RFC to JDBC Async Acknowledgements

Hi All,
My scenarion is RFC to JDBC async. I want a ack back from JDBC side after successful uploading of data. This is a schedule job(Once in a day).
How to configure an acknowledgements?any step by step guide?
Thanks,
Arthita

Hi,
You can find more information about acknowledgements using these links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm
Acknowledgment Support in the Adapter Engine - Integration Directory - SAP Library
The documents above say that acknowledgements need to be requested by the sending application. But from the definition, you can only request acknowledgements if you are using Java/Abap Proxies and Integration Process (BPM).
Regards,
Mark

Similar Messages

RFC to JDBC async

Hi All,
I have one client specific requirement, My scenario is RFC to JDBC async.
Is it possible to know the successfully posting status in async scenario in JDBC side?
Like, from RFC they send details of 10 employee details in one go. And try to insert in DB table . 9th row is not successfully posted in DB.
Is there any way to know the successful posting report ? or can we set ECC and DB table in sync possession. or anyway to read the log (successful or not) from ECC after posting over DB table through PI??

Hello,
Are u inserting records directly in a table or using SP?
I would suggest you to use SP and allow DB to handle trasaction, so in case there is any error while inserting records SP will catch the same (using try/catch) and update some status table.
Eventually,either using DB mailer services u can get a report of the records which are sucessfully posted (i would suggest take a log of the failed records) or if u want to use PI then query that status table directly and update the same in ECC.
Thanks
Amit Srivastava

RFC to JDBC Asynchronous Acknowledgements

Hi All,
I have one scenario RFC to JDBC (SQL db) async. This is schedule once in a day.
My customer wants, if any data has unsuccessful to insert in a table of DB. ECC automatically come to know and send the particular data again.
Is it possible?how?as of now I'm using PI 7.1.
Please suggest me..
Thanks,
Arthita

Hi Arhitam
Why to complicate the scenario with acknowledgments?, your requirement implies a synchronous scenarios, if you dont want to retrieve data in the source RFC, you can do async/sync bridge like RFC - JDBC - Adapter to retrieve confirmation (Check point 4 to see an example http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f96dbf-adca-3010-ffb5-daf2d1f0e276?QuickLink=index&…)
Regards.

RFC to JDBC(Insert) async scenario

Hi Experts,
In RFC to JDBC(Insert) async scenario we are getting the the response from JDBC as <insert_count>1</insert_count> after inserting in to DB . Is there any way to stop getting response?
Regards,
Raj

<insert_count>1</insert_count>
Firstly this is not an error but an acknowledgement from the JDBC that the Insert for the corresponding Statement node is successful. The count 1 represents that you have made just one Insert-Statement call to the JDBC......had there been no Insert in the DB then you could have got 0 insetad of 1.
Normally happens when the sender requests for an acknowledgement. Don have knowledge on the ABAP-front so cant comment on the blog given by Prateek, but seems that because of the sync nature of RFC you are getting this ack from JDBC...
Regards,
Abhishek.

RFC- XI- JDBC- XI- RFC

Hi All,
Can we do RFC->XI->JDBC->XI->RFC scenario without BPM?
In this SAP-RFC executed with SELECT and Table name
And SAP-RFC expect data from JDBC connection.
If not then what could be the expected steps of BPM?
Regards

Hi,
Are you talking about a Sync call. I mean are the Sender and Receiver RFC are the same. If it is a Sync step you can do without a BPM.
Like RFC will initiate the process the XI and the the data is selected from JDBC and the response is given back to RFC.
If the above is not the case you can avoide using BPM by having to separate scenarios.
1. Scenario 1 RFC --> XI --> JDBC
2. Scenario 2 JDBC --> XI --> RFC
If there are some dependencies or due to some constraints if you need to use BPM then you will have the steps like
Receiver Async(RFC)Send Sync(JDBC)Send Async(RFC)
Thanks,
Prakash

BPM in RFC to Jdbc

Hi,
Can you send me any RFC to Jdbc sync BPM links?. Also, Can you please tell me how is the design when we use RFC and Message Interfaces involved.
Thanks,
Raj.

hi Raj,
Defining Sync/Async Communication
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/content.htm
Example: Sync/Async Communication
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
RFC Scenario using BPM --Starter Kit
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Walkthrough with BPM
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
FILE to JDBC Adapter using SAP XI 3.0
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Regards,
michal

RFC to JDBC to RFC sync

Hi all,
Anyone have any link for RFC to JDBC to RFC sync scenario step by step?
(For reverse one means JDBC to RFC to JDBC used RRBEANS configuration in sender jdbc channel and created one receiver JDBC channel.)
What should I do for the same?
Any suggestion?
Thanks,
Arthita

Hi Inaki Vila,
2. Where I need to configure the RRBEANS ? In which channel?
In the RFC sender channel, the first channel to be used. You can check it in the wiki that i mentioned above.
Could you please provide the wiki link for the same?it ll be very helpful.
3. Is it applicable for reverse scenario?
Suppose JDBC is sender and I'm using one RFC. For that also no need to use any bridge (RequestResponseBean) ?
If you want to take the data from DB source and to pass to an ECC system via RFC you wont need any bridge, you can do a normal async scenario JDBC - RFC.
I'm asking for JDBC - RFC sync scenario where I'm using one RFC.
Thanks,
Arthita

RFC to JDBC response

Hello,
I have a scenario SAP-> RFC -> XI -> JDBC. Where i'm using data from SAP R/3 to update a table in an Oracle database of a third party system. Is there any way i can find out if the fields have been updated succesfully or not?
I know that only if i use a synchronous JDBC reciever i will get a response.
Helpful suggestions will be rewarded.

