RFC to SOAP in PI 7.0 (Import Issue)

Hi experts
I am working on an RFC to SOAP scenario, The scenario is working fine with out any issues on Development system, When we migrated into testing environment (from DID to AID) then the data which is coming into RFC from ECC is getting truncated
which is not mapped correctly,
I imported the RFC from Dev PI box to Test PI system, and mapping everything, I got confirmed from ECC (test) that data is being sent proeprly to PI test system, When data comes into PI test system it is getting truncated,
Can anyone through light on this how to resolve this issue,
Thanks
PR

Hi.
You must know if the Data Structure of RFC Testing Environment is the same the RFC imported in PI.
Try re-transport the RFC Structure to PI Testing Environment , after the FULL REFRESH.
You can also look at SM59 Connection and its configurations about UNICODE is right, then look Communication Channel is right.
Good Luck
Bruno

Similar Messages

RFC to SOAP Scenario - WSDL-Import really needed?

Hey @all,
we like to feed a webservice via SAP Backend. As middleware we use SAP PI 7.1.
The planned scenario is RFC to SOAP. The wsdl of webservice (NON-SAP) has no filled soapAction-Parameter and the operation with name "process" occures three times in it with the same name, but each operation "process" has it's own Request / method (axis), like "Request1", "Request2", "Request3". Each request has it's own response.
In this case it is not possible to import the wsdl as external references correctly - the import gaves an error caused of the identical names of the three operation-parameters.
The question is:
Is it possible to work this out without the import of wsdl and without soapAction-Parameter?
How could we call the correct operation?
Thanks very much in advance,
Stefan

Hi,
Maybe you could try to editing the WSDL and import it three times e.g for process (1) here is the WSDL (1) --> Make sure you delete the other process.
Make message mapping for each process and its corresponding response. So that would be, 6 message mappings (request and response) and 3 operation mappings.
In Integration Directory, call the correct operation in Interface Determination by using xPath.
http://wiki.sdn.sap.com/wiki/display/XI/XpathConditioninReceiverDetermination
although the blog above is for receiver determination, the xPath conditions for interface determination are the same.
For the without SOAP Action parameter, I guess it is okay to leave blank. I have not used the SOAP Axis though (I used the PLAIN_HTTP adapter for that). Just to be sure, test it in SOAP UI.
Hope this helps,
Mark

RFC to SOAP parameters issue - Odd!

All,
We have a RFC to SOAP scenario.. There is a table parameter with 4 fileds in it - OPERATION, ID, TYPE, VALUE.
And in RFC we pass the following in the table,
OPERATION - "CHECK"
ID - 001
TYPE - MAT
VALUE - 234567890
Somehow, the incoming XML doesnt have TYPE and VALUE, but have them concatenated into ID.When we debug on the ABAP side, we se the internal table populated properly just before the call.
But in XI - we see the incoming XML as,
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:Z_TEST xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<EX_TAB />
- <IM_TAB>
- <item>
<OPERATION>CHECK</OPERATION>
<ID>001MAT2345</ID>
<TYPE />
<VALUE />
</item>
</IM_TAB>
</rfc:Z_TEST>

Hi rk,
could it be that someone changed the coding of the RFC after you imported the RFC into XI?
If so, reimport again.
Regards Mario

RFC -- XI --- SOAP adapter -- XI -- RFC

Hi all,
I need develop this scenario.
Currently I have this one works:
RFC <> XI <> RFC
But we need change it connecting to a new XI system with SOAP adapter, and I don't have experience with SOAP.
Could somebody give me documentation or help?
Can I do this without changing nothing in the mapping except the communication channel in the old XI system?
What it is necesary in the 2nd XI system? mapping?
How I can configure both SOAP channels?
Thanks a lot.
Raú

