RFC receiver config withload balancing ?

Hi Guys,
I have configured the RFC receiver with load balancing. I have given the sap receiver system details and the name of the message server as sapms+SID.
I am getting the following error in PI, which says message server is unknown and i tested in the receiver system and the message server with this name exists.
what could be the problem, any helkp would be appreciated
Thanks,
srini

Hi Srini,
I dont have access to system now.
You dont need to create the logon group.
For logon group ask your BASIS team. Alternatively if you have access to SLD then go to technical system details for the SAP system.
You will find all the logon groups mentioned there.
If you dont see there, then check in the SAP logon pad. Check detail entry for the SAP system. You will find the logon group mentioned there.
For paramter details see SAP help for RFC adapter.
Regards,
Sumit<a href="http://help.sap.com/saphelp_nw70/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm">RFC Receiver Adapter</a>

Similar Messages

Technical System vs RFC adapter config parameters

Hi All
I am working on a scenario with Receiver RFC adapter.While configuring the adaptor ,I had to provide Application Server name and other log in details.
Also the revceiver determination had a business System associated.And in SLD we map the business system with a technical system.
Does the technical system(host name ) has anything to do at runtime?I had to use it to import the RFC though at design time.
Thanks,
Premjit

>
Premjit Mishra wrote:
> Thank you all for the responses.So just to understand a bit more,at run time ,which properties are used ito connect to backend SAP system ie frm Technical System config or from the RFC receiver config property.
AFAIK, RFC receiver adapter config proeperties are used at runtime for connection ..
Technical system details provided are useful in case in case if you are going to use IDOC as the details like
system no and client will be referred from there in your business system associated...
HTH
Rajesh

Error with RFC receiver channel

Hi,
Getting this below error for receiver RFC channel. Can anyone please look into this error urgently.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method com.sap.aii.adapter.rfc.core.config.RfcConfig.getChannel() of a null object returned from com.sap.aii.adapter.rfc.core.client.RfcClientPool.getConfig()

Hi,
Restarted but no result. Getting another error :
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling Z_SD_XI_BAPI_CREATE_VA_SLSORD3 in remote system (RfcClient[CC_RFC_Z_BRONZE_VA_RCVR]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Could not open file /usr/sap/XP3/interfaces/va/br_vaout_20140401_04204.
I do not understand why RFC receiver channel is giving this error.
Can any one please look into it on priority.I need it to get resolved very soon.
Thanks

GL : Carry Forward Receivables/Payables & GL Balances

Hi SAP Guru's
my project now is the confiration level , we config all FI and CO also, now we have to run MONTH END PROCESS, so how to run monthend process and what aspects i have full fill in this stage more ove i have to Carry Forward Receivables/Payables & GL Balances also or wht
please guide me

Hello
Check these steps
Following are the month end and year end operations.
1. Open and Close Period
2. Close period in MM module.
3. GR/IR Clearing
4. Foreign Currency revaluation.
5. Balance Sheet Adjustment
6. Balance Carry forward
7. Asset Fiscal Year Close
8. Asset Fiscal Year Open.
9. Settle Production Order
10 Depreciation Posting.
11 Settle Assets under construction.
12.Post Accruals and Deferrals.
13 Release Standard Cost estimate.
Not all steps may be mandatory, unless implemented.
Reg

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

RFC Receiver Adapter and RFC Destination -- Help

Hi,
I would like to configure the RFC Receiver Adapter for the invokation of a RFC on SAP System (Name: ALPHA) using a RFC destination provided by another system named BETA.
I have set External Server as server type.
My first question is: I have to quote an application server gateway and a gateway service. Is this information related to a service on ALPHA or BETA?
My second question is:
It is also necessary to provide a Programm-ID. The destination on BETA is a R/3 connection and doesn't have a programm id. Where do I get this from?
And my last question is:
Is at all possible to use the RFC destination on BETA?
Any help is really appreciated...
Kind regards,
Heiko

Hi Heiko,
I don't fully understand your need but:)
since both of your systems are SAP systems
why are you trying to use external server?
can't you just call RFC on BETA
and inside this RFC on beta call RFC on ALPHA?
in a sync or async way?
can you tell a little more about your requirement ?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Java.lang.NullPointerException in RFC Receiver Adapter

Hi Experts,
i have configured SQL Sender Adapter and this works fine, i can see the payload. and at the receiver adapter i have configured RFC Receiver Adapter this is throwing NullPointerException as mentioned below.. can someone help me out to fix this issue..
Error Description:
Error     Exception caught by adapter framework: null
Success     MP: Processing local module localejbs/AF_Modules/RequestResponseBean
Error     MP: Exception caught with cause java.lang.NullPointerException
Error     Delivery of the message to the application using connection
                RFC_http://sap.com/xi/XI/System failed, due to:
                com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
Success     The message status set to WAIT.
Thanks,
Srikanth

