RFC scenario problems

sender RFC scenario without BPM
every thing is fine but the value which i gv is comming as out put but i shuld get the details from SAP...
and in MONI only one msg is comming that is showing Success...
Can anyone Explain me Plz.
THX
john...

Hi,
File-RFC-File is asysnch to sysnch scenario this scenario can be handled in two ways
1) Using BPM:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
2) The weblog which is provided to u in this case u need to do the same configuration which is mentioned in the weblog.
If u have not done the configuration then do it and then try.
Chirag

Similar Messages

Soap- XI- RFC scenario problem

Dear all,
i am configuring a scenario like SOAP->XI->RFC.the third party software send the PM notification message to R3 via XI and the notification is created in R3.now i am facing the problem that the scenario works fine but i can't monitor the message in the Integration server and the message is also not monitored in the adapter engine.
appreciate if anybody can give me some advice.
P.S.
some message can be monitored,but the status is system error.the error message lis like below:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????</SAP
thanks for your attentions.
best regards
xiao feng
SAP china

Xiao
For you to see synchronous messages in Xi, you've got to go
>sxmb_adm
>integration engine configuration
>specific configuration
>add a new entry
category : Runtime
param : logging_sync
value : 1
set this settings and you should be able to see messages in sxmb_moni
How have you configured the RFC adapter? Have you set the client and login/password?

File to RFC scenario - receiver determination problems

Hi ,
Im trying to work out a flat file to RFC scenario, and am facing problems in configuring the receiver determination .
While creating my receiver determination, in the configured receivers, when i click on the F4 help to select service, i do not see the business system that i configured in SLD .
This system i have configured as an WAS ABAP system and provided all relevant data. I can also import objects from this system into IR, so i dont think i have set it up wrongly. I have also created RFC destination .
Is there some setting that has to be made that im missing ? Could somebody point out why im not able to see this system in the list of business services available at receiver configuration time ?
Thanks,
Joe
I also cleared the SLD cache by the way.. that didnt work either .
Message was edited by:
Joe Stein

Thanks a lot for you replies guys , but problems still not solved ;
1. I looked at the blog given and ive done everything pretty much as given . My problem lies in not finding the business system itself in the list of services for the configured receiver. How to implement this has not been shown in the blog.
2. I tried refreshing the cache and checking again, but it still doesnt show me the necessary step.
SOS !
I checked in the inbound system , and found that an RFC wasnt created for the XI system . I created that but i still cant see this system as a business system when i try to create the receiver determination . Do i need to recreate the technical system in the landscape to incorporate this change ?
Any pointers at all ??
Message was edited by:
Joe Stein

** JCO$Exception Problem in RFC to RFC scenario

Hi Friends,
I am doing RFC to RFC scenario. We have two IDES system. One XI system. The scenario is to send the Vendor data from First IDES system (Z_APPLE_VENDOR_SEND) to call the RFC (Z_APPLE_VENDOR_INSERT) in the second RFC system. Sync to Sync Scenario. In this case data is passed from source system and mapped to target RFC soruce Structure. But, not able to login into target system. The following error is occured in SXMB_MONI.
com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=aprins05 SYSNR=01 GWHOST=aprins05 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '172.25.12.23:sapgw01' not reached TIME Fri Oct 17 23:28:55 2008 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2764 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER
Friends, I have tested the following : SLDCHECK, Connection between IDES and XI system. Checked the Gateway of receiver side IDES system thru tcode SMGW. All are working fine. But, still the problem comes.
Kindly help me to solve this issue.
Kind Regards,
Jegathees P.

