trasfer your file from your desktop(Computer) to Application server by using FTP.
Try using ARCHIVFILE_CLIENT_TO_SERVER Function module.
You Just need to give thesource path and the target path
goto SE37 t-code , which is Function module screen, give the function name ARCHIVFILE_CLIENT_TO_SERVER, on click F8 Execute button.
for path variable give the file path where it resides like C:\users\xxx\desktop\test.csv
for target path give the directory path on Application server: /data/bi_data
remember the directory in Server starts with /.
U have to where to place the file.
Otherwise use 3rd party tools to connect to ur appl server like : Core FTP and Absolute FTP in google.
Otherwise...
Goto the T.code AL11. From there, you can find the directories available in the Application Server.
For example, if you wanna save the file in the directory "DIR_HOME", then you can find the path of the directories in the nearby column. With the help of this, you can specify the target path. Specify the target path with directory name followed by the filename with .CSV extension.
Hope this helps
regards
gaurav

How to reflect a new field in Bank data while making payment through F-53?

Hello Experts,
How can i reflect a new field (payment reference) in bank data while making payment through F-53?
I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment.
I tried it at both level,fsg anf posting key,But no use.
Is there any other process to make available and required field in BANK DATA of vendor payment?
Please suggest .
Regards,
Sumeya offrin

Hello Sumeya,
Please consider note 145864 which explains what you have to do to
make this field visible in your selection criteria:
"In Transaction FB00 (Financial Accounting Editing Options -> Open items
activate the flag 'Payment reference as selection criterion'.
This is valid for incoming payment; please test if the same procedure
is valid for outgoing payment as well.
I check the issue, and unfortunately these function seems to not be supported for vendor open items.
When you try to select the 'Payment Reference' in Additional selections
the following messages is arised:
'No account specified, items selected via document no. or reference'
That means,when you do not specify an account in F-53 you can only
via Reference and/or document. This is not a bug but system design.
For additional reference you can check the note 451105.
The note made clear that the specification of an account is required for vendors during the selection via payment
reference.
Kind Regards,
Fernando Evangelista

Compilation failed while executing: ADT

I have a project that I've been successfully compiling for iOS in Flash Professional 5.5, with uses AIR 2.6. I decided to try compiling in Flash Builder 4.6 using AIR 3.1. It runs fine on the desktop, no errors or warnings. When I try to do an Ad Hoc release build, it fails with java.lang.NullPointerException at java.util.TreeMap.getEntry(TreeMap.java:324), (The Export Release Build dialog does not let me select the text, otherwise I'd paste the stack here)starting at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82) and saying "Compilation failed while executing: ADT"
Any suggestions would be appreciated!
Regards,
John

Hi John,
Could you please try packaging it on command line using ADT (available @ C:\Program Files\Adobe\Adobe Flash Builder 4.x\sdks\4.x\bin)
# adt -package -target ipa-ad-hoc -provisioning-profile <path to mobileprovision> -storetype pkcs12 -keystore <path to p12> -storepass <password> hellworld.ipa hellworld-app.xml hellworld.swf
Is it specific to ipa-ad-hoc target only? Could you try it with other targets like ipa-app-store or ipa-test-interpreter
Please share the adt version by executing following command.
# adt -version
-Thanks
Pahup

(App-store) Compilation failed while executing : compile-abc

I just upgraded to AIR16 and can no longer compile for the ios app store from Windows 7.
Calling "adt -package -target ipa-test ..." with AIR16 works correctly, installs and runs on my device.
Calling "adt -package -target ipa-app-store ..." with AIR16 crashes the compiler with this generic error:
Compilation failed while executing : compile-abc
Calling "adt -package -target ipa-app-store ..." with AIR14 (and the new compiler, not legacy) works correctly.
How do I get more information about what is happening? I have no ANEs. Could this have something to do with the new 64-bit requirements? My version of Java? With provisioning profiles? What else is different between test and app-store compile modes?

Update: I tried a half dozen different ways to compile with AIR16 to no joy. Test works fine, App Store compile fails.
Then finally tried the current AIR17 beta which DOES work. I don't see anything in the release notes about fixing ios app-store compile issues, though there's a new known ios-related bug with textfields.
Does ADT produce an error log file somewhere? I'd like to get more info about this "Compilation failed while executing : compile-abc" error if I ever run into it again.

RFC Ping failed while making test in RFCPTEST

Similar Messages

Maybe you are looking for