RFC sender adapter not running

Hi there,
I have following scenario: R3 -(rfc)-> XI -(ftp)-> LEGACY.
In R3, i created a RFC DESTINATION (type T) : with Program_ID & GW options (hostname= R3 hostname & service= sapgwXX where XX means sys number). This RFC currently works!!
In the RFC sender adapter, i used the same program ID and the same hostname and service mentioned above.
If i execute SMGW + GoTo->Logged clients, i can see my program ID there but if i click on it, the register status is WAITING!!!!!
Besides, if i execute the program, no information is transmitted to XI via RFC so i cannot see any error message.
Do i have to do anything else??? Maybe i am missing something...
Could you please help?
best regards,
david

Hi,
In sender RFC :
Configuration takes place using a RFC adapter communication channel and TCode SM59 (Create rfc connections).
- All systems that send an RFC via RFC Adapter require an RFC connection to the respective RFC Adapter(inbound). Metadata is gathered in the same way. Register the program id of the RFC adapter in SM59. The rfc destination must be of type "T" tcp/ip.
- You cannot send IDocs using this rfc connection. you must send IDocs to the RFC destination of the IDOC Adapter.
Also check out that Program id is case sensitive.
in the functiion check out for the COMMIT WORK at the end of LUW.
Regards
Aashish Sinha
PS : reward points if helpful

Similar Messages

RFC Send could not be resolved against SAP system because its metadata could not be obtained...EXCEPTION FU_NOT_FOUND RAISED

Hello,
I am getting the following error in sending IDOC to SAP via WCF-SAP adapter in BizTalk Server 2009. I have the SOAP header in the adapter mentioned below. Also, wondering what is the convension for Action URL? Is it always "http://Microsoft.LobServices.Sap/2007/03/Rfc/"
+ Operation name mentioned in the Orchestration? I would appreciate if anyone could help me resolve this error.
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False".
It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.MetadataException: RFC Send could not be resolved against SAP system because its metadata could not be obtained. ---> Microsoft.Adapters.SAP.RFCException:
Details: ErrorCode=RFC_EXCEPTION. ErrorGroup=RFC_ERROR_APPLICATION_EXCEPTION. SapErrorMessage=EXCEPTION FU_NOT_FOUND RAISED. AdapterErrorMessage=An error occurred while determining the function interface of the RFC Send.
at Microsoft.Adapters.SAP.RFCException.HelperThrow(Int32 retCode, String additionalErrorMessage)
at Microsoft.Adapters.SAP.RfcClientConnection.GetRfcFunctionInterface(String rfcName)
at Microsoft.Adapters.SAP.InternalRfcMetadata..ctor(String originalRfcName, SAPConnection sapConnection)
at Microsoft.Adapters.SAP.SAPMetadataContract.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetOperationDefinition(String operationId, TimeSpan timeout)
at Microsoft.Adapters.SAP.SapFunctionMetadata.ResolveOperationMetadataUsingSdk(String absoluteName, String displayName, String funcName, String operationNamespace, SAPConnection sapConnection, Boolean isTrfc, MetadataLookup metadataLookup, TimeoutHelper
timeoutHelper)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SOAP Header:
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/Send" />
</BtsActionMapping>
Thanks,
Tarun

Hello Morten,
The Send is actually just the name of the operation in Orchestration and it does not exist in SAP. Hence, do I really need to have the SOAP header in WCF-SAP adapter or can I send the IDOC without any SOAP header info? When I try to send without
SOAP header I get the following error. Can you help me resolve this?
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False". It
will be retransmitted after the retry interval specified for this Send Port. Details:"System.ArgumentNullException: Value cannot be null.
Parameter name: key
at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.CreateChannelFactory[TChannel](IBaseMessage bizTalkMessage)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks,
Tarun

Rfc Destination problem in RFC Sender Adapter

Hi experts
I created a Rfc destination type TCP/IP for Rfc Sender adapter.
while creating i passed following parameter:
1) I selected Activation Type option-> Registered Server
2)Given a Program id , same as i given in Rfc sender Adapter config.
3)Gateway option:
   i) Gateway Host:Server IP address where i created Rfc.
ii) Gateway Service:sapgw00
After making these entry, i m unable to receive message at XI end (I am executing Rfc at R/3 site due to Rfc sender)