Hi
please refer
An Overview of SOAP
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
Could somebody give me documentation or help?
--> refer above links
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
soap-rfc-file:how to start
Help SOAP to RFC Scenario using BPM (Synchronous communication)
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Can I do this without changing nothing in the mapping except the communication channel in the old XI system?
--->Then you need to release the receiver RFC as Webservice
/people/kumar.prashant4/blog/2006/07/14/using-rfc-as-webservice-in-webdynpro
RFC WSDL file
What it is necesary in the 2nd XI system? mapping?
-->the mapping will be same provided the structure of RFCs are same, or you could import the wsdl and use as external defination.
How I can configure both SOAP channels?
-->
http://help.sap.com/saphelp_nw04s/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/content.htm
Sender
http://help.sap.com/saphelp_nw04s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Receiver
http://help.sap.com/saphelp_nw04s/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/3418a0eabe072fe10000000a155369/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/02/6d5c034c182e4fbe7bfd25c2b56f9b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bf/27fd3b651f6a1ce10000000a11402f/frameset.htm
Thanks
Swarup

RFC-to-SOAP-Scenario: XIServer:NO_MAPPINGPROGRAM_FOUND

Hey guys,
We've implemented in SAP PI 7.11 a RFC-to-SOAP-Scenario. The whole scenario is sync. WSDL and RFC are imported objects.
Now we're going on to test in backend and call the related remote function module via se37.
The error message is (from xsmb_moni)::
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID A2DC458230C93030AE8B43396EEC43DB Software Component 83222F30FC9011DF8643DD3AC3E93CB3</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID A2DC458230C93030AE8B43396EEC43DB Software Component 83222F30FC9011DF8643DD3AC3E93CB3</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What we've already done:
-> Cache refresh
-> server restart
-> soap fault mapping
-> dummy changes
-> mapping is available in sxi_cache
-> function module is not dumping in backend
Any ideas how we can go futher with this?
Thank you very much and greetings,
Stefan

FYI...
Apparently, this error message can sometimes be misleading.
I found in another thread that this message came after a short dump in the ABAP function. After viewing ST22 in our backend system I noticed short dumps corresponding to the times when I make the SOAP call.
[NO_MAPPINGPROGRAM_FOUND SOAP RFC Adapter]
We can call SE37 with the same parameters and there is no ABAP error. So the search for root cause continues, but maybe this info will help someone.
-Aaron

RFC - XI - SOAP ERROR.

