RFC system error in system/destination TMSADM@P3Q.DOMAIN_P3D Msg No. XT107
Dear All,
Whenever I run Transaction STMS and select the quality system, It is asking password in order to see the requests.
Whenever I provide the password, then I can see the request numbers but I cannot see the short text maintained for that.
But I can import the request.
Please suggest regarding this.
I will award with good points.
Hi Ganesh,
AS usual if you want to see the request in your quality system, Tms will
use TMSSUP@domainname rfc. It will not use TMSADM rfc.
Check whether that rfc working properly or not.
Regards,
Vamshi.
Similar Messages
-
RFC system error in system/destination TMSADM@ PRD.DOMAIN_DV2
Hello All,
STMS > tms alert > tms alert viever >
RFC system error in system/destination TMSADM@ PRD.DOMAIN_DV2
Message no. XT 107
Diagnosis
An error occurred during RFC communications.
Target system: PRD.DOMAIN_DV2(000)
Function: TMS_CI_PING
RFC message: connection closed
please help me to resolve issue
regards
MohsinHi ,
sm59- find - TMSADM*- got following --
TMSADMDV2.DOMAIN_DV2 3
TMSADMPRD.DOMAIN_DV2 3
TMSADMQA2.DOMAIN_DV2 3
when i was checked(test - authorazation) for DV2 and QA2 it shows following error
Connection test TMSADMDV2.DOMAIN_DV2
Connection type: R/3 connection
Cancel User TMSADM has no RFC authorization for function group SYST .
Connection test TMSADMDV2.DOMAIN_DV2
Connection type: R/3 connection
Cancel User TMSADM has no RFC authorization for function group SYST .
But FOR PRD IT SHOWS
Connection test TMSADMPRD.DOMAIN_DV2
Connection type: R/3 connection
Cancel At least three characters must be different in old/new code
pLEASE HELP ME TO RESOLVE THE ISSUE
rEGARDS
mohsin
+91-9867577675 -
RFC system error in system/destination 00024No connect to database, sessio
Hi Experts,
I am getting the below mentioned error while transporting the TO.Although the transport was successful, Please let me know how to solve the probblem.
RFC system error in system/destination Message no.XT107
Diagnosis:
an error occured during RFC communications.
Function:TMS_TP_SHOW_BUFFER
RFC message :00024N0 connect to database, session terminated
System responce:
The function terminates.
Procedure: correct the error on the whole system and execute the command again.
Many thanks in advance.
Regards,
SuneelHi ,
sm59- find - TMSADM*- got following --
TMSADMDV2.DOMAIN_DV2 3
TMSADMPRD.DOMAIN_DV2 3
TMSADMQA2.DOMAIN_DV2 3
when i was checked(test - authorazation) for DV2 and QA2 it shows following error
Connection test TMSADMDV2.DOMAIN_DV2
Connection type: R/3 connection
Cancel User TMSADM has no RFC authorization for function group SYST .
Connection test TMSADMDV2.DOMAIN_DV2
Connection type: R/3 connection
Cancel User TMSADM has no RFC authorization for function group SYST .
But FOR PRD IT SHOWS
Connection test TMSADMPRD.DOMAIN_DV2
Connection type: R/3 connection
Cancel At least three characters must be different in old/new code
pLEASE HELP ME TO RESOLVE THE ISSUE
rEGARDS
mohsin
+91-9867577675 -
RFC system error for destination GTADIR_SERVER
I just installed trial version 7.0 ABAP SP12. I started the learning path displayed in SE80, create a table and some class for working with it.
When trying to create a data-element I get the error "RFC system error for destination GTADIR_SERVER". Any hints about what this server is and how to set it up?This message is not supposed to appear for customers, but it doesn't cause any harm either. You can click through and ignore it.
The message is removed for customers in SP13. Check OSS Note 1063482. -
"RFC system error for destination GTADIR_SERVER",why?
RFC system error for destination GTADIR_SERVER
Hi AlL,
We are working in CRM 6.0.
While creating the Components and Views,i am encounter this Error.
<<
"RFC system error for destination GTADIR_SERVER"
Message no. SGSUB104
Diagnosis
Access to destination GTADIR_SERVER is currently not possible.
System Response
There was a problem with the execution of the function through a Remote Function Call (error in commmunication or communication setup).
The entered destination was GTADIR_SERVER.
The RFC error message reads:
RFC destination GTADIR_SERVER does not exist.