Hi
please check for the following things.
1. check the RFC destination using the connection test tab in the R/3 system.
2. check whether the program id that u have given is registered or not.
to check the program id go to the transaction SMGW, in the menu select Goto-->LoggedonClients
check for ur program id name in the table.
3. when you configure the RFC sender adapter in XI then you have to give the same program id name that you will give while creating the RFC destination in the R/3 system.
if u still face the problem please reply me back.
Thanks
Rinku

How to send data to RFC Destination(RFC SENDER Adapter)

Hi ,
Scenario: R/3 Backendà RFC Sender Adapterà XIàsome other system.
I have configured the RFC destination (of the type TCP/IP) at R/3 System and have registered the Program ID (specified in the RFC destination) in the XI server and using it in the configuration parameters of the RFC Sender Adapter.
Problem: I do not know how I can send data to the RFC destination. (Should I use a report program/ ABAP Function Module?) Can anybody provide me with a sample code of Report Program/Function module (whichever is required), how to send data to the RFC Destination, so that it may be picked up by my RFC Sender Adapter.
Thanks and Regards,
Siva Maranani

I have one query for you that
I am trying to develop a scenario in SAP XI
SAP R/3 ( RFC function module) sends a synchronous request to the XI and SAP XI will send this request to a third party web application using HTTP receiver adapter.
I am able to send the data/message and it is successfully received at the third party web application.
But I am facing one issue that I am unable to receive any message/data in my RFC module back.i have seen in sxmb_moni that the two messages are displayed in successfuly processed but in SAP R/3 side nothing get happedned
Can you tell me how to use some waiting mechanism in function module to wait for the response from SAP XI.
Regards
Gopesh

Problem in receiving messages via RFC Sender Adapter

Hi,
I have problems in receiving messages from SAP backens systems. Sometimes we are getting all messages sometimes not. Strange.
We are transfering report-results via asynchronous RFC calls. To avoid big message sizes we split them up in max. 1000 rows blocks.
Each RFC call on backend side is completed with COMMIT WORK!
We increased the number of connections in the RFC sender adapter. Then it was better, but the problem still exists! Not so often, but sometimes !?!?!
I hope everybody can help me. Thanks a lot!
best regards,
Hannes

hi,
when you don't receive messages what do you see in SM58
on the r3?
any errors over there?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Errors in RFC sender Adapter

Hi Guys,
I am configuring a RFC sender Adapter in a newly installed system.
I configured the adapter as per the parematers given in SAP help in the exact way and started getting the error
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '*', fromService 'RD1CLNT020', toParty '', toService '', interface 'Z_TEST', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'RD1CLNT020_IN' (channelId 897afca12ee93b86a5bfcd738c037099)
If I go into SXI_CACHE of the PI system I can see the entry.
My gut feeling is that the adapter is not fetching the metadata properely.
Because I switched the metadata loging from the ECC system to PI system and I got the error
JCO.Server could not find server function 'Z_TEST'
I think in the basis setup we have missed something The version on which we are working is the Latest PI 7.1
If somebody has a document at the the config for JCO or a solution for this problem will be much appreciated.
Thanks & Regards
Gagan Kasana

Hi,
there is no magic with this error - it's a common one
1. my blog - RFC sedenr adapter config -
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
then is still does not work:
2.check out OSS note 730870 - FAQ RFC Adapter
"Question 19:
While sending a RFC call to the RFC Adapter I get a error message like "com.sap.aii.af.rfc.afcommunication.RfcAFWException: lookup of binding via CPA-cache failed..." or "com.sap.aii.af.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed...". What is missing?"
and you have it working
please let me know if this helped
Regards,
Michal Krawczyk

What function name to use when calling an XI RFC Sender adapter?

