RFC system error

Hello friends,
During Table and structure creation i am getting error "RFC system error for destination GTADIR_SERVER" while i am creating domain and data element for that perticular table/structure. Please give me some information about GTADIR_SERVER and also provide information to rectify this error.
Thanx & Regards,
Rahul Talele

Hi,
In this case please contact your basis. Because it's due to wrong patch. Please install recent patch.
Best regards,
Wojciech

Similar Messages

RFC system error: Screen output without connection to user

After running transaction SMWP, we nagivate to the "Parameters for object load management" node using the following path:
Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC -> Parameters for object load management
Under the node Parameters for object load management, when we double click any of the entries we receive the following error message in the form of a pop-up: RFC system error: Screen output without connection to user.
Has anyone encountered the aforementioned error?

Hi,
while creating the syncbo you have to give the RFC destination for corresponding Bapi wrappers
so plz check that.
and can you please explain the exact error in detail and add the trace..
Regards
Manohar

RFC system error for destination GTADIR_SERVER

I just installed trial version 7.0 ABAP SP12. I started the learning path displayed in SE80, create a table and some class for working with it.
When trying to create a data-element I get the error "RFC system error for destination GTADIR_SERVER". Any hints about what this server is and how to set it up?

This message is not supposed to appear for customers, but it doesn't cause any harm either. You can click through and ignore it.
The message is removed for customers in SP13. Check OSS Note 1063482.

"RFC system error for destination GTADIR_SERVER",why?

RFC system error for destination GTADIR_SERVER
Hi AlL,
We are working in CRM 6.0.
While creating the Components and Views,i am encounter this Error.
<<
"RFC system error for destination GTADIR_SERVER"
Message no. SGSUB104
Diagnosis
Access to destination GTADIR_SERVER is currently not possible.
System Response
There was a problem with the execution of the function through a Remote Function Call (error in commmunication or communication setup).
The entered destination was GTADIR_SERVER.
The RFC error message reads:
RFC destination GTADIR_SERVER does not exist.
Die Aktion wurde deshalb abgebrochen.
Procedure
Wiederholen Sie die Aktion sp鋞er.
Wenn die Destination GTADIR_SERVER 黚er einen l鋘geren Zeitraum hinweg nicht erreichbar ist, dann verst鋘digen Sie die Systemadministration f黵 GTADIR_SERVER.
Procedure for System Administration
Weitere Informationen - siehe Systemprotokoll in Destination GTADIR_SERVER.
>>
Any ideas?
Thanks & Regards
Edited by: Autumn of Desert on Oct 12, 2009 8:33 AM

Cancelled

RFC system error in system/destination 00024No connect to database, sessio

Hi Experts,
I am getting the below mentioned error while transporting the TO.Although the transport was successful, Please let me know how to solve the probblem.
RFC system error in system/destination Message no.XT107
Diagnosis:
an error occured during RFC communications.
Function:TMS_TP_SHOW_BUFFER
RFC message :00024N0 connect to database, session terminated
System responce:
The function terminates.
Procedure: correct the error on the whole system and execute the command again.
Many thanks in advance.
Regards,
Suneel

Hi ,
sm59- find - TMSADM*- got following --
TMSADMDV2.DOMAIN_DV2            3
TMSADMPRD.DOMAIN_DV2            3
TMSADMQA2.DOMAIN_DV2            3
when i was checked(test - authorazation) for DV2 and QA2 it shows following error
                          Connection test TMSADMDV2.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               User TMSADM has no RFC authorization for function group SYST .
                          Connection test TMSADMDV2.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               User TMSADM has no RFC authorization for function group SYST .
But FOR PRD IT SHOWS
                          Connection test TMSADMPRD.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               At least three characters must be different in old/new code
pLEASE HELP ME TO RESOLVE THE ISSUE
rEGARDS
mohsin
+91-9867577675

RFC system error in system/destination TMSADM@ PRD.DOMAIN_DV2

Hello All,
STMS > tms alert > tms alert viever >
RFC system error in system/destination TMSADM@ PRD.DOMAIN_DV2
Message no. XT 107
Diagnosis
An error occurred during RFC communications.
Target system: PRD.DOMAIN_DV2(000)
Function: TMS_CI_PING
RFC message: connection closed
please help me to resolve issue
regards
Mohsin

Hi ,
sm59- find - TMSADM*- got following --
TMSADMDV2.DOMAIN_DV2            3
TMSADMPRD.DOMAIN_DV2            3
TMSADMQA2.DOMAIN_DV2            3
when i was checked(test - authorazation) for DV2 and QA2 it shows following error
                          Connection test TMSADMDV2.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               User TMSADM has no RFC authorization for function group SYST .
                          Connection test TMSADMDV2.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               User TMSADM has no RFC authorization for function group SYST .
But FOR PRD IT SHOWS
                          Connection test TMSADMPRD.DOMAIN_DV2
Connection type:    R/3 connection
Cancel               At least three characters must be different in old/new code
pLEASE HELP ME TO RESOLVE THE ISSUE
rEGARDS
mohsin
+91-9867577675

