RFC status in R3 system "Service: SAP_ECC5 not found in CPACache"
Hi experts,
When the above error is noted in R3 . Itested INTEGRATION_DIRECTORY_HMI in Xi server there the following errors came.
Response from Webserver contains Cookies
accept?
I gave response no
For that Response:
Response_line : HTTP/1.1 500 internal server error
connection : Close
server : SAP J2EE engine /7.0
pragma : no-cache
Regards,
Venkat
Hi,
How to resolve this error.
Can any of the settings given below are cause for the error?
HTTP version is set to HTTP/1.0
Compression is set to inactive
Compressed response is set to yes
Accep cookies is set to Yes.
I also would like to know whether response to accept cookies be geves as 'yes' during connection test?
Your response is highly helpful
Regards
Venkat
Similar Messages
-
RfcAFWException: Service: BS_ECC not found in CPACache
Hi everybody,
I have the follow error:
- Error: 2007-07-31 08:53:39 GMT-04:00:
com.sap.aii.rfc.afcommunication.RfcAFWException: Service: BS_ECC not found in CPACache
Does anybody know what is happening?
Thanks,
Renato.check the below threads
Re: Problem with Http RFC Scenario
RFC adapter as sender
Regards
JJS -
Business system not found in CPACache
Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
CPAcache refreshed for dela as well as full
Adapter specific identifiers are fine
SLD cache cleared in IR ID
Business System name is found in CPAcache
error repeated
Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
Still error is repeating.
Can anybody give a solution for this problem please?
Regards,
VenkatHi Venkat,
The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
Regards
Pothana -
SQL MP - System Center Management Health Service Credentials Not Found Alert Message
Hi Dears,
I have read so many open cases, but I could not find solution to my situation...
Error: System Center Management Health Service Credentials Not Found Alert Message
Desc are 1 of those 2:
An account specified in the Run As profile "Microsoft.SQLServer.SQLDiscoveryAccount" cannot be resolved.
An account specified in the Run As profile "Microsoft.SQLServer.SQLDefaultAccount" cannot be resolved.
Okay, I am fine, I verify the RunAs account configuration and yes this is the problem... I was able to solve it for those SQL running servicec account using domain user account, I created the run as account, and assoistte it with SQL profiles,
and it is fine....
BUT, what about my 8 SQL Servers running SQL Service Account under System and Network accounts,
so how Can I add this coz I cannot target all objects,so what shall I target (Object Health Service or WHAT)?
Please I need it step by step coz I am not able to handle this issue....
Thank you GuysHi,
If you have not distributed the Run As Account to a system, but we discovered SQL on it, you will see the error message.
This condition may have occurred because the account is not configured to be distributed to this computer. To resolve this problem, please distribute the account to this computer if appropriate. You can refer to the following blog to distribute the Run As
credential.
Niki Han
TechNet Community Support -
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm
PS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Analy...viceApplication:
NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
+ FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it worksPS C:\Users\_svc_admin> New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseServerName $DatabaseServer -DatabaseName $DatabaseName -AddtoDefaultProxyGroup:$true
New-PowerPivotServiceApplication : The PowerPivot System Service does not exist in the farm. At line:1 char:1
+ New-PowerPivotServiceApplication -ServiceApplicationName $AppPoolName -DatabaseS ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Analy...viceApplication:
NewPowerPivotServiceApplication) [New-PowerPivotServiceApplication], Gemin
iException
+ FullyQualifiedErrorId : Microsoft.AnalysisServices.SPAddin.PowerShell.Ne
wPowerPivotServiceApplication
Installation created these files on (14\TEMPLATE\SQL) different folder than
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\SQL
PowerPivotDbLogic.sql
PowerPivotDbSchema.sql
I copied the files to the correct location and it works -
Hi,
I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
First of all, after computer restart, I don't think postfix starts automatically
Running 'sudo postfix start' gives me:
postfix/postfix-script: starting the Postfix mail system
Looking at '/var/log/mail.log' I find:
Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
Running 'sudo postfix check' does not give me any errors
Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
192.168.1.5
Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
Running 'ps aux|grep postfix' gives
AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
_postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
_postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
Running 'postconf inet_interfaces' at first gave me
inet_interfaces = localhost
which I changed to All in '/etc/postfix/main.cf'
I looked at http://www.postfix-book.com/debugging.html
Running 'telnet localhost 25' gives me
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying fe80::1...
telnet: connect to address fe80::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 AMs-MBP.local ESMTP Postfix
quit
221 2.0.0 Bye
Connection closed by foreign host.