Die Aktion wurde deshalb abgebrochen.
Procedure
Wiederholen Sie die Aktion sp鋞er.
Wenn die Destination GTADIR_SERVER 黚er einen l鋘geren Zeitraum hinweg nicht erreichbar ist, dann verst鋘digen Sie die Systemadministration f黵 GTADIR_SERVER.
Procedure for System Administration
Weitere Informationen - siehe Systemprotokoll in Destination GTADIR_SERVER.
>>
Any ideas?
Thanks & Regards
Edited by: Autumn of Desert on Oct 12, 2009 8:33 AMCancelled
-
RFC system error: Screen output without connection to user
After running transaction SMWP, we nagivate to the "Parameters for object load management" node using the following path:
Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC -> Parameters for object load management
Under the node Parameters for object load management, when we double click any of the entries we receive the following error message in the form of a pop-up: RFC system error: Screen output without connection to user.
Has anyone encountered the aforementioned error?Hi,
while creating the syncbo you have to give the RFC destination for corresponding Bapi wrappers
so plz check that.
and can you please explain the exact error in detail and add the trace..
Regards
Manohar -
Hello friends,
During Table and structure creation i am getting error "RFC system error for destination GTADIR_SERVER" while i am creating domain and data element for that perticular table/structure. Please give me some information about GTADIR_SERVER and also provide information to rectify this error.
Thanx & Regards,
Rahul TaleleHi,
In this case please contact your basis. Because it's due to wrong patch. Please install recent patch.
Best regards,
Wojciech -
Error with "File System" destination only in a Publication
Hello,
I am able to have individual reports run & refresh to a File System destination, but when I attempt to have the same reports, as part of a Publication, save to a File System destination, I receive this error in the log:
ERROR PublishingService:HandlerPool-32 BusinessObjects_PublicationAdminLog_Instance_15516 - Publication ID # 15516 - Distribution to destination CrystalEnterprise.DiskUnmanaged ... destination DLL disabled. [http://CrystalEnterprise.DiskUnmanaged ([1]/1])]: [ (FBE60013)
If I use Email instead of File System in this Publication, the Publication runs fine, no issues.
Thanks for any help.Let's start with proper terminology
You're not sending report to unmanaged disk, you're scheduling it there.
When you use publication - you're publising it there.
2 different worflows, that use 2 different servers. Each server has to be configured for this functionality.
It is done in CMC in servers properties.
Admin guide will give you information on what each server in BO architecture is responcible for and what are the parameters that needs to be set for various workflows. -
CCDB - RFC System Failure / Name or password is incorrect
SolMan 7.1 SPS10
TCode CCDB -> Techical Systems -> SM 7.1 ABAP -> 1 Error Main States :
Store Name: STANDARD_USERS
Group Name: ABAP~Security
Store Type: Table store
In "StoreDetails" -> Check Store return: "The status of the Store is still valid." , on "Log" Tab next message: "Upload failed 'Extractor Error' . RFC System Failure / Password logon no longer possible - too many failed"
What RFC & Login is used?
How to solve a problem ?Hi Mikhail,
Please check the READ RFC destination for this system and user maintained is not locked.
Perform the authorization test for this RFC and check the results.
Hope this helps.
Thanks & Regards,
Nisha -
Difference between RFC, SYSTEM and AUDIT users?
Hi All,
Can you highlight the main differences between the following users:
RFC
SYSTEM
AUDIT
how do their functions differenciate them ?
Thanks in advance,
DiwakarRFC User
RFC user is basicly used to receive status messages. An RFC user has to be created in all the system clients where messages needs to be recieved. An RFC user can also be used for receiving messages using SMTP plug-in.
The RFC User is an sap user of type System and that's why no person can logon with this user on SAP System.
Following is thr procedure to create RFC User, remember the purpose is to recieve messages including status messages as well.
Creation of RFC User
Go to Tools > Administration > User Maintenance > Users.
Enter a name, for example MAIL_ADMIN.
Select "New"
On the Logon data tab page, select the user type System.
Enter a password.
On the Profiles tab page, enter the authorization profile S_A.SCON. This profile minimizes the risk of misuse, even if the communication system does not store the password is encoded form.
Select "Save"
Both RFC user and a System user are of type System only. Now the difference, depends upon the profile and authorization of the user.