Error message: RFC system error for destination GTADIR_SERVER (SGSUB104)

Hello people,
I'm using Sneak Preview SP12 and getting frequently this error, for example when loading some Web Dynpros already in the system, or creating Z tables.
If anyone knows how to solve or the cause please help.
Procedure for solution in message's long text is in german so I don't understand it.
Many thanks

I just patched my system to SP12 as well and suddenly received the same message. After searching this forum I only found you having the same problem. While I understand German, the message is meaningless (tells you to try later again and if problem persists, then ask your system admin). In order to get around this message (after all this missing RFC connection is not critical since after confirming it you can proceed without any problems), I simply created an RFC connection of the name GTADIR_SERVER pointing to my very own NSP system.
Call transaction SM59
Select ABAP connections and hit the create button
Enter GTADIR_SERVER as the RFC connection
Put your system name and system number (like your settings in SAP GUI) in Target Host and System Number fields
On tab Logon&Security provide client/user id/password
Usually I prefer to understand why I need to do what I do. I do not know why we need (i.e. why SAP) call(s) this destination, but my gut feeling tells me it is uncritical the way I got around it. If anyone in this forum can shed some more light on the WHY, this would be great ...
Best, Jurgen

RFC system error in system/destination TMSADM@P3Q.DOMAIN_P3D Msg No. XT107

Dear All,
Whenever I run Transaction STMS and select the quality system, It is asking password in order to see the requests.
Whenever I provide the password, then I can see the request numbers but I cannot see the short text maintained for that.
But I can import the request.
Please suggest regarding this.
I will award with good points.

Hi Ganesh,
               AS usual if you want to see the request in your quality system, Tms will
               use TMSSUP@domainname rfc. It will not use TMSADM rfc.
               Check whether that rfc working properly or not.
Regards,
Vamshi.

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

System error during RFC call BAPI_FIXACCOUNT_GETLIST

Hi Gurus,
Below are the error and steps when i perform Payroll Posting to Accounting. To enable communication between distributed systems, the appropriate method have been specified in ALE Customizing for the objects of the following tables. (Basis -> Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Maintain Distribution Model and Distribute Views.)
However, error still exists as shown below:-
1.     Run TCode PC00_M99_CIPE
2.     Encountered Error as shown below:
Communication error with system QAS, function FI_ACCT_DET_HR
Message no. 3G404
Diagnosis
The function module "FI_ACCT_DET_HR" has been called remotely in system "QAS". As a result, an error occurred when creating the connection or during communication.
Procedure
Check that the ALE distribution model is correctly maintained.
Account determination could not be performed
Message no. 3G361
Diagnosis
The account could not be determined for one of the following reasons:
No destination could be found in the ALE distribution model for the AcctngEmplyeeExpnses.Check method.
A system or communication error occurred when executing the function FI_ACCT_DET_HR in the target system.
System error during RFC call BAPI_FIXACCOUNT_GETLIST: / CPIC-CALL: 'ThSAPCMINIT' Unknown serv ice
Message no. KI012
3.      Check in SM21: NiConnect Unsuccessful, Return Code: -0003
                    Communication error, CPIC return code 020, SAP return code 665
Please advice. Thanks in advance.
Best Regards,
Fung

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

System error occurred (RFC call),key value exists in duplicate

hi bw expert ,
i happen the error report.
"system error occurred (RFC call).
key value exists in duplicate (Not allowed by the ODS object type).
Activation of data records from ODS object Z08TRFKP terminated.
No confirmation for request odsr_80p13w4lqhnib3g9tiflvth56 when activating ODS object Z08TRFKP.
Request REQU_EVZB7CK82H7YMS13X3G42GKQY , data package 000001 contains errors with status 5 .
Request REQU_EVZB7CK82H7YMS13X3G42GKQY , data package 000001 not correct.
Inserted records 1- ; Changed records 1- ; Deleted records 1-
pls, help me .
thanks.

hi experts,
the first, i initial update the data from r3 to bw ods, it is successful. the second, the system automatic touch off delta update from r3 to bw ods. it is false. now i have deleted the false delta update and repeat extractive. but it is also error.
please help me again.
thanks.

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC connection error when registering PROGRAM ID.

Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.

Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 -> Done2. Create new destination of type T (TCP/IP) -> Done
3. Make sure you select Registered Server Program option before writing your program ID -> Done
4. Write you program ID (remember it's case-sensitive) -> gave the SID name
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) -> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out.

RFC system error

Similar Messages

Maybe you are looking for