But running 'telnet 10.1.2.233 25' gives me
Trying 10.1.2.233...
telnet: connect to address 10.1.2.233: Operation timed out
telnet: Unable to connect to remote host
Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
PING 134.169.9.107 (134.169.9.107): 56 data bytes
^C
o
+ 134.169.9.107 ping statistics ---
28 packets transmitted, 0 packets received, 100% packet loss
I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
Please, does anyone have an idea of how to fix this?
TIA,
ElleDynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server. -
Visual Composer services are not found
Hi there,
I have installed SAP NetWeaver 2004S SR 1 according to the installation guide which was included in the installation files. After installation of the system (excluding MaxDB Database Manager and SQL Studio) I started the server. After that I installed Adobe SVG Viewer and tried to start Visual Composer by calling http://localhost:50100/VC. When I do so, I get two error messages stating <b>Server Error: Visual Composer services are not found</b> and <b>This product requires MSXML Parser v4.0</b>. What am I doing wrong?
Thanks a lot for any help!
Regards,
MarcHi Mario,
mh...strange.
I used the VC on our old server with my notebook without a problem (great tool!).
Now we have a new server with a new NW 04s SP10 (very fresh installed ) and there I get the "Server Error: Visual Composer services are not found" and "This product requires MSXML Parser v4.0" errors.
Unfortunately I cannot test it on the old server, because it was a interim system.
Regards,
Christian -
Shared services database not found in the specified database
Hi Guys,
In Hyperion EPM System confirurator,i gave all the fields and click next button it show error message "Shared services database not found in the specified database"Hi ,
1. Pls confirm me one thing. Did you re -install version 11.
2. Re intstallation of version 11 has lot of issues ( atleast 11.1.1.1).
Sandeep Reddy Enti
HCC
http://hyperionconsutlancy.com/ -
Hi,
I try to develop a Photoshop CC extension panel with the Extension Builder V3. But when I try to run the panel I get an error message saying that the CEP Service is not found. I check the file system and cannot find it either. Any suggestions?
Thanks,
SvenI found the answer: Adobe Extension Builder and Creative Cloud 2014
-
System Writer is not found when running SystemState
I ran DPM backups and got errors when i was tring to run system state, realised i get the error "System Writer is not found"in windows backup. I checked VSS admin list writers and system writer was not stated in output.
I there after ran to google and tried to follow https://support.microsoft.com/en-us/kb/2009272?wa=wsignin1.0 however that didnot work because my event ID registered error ID 8193 which i as well googled and ended up on https://social.technet.microsoft.com/Forums/windowsserver/en-US/7b52f7c1-a783-409e-9af3-da64567676df/vss-error-8193?forum=winserverfiles
But i didnot have any profilesthat had BAK extension or id in them. So now i am still stuck with tihis problem. Any help highly appreciated.
JHL Net SolutionsHello,
The HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VSS\VssAccessControl. NT
AUTHORITY\NETWORK SERVICE already has the value of (REG_DWORD) 1.
Here is the the event id 8193
Volume Shadow Copy Service error: Unexpected error calling routine CreateVssExamineWriterMetadata. hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
Operation:
Writer Exposing its Metadata
Context:
Execution Context: Requestor
Writer Instance ID: {F9E9B938-768C-43E4-9107-6B36ACAB40D2}
Writer Class Id: {E8132975-6F93-4464-A53E-1050253AE220}
Writer Name: System Writer
System
- Provider
[ Name] VSS
- EventID 8193
[ Qualifiers] 0
Level 2
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2015-04-27T15:19:37.000000000Z
EventRecordID 16060
Channel Application
Computer mycomputername
Security
- EventData
CreateVssExamineWriterMetadata
0x80042302, A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information.
