RFC Receiver Adapter Issue

Hi all,
I'm sending a sales order from my ftp server to my R/3 system through RFC. I want this sales order to be created in the R/3 system, For this i'm using BAPI_SALESORDER_CREATEFROMDAT2. Now when i'm configuring my RFC Receiver adapter using the help given on the help.sap.com under "adapters"->"rfc adapter"-> "configuring the rfc adapter", i'm not able to find the parameters mentioned under " Advanced Mode" Heading. In this page, it says that after checking the Advanced mode checkbox, one should get the additional parameters and then we need to set the indicater for the parameter "Commit Control for Individual BAPI Calls". Since i'm not able to find these parameters even after checking the chekbox, i'm stuck. I understand that if i don't get this parameter, my BAPI will not commint and hence the sales order will not be created in R/3.
Kindly suggest.
Regards.
Naveen

Hi Naveen -
>>><i>In this page, it says that after checking the Advanced mode checkbox, one should get the additional parameters and then we need to set the indicater for the parameter "Commit Control for Individual BAPI Calls". Since i'm not able to find these parameters even after checking the chekbox, i'm stuck.</i>
For this I agree with Sameer. It's probably an adapter metadata issue. As mentioned your XI system needs to be at least on SP14. Also, in the Int. Repository, check SAP BASIS 6.40 SWC SP Level by right clicking on the SAP BASIS 6.40 SWCV, then Display Support Package - this is where the adapter metatdata is delivered. By default, the highest one displayed is wha'ts current on the system. You should see at least SP14 here. Incidentally, this does not confirm the SP level that the rest of the XI components are on, just this SWC.
>>><i>When i checked in the integration engine, transaction sxmb_moni, i found that the message was processed successfully ! But when i checked in my R/3 system, i didn't find any sales order ! Kindly give me some inputs for this issue.</i>
It probably failed in the adapter engine. Check the adapter engine monitor via the RWB - so once in RWB, goto Message Monitoring, select Adapter Engine (important), then look for your message.
Regards,
Jin
Message was edited by: Jin Shin

Similar Messages

RFC Receiver adapter issue. Pls advice

Hi All,
When XI is sending data back to R/3 system though RFC Receiver Adapter I am getting the below error. Any suggestions
Error Category XI_J2EE_ADAPTER_RFC
Error Code RECEIVER_GENERAL_ERROR
Pls advice.

Rick, your question is very unspecific, so anyone trying to help can only guess very roughly.
So I only have a very rough hint for you, which is the FAQ for RFC adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373330383730%7d

RFC receiver adapter issue - ECC side we are seeing blank data for the RFC

Hi All,
We are using Receiver RFC adapter to call a custom RFC (Synchronous call). It was working fine, but recently RFC was modified (They added new fields). We re-imported the RFC into ESR and also modified the mapping to reflect the new RFC strucuture. Now when we execute the RFC, at the ECC side no data is beeing seen. On the PI side we see data in sxmb_moni. It looks fine. However we don't see anydata in ECC. We did full cache refresh but it did not help.
Please let me know if anyone has any thoughts on this issue.
Thanks
-Pradeep