Hi,
The Response sent by your JDBC adapter will be not be a Apllication Level Acknowledgement, but rather a System Level Acknowledgement and so, you will have to configure a BPM, if you want to send the number of rows Updated as a response to your RFC.
For more info, just take a look at this link,
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
It contains the info,
The response documents described below can only be evaluated by the Integration Server/PCK if the call is synchronous because the content of the response document is not accessible if the call is asynchronous. The response is put in a separate element <StatementName_response> for each statement element.
So, if you want to send the response, then you will have to configure your receiver JDBC adapter sysnchronous, use a BPM to route the response message to whichever system you want.
Regards,
Bhavesh

Want help in rfc to jdbc connection

Hi PI gurus
I have a requirement in PI that i have to integrate SAP with pacer system .pacer is having oracle database.
in SAP side iam using RFC in pacer side i have to use JDBC adapter.i have to update the data in pacer tables.this should be asynchronous messaging. Please guide me with proper blogs . i want to get step by step process. Points immedietly rewarded.
Thanks and Regards
Veena

HI,
This weblog answer your question
step by step RFC to JDBC scenario
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step%2bby%2bstep%2brfc%2bto%2bjdbc%2bscenario
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
/people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response
1. Create a RFC in the R/3 system
2. Configure the SM59 and Sender Communication channle as given in the Michal's blog. Also test if it is succesful.
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
3. Import the RFC in XI
4. Do the mapping to the target strucutre
5. Configure the JDBC receiver adapter
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
6. You can trigger the RFC from R/3 sytem by using
Async Call
CALL Function "RFC Name" IN BACKGROUND TASK destination <sm59 destination>
COMMIT WORK.
Sync Call
CALL Function "RFC Name" destination <sm59 destination>
Thanks
Swarup
Edited by: Swarup Sawant on Jan 26, 2008 9:25 AM

Help on RFC to JDBC and JDBC to RFC

Help on RFC to JDBC and JDBC to RFC
Hi Gurus
I have the scenario where an RFC will be triggered in SAP , to write to a DB2 database and insert new records in a table
and vice versa the JDBC has to read som data from a table based on a primary key, mark them as read for not be read next time and send the data to an RFC where a table in SAP will be updated.
I have never worked with JDBC before , pls advice.
is there any new issue to consider in PI 7.0 regarding JDBC
Thanks.

The requirement looks standard,
SEARCH IN SDN FOR JDBC scenarios,you will find many docs for sender as well as Receiver.
>
> is there any new issue to consider in PI 7.0 regarding JDBC
>
no issue with PI7.0.
Regards,
Raj

Error"SYSTEM Failure" while testing the RFC in SE37 : RFC to JDBC Scenario

Hi All,
I am doing RFC to JDBC scenario. When I am testing the RFC in SE37 using the RFC destination created in SM59, I get an error "SYSTEM FAILURE".
Please suggest.
Thanks,
Shyam
Edited by: Shyam Sreepada on Dec 18, 2007 5:46 PM

Hi,
You must run RFC with RFC destination in background mode, I suggest to read following post in order to understand it better.
Syntax would be:
CALL FUNCTION func IN BACKGROUND TASK
[DESTINATION <your RFC destination>]
parameter list
http://help.sap.com/saphelp_nw04/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
If you read it you will find that you can't test it directly from SE37, for this either you need to create dummy ABAP program or another RFC where you will call this RFC with background syntax.
Regards,
Gourav
Reward points if it helps you
Edited by: Gourav Khare on Dec 18, 2007 6:07 PM

Mapping problem in message response RFC -- xi -- JDBC

Hi all,
I'm using the follow scenario:
RFC <-> xi <-> JDBC
It's a synchronous interface.
In JDBC the message do a SELECT in database and returns selected rows in message response.
The message response transfers selected rows to RFC.response in the mapping.
It seems working right but no data are transfered to RFC.
In SXMB_MONI I can see the selected rows from database.
There is no error in JDBC and RFC adapter. Bellow is the message response in the SXMB_MONI:
<ns1:MT_jbdc_select_response xmlns:ns1="http://braskem.com.br/xi/sapxi03">
<t7_productionorder_response>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
</t7_productionorder_response>
</ns1:MT_jbdc_select_response>
I think that there is an error in message mapping between RFC.response <-- message_response, because I'm just mapping the fields <row> and <product>, because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.
Bellow the structure of MESSAGE RESPONSE:
 <t7_productionorder_response>
 <row>
 <PRODUCT/>
 </row>
 </t7_productionorder_response>
Bellow the structure of RFC RESPONSE:
<RFC.response>
<t_return>
 <item>
 <product/>
 </item>
</return>
</RFC.response>
When I make a link in the mapping between
<t7_productionorder_response> -> <t_return>
a short DUMP happens in RFC call in R/3.
Anyone could help me about this problem ?
Thanks in advance
Regis Ferrato

Hi,
because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.
After doing this mapping, did you test it in the IR mapping editor? was it successful?
Do specify the occurence of all the headers so we can help you better.
Regards,
Smitha.