Operation: Writer Exposing its Metadata Context: Execution Context: Requestor Writer Instance ID: {F9E9B938-768C-43E4-9107-6B36ACAB40D2} Writer Class Id: {E8132975-6F93-4464-A53E-1050253AE220} Writer Name: System Writer
2D20436F64653A2042554543584D4C4330303030393037302D2043616C6C3A2042554543584D4C4330303030393033312D205049443A202030303030333838382D205449443A202030303030333635322D20434D443A202022433A5C57696E646F77735C73797374656D33325C7762656E67696E652E657865222020202020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820
Binary data:
In Words
0000: 6F43202D 203A6564 43455542 434C4D58
0010: 30303030 30373039 6143202D 203A6C6C
0020: 43455542 434C4D58 30303030 31333039
0030: 4950202D 20203A44 30303030 38383833
0040: 4954202D 20203A44 30303030 32353633
0050: 4D43202D 20203A44 5C3A4322 646E6957
0060: 5C73776F 74737973 32336D65 6562775C
0070: 6E69676E 78652E65 20202265 20202020
0080: 7355202D 203A7265 656D614E 544E203A
0090: 54554120 49524F48 535C5954 45545359
00a0: 53202C4D 533A4449 352D312D 2038312D
In Bytes
0000: 2D 20 43 6F 64 65 3A 20 - Code:
0008: 42 55 45 43 58 4D 4C 43 BUECXMLC
0010: 30 30 30 30 39 30 37 30 00009070
0018: 2D 20 43 61 6C 6C 3A 20 - Call:
0020: 42 55 45 43 58 4D 4C 43 BUECXMLC
0028: 30 30 30 30 39 30 33 31 00009031
0030: 2D 20 50 49 44 3A 20 20 - PID:
0038: 30 30 30 30 33 38 38 38 00003888
0040: 2D 20 54 49 44 3A 20 20 - TID:
0048: 30 30 30 30 33 36 35 32 00003652
0050: 2D 20 43 4D 44 3A 20 20 - CMD:
0058: 22 43 3A 5C 57 69 6E 64 "C:\Wind
0060: 6F 77 73 5C 73 79 73 74 ows\syst
0068: 65 6D 33 32 5C 77 62 65 em32\wbe
0070: 6E 67 69 6E 65 2E 65 78 ngine.ex
0078: 65 22 20 20 20 20 20 20 e"
0080: 2D 20 55 73 65 72 3A 20 - User:
0088: 4E 61 6D 65 3A 20 4E 54 Name: NT
0090: 20 41 55 54 48 4F 52 49 AUTHORI
0098: 54 59 5C 53 59 53 54 45 TY\SYSTE
00a0: 4D 2C 20 53 49 44 3A 53 M, SID:S
00a8: 2D 31 2D 35 2D 31 38 20 -1-5-18
JHL Net Solutions -
Service ticket not found in the subject
Hi,
I've got simple authorisation working from Java to an Linux MIT KDC. I've also got tickets via kinit from the kdc on the Linux server. I'm trying to use JAAS sample code:
Does anyone know how I can get this to work?
MY login.conf file is
GSSClient{
com.sun.security.auth.module.Krb5LoginModule required
useTicketCache="true";
Rserver{
com.sun.security.auth.module.Krb5LoginModule required
storeKey=true
useKeyTab=true
doNotPrompt=true
keyTab="/etc/harsh.keytab"
principal="Rserver/kdc.mahindrabt.com";
and the error which i am getting is i have enable debug
ratnesh
Name of the [email protected]
before peerlc.login()
KinitOptions cache name is /tmp/krb5cc_0
DEBUG <CCacheInputStream> client principal is [email protected]
DEBUG <CCacheInputStream> server principal is krbtgt/[email protected]
DEBUG <CCacheInputStream> key type: 16
DEBUG <CCacheInputStream> auth time: Thu Dec 18 15:20:02 IST 2003
DEBUG <CCacheInputStream> start time: Thu Dec 18 15:20:02 IST 2003
DEBUG <CCacheInputStream> end time: Fri Dec 19 01:20:02 IST 2003
DEBUG <CCacheInputStream> renew_till time: Thu Jan 01 05:30:00 IST 1970
CCacheInputStream: readFlags() INITIAL;Host address is 10.3.1.110
DEBUG <CCacheInputStream>
DEBUG <CCacheInputStream> client principal is [email protected]
DEBUG <CCacheInputStream> server principal is host/[email protected]
DEBUG <CCacheInputStream> key type: 1
DEBUG <CCacheInputStream> auth time: Thu Dec 18 15:20:02 IST 2003
DEBUG <CCacheInputStream> start time: Thu Dec 18 16:17:13 IST 2003
DEBUG <CCacheInputStream> end time: Fri Dec 19 01:20:02 IST 2003
DEBUG <CCacheInputStream> renew_till time: Thu Jan 01 05:30:00 IST 1970
CCacheInputStream: readFlags()Host address is 10.3.1.110
DEBUG <CCacheInputStream>after peerlc.login()
prior to subject.doAs()
value of s isSubject:
Principal: [email protected]
Private Credential: Ticket (hex) =
0000: 61 82 01 06 30 82 01 02 A0 03 02 01 05 A1 10 1B a...0...........
0010: 0E 4D 41 48 49 4E 44 52 41 42 54 2E 43 4F 4D A2 .MAHINDRABT.COM.
0020: 23 30 21 A0 03 02 01 00 A1 1A 30 18 1B 06 6B 72 #0!.......0...kr
0030: 62 74 67 74 1B 0E 4D 41 48 49 4E 44 52 41 42 54 btgt..MAHINDRABT
0040: 2E 43 4F 4D A3 81 C3 30 81 C0 A0 03 02 01 01 A1 .COM...0........