I enabled the the RFC adapter trace in PI. It appears like adapter is not sending the structure and tabled that are populated. IT is sending only 230 bytes. Any clue why would rfc adapter drop the tables and structures??
FUNCTION Z_FI_AA_BAPI_ASSET_CHANGE
    handle = 2
    parameter   = <null>
    parameter   = <null>
    tables = <null>
>>>> [2] <unknown> EXT <ac: 6> >>> FLUSH (READ) (88578752)
Send RFCHEADER [2]: 01/BIG/IEEE/SPACE-U2/52494850
Send UNICODE-RFCHEADER [2]: cp:4102/ce:IGNORE/et:6/cs:2/rc:0x00000023
UUID: send_rfcuuid B6D708F0-B946-11E0-BC35-EEB4AC138154
UUID: RfcCallNew send the uuid to the partner:B6D708F0-B946-11E0-BC35-EEB4AC138154
>>>> [2] <unknown> EXT <ac: 7> >>> WRITE (88578752)
000000 | 01010008 01020105 04010002 01010103 |................
000010 | 00040000 020B0103 0106000B 04010002 |................
000020 | 01060200 00002301 06000700 1A003100 |......#.......1.
000030 | 37003200 2E003100 39002E00 31003200 |7.2...1.9...1.2.
000040 | 39002E00 38003400 07001100 02004500 |9...8.4.......E.
000050 | 11001200 06003600 34003200 12001300 |......6.4.2.....
000060 | 08003700 30003000 20001300 08001800 |..7.0.0. .......
000070 | 73006100 70007000 69002D00 64006500 |s.a.p.p.i.-.d.e.
000080 | 76002D00 64003100 08000600 28007300 |v.-.d.1.....(.s.
000090 | 61007000 72006400 62002D00 64006500 |a.p.r.d.b.-.d.e.
0000a0 | 76002D00 64003000 5F004400 52003300 |v.-.d.0._.D.R.3.
0000b0 | 5F003000 30000605 140010B6 D708F0B9 |_.0.0...........
0000c0 | 4611E0BC 35EEB4AC 13815405 14050200 |F...5.....T.....
0000d0 | 00050200 0B000600 36003400 32000B01 |........6.4.2...
0000e0 | 02003200 5A005F00 46004900 5F004100 |..2.Z._.F.I._.A.
0000f0 | 41005F00 42004100 50004900 5F004100 |A._.B.A.P.I._.A.
000100 | 53005300 45005400 5F004300 48004100 |S.S.E.T._.C.H.A.
000110 | 4E004700 45010203 37000003 37051400 |N.G.E...7...7...
000120 | 10B6D708 F0B94611 E0BC35EE B4AC1381 |......F...5.....
000130 | 54051401 3100E62A 54482A03 00E60000 |T...1..TH.....
000140 | 00000000 00000000 00000000 00000000 |................
000150 | 00000000 00000000 00000000 00000000 |................
000160 | 00000000 00000000 00000000 00000000 |................
000170 | 00000000 00000000 00000000 00000000 |................
000180 | 00000000 00000000 00000000 00000000 |................
000190 | 00000000 00000000 00000000 00000000 |................
0001a0 | 00000000 00000000 00000000 73617070 |............sapp
0001b0 | 692D6465 762D6431 5F445049 5F313839 |i-dev-d1_DPI_189
0001c0 | 34303530 00000000 00000000 63303432 |4050........c042
0001d0 | 35313733 62393435 31316530 38373562 |5173b94511e0875b
0001e0 | 30303030 30303163 65366132 00000000 |0000001ce6a2....
0001f0 | 02C04251 73B94511 E0875B00 00001CE6 |..BQs.E...[.....
000200 | A2B6D708 F0B94611 E0BC35EE B4AC1381 |......F...5.....
000210 | 54000000 01000000 002A5448 2A0131FF |T........TH.1.
000220 | FF0000FF FF000000 00000000 00000000 |................
   >> CPIC native call CMSEND [2] convid: 88578752 14:23:39,159
   << CPIC native call CMSEND [2] convid: 88578752 rc: 0 14:23:39,159

Java.lang.NullPointerException in RFC Receiver Adapter

Hi Experts,
i have configured SQL Sender Adapter and this works fine, i can see the payload. and at the receiver adapter i have configured RFC Receiver Adapter this is throwing NullPointerException as mentioned below.. can someone help me out to fix this issue..
Error Description:
Error     Exception caught by adapter framework: null
Success     MP: Processing local module localejbs/AF_Modules/RequestResponseBean
Error     MP: Exception caught with cause java.lang.NullPointerException
Error     Delivery of the message to the application using connection
                RFC_http://sap.com/xi/XI/System failed, due to:
                com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
Success     The message status set to WAIT.
Thanks,
Srikanth

Hi Srikanth,
This error Occurs because of incomplete configuration in the reciever communication channel.Please check all the required configurations in the reciever communication channel and then activate the channel.
Regards,
Naveen

Error in RFC Receiver Adapter: functiontemplate from repository was null

Hi Friends,
i am working on JDBC -> RFC Scenario, JDBC Sender Adapter is working fine, but RFC Receiver Adapter is throwing this error message... can some one help me to solve this issue...
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Thanks
Srikanth

Hi,
I think the logon details what you are giving in Receiver CC may be wrong. Check all those details like Application Server,System Number,User,Password and client.
Thanks.