Hello experts, I need some help please...
We are trying to setup an RFC Sender adapter in XI 3.0 for the first time. We followed Michal's <a href="/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step on how to setup the RFC destination in the sender system (ECC 5.0 in our case) and the corresponding communication channel in XI. We can make a connection from ECC to XI via the destination, but we are getting an error in the communication channel monitor stating that the JCO.Server could not find the server function '<i>message interface name</i>'. We have tried to use the message interface name, the message type name and the data type name, but all return the same error. What function name should we be using and how does this name get registered with the JCO server?
Message was edited by:
Matt Austin

hi
Have you registered the pragram id properly in sender system ?
Steps to that
1. first create RFC sender adapter in XI and give any name as program id Give Gateway host n gateway service of appilcation system
2. activate it properly
3. program get regiostered on app system
4. go to application system and create RFC destinationn there give the same program id name
now it should work
regards
Sheetal

Polling with RFC Sender Adapter

Hi,
i am facing a general problem with the rfc sender adapter.
I have to design a scenario where periodically pi has to call a rfc fuba/bapi in R3 and insert the response into a database or create a file.
I looked for some possibilities to impelement this scenario and desided to use ABAP Proxies to transfer the data from R3 to pi.
The problem is that the wish of the department for R3 is not to plan a job to send the files. They want that pi itself call periodically the fuba in R3. I found out that the rfc sender adapter is not able to poll like jdbc oder file adapter.
I thought i could write a litte abap program in pi to be planned in a job or to create a dummy file and poll with the file adapter. But i mean that these solutions are not good. They feel like workarounds and not like a real good solution.
Beside this there is also the problem that we could use the inubit integration system. inubit is able to poll periodically the rfc adapter and is it hard to argument against this.
Are there any good solutions known for the problem?
Does anyone know what the official SAP meaning is for a process like the described above?
many thanks
Michael Eckstein
Edited by: Michael Eckstein on Dec 16, 2011 12:55 PM

hi,
1st: your R3 department is stupid (!).
As your flow is ECC -> PI -> Database. you could easily create a litle extraction program with a selection screen (and a variant which could be easily updated !!) (1) to send data to PI (by using a proxy or an idoc), with a log (at end of your program) and to create easily (!!) a sap job (ecc) based on a country calendar (2).
2nd: If you really need to have "PI -> ECC (proxy)-> PI -> JDBC", you have to use the standard PI scheduler tool, called "Availibility time planning" (ATP). see this option in CC monitoring (RWB). you could trigger your sender CC (proxy)
And if you want, another possibility could be to trigger your sender CC by an external tools (to buy), or by creating an abap program....
(1) how you will pass the value to extract data with your solution (my 2nd point).
(2) in ATP of PI, the scheduling will be NOT based on a country calendar (holiday, religious/bank holiday), but just daily, weekly, inside a range, etc...
Mickael
Edited by: Mickael Huchet on Dec 16, 2011 12:53 PM

RFC sender adapter doesn't reconnect after a R/3 down

Hi everybody,
We are in PI 7.0.
The RFC sender adapter doesn't reconnect automaticaly after a shutdown/restart of the R/3 system.
Theoritically, the system should retry after 2, 4 .... 3600 seconds but it doesn't do.
Is there anybody who have an idea ?
Thank in advance.
Best regards.
Eric.

After the restart of R/3 system , when I look in SM59, I receive the answer that the program is not registered ( RFC sender adapter) .
As I told in my previous post, since the RFC adapter has lost the connection, the RFC destination is not registered. Just try to stop/start the channel and reactivate. the destination should work fine then.
I read in documentation that is done automatically but that is not the case.
Thats right. but it doesn't happen usually. probably u can ask SAP to explan this with an OSS

Call rfc sender adapter from non-sap systems

Hi,
is ist possible to connect to an rfc sender adapter from non-sap systems? I want to use the the RFC-Connector from http://rfcconnector.com, but in the client connect options there is no way to specify the program id.
Best regards,
Daniel

hi,
you don't need to use RFC type T (with program ID) - you can use whole connection string - just like in the example:
http://www.rfcconnector.com/documentation/examples/client/#functioncall
so just specify: host system number etc.
it should work like that - but let me know as I don't know this RFC connector
Regards,
Michal Krawczyk

RFC Sender Adapter in XI..Possible??