Audit users are of type dialog, and can be used by a person to logon to system. There might be many roles assigned to this user. My understanding is that an Audit User is not a standard sap type user but just a dialog user and can be created with a conventional method of creating any other dialog users with a specific profile and authorizations.
Still to confirm, Can you please tell us, how many types of users does it shown in 4.6c at the time of user creation?
Best Regards,
Amol Bharti -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out. -
hi guys,
our company has SAP servers in location A which often communicates with servers in location B. recently we moved both DEV and PRD servers to location C from A. the servers from B and C communicates via a VPN link.sequel to this movement we changed the IP configuration of all the systems. presently users in location B can access the PRD server in C but are not able to access the DEV server.
the following error messages appears:
ON PRD
TMS Alert viewer
transport control program tp ended with error code 0212
error:could not access file as supposed
command:SHOWBUFFER PRD PF=
SAPDEV\sapmnt\trans\bin\TP_DOM
while on DEV
message:RFC-communication failure
RFC communication error with system/destination
partner not reached
would appreciate if u culd profer a solution as soon as possible
Regards walataHi Walat,
User access problem :-
You located at location B are not able to access server DEV which is located C
Pls take help from your system administrator for doing below task if you are not aware about output
From location B try to telnet server DEV on port 32<NN> or 36<NN> ( <NN> is your instance no of DEV )
for e.g
from command prompt run the following command
telnet < dev server ip > 32<NN>
check the ouput
How to check the ouput
1 after giving the above command, if you get blank screen it mean ports are open
2 after giving the above command, if you get ouput on screen like " conneting to server < dev server ip > it mean ports are not open
If the ports are not open then inform you network team that port mention aboev should be open for users.
once the ports get open check above step again , if you get the blank screen , then you wil be able to login to SAP
Server to Server Access problem :-
From server DEV to PRD and vice versa check whether you can share the drives .
if yous system team that yor PRD system should be able to to access the share folder sapmnt of server DEV ( SAPDEV )
As well as check server to server port 33<NN> is open or not
Any query pls reply.
Thanks
Anil -
Hi
Im doing a File-RFC-File scenario wothout BPM.
Getting the following error in RFC reveiver Adapter
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=<host ip address> SYSNR=00 GWHOST=<host ip address> GWSERV=sapgwXX SAPROUTER_STRING=<SAPRouter String is here> PCS=1 LOCATION SAProuter 37.0 on gareweb ERROR timeout occured TIME Mon May 11 20:52:21 200 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -93 COUNTER 425487</SAP:AdditionalText>
Your help is needed
thanks
keerthiKeerthika,
Error : 500 ->Internal Server Errors
Generally this is due to Server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Check your SAP details again on the Receiver CC, check for your authorizations ( go to R/3 and try to execute the RFC with the logon details you gave in the CC )
Check the logon details you gave in the RFC
Check if the adapter engine is up and running, to isolate this send other scenario which was working..
Also, check the following.
File->XI->RFC (Error: Received HTTP response code 500..)
Re: HTTP response code 500 : Error during parsing of SOAP header
HTTP response contains status code 500 with the description Internal Server
Received HTTP response code 500..
Venkat. -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat
Maybe you are looking for
-
How do you make the most of any "free" services/ca...
I wonder if we can get a consensus of views that could contribute to a sticky on how to get the best value for money from BTBBA (and the other BT services that this is based upon). I'm constantly confused so please excuse my ignorance: Calls: We have
-
HI ALL MAINTAINED MATERIAL MASTER - WITH CHAPTER ID AND ASSET SETTING. 1. CRAETED PO 2. DO GR 3. J1IEX FOR PART 1 AND 2 4. DO THE TRANSFER CREDIT J2I8 HOW TO DO THE COMPLETE OR PARTIAL REJECTION FOR CAPITAL CASE??? IS THERE NE HEP LINK??? TELL ME THE
-
Table to see the Tax amount of the PO item.
Hi Experts, I have a requirement that the Tax amount of the PO item should display in PO print preview. I have searched for the tables where the tax data stores to guide to the ABAPer. But none of the table I found. Only the structures I am able to
-
How do i install plugins? FCPX ( sorry sounds basic )
Sorry about this - I have only had X since yesterday - Have been using FCP for 10 years though. I cannot get so effects to instal - can someone please help me with the basics. cheers Craig
-
I am setting up a new Flex Mobile and PHP Project, my first one. I also installed Zend. And I am getting the following error when I hit validate configuration: "Cannot validate the configuration. The test file could not be created in the given web