I get a difficult error now, following is the error.
my scerio is rfc -> xi -> soap.
http://90.3.9.11:7001/axis/DocumentService.jws?wsdl
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:intf="http://90.3.9.11:7001/axis/DocumentService.jws" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- 
- <wsdl:message name="exportFileBySapIDRequest">
<wsdl:part name="userID" type="xsd:string" />
<wsdl:part name="mySingleID" type="xsd:string" />
<wsdl:part name="sapID" type="xsd:string" />
</wsdl:message>
- <wsdl:message name="exportFileBySapIDResponse">
<wsdl:part name="exportFileBySapIDReturn" type="xsd:string" />
</wsdl:message>
- <wsdl:portType name="DocumentService">
- <wsdl:operation name="exportFileBySapID" parameterOrder="userID mySingleID sapID">
<wsdl:input message="impl:exportFileBySapIDRequest" name="exportFileBySapIDRequest" />
<wsdl:output message="impl:exportFileBySapIDResponse" name="exportFileBySapIDResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="DocumentServiceSoapBinding" type="impl:DocumentService">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="exportFileBySapID">
<wsdlsoap:operation soapAction="" />
- <wsdl:input name="exportFileBySapIDRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://DefaultNamespace" use="encoded" />
</wsdl:input>
+ <wsdl:output name="exportFileBySapIDResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://90.3.9.11:7001/axis/DocumentService.jws" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="DocumentServiceService">
- <wsdl:port binding="impl:DocumentServiceSoapBinding" name="DocumentService">
<wsdlsoap:address location="http://90.3.9.11:7001/axis/DocumentService.jws" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Design **************************************
DT_exportFileBySapIDRequest
--> exportFileBySapIDRequest
     -> userId
     -> mysingleId
     -> sapId
DT_exportFileBySapIDResponse
--> exportFileBySapIDResponse
     -> exportFileBySapIDReturn
exportFileBySapIDRequest(Message Types)
exportFileBySapIDResponse(Message Types)
MI_RFC_TO_Webservice (Synchronous Inbound)
exportFileBySapIDRequest
exportFileBySapIDResponse
MM_RFC_TO_Webservice_Req
Z_XI_FI_MAILTEST <----> exportFileBySapIDRequest
MM_RFC_TO_Webservice_Resp
exportFileBySapIDResponse <-----> Z_XI_FI_MAILTEST.response
IM_RFC_TO_Webservice
Z_XI_FI_MAILTEST     MI_RFC_TO_Webservice
Configuration ************************************
Communication Channel
sender : SAP_Sender_RFC_SEP
receiver : RFC_TO_Webservice
              target url : http://90.3.9.11:7001/axis/DocumentService.jws
sxmb_moni Trace ************************************
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = sscxidev:8001</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 90.3.9.13</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0004</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0004</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 5B0889208B6711DBC8380018717400ED</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - MYS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T11:36:36Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) MYS MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping BA9D2B14DB953699A6F72BB0C992416E</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping CAB00A010BF111DBCC73F1B85A1E0C79</Trace>
<Trace level="1" type="T">Interface Mapping http://xi.mySingle.draft.send IM_MYS</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_MYS_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_MYS_ completed. (executeStep() of com.sap.xi.tf._MM_MYS_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:37Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">-MYS</Trace>
<Trace level="2" type="T">http://xi.mySingle.draft.send.MI_MYS_Resp_IN_Async</Trace>
<Trace level="2" type="T">Channel found: - MYS - FS_MysEmpty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://sscxidev:50100/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9 End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="T">Async processing: skip mapping of response</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="3" type="T">system-ID = SXD</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-12-14T11:36:38Z UTC+9</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks.

Have you cheked this blogs?
If you havenot,
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2

Error in SAOP adapter : RFC to SOAP Synch Scenario

Hi Experts,
Scenario is "RFC to SOAP Synch".
For creating this following this link : **************** - Scenario on RFC to SOAP
Trying to send XML to SOAP receiver.
Using Below details for SOAP:
Website : http://www.webservicex.net/WS/WSDetails.aspx?WSID=59&CATID=4
Target URL : http://www.webservicex.net/SendSMS.asmx?WSDL
SOAP Action: http://www.webserviceX.NET/SendSMSToIndia
But when I try to send showing this error:
"Error in processing caused by: com.sap.aii.af.lib.mp.module.ModuleException: call to messaging system failed: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket".
Any one please suggest how resolve this issue?
Is there any setup necessary in PI server to send message through SOAP?
Thanks,
Arthita

Is there any setup necessary in PI server to send message through SOAP?
No
Solution
Check if there are any firewall rules in place which are restricitng the PI system to connect with the URL
: http://www.webservicex.net/SendSMS.asmx?WSDL
Suggestion
Copy paste this URL in browser and verify if it is accessible
Sourabh

RFC to SOAP Interface - Problem in Request Message Mapping

Dear All,
We are working on RFC to SOAP Scenario i.e. pulling out data from an WebService from SAP via PI.
In Request Message Mapping, when the wsdl file is uploaded as Target Message, the wsdl request shows the nested elements like below.
<Request>
   <Request_New>
      <PAR1>xyz</PAR1>
      <PAR2>123</PAR2>
   </Request_New>
</Request>
But the desired Request should go like below.
<Request>
   <PAR1>xyz</PAR1>
   <PAR2>123</PAR2>
</Request>
Hence it gives an error saying that the tag Request_New does not exist.