0050: 03 02 01 01 A2 81 B3 04 81 B0 CB 01 79 E9 43 1A ............y.C.
0060: AE 64 90 28 83 D6 79 82 6A 4C 26 08 A9 C2 59 E7 .d.(..y.jL&...Y.
0070: 21 2E 4C 41 81 B5 01 75 9A 24 87 C0 30 3B F9 A7 !.LA...u.$..0;..
0080: 6B 4E 5D 29 5D A0 9F 91 55 92 D6 FD E4 4B 0A 84 kN])]...U....K..
0090: 06 5B 07 14 00 7E 96 C6 2F 15 4B 34 9F D6 0D E2 .[....../.K4....
00A0: 89 48 B3 78 63 B8 A0 B0 81 14 28 A8 3F 29 A5 D7 .H.xc.....(.?)..
00B0: 64 D5 40 B7 19 A8 6D FC F2 82 86 02 C5 13 32 AA [email protected].
00C0: A8 42 A5 8B 3D 52 DB 83 C7 1F 19 31 3E 6C 87 B0 .B..=R.....1>l..
00D0: BD A5 6A 26 8E DB 2C EA F5 06 2F 90 0A DA 77 58 ..j&..,.../...wX
00E0: CC 0A 67 27 4E 51 7D 74 50 08 79 E4 06 EA C9 30 ..g'NQ.tP.y....0
00F0: E4 F8 40 51 F5 D9 FA C1 AF D9 D3 2E 4A 32 59 CC [email protected].
0100: 10 1A 0F AA 7D 98 30 9B A7 26
Client Principal = [email protected]
Server Principal = krbtgt/[email protected]
Session Key = EncryptionKey: keyType=16 keyBytes (hex dump)=
0000: 9B B5 0E FB 8F 49 64 8F 32 31 10 AE 6E A8 BA 80 .....Id.21..n...
0010: C4 16 45 4A 92 34 A1 02
Forwardable Ticket false
Forwarded Ticket false
Proxiable Ticket false
Proxy Ticket false
Postdated Ticket false
Renewable Ticket false
Initial Ticket false
Auth Time = Thu Dec 18 15:20:02 IST 2003
Start Time = Thu Dec 18 15:20:02 IST 2003
End Time = Fri Dec 19 01:20:02 IST 2003
Renew Till = Null
Client Addresses clientAddresses[0] = /10.3.1.110
GSSClient... Getting client credentialsFound ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Dec 19 01:20:02 IST 2003
GSSClient... GSSManager creating security context
GSSClient... Sending token to server over secure contextEntered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Dec 19 01:20:02 IST 2003
Service ticket not found in the subject
Credentials acquireServiceCreds: same realm
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumTypeKrbException: KDC has no support for encryption type (14)
at sun.security.krb5.internal.crypto.p.a(DashoA6275:58)
at sun.security.krb5.EncryptedData.<init>(DashoA6275:84)
at sun.security.krb5.KrbApReq.b(DashoA6275:438)
at sun.security.krb5.KrbApReq.a(DashoA6275:211)
at sun.security.krb5.KrbApReq.<init>(DashoA6275:172)
at sun.security.krb5.KrbTgsReq.a(DashoA6275:319)
at sun.security.krb5.KrbTgsReq.<init>(DashoA6275:166)
at sun.security.krb5.KrbTgsReq.<init>(DashoA6275:87)
at sun.security.krb5.internal.az.a(DashoA6275:289)
at sun.security.krb5.internal.az.a(DashoA6275:106)
at sun.security.krb5.Credentials.acquireServiceCreds(DashoA6275:490)
at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:580)
at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)
at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)
at GSSClient.run(GSSClient.java:184)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:320)
at GSSClient.login(GSSClient.java:124)
at GSSClient.main(GSSClient.java:63)
GSSClient... GSS Exception No valid credentials provided (Mechanism level: KDC has no support for encryption type (14))after to getting context
Client authentication deined..
If i dosnt do kinit it work fine
Cheers
Harsh AhujaI think you do have a ticket in your subject, problem is that they ar'nt readable by suns core librarys. Sun seems to lack suport for des3-cbc-sha1. Try creating tickets with des-cbc-crc.
wikm@empusa:~$ klist -a
Credentials cache: FILE:/tmp/krb5cc_1001
Principal: [email protected]
Cache version: 4
Server: krbtgt/[email protected]
Ticket etype: des-cbc-crc, kvno 1
Auth time: Dec 22 15:31:03 2003
End time: Dec 23 01:31:03 2003
Ticket flags: initial
Addresses: IPv4:130.237.95.15
Server: [email protected]
Ticket etype: des-cbc-crc, kvno 2
Auth time: Dec 22 15:31:03 2003
End time: Dec 23 01:31:03 2003
Ticket flags:
Addresses: IPv4:130.237.95.15
/ Mikael -
The requested feature DSC-Service is not found on the target machine.