Hi
Restart the Receiver System once and try again.
Go throgh the following thread
(102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Regards
Sridhar Goli

Problem with Http RFC Scenario

hi all.........
Am doing an HTTP RFC scenario. The scenario is working fine with all messages in IS, IE and AE being successful. But the problem is the RFC response am getting is not what is expected. When i run the RFC directly with the same input value I get the correct response. Can anybody figure out what is the problem. In the channel (adapter monitoring) what comes is :
"RFC_HISTORY
- Error: 2007-01-16 09:47:52 IST: Message processed for interface ZBAPI_NETWORK_CONF_ADD: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.
- Error: 2007-01-15 19:57:21 IST: Message processed for interface ZBAPI_NETWORK_CONF_ADD: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.
- OK: 2007-01-15 19:28:31 IST: Message processed for interface ZBAPI_NETWORK_CONF_ADD "
thanks in advannce

Hi,
>I ve used RFC itself as message type for http by importing it into external definition. So since both structures are same i omitted both MM and IM
Should work fine. Can you look into SXMB_MONI and check what the response is? Make sure that the request message is also as expected.
Regards
Bhavesh

Problem in storing data in BAPI in File to RFC Scenario

Hi everyone,
I m doing File to RFC Scenario.......I completed design and configuration part and actived the Communication Channels.....
Now when I check in Runtime workbench I am getting succefully executed both at outbound and Inbound Channels.......but
data is not updated in BAPI...........
I m getting following error when I check in Component monitoring......
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive
Please help me out.......
Regards,
Sudheer.

Hi
"I took Business Service as Service but not Business System.....Will it effect the scenario???......"
I suggest While dealing with the SAP Systems we should use Business systems.
Pls check the foolowing Threads for the above Query
RFC - Business Service
Re: business service for file to rfc
Regards
Abhijit

Error while calling RFC adapter(FILE-XI-RFC scenario)

Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

File-to-File/RFC scenario with reading filename

Hi,
i have a File-to-File/RFC scenario which causes some problems in desining it correctly. Maybe some of you has an idea how to do this.
Scenario:
- A file is picked up by a File-Adapter. The files are different: pdf, doc, tiff, jpg, txt, ...
- The file must now go through a business process (not necessary the file, but i need the filename in the business process).
- The process has to contact several backend systems (SAP R/3) to collect some data. To achieve this the filename has to be send to this systems.
- The collected data are send via SOAP to a receiver system
- The file itself has to be stored in a directory via File-Adapter.
Here's my problem:
- Is it possible to transport the binary file content within a message which contains other elements (e.g. filename)?
- Is it possible to do graphical mappings with such a payload (only 1 to 1)? Or must i use Java Mappings only?
- How to generate a Message from the sender File Adapter which contains binary file content AND filename? Is this possible with a Module?
- Is it better to create 2 messages with an adapter module? One with the image the other with the filename. Or is it better to split them later in a Mapping?
Thanks in advance,
ms

If all that you need is the file name, use adapter specific settings in the sender file adapter. Then you can access the file name in mapping runtime in UDFs. If you want to have content of the pdf, jpg etc images, i do not think there are ready modules available except for reading pdfs ( you might have to research on this).
For look ups etc with R3 systems, you can use the file name that you got from the adapter and store it in mapping fields.
VJ

Fixed Length of a field in the File-XI-RFC Scenario

Dear All,
I am doing one File-XI-RFC scenario in which user is sending me the file with some delivery nos (VBELN) in it and I am sending those all delivery nos to my RFC in R/3.
Now I want one conition to be put that if any delivery no is of less than 10 characters than that delivery no should not be sent to RFC rest the remaining will be processed to RFC.
I have put one UDF for this whose code is as follows:
int len = a.length();
if (len == 10)
int b=1;
b = (1/len);
return a;
But this code is not working. Please guide me how to solve this problem.
Regards,
N.Jain

HI,
Input is A : Delivery No take all the delivery no in one context.
for(i=0;i<A.length;i++)
int b= Integer.parseInt(A); it will remove all the leading zeros if it has any.
int j=(new Integer(b).toString().length()); count the lenght of the Del no.
if(j>10)
result.addValue(A(i));
else
result.addValue("null"); will not send anything.
Thanks and Regards,
Chirag gohil