Error in RFC Receiver Adapter: functiontemplate from repository

Hi Experts,
i am working on JDBC -> RFC Scenario, JDBC Sender Adapter is working fine, but RFC Receiver Adapter is throwing this error message... can some one help me to solve this issue...
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Thanks
Srikanth

Possible reasons are
The XML document, which was send to the RfcAdapter, is not a RFC-XML document. So the root element name of this document is not the name of a function module and thus can't be found in the metadata repository.
The metadata repository doesn't contain an entry for this function module name. Normally the metadata repository will be an R/3 system and it's function module repository can be searched with transaction code SE37.
Here my suggestion is, if you are using Java/xslt mapping, write your code in line with result structure of your mapping instead source pay load structure. May be helpful.
Cheers
Madhu

RFC Receiver Adapter and RFC Destination -- Help

Hi,
I would like to configure the RFC Receiver Adapter for the invokation of a RFC on SAP System (Name: ALPHA) using a RFC destination provided by another system named BETA.
I have set External Server as server type.
My first question is: I have to quote an application server gateway and a gateway service. Is this information related to a service on ALPHA or BETA?
My second question is:
It is also necessary to provide a Programm-ID. The destination on BETA is a R/3 connection and doesn't have a programm id. Where do I get this from?
And my last question is:
Is at all possible to use the RFC destination on BETA?
Any help is really appreciated...
Kind regards,
Heiko

Hi Heiko,
I don't fully understand your need but:)
since both of your systems are SAP systems
why are you trying to use external server?
can't you just call RFC on BETA
and inside this RFC on beta call RFC on ALPHA?
in a sync or async way?
can you tell a little more about your requirement ?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

RFC Receiver Adapter Problem- Sending Blank XML Node

Hi,
I'm using the RFC receiver adapter to call a RFC in R/3 from XI 3.0
In the payload XML one node is blank as I want to pass a blank parameter to the RFC. But in R/3 the blank node is getting converted to #
Can anyone suggest how can I pass a blank node while calling the RFC using RFC receiver adapter in XI 3.0?
Thanks in advance,
Dipankar

Hey
Please check the outbound payload in sxmb_moni and RWB,if the field is blank there,then it means that PI is passing correct value to ECC.its possible that RFC has been coded in such a way that it converts blank spaces to #.Please look at RFC documentation in that case and see if it helps more.
If the outbound payload itself in PI is showing as # instead of blank,then check the message mapping in PI.
Thanx
Aamir

RFC Receiver Adapter (Problem)

Hi All,
I have configured RFC Receiver Adapter : Here i have imported a Z FM for example
"" Z_API_DOCUMENT_CREATE_TEST "" having below import paramaters:
LF_DOCNUMBER     TYPE     BAPI_DOC_DRAW-DOCUMENTNUMBER
IV_PF_HTTP_DEST     TYPE     RFCDES-RFCDEST
IV_PF_FTP_DEST     TYPE     RFCDES-RFCDEST
LF_FILENAME     TYPE     BAPI_DOC_DRAW-DOCUMENTNUMBER
1) Now i use MM to fill in two parameters : LF_DOCNUMBER , LF_FILENAME
If my FIle is of kind : test55.pdf     --> LF_DOCNUMBER = test55
                                                       LF_FILENAME       = test55.pdf
For this i have checked in Sender File Adapter "Adapter Specific Message Attributes"
So i write UDF to capture Filename and Filename with extension to fill above shown parameters.
Now i saw target xml after mapping in CC monitor of RWB is as below
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_API_DOCUMENT_CREATE_TEST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<IV_PF_FTP_DEST>SAPFTPA</IV_PF_FTP_DEST>
<IV_PF_HTTP_DEST>SAPHTTPA</IV_PF_HTTP_DEST>
<LF_DOCNUMBER>xierror</LF_DOCNUMBER>
<LF_FILENAME>xierror.doc</LF_FILENAME>
</ns0:Z_API_DOCUMENT_CREATE_TEST>
But LF_FILENAME is getting populated to my Z FM at runtime but LF_DOCNUMBER works fine filling up with value.
But when i run the FM using F8 it works , what could be the problem.
Any advice
regards
Srinivas

Hi,
The problem is with the Data types used for LF_DOCNUMBER.
Make this as Char or Numeric in FM and then try. If its of any packed values then conversion will create the problem
Thanks
Swarup

Dynamic Logon Data in RFC receiver adapter?

Does someone know if and how the logon data (userid) defined in the communication channel for a RFC receiver adapter can be dynamic overwritten? For example using information from the payload?
Scenario: A request for getting HR data is send from a legacy system to XI, mapped to a RFC and routed to R3.
The audit people want to see a real user login into the R3 system to execute the function module and not the technical user defined in the communication channel.