Hi Srikanth,
This error Occurs because of incomplete configuration in the reciever communication channel.Please check all the required configurations in the reciever communication channel and then activate the channel.
Regards,
Naveen

RFC Receiver Adapter Problem- Sending Blank XML Node

Hi,
I'm using the RFC receiver adapter to call a RFC in R/3 from XI 3.0
In the payload XML one node is blank as I want to pass a blank parameter to the RFC. But in R/3 the blank node is getting converted to #
Can anyone suggest how can I pass a blank node while calling the RFC using RFC receiver adapter in XI 3.0?
Thanks in advance,
Dipankar

Hey
Please check the outbound payload in sxmb_moni and RWB,if the field is blank there,then it means that PI is passing correct value to ECC.its possible that RFC has been coded in such a way that it converts blank spaces to #.Please look at RFC documentation in that case and see if it helps more.
If the outbound payload itself in PI is showing as # instead of blank,then check the message mapping in PI.
Thanx
Aamir

RFC Receiver Adapter (Problem)

Hi All,
I have configured RFC Receiver Adapter : Here i have imported a Z FM for example
"" Z_API_DOCUMENT_CREATE_TEST "" having below import paramaters:
LF_DOCNUMBER TYPE BAPI_DOC_DRAW-DOCUMENTNUMBER
IV_PF_HTTP_DEST TYPE RFCDES-RFCDEST
IV_PF_FTP_DEST TYPE RFCDES-RFCDEST
LF_FILENAME TYPE BAPI_DOC_DRAW-DOCUMENTNUMBER
1) Now i use MM to fill in two parameters : LF_DOCNUMBER , LF_FILENAME
If my FIle is of kind : test55.pdf --> LF_DOCNUMBER = test55
 LF_FILENAME = test55.pdf
For this i have checked in Sender File Adapter "Adapter Specific Message Attributes"
So i write UDF to capture Filename and Filename with extension to fill above shown parameters.
Now i saw target xml after mapping in CC monitor of RWB is as below
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_API_DOCUMENT_CREATE_TEST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<IV_PF_FTP_DEST>SAPFTPA</IV_PF_FTP_DEST>
<IV_PF_HTTP_DEST>SAPHTTPA</IV_PF_HTTP_DEST>
<LF_DOCNUMBER>xierror</LF_DOCNUMBER>
<LF_FILENAME>xierror.doc</LF_FILENAME>
</ns0:Z_API_DOCUMENT_CREATE_TEST>
But LF_FILENAME is getting populated to my Z FM at runtime but LF_DOCNUMBER works fine filling up with value.
But when i run the FM using F8 it works , what could be the problem.
Any advice
regards
Srinivas

Hi,
The problem is with the Data types used for LF_DOCNUMBER.
Make this as Char or Numeric in FM and then try. If its of any packed values then conversion will create the problem
Thanks
Swarup

Dynamic Logon Data in RFC receiver adapter?

Does someone know if and how the logon data (userid) defined in the communication channel for a RFC receiver adapter can be dynamic overwritten? For example using information from the payload?
Scenario: A request for getting HR data is send from a legacy system to XI, mapped to a RFC and routed to R3.
The audit people want to see a real user login into the R3 system to execute the function module and not the technical user defined in the communication channel.

That's exactly what principal propagation is.
You just have to make some (quite a lot, actually) configurations to enable it.
Check these links:
Online documentation: http://help.sap.com/saphelp_nw70/helpdata/en/45/0f16bef65c7249e10000000a155369/frameset.htm
Weblog: /people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
Regards,
Henrique.

How to configure RFC receiver adapter

HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.

Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam

RFC Receiver adapter issue. Pls advice

Hi All,
When XI is sending data back to R/3 system though RFC Receiver Adapter I am getting the below error. Any suggestions
Error Category XI_J2EE_ADAPTER_RFC
Error Code RECEIVER_GENERAL_ERROR
Pls advice.

Rick, your question is very unspecific, so anyone trying to help can only guess very roughly.
So I only have a very rough hint for you, which is the FAQ for RFC adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373330383730%7d

RFC Receiver Adapter Issue

Hi all,
I'm sending a sales order from my ftp server to my R/3 system through RFC. I want this sales order to be created in the R/3 system, For this i'm using BAPI_SALESORDER_CREATEFROMDAT2. Now when i'm configuring my RFC Receiver adapter using the help given on the help.sap.com under "adapters"->"rfc adapter"-> "configuring the rfc adapter", i'm not able to find the parameters mentioned under " Advanced Mode" Heading. In this page, it says that after checking the Advanced mode checkbox, one should get the additional parameters and then we need to set the indicater for the parameter "Commit Control for Individual BAPI Calls". Since i'm not able to find these parameters even after checking the chekbox, i'm stuck. I understand that if i don't get this parameter, my BAPI will not commint and hence the sales order will not be created in R/3.
Kindly suggest.
Regards.
Naveen