XI to RFC Scenario: Runtime error during RFC Call

Hi,
I am testing a XI-to-RFC scenario involving BPM. The RFC works perfectly from SE37; but I get 'ICM_HTTP_TIMEOUT, Error code 402' when I invoke it from XI. On digging through the problem, it appeared that the calling program produced a short dump at the ABAP end. The code is as follows:
module %_rfcdia_start output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diastart.
endmodule.
module %_rfcdia_call output.
 "Do not display screen !
 call 'DY_INVISIBLE_SCREEN'.
 perform remote_function_diacall.
endmodule.
module %_cpic_start.
if sy-xprog(4) = '%RFC'.
 perform remote_function_call using rfctype_external_cpic.
else.
 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
 perform cpic_call using convid.
endif.
endmodule.
form cpic_call using convid type c.
communication send id convid buffer header.
if sy-subrc eq 0.
 perform (sy-xform) in program (sy-xprog).
else.
 message a800.
endif.
endform.
form remote_function_call using value(type).
data rc type i value 0.
do.
********This is the line where error occurs************
 call 'RfcImport' id 'Type' field type.
 if sy-xprog = 'JAVA'.
 system-call plugin
 id 'JAVA' value 'FORW_JAVA'
 id 'RC' value rc.
if there is no rollout on the JAVA side which
rolls both, JAVA and ABAP, we return to the
C-Stack and reach this point
in case there was an rollout, the ABAP-C stack is lost
and we jump direkt to this point
here we trigger the rollout on this Abap side with
the following statement
 system-call plugin
 id 'JAVA' value 'ROLL_OUT'
 id 'RC' value rc.
 else.
 perform (sy-xform) in program (sy-xprog).
 rsyn >scont sysc 00011111 0.
 endif.
Anybody has any idea why it is happening? Is it a network issue? The dump in ST22 says that 'The program "SAPMSYS1" was terminated manually'. How it is possible to manually abort an automatic call?
Awaiting reply.
Regards.

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

Mapping error in file(FCC) to rfc scenario

Hi,
i am trying to implement mapping in file (fcc) to rfc scenario. the source file is getting picked up, but the problem is arising during mapping. i am unable to generate the target structure. i am attaching mapping structure as follows
Source Structure                           Target Structure: RFC
storesales                                     -POSDW-CREATE_TRANSACTIONS_EXT
     recordset                                      it_transaction
       gmd_site_101                                 item
      gmd_site_102
      gmd_site_103
      gmd_site_104
here the recorset is mapped to item, and fields of subnode gmd_site_101 is mapped to fields of subnode item. similarly, for the other subnodes. but when testing with xml file, the target field is not getting generated. in FCC parameters, ignorerecordset name is set to "true".
any help would be very helpful..thanks in advance.
warm regards,
kartz

hi
You can test the data using payload from SXMB_MONI in message mapping test tool so as you can get to know the reason of failure.
It would be better if you paste the error you are getting over there.
Check if you have maintained the namespace in CC or not. it should be same maintained if you have kept namespace in message type.
Also check in FCC parameters you must have used ignoreRecordsetName = true
Regards
Raj

SOAP to RFC scenario prolem

Hello Guru's
 Im trying the basic SOAP TO RFC scenario, in which RFC is SXIDEMO_AIRL_FLIGHT_CHECKAVAIL
and the out bound interface consists of only basic feilds i.e.
REQUEST MESSAGE TYPE : AirlineID
 ConnID
 Fldate
RESPONSE MESSAGE TYPE : Ecnofree
 Bussfree
 Firstfree
and no fault message type.
i created the scenario with out any errors, and i defined webservies in ID with the following URL
http://starxi:50000/XISOAPAdapter/MessageServlet?Channel=:SXI_BS_SOAPRFC_SENDER:SOAP_RFCSENDER
it is according to the following syntax
htt://<xi server>:<J2EE Port>/XISOAPAdapter/MessageServlet?channel=:<sender business system>:communication channel.
But im not able to post SOAP request to the xi server. it is saying following error
"SOAP Request cannot be posted <with url > 403"
403 is the error code.
please can anyone help me in overcoming the above problem. and where iam wrong.
Thanks in advance
arjun

