RFC_SENDER_XI : RFC Dest Error

Hi All
I am configuring the RFC Destination on the ECC6 of typer TCP/IP to communicate RFC to XI, when i create the RFC destination RFC_SENDER_XI of type TCP/IP i am getting error
Error Details     SAP gateway connection failed. Is SAP gateway started?                    / CPIC
Error Details     ERROR: SAP gateway connection failed. Is SAP gateway started?
Error Details     LOCATION: SAP-Server eccserv_EC6_01 on host eccserv (wp 0)
I have configured the RFC Sender Adapter and i am using the same PID of RFC Sender in my RFC Dest, the RFC destnation is throwing error when i mention the host name of ECC in Gateway host.
Any clue where is the problem, how should i activate the gateway host on ECC, is there any such thing to activate gateway host also when i run TCode SMGW on ECC i am not able to see any active connectiions there.

Now i am getting the error on the RFC_SNDR Adapter
Error Details:
Error: 2007-08-07 11:02:26 GMT+05:30: com.sap.aii.af.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'ECC_SERVER', toParty '', toService '', interface 'ZMK_TEST_RFC', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_RFC_SNDR' (channelId 389e1dc5421a32b5a336160fb15d71eb)
I have done the cache refersh still getting same error

Similar Messages

RFC connection error for PS_ACCESS_1 and PS_ACCESS_2

dear all,
i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving 'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
regards,
vicky.

HI,
please check the RFC Trace File at SM59 -> RFC -> Show trace file.
For better tracing delete the Trace File first and recheck the RFC Dest.
Regards,
Gordon

Regd. Creation of Port and RFC dest in PI

Hi Experts,
I have two scenarios 1. file to IDOC and 2. IDOC to file.
for first , i need to connect to ECC for posting IDOC. in sap side they have created port ,partner profile etc.
in PI sides i created an RFC destination(sm59) ,given generic name, i have created port(idx1) and mentioned the partener num say(SAP123) ant type (LS). Loaded the meta data in idx2. i am able to post IDOC in sap.
for the second case,i am supposed to receive idoc from sap.
do i need to create another port and rfc destination ? or simply adding the metadata in the prev created port will help.
Actually i tried creating another RFC dest and port and was trying to assign same partner num (SAP123) and type (LS)
while loading the metadata i get an error saying 'basic type of the IDOC is unknown'.
from SAP side the IDOC status is green , saying idoc is dispatched to the target port.But in Trn. SE58, there is error show.
Is this something wrong in PI or SAP ?
Please help me with the steps to be followed with suggested naming conventions if any.
Best regards,
Srinivas

Hi,
Port type shouldbe SAP SYSID ...it is important that you create the port with this naming convention as the name is very important to be followed...
Try to create the port name with the above mentioned..and give a try...
Also post the error generated in the SM58 ...
HTH
Rajesh

Remote comparison RFC Dest

Hi,
my system is solution manager 7.1 the last stack
ST-PI 05
when i use in CDMC i get the results i want to try - remote comparison,
when i click on the remote comparison i need to choose RFC dest,
i get a list of rfc that i dont understand from where the solution manager gets it,
also when i try to choose RFC i get the Error
"RFC destination different from destination system"
I find the note 1636163 but it's not compatible my system my ST-PI
Best regards
Naor Shalom
Edited by: Naor Shalom on Feb 2, 2012 9:27 AM

Gyula,
I believe it is all controlled in SM59 where you can set the login id and password as trusted. Whe you call this function module remotely from your program, the logical destination system set in SM59 probably not set as trusted.

RFC Dest. Parameters for ALIEN Device Integration?

hi,
    I am trying to Integrate Alien Device to SAP AII.
In RFC dest. ALE_OUT
   HOST: ip address
   service/port : 23
   path : /
but I am getting an " ICM_HTTP_CONNECTION_FAILED" error.
thanks,
arul.

hi,
    I am trying to Integrate Alien Device to SAP AII.
In RFC dest. ALE_OUT
   HOST: ip address
   service/port : 23
   path : /
but I am getting an " ICM_HTTP_CONNECTION_FAILED" error.
thanks,
arul.

RFC dest . parameter Problem

Hi Friends,
I am getting a problem when i restore the Source system.
No RFC dest.parameters maintained for the
Warehouse in source system BQACLNT100
When i am asking my basis team to checck for the connection in the source system they are telling that connection is working fine
Please help me to solve this problem
Regards
Raju

hi Raju,
it seems authorization problem,
oss note 126066, old one but may relevant, it's said ALE user (ALEREMOTE) is missing an authorization in the source system - BQACLNT100. what's your r/3 version.
you may have higher version, but still try to check authorization area.
Cause and prerequisites
The error message can have two causes:
1. The user ALEREMOTE is missing an authorization in the source system
    (only for systems as of Release 4.0B)
2. The field "Application server" carries out a conversion to upper
    case in the dialog "automatic connect" (only for source systems on a
    UNIX operating system)
Solution
Solution for 1:
Join the profile S_BI-WX_RFC in the source system to the authorization:
Object:        S_ADMI_FCD
Authorization: S_WF_RFCDEST
Value:         NADM

RFC sender error

Hi,
I created RFC at SAP . RFC Sender.
SM59 registered progam ID
i am suing same program id and gateway server, host in XI
when i execute the FM from se37 using the RFC DEST it is showing the error
"JCO.Server could not find server function 'Z_BANK_RECONCILIATION'"
same program id has been defined in Visual admin JCO Serivce.
Could u locate where is the errore
jeff

hi Jeff,
>>>>Same program id i registered in JCORFC server in Visual admin.
what for ??
why didn't you follow my blog that I gave you in
which I show RFC configuration ? I don't mention anything
about Visual admin in it...
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 -> Done2. Create new destination of type T (TCP/IP) -> Done
3. Make sure you select Registered Server Program option before writing your program ID -> Done
4. Write you program ID (remember it's case-sensitive) -> gave the SID name
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) -> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.

RFC Connection Error during Web AS ABAP Database Instance

I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.

try moving all your install disk onto local file system then rerun the install. That might work....

(Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

Hi,
I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
Please advice.
Regards,
Hitesh

Hi Hitestwar,
Try these notes as well
1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
Or try to set logs on the server and check what is happening.
Thanks,
Vivek

RFC destination error while importing a client request

Dear Experts,
We are trying to import a Client Export from our Prd system to Development System and we are unable to import the request as it pops up a RFC destination error.
We have checked the RFC in the Dev QAS and PRD related to TMSADM and all of them are working fine
FYI, We are able to release the transports from the development system and it can be moved till qas and prd . So the TMS Configuration is also good.
The data file and co file in the backend of development is the same size as that of the Prd system.
I am really stuck . Kindly suggest a solution . Please find the screenshots while importing
Regards,
Suratharajan .S

Hi Suratha,
Goto STMS->system overview and select the Communication tab.
Maintained the Instance number of the ASD system.
Once you maintained the instance number , you will able to see it in the RFC ASD.DOMAIN_ASD.
Also distribute the configuration after entering the instance number.
With Regards
Ashutosh Chaturvedi

RFC_SENDER_XI : RFC Dest Error

Similar Messages

Maybe you are looking for