RFC to Resend the error messages

Hi All,
As I know we can resend the error messages from the SXMB_MONI, SMQ2 and Message Monitoring. But I want to know Is there any RFC to resend the error messages?
Thanks,
Satish.

Thanks

Similar Messages

  • DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

    Hi Techies,
    When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
    This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
    When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
    For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
    MY QUESTION IS:-
    IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
    Kindly assist with your thoughts!1
    -GK

    Read the steps on note 1032311 on how to achieve it,
    In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
    you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
    Solution
        o  Check the Homepage framework configuration.
      In IMG (transaction SIMGH) go in Travel Management->Employee Self
    Service->Homepages Framework->Ressources
    Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
    "EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
      Check that the field URL for PCD file is filled with
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
    der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
    com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
    l_expenses/com.sap.pct.erp.ess.tripform
      Normally if it is not filled in your client, the system should use the
    one from client 000, that is the SAP delivered customizing.
        o  Check the Portal PCD configuration
      Logon on to your SAP portal as Administrator.
      In the Content Administration - Portal content, select Content
    provided by SAP->end User Content->Employee Self Service->iViews->Travel
    and Expenses->Display Trip Form
      Right Click on Display Trip Form and Select Object->Open
      In the field Application Parameters, you will find a parameter
                                                                     Page 2
    sap.xss.tra.UsePdf=true . Delete this line completely.
    When this configuration is done, the PDF form is desactivated and the
    HTML form is used.
    This is the issue with ADOBE set up
    Firstly, I would ask you to check the customizing steps from 944221
    to ensure no issue with the ADS configuration for the pdf form.
    to review OSS note 925741 as there can be a issue with the
    platform validity and version.

  • The error message: SE 337 Please enter a line number.

    Dear Experts,
    We have a PO that can not be transferred to P1 because of the error message:
    SE 337 Please enter a line number.
    We tried to checked the transfer of the PO.
    The error message came from the Backend Function BBP_PO_INBOUND.
    But it is not possible to define the exact cause of the issue (the exact transfer parameter) due to missing RFC authorization.
    The following changes were made in the PO (PO already mapped in Backend) after that PO cannot be transferred:
    - a deleted item was set back
    - WBS Element was changed
    Thank you in advance.
    Best regards
    Evgeny

    Hello Evgeny,
    Whenever you create a  PO in SRM irrespective of number of the
    line items chosen, in the backend system this PO will contain
    a single line item in the Item section.
    If you delete all the line items in the PO and
    attempt to undelete them the undeletion will not work since the PO is already
    considered to be deleted in the backend.
    Please try delete and undelete a individual line item
    in a PO provided there is at least one item which is not deleted.
    hope this helps
    Daniel

  • Correct and re-send the error messages in PI

    Hi everyone,
    Today when iam monitoring my PI i found error like some objects missing in the que, I toublshooted it by using inbount xml payload and found the error and cunsulted the user he asked me to correct and re-send the error messages. as iam really new to PI monitoring i really dont know how to correct and re-send the error messages in PI, can any one please help me with it.
    Thanks in advance

    When you send the messages from RWB-->Component Monitoring ->Integration Engine>test message, runtime parameters like Sender System, Receiver system, Adapter specific message attributes won't carry any values. If you are using any of these paramters in the mapping step,, the mapping will fail.
    I think in your case, RFC look up would have been configured based on Sender Business system/Service. but when you send message from RWB, the value for this field is empty. So that is why it is failing  as the message cannot find the business system and communication channel.
    If you use the sender file name, server name or any other parameters in the message mapping, then message will fail in the message mapping step. That is the major set back in RWB-->Test message.
    Reasons:
    1)We post messages directly into pipeline step message mapping.
    2)The previous pipeline steps are ignored when post messages from RWB such as Receiver determination, routing etc
    3)Receiver determination step is responsible to send Sender/Receiver values into the mapping step.
    Hope i have clarified your questions

  • Modify the error message in the substitution status section

    Hi,
    we have requirement to customize the error message(if any) displayed while assigning the alternative supervisor in the Manage Substitution rules section.
    The error message is displayed in the hyperlink substitution status. After we click on the hyperlink error message is displayed
    if possible, please let us know BAPI name which returns the error message from R/3
    Thanks
    vijay

    Hi,
    You can put Stack Trace as to what BAPI's are getting called while navigating in Portal:
    To do so in R/3 Navigate to T.code ST05 and enable RFC Trace and also Activate Trace with Filter and you can set the trace for that user.
    After you do the tasks on Portal, Deactivate Trace and Display Trace which will show you all the BAPI's which were called.
    Hope this helps.
    Cheers-
    Pramod

  • I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened.  Please repair or reinstall QuickTime".  I did that and it did not help.  Any ideas?

    Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any sugge

    I received the error (in iCal on my iMac): "The server responded with an error". The error message is very large, and if there is a way to acknowledge and close it I can't find it. Because this error message is open, I can't do anything in iCal. Any suggestions on how I could kill this error message? Thanks.
    iMac, Mac OS X (10.7.2)
    Basically i tried to enter too much information into my calendar and it has crashed  now i can not get rid of the error message or use the calendar  can anyone help please

    did you find ou how to get rid of it i can't

  • In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

    In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

    use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

  • Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

    Upon upgrading iPhoto, iPhoto Help no longer works.  It gives the error message:  "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet."   I am obviously connected to the internet since you are reading this.
    I tried upgrading permissions but it did not help!?  Can anyone tell me what is wrong?  Thanks

    Try
    Reboot the computer, see if that fixes it.
    Then try:
    Backup your files off the computer (not TimeMachine) and disconnect
    Hold c boot off the 10.6 disk and simply reinstalling OS X
    Log in and update to 10.6.8
    c boot off the 10.6 disk again and use Disk Utility >Repair Disk
    reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

  • My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

    My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

    answered in your other thread LR 4 suddenly no longer recognizes files.

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • When trying to udate iTunes on my PC, I recieve the error message "The older version of iTunes cannot be removed"  How do I correct this error and not lose all the music I have in iTunes?

    When trying to update my version of iTunes on my PC with Windows 7,  I receive the error message "The older version of iTunes cannot be romoved".  How do I correct this problem without losing all the music that I have in iTunes on my PC?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • TS3899 I am having issues with both my iPad and iPhone 5C in trying to send email from my home email account. It will receive email but I can't send email, each time I try an error message comes up.  The error message is: Cannot Send Mail; Acopy has been

    The error message that is received is: Cannont Send Mail; A copy has ben placed in your Outbox. The recipient [email protected] was rejected by the server.
    Is this a problem in the way the accounts have been set up or with my local email server?

    Check the parameters in your email account against what is recommended by your email provider.
    Settings > Mail, Contacts, Calendars > account
    Have you contacted the support contact at your email provider?

  • I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    I am unable to receive or send email from my IPAD.  The error message says "Connection to server failed".  Help!! geandreamer44

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    If nothing above helped, restart your router.
    No data is lost due to a reset.

  • TS1424 Every time i want to sign in to my account i receive the error message that my apple id has not been used yet and then i get the message to contact the itune support

    Every time i want to sign in to my account i receive the error message that i need to contact itune support

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

Maybe you are looking for