Hi!
Please check once again reg SOAP URL while generating the WSDL.
[http://<HOST name:5<Port>00/XISOAPAdapter/MessageServlet?channel=:<Channel Name>:<Adapter Name>]
[Re: Using SOAP Sender adapter in PI 7.1]
1. Check whether your SOAP URL s correct or not which you are giving in the receiver SOAP adapter
2. Also check you are giving the SOAP action in the receiver SOAP adatper correctly or not.
3. Finally check the SOAP service is activei or not in SAP>BC>XI-->SOAP in ABAP stack
4. Since FIle is only for ASYN comm and while using FILE for sync interface you need to pass module paramters in the Sender File CC
ERROR 403 means::
This error will be comming mostly in the synch scenarios like SOAP to RFC - SOAP and FIle to RFC--FILE
when the target system is down or service is inactive.
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
u2022 HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
u2022 Because of Inactive Services in ICF u2013Go to SICF transaction and activate the services. Refer SAP Note -517484
u2022 Error in RWB/Message Monitoring- because of J2EE roles u2013 Refer SAP Note -796726
u2022 Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. u2013Because of the URL is incorrect or the adapter is not correctly deployed.
Regards::
Amar Srinivas Eli

Error in 'WEBSERVICE TO RFC' SCENARIO

Hi experts,
i am facing a problem in 'WEB SERVICE-RFC' scenario,here we are using soap sender communication cheannel & rfc receiver communication channel.while processing the message from 'portal'(through web service in 'SXI_MONI' we are gettin 1 request & 2 response(error) message.
(in sxi_moni)
1st error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="urn:sap-com:document:sap:rfc:functions">ZBAPI_QUOTATION.Exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
[note: here we are using 'ZBAPI_QUOTATION' IN sap r/3)
2nd response:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 08490A2EBE1A301E9D13373FF379B9BE Software Component 9776FD71CBAE11DF8942F5910A010C19</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Interface mapping Object ID 08490A2EBE1A301E9D13373FF379B9BE Software Component 9776FD71CBAE11DF8942F5910A010C19 does not exist in runtime cache</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
please help me to solve this issue.

For the mapping error >>> Please check whether you have created a response mapping and properly referenced it in your operation mapping
For the RFC exception error >> Please check if you have any new fields added in RFC , re Import the RFC definition in PI
refresh the cache SXI_Cache
Please check below similar threads
file rfc file
RFC_ADAPTER "APPLICATION_ERROR"
Re: Webservice to RFC testing
Hope this helps
Regards
Ninad

JDBC to RFC Scenario large data

Hi,
I have jdbc to rfc scenario. I have no problem with the small size data (about 10 mb ). if resultset is very large ( about 80 -120 mb ) , i received resultset and proceess it but when PI try to send these data to RFC it stucks status Scheduled in sxmb_moni , and in rwb is to be delivered and doesn't send to rfc.
What can i do ?

Since you are using JDBC as sender, I would think you query from the sender and resultset is mapped to RFC for the target system. PI gives optimum performance upto 5 mb message size. YOur message size is pretty big.
Suggestion:
A) Make a minor change and do the query to result less records.
Example: Select Fields from tablename where rownum < 500 and
in update statement set flag = true for the read records so that next time you will not reread those old records again and every time you query only for 500 or 300 or your desired number records and keep the mesg size always constant irrespective of data available.
Hope that helps.

File to RFC scenario using BPM : a synchronous one

Hi All
I am doing File>RFC>File scenario using BPM with help of the blog
RFC Scenario using BPM --Starter Kit
here everything is explained but i am getting error while the processing of BPM part
Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
interface names
filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
(abstract means its an abstract interface)
i have configuered the Integration process as follows
Start>Recieve>synch_send>send>end
step : Recieve
mode : asynch
message:Filetoabstract_MI
step : synch_send
mode : synch
synch interface : synch_send
req message:Filetoabstract_MI
res message : RFCtoabstract_MI
step : send
mode : asynch
message:RFCtoabstract_MI
and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
error is there
1) Integration process ---> file
2) Integration process-->R/3 system

Hi,
Configure the Integration Engine According to this Blog and Trigger the Process again
Configuration of a Central Integration Server
Regards
Seshagiri

RFC scenario problems

Similar Messages

Maybe you are looking for