Hi,
I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
I then trid to execute that code on the localhost,
it came up with this error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
message: The requested feature DSC-Service is not found on the target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : localhost
Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
Thanks a lot.
P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
not found.
At line:1 char:1
+ Add-WindowsFeature
+ ~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
+ FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
andHi Anna,
I'm in the same situation as Nathys.
I tried everything you indicated. However, it still does not work. I got the same error:
PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
target machine.
+ CategoryInfo : InvalidOperation: (:) [], CimException
+ FullyQualifiedErrorId : ProviderOperationExecutionFailure
+ PSComputerName : devops-01
The SendConfigurationApply function did not succeed.
+ CategoryInfo : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
+ FullyQualifiedErrorId : MI RESULT 1
+ PSComputerName : devops-01
PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Enabling feature(s)
[==========================100.0%==========================]
The operation completed successfully.
I have restarted the computer, but it still does not work. -
Service URL not found:session
Hi,
I had written a custom authentication module according to the sample given with SunONE doc. But, when I try to login to the portal server, it is throwing the following exception in /opt/SUNWam/debug/amSSOProvider file.
how to solve this issue:
I am using SunONE portal server 6.1
05/13/2004 07:22:54:260 PM GMT+05:30: Thread[Thread-157,5,main]
could not create SSOToken from HttpRequest
com.iplanet.dpro.session.SessionException: Service URL not found:session
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:336)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:316)
at com.iplanet.dpro.session.Session.getSession(Session.java:233)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:56)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:226)
at com.sun.portal.desktop.context.DSAMESessionAppContext.getSSOToken(DSAMESessionAppContext.java:67)
at com.sun.portal.desktop.context.DSAMESessionAppContext.getSessionID(DSAMESessionAppContext.java:99)
at com.sun.portal.desktop.context.PSDesktopAppContext.getSessionID(PSDesktopAppContext.java:725)
at com.sun.portal.desktop.context.PSDesktopContextFactory.getDesktopContext(PSDesktopContextFactory.java:91)
at com.sun.portal.desktop.DesktopServlet.getDesktopContext(DesktopServlet.java:384)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:413)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:303)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1065)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:959)seems like you have cookie encode problem,
based on your
container you need to set the following property in AMConfig.properties
in general for welogic and web sphere contianers you need to set it to true
com.iplanet.am.cookie.encode -
Service: not found in CPACache
Hi all,
Service: not found in CPACache
Please suggest a wayout to resolve error.
Regards,
Venkatvisit this forum..its very useful
Cache....schema not available -
JPS-03026: PDPService and PolicyStore Service instance not found in default
Dear all
I just installed OIAM and I am facing this error when I try to start AdminServer:
JPS-03026: PDPService and PolicyStore Service instance not found in default context
There is an entry in the manual that says that I need to execute this:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
I did it, I see in the weblogic.policy file the entries mentioned in the manual:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_
${jrf.version}/*" {permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {permission java.security.AllPermission;
Still I have the same issue.
Any ideas?
Thanks
hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.
hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.
Maybe you are looking for
-
Flash Player installation problems with Windows Embedded (WES/XPe)
I've deployed 13 HP T5740 Thin Clients at my office, each have Windows Embedded Standard (WES/XPe) and with Internet Explorer 7. With limitations on VMWare servers and sound, users need to view webinars on their local client. When I try to install an
-
Best way to run M$ windows apps on linux ?
hi everyone, i plan on getting rid of my windows partitions. but that's big deal because i need to run a few (exotic) programs that are made for windows. i need to find a way to use them in linux, be it through a windows emulator or a computer emulat
-
Backing up my ipod touch and its not working?
hi guys...just wondering if anybody would be able to help me out with the problem i'm having with my ipod touch? either 2nd or 3rd generation 8GB yesterday-thursday, i conncted my ipod to the computer and to itunes and it proceeded to do a backup, th
-
I have problems with RuneScape
When I play RuneScape I use Java now. It used to just say Run or Don't Run. But now since I got McAfee Securtiy I have to use Java now. And now that I use Java RuneScape goes super slow now and freezes continuesly. And everytime it says Loading Pleas
-
Where do I put in my code.
I want to start eprint but where do I enter my code?