That's exactly what principal propagation is.
You just have to make some (quite a lot, actually) configurations to enable it.
Check these links:
Online documentation: http://help.sap.com/saphelp_nw70/helpdata/en/45/0f16bef65c7249e10000000a155369/frameset.htm
Weblog: /people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
Regards,
Henrique.

How to configure RFC receiver adapter

HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.

Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam

SAP PI Issue with RFC Receiver Adapter

Hello,
Iam using File-RFC scenario, where every thing executed fine, but in ECC iam unable to get the DATA coming from PI, Iam using Z RFC to insert data to a Z table.
I did'nt any errors in PI, is there any option to find the output data at receiver adapter where iam using RFC adapter.
Kindly Help,
Thanks in Advance,
Ravi.

Yes. If you enable the logging you should be able to see the post mapping xml.
Message Staging and Logging Options in Advanced Adapter Engine of PI 7.3x
Scenario specific message staging and logging in PI 7.31 AAE
Did you debug the RFC with test data? were you able to insert something?

RFC Destination type RFC Receiver Adapter?

Hi,
What is the RFC destination type for Sender RFC Adapter?
and what is the need a Program ID for sender Adpter.
What is the RFC destination type for Receiver RFC Adapter?
Regards
Gopi

When we use the RFC Adapter?
SAP systems up to and including SAP Release 4.6 are not able to exchange data by using XML messages and http. The only way you can connect such systems to the Integration Server directly is by using the RFC adapter (or the IDoc adapter).
You require the sender adapter if you want to use the Integration Engine to process RFCs. The RFC adapter converts the incoming RFC data to XML message format (RFC XML) so that it can be processed by the Integration Engine.
You require the receiver adapter if the determined receiver system expects the data from the Integration Engine to arrive in RFC format. In this case, the Integration Engine must transfer the received XML message (RFC XML) to the RFC adapter. The RFC adapter converts the RFC XML message to a valid RFC call and executes the call.
The following three scenarios are possible when using the RFC adapter and the Integration Engine:
    1) SAP R/3 to SAP NetWeaver Application Server
    2) SAP NetWeaver Application Server to SAP R/3
    3) SAP R/3 to SAP R/3
When we use ABAP Proxy ?
SAP systems based on Web AS 6.40 and higher are able to exchange data by using messages and HTTP. These systems can use ABAP proxies to connect to the Integration Server.
To connect the platform-independent message interfaces, which are stored in the Integration Repository, to the Integration Server, use the ABAP proxy interface.
Please Reward the points if it's helpful...
Regards,
Ramana.

SOAP Receiver Adapter issue

Hello there,
I am using a SOAP receiver adapter. The URL contains the format - https://<XYZ.com>/car/soap/Sync?login=username&pass=password
Now, if I configure the channel by using the "Configure User Authentication", the data is not getting posted at target.
But if I provide the user id / pwd in the URL, it gets posted.
I don't want to use the user id / pwd in the URL but at the sametime, the WS team is not ready to change the format of the URL.
Can I use "Query String" to handle that? If yes, how? If no, what options I have?
Thanks for your precious input and time.
Abhi

Thanks Suraj!
Have you tried this:
url : https://<XYZ.com>/car/soap/Sync
and Configure User Authentication option set
I haven't tried it that way. I am not sure whether that will work, as WS team told me that I am required to put in the whole URL. But thanks for your suggestion, I will give it a try that way.
also try specifying the SOAP action as per your wsdl file
SOAP Action is not Mandatory, so I am not using that.
Thanks,
Abhi

RFC receiver adapter not getting timed out

Hello Everyone,
I have a scenario like this:
Web-Service --> PI -->RFC (using receiver RFC channel)-->Response back to PI from RFC --> response back to Web-Service
This RFC is taking more than 5 minutes to give response back to PI but still I am not getting timeout in PI.
xiadapter.inbound.timeout.default is set to default value 180000.
Is there any other place where I should check for setting timeout like 10 seconds for rfc receiver channel?
Thanks,
Satarupa

Dear Satarupa,
You need to set ICM timeouts at Integration Engine level.
So go to SXMB_ADM and clic on Specific configuration. Edit table and set parameter as follow:
Category = RUNTIME.
Parameters = HTTP_TIMEOUT.
Current Value = [segs] depens your needs.
If you hasn't this parameter in SXMB_ADM set this parameter yourself.
Related link.
http://itsiti.com/increase-sap-icm-http_timeout-runtime
Regards,
Jose

RFC Receiver Adapter Issue

Similar Messages

Maybe you are looking for