Dear All,
Our target webservice cotains multiple methods.
The every method contains its corresponding request, response and SQL ecxeption as messages.
In case of request structures, every method (except crmPaymentReceived) contains more than 1 root element.
So while calling those methods having more than 1 root element, the additional header tag will always appear(not avoidable) in the request coming from SAP PI.
For Example,
Request Structure for method u2018isLoginIdExistu2019 (having more than 1 root element)
<?xml version="1.0" encoding="UTF-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing">      -
>>>>> u201CThis Header tag will always appear u201D
<isLoginIdExistin0>asp</isLoginIdExistin0>
<isLoginIdExistin1>1</isLoginIdExistin1>
</ns1:isLoginIdExistRequest>
</soap:Body>
</soap:Envelope>
For this method, we get the error(saying that ns1:isLoginIdExistRequest xmlns:ns1="http://netpricing" does not exists).
Request Structure for method u2018crmPaymentReceivedu2019 (having only 1 root element)
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd=http://www.w3.org/2001/XMLSchema-instance xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soap:Body>
<ns1:crmPaymentReceivedin0 xmlns:ns1="http://netpricing">false</ns1:crmPaymentReceivedin0>
</soap:Body>
</soap:Envelope>
For this method, we get the success response.
I tested their wsdl URL in XMLspy and wizdal(a wsdl testing tool), it shows request in the format having only root elements and not the header tags.
But header tags will always appear when header tag contains more than 1 root element.
Can anybody suggest me how do I tackle this?
Thanks in Advance.

Error in Interface Sync RFC-XI-SOAP

Hi,
I have an interface RFC - XI - SOAP Sync.
The error appears only in PRD environment and is intermittent error.
Follow the message error in sxmb_moni:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Security.SecurityException: The event source ExceptionManagerInternalException does not exist and cannot be created with the current permissions. ---> System.Security.SecurityException: Requested registry access is not allowed. at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName, String machineName, Boolean useMutex) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName, String machineName) at System.Diagnostics.EventLog.CreateEventSource(String source, String logName) at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.VerifyValidSource() --- End of inner exception stack trace --- at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.VerifyValidSource() at Microsoft.ApplicationBlocks.ExceptionManagement.DefaultPublisher.Publish(Exception exception, NameValueCollection additionalInfo, NameValueCollection configSettings) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.PublishInternalException(Exception exception, NameValueCollection additionalInfo) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception, NameValueCollection additionalInfo) at Microsoft.ApplicationBlocks.ExceptionManagement.ExceptionManager.Publish(Exception exception) at mServices.WebServices.mServices.CancelServiceOrderList(OrderTypeCancelTO[] orders) --- End of inner exception stack trace ---</SAP:AdditionalText>
Could you help me?
Thank a lot.
Maicon.

> {quote:title=Rosa Maicon wrote:}
> Hi,
> I have an interface RFC - XI - SOAP Sync.
> The error appears only in PRD environment and is intermittent error.
> The event source ExceptionManagerInternalException does not exist and cannot be created with the current permissions.
This looks like a permission error for the user role provided in production. try sending soap request from web client tool and see whether you get the same error.
Check whether you have all the permissions required and also check whether there is WS security in the production environment.
Regards,
Pavan

RFC to SOAP Scenario error

Hello ALL
I am trying to working in RFC to SOAP scenario in sap pi 7.31 single stack system.with help of blog **************** - Scenario on RFC to SOAP
i am trying to pass input values from ECC through RFC to web service .
while sending data using function module from ECC system i got following error
thnx in advance

Hi Ganesh,
are you getting any error is SM58? Please check the below blog for configuration
Michal's PI tips: How do you activate ABAP Proxies with AEX - simplified version
IDOC_AAE To File with all Configurations
the below discussion will be useful
RFC to FILE(7.3) single stack

RFC to SOAP

Hi all,
What is Web Services and explain RFC to SOAP scenario step by step.
Thanks

Hi Anil,
> What is Web Services
Check this links
http://www.w3schools.com/webservices/ws_intro.asp
http://searchsoa.techtarget.com/sDefinition/0,,sid26_gci750567,00.html
>RFC to SOAP scenario step by step.
Check this below links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
Regards
Ramesh

Rfc to soap scenarios

hi expects ,
can any body send me the rfc to soap scenarios examples.please help me.