Hi Naveen -
>>>In this page, it says that after checking the Advanced mode checkbox, one should get the additional parameters and then we need to set the indicater for the parameter "Commit Control for Individual BAPI Calls". Since i'm not able to find these parameters even after checking the chekbox, i'm stuck.
For this I agree with Sameer. It's probably an adapter metadata issue. As mentioned your XI system needs to be at least on SP14. Also, in the Int. Repository, check SAP BASIS 6.40 SWC SP Level by right clicking on the SAP BASIS 6.40 SWCV, then Display Support Package - this is where the adapter metatdata is delivered. By default, the highest one displayed is wha'ts current on the system. You should see at least SP14 here. Incidentally, this does not confirm the SP level that the rest of the XI components are on, just this SWC.
>>>When i checked in the integration engine, transaction sxmb_moni, i found that the message was processed successfully ! But when i checked in my R/3 system, i didn't find any sales order ! Kindly give me some inputs for this issue.
It probably failed in the adapter engine. Check the adapter engine monitor via the RWB - so once in RWB, goto Message Monitoring, select Adapter Engine (important), then look for your message.
Regards,
Jin
Message was edited by: Jin Shin

RFC receiver channel, message not reflecting in Receiver ECC system

Hi All,
We are using Receiver RFC adapter to call a custom RFC (ASynchronous call). It was working fine, But now after we made a few changes in the mapping. The message is successful in PI, but it is not visible in ECC. When I check in RWB, I think the payload is not going correctly to ECC. I have re-imported the RFC and tried as well. It still does not work.
Kindlhy let me know what to do.
Rgds,
Mithun

Hi Rajhan,
My abaper is doing that, By that time, i just saw the payload in the message display tool(MDT) in RWB...
it looks like some junk data
"QT00010101000120120119201201202012012020121231USD38130511T-F399000110000010001585030512T-F299000110000010001210SP0000001002"
where as in sxmb_moni of PI system the payload after mapping is
"<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:BAPI_QUOTATION_CREATEFROMDATA2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
- <QUOTATION_HEADER_IN>
<DOC_TYPE>QT</DOC_TYPE>
<SALES_ORG>0001</SALES_ORG>
<DISTR_CHAN>01</DISTR_CHAN>
<DIVISION>01</DIVISION>
<PMNTTRMS>0001</PMNTTRMS>
<QT_VALID_F>20120119</QT_VALID_F>
<QT_VALID_T>20120120</QT_VALID_T>
<CT_VALID_F>20120120</CT_VALID_F>
<CT_VALID_T>20121231</CT_VALID_T>
<CURRENCY>USD</CURRENCY>
</QUOTATION_HEADER_IN>
<SALESDOCUMENTIN>381</SALESDOCUMENTIN>
- <QUOTATION_ITEMS_IN>
- <item>
<ITM_NUMBER>30511</ITM_NUMBER>
<MATERIAL>T-F399</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>5850</TARGET_VAL>
</item>
- <item>
<ITM_NUMBER>30512</ITM_NUMBER>
<MATERIAL>T-F299</MATERIAL>
<PLANT>0001</PLANT>
<TARGET_QTY>100</TARGET_QTY>
<SHORT_TEXT />
<MATL_GROUP />
<CUST_GROUP />
<PMNTTRMS>0001</PMNTTRMS>
<PRICE_DATE />
<SHIP_POINT>0001</SHIP_POINT>
<TARGET_VAL>210</TARGET_VAL>
</item>
</QUOTATION_ITEMS_IN>
- <QUOTATION_PARTNERS>
- <item>
<PARTN_ROLE>SP</PARTN_ROLE>
<PARTN_NUMB>0000001002</PARTN_NUMB>
<NAME />
<REGION />
</item>
</QUOTATION_PARTNERS>
</ns1:BAPI_QUOTATION_CREATEFROMDATA2>"
ANY SUGGESTIONS... This is PI 7.1 so its auto commit for the RFC receiver adapter rite. should i tick some option or what else can we do
Rgds,
Mithun

Error in RFC Receiver Adapter: functiontemplate from repository was null

Hi Friends,
i am working on JDBC -> RFC Scenario, JDBC Sender Adapter is working fine, but RFC Receiver Adapter is throwing this error message... can some one help me to solve this issue...
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Thanks
Srikanth

Hi,
I think the logon details what you are giving in Receiver CC may be wrong. Check all those details like Application Server,System Number,User,Password and client.
Thanks.

RFC receiver config withload balancing ?

Similar Messages

Maybe you are looking for