Hi All,
I am trying to send data from XI using RFC Sender Adapter.
Have done all the configuration, ie created a tcp/ip destination in SM59 and then in the RFC adapter mentioned the program name.
In Adapter monitoring i can see the adapter working fine.
When i execute the Function Mouldule i get the following error in SM58.
parameter JCO.Request was <null> (server: RfcServer[CC_RFC_TX1_OUT]1)
Can anyone please lemme know if we can send data from XI box using RFC sender adapter.
Regards,
Sumit

Sumit,
Technically specking this should be possible.. I Havent tried it though..
So, you are using a Sender RFC to send data from XI to XI itself uh?
I have tried configuring a Receievr RFC adapter pointing to XI and it has worked fine.
Also, take a look at these blogs if your config is correct,
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards,
Bhavesh

Doubts in RFC sender Adapter

Hi XI Gurus,
Can any body plz explain me about the parameters used in RFC Sender Adapter (like RFC Server Parameters: Program ID, Gateway, etc..)
Thanks in advance.

Hi,
Refer this link there they have given everything clearly
http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/frameset.htm
Application Server (Gateway) : host name of the sender system.
Application Server Service (Gateway): Gateway service of the sender system. This can be the numeric description of the service port in the sender system or the alphanumeric equivalent (for example, sapgwXX, where XX is the system number of the sender system).
Program ID: Program ID of the registered server program. The selected program ID must uniquely describe the RFC sender channel in the configured gateway (Application Server (Gateway) and Application Server Service (Gateway) parameters).
For Program id: In sender R/3 system Tcode SM59
1.Create RFC Destination with connection type: T
2.Choose Registered server program
3.Give program id(you can give any name here, the program id you give in sender RFC adapter and here should be same )
4. Give Gateway host and Gateway value.
You can also check this blog
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards,
Sakthi

RFC Sender Adapter - tRFC

Hi -
Does the XI RFC Sender Adapter (R/3 -> XI) support tRFC?
For example, in R/3 I'll be calling the RFC Async using 'IN BACKGROUND TASK'.
I believe it does based on the information in the following thread:
Problem with Scenario tRFC -> XI -> File
Can someone please confirm that they have this working.
Thanks,
Jesse

Hi Jesse,
Also check this Blog
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
In R/3, when u create connections of type Logical & TCP
The gateway host/ service have to be your R/3's,
and the same to be given in the RFC sender adapter
Regards
Vishnu

JDBC Sender Adapter - NOT FETCHING RECORDS...

Hello Experts,
I know this was answered in a separate thread (JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED).
However, my question is, Is there a way that we can be notified if a channel has stopped fetching records?
or is there a reporting tool that can be used to check/monitor if a channel is not processing any messages?
Thanks & Kregards,
allar

Hi Sreedhar,
Thanks for your reply.
These case is not being captured by our alert configuration because its not throwing any error.
in the communication channel monitoring, we see only something like this..:
3/16/09 8:25:19 PM Processing started
3/16/09 8:34:20 PM Processing started
3/16/09 8:33:55 PM Processing started
3/16/09 8:32:54 PM Processing started
but no error is being displayed nor sent.
Also, there was a case that the channel just stopped fetching, even though everything is active.
example log:
3/12/09 8:32:54 PM Processing started
We're looking for ways on how we can trap these scenarios as early as possible, get us notified and perform adapter-lock release when needed.
Regards,
allar

RFC Sender Adapter - Java Mapping

Hello
i want to make a call from R3 -> XI via the RFC Sender Adapter, process the R3 Call inside a Java Mapping and return to results to R3 (synchronous RFC call)
how do i setup Interface and Message mappings and the corresponding sender and receiver agreements?
regards franz

i've got some java services from a sap business connector application
these java services where called from R3 -> SAP/BC, BC did some proecessing and filled return parameters (synchronous RFC call from R3 -> SAP BC)
I now have to convert these SAP BC Services to XI Services because SAP BC won't be supported any more
any ideas how to do do this?

RFC sender adapter not running

Similar Messages

Maybe you are looking for