Error in RFC-XI-JDBC scenario

Hi All,
I have a Interface like RFC-XI-JDBC and triggering the RFC in SAP system i am getting the error like "alternativeServiceIdentifier: party/service from channel configuration are not equal to party/service from lookup of alternative".
Can anybody help me what could be the reason and where i need to do settings.
Thanks and Regards,
KP

Go through See SAP Note - 730870
This should solve the issue
OR
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
alternativeServiceIdentifier: party/service from channel configuration are.
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
Thanks '
Abhishek Mahajan
******Please Reward points if Helpful**********

RFC - XI - JDBC - cannot insert in Table !

Hi Experts...
I have a scene RFC - XI - JDBC !
When executing the application in the SXMB_MONI my status is processed successfully!
But cannot insert the data in SQLServer Tables !
Im Message Monitoring i have the erros:
Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
I need to insert in 4 tables --> CRHE, CRFT, CRFV and TLINES
Where CRHE is the father table.
This is my RFC Structure:
CONTROL_RECIPE_DOWNLOAD
CLIENT
   CRFT
     item
       CRID
       FTNO
       FTTYP
       COSTR
       VORNR
       FTRNR
   CRFV
     item
       CRID
       FTNO
       FVNO
       ATNAM
       ATWRT
       ATFOR
       FVLNR
   CRHE
     item
       CRID
       WERK
       BID
       ADRES
       TSTKZ
       CRSTAT
       KTXT
       MATNR
       MATXT
       INSPLOT
       BATCH
       DEST
       SCHED_START_DATE
       SCHED_START_TIME
    TLINES
      item
        CRID
        FTNO
        FVNO
        TDFORMAT
        TDLINE
This is my XML Receiver Structure:
msgType_ibatch_po
   TABLE1
     Statement
        CRHE
          action
          access
            CRID
            WERK
            BID
            ADRES
            TSTKZ
            CRSTAT
            KTXT
            MATNR
            MATXT
            INSPLOT
            BATCH
            DEST
            SCHED_START_DATE
            SCHED_START_TIME
   TABLE2
     Statement
        CRFT
          action
          access
            CRID
            FTNO
            FTTYP
            COSTR
            VORNR
            FTRNR
   TABLE3
     Statement
        CRFV
          action
          access
            CRID
            FTNO
            FVNO
            ATNAM
            ATWRT
            ATFOR
            FVLNR
   TABLE4
     Statement
        TLINES
          action
          access
            CRID
            FTNO
            FVNO
            TDFORMAT
            TDLINE
How to resolve this problem ??? ...i believe the problem is in the action of Message Mappings ?? ...but have some problems to resolve it !
Some one can Help me !!!
Thanks Very Much for the atention !!
Regards..
Boni.

Hi Bravesh...
I don't have error in JDBC adapter !! This is OK !!
When i send the message from XI to R/3 ...in SXMB_MONI it does not contain errors !
When executing the application in the SXMB_MONI my status is processed successfully!
But cannot insert the data in SQLServer Tables !
Im Message Monitoring i have the erros:
Error No "action" attribute found in XML document ("action" attribute missing or wrong XML structure)
Error Exception caught by adapter framework: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure).
thanks.
Boni.

Performance problem in RFC to JDBC interface

Hello everybody!
i'm working whit SAP PI 7.1
We defined some interfaces RFC - PI - JDBC (SQL server) but we have some performance problem.
If we have many row to write on the table then interface finish in timeout :
Synchronous timeout exceeded.
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 1d1f00b0-fecf-11de-8738-0015600446f0(OUTBOUND) expired.
I read the PI tuning document and i tried to apply configuration whit Advanced Adapter Engine but whitout result.
Now we want change the timeout in visual admin and maybe we solve the error but i'm asking myself....:
It's normal that for write 1500 row in a table we need more than 4 minuts????
It's possible accelerate this process??? After go live we will write messages whit more than 50.000 row.
somebody may help me?
PS: please no link to tuning guide or to notes (to increase the timeout parameter).

This could be because your Database system (JDBC server) is taking more time to insert. The problem is not on PI side but on the receiving system side. Try inserting the same number od rows on the database server itself and check for the time taken for execution. Adding indexes on your database table solves the issue lot of times.
Here PI is not the culprit but definitely the receiver system.
VJ

RFC to JDBC Async Acknowledgements

Similar Messages

Maybe you are looking for