Hi Santosh,
Check the following link.. hope it will help u..
Configuring the Synchronous scenario in XI
Regards,
Rohit.
Reward points if helpful.

RFC TO SOAP SCENARIO

Dear Experts,
I am facing the Following error for RFC to SOAP Scenario, i Tried
1. Full Cache Refresh
2.Delete and create Sender Agreement Again
3.Specifying the Program id Again
yet the Scenario is not Working, could you please help me in Resolving this at the Earliest
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'ISU64', toParty '', toService '', interface 'YGVK_SEND_WS_TO_WS', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_YGVK_SENDER_WS_TO_WS' (channelId f1219fd41be734a2a72cd3ddcb779475)
Regards,
Vijay Karthik G

Hi,
copy the sender agreement to the same one but in party field
remove the " * " (it has to be empty)
test it and let me know
Regards,
Michal Krawczyk

RFC To SOAP Synchronus Scenario

Hi,
I am doing the scenario like RFC To SOAP sync.When i am running the RFC in R/3 it's going to dump. In the dump it's giving the message
"senderAgreement not found: lookup of binding via CPA-cache failed for" .
Thanks & Regards,
Mouli.

HI Chandra,
Check these links
XI3.0 Sender RFC Adapter fails
Re: RFC as Sender Problem
Re: RFC Call from R/3 to XI
Re: RFC adapter as sender
RFC Sender adapter - Sender agreement not found Error
Hope they help to fix your issue
Regards
Vishnu

RFC to SOAP sync error

Hi All,
I am doing the RFC to SOAP sync scenario. request R3 data is coming to XI and its triggering to SOAP receiver.
Information SOAP: continuing to response message e9598290-a14f-11df-969a-00145e474044
Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
i have tried to test the File to SOAP sync scenario to test the SOAP and its working fine. from file request to soap request and soap response to file response.
the same way i have done the RFC request to soap request and soap response to rfc response.
in sxmi_moni i can see the request from RFC but i did't find the request mapping to SOAP.
I have tested the test mapping and its working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://www.webMethods.com/2001/10/soap/encoding">exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
the r3 request stacture is:
<filed1>
<filed2>
<filed3>
<ITEM>
<ITEM1>
<ITEM22>
</ITEM>
the soap request stacture is:
<filed1>
<filed2>
   <Header>
    <filed1>
    <filed2>
    <filed3>
   </header>
   <Item>
    <item1
    <item2>
    <item3>
   </Item>
</field2>
</field1>
is there any issue with mapping?
RFC sender CC error is Error in processing caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: got unexpected document type:DOC_TYPE_UNKNOWN
Can you pls let me know the some inputs to reslove this issue
Thanks,
Venkat

have tried to test the File to SOAP sync scenario to test the SOAP and its working fine. from file request to soap request
and soap response to file response. the same way i have done the RFC request to soap request and soap response to rfc
response.
FILE to SOAP Sync scenario....did you use RequestResponseBean and are you using the same to process RFC to SOAP Sync scenario? If yes, then you dont need the RequestResponseBean for RFC <--> SOAP.
in sxmi_moni i can see the request from RFC but i did't find the request mapping to SOAP. I have tested the test mapping
and its working fine. - - Application APPLICATION_ERROR application fault exception M the r3 request stacture is: the soap
request stacture is: is there any issue with mapping?
I hope you have included a mapping program for Request Mapping and also for Response Mapping in the Interface/ Operation Mapping and included the same in Interface Determination!
Regards,
Abhishek.

RFC to SOAP in PI 7.0 (Import Issue)

Similar Messages

Maybe you are looking for