RFC Trust relationship no longer working after system migration

My enviroment 3 ERP 6.0 systems (DEV, QAS & PRD) and Solution Manager 4.0. All are on Oracle 10.2.0.2/AIX 6.1
Previously the systems were on Solaris 10 before migrating to AIX enviroment via a heterogeneous system copy. After the exercise I realised the following
1. Trust relationship between Solution Manager & the satelite systems is broken. The CUA (Solution Manager is the central system( used to rely on these RFC's
2. Early watch reports are no longer generated
Kindly advice how I can delete the trusted RFC's and regenerate from Solution manager transaction SMSY
Thanks & regards

Hi,
please check:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/content.htm
Please check:
RFC destinations for Earlywatch and MOPZ
Thanks
regards
Vikram

Similar Messages

USB drive no longer works after system reinstallation

Recently I reinstalled the system (after 1 year of no uptades). One of my USB disks (strictly speaking it is a 2.5" disk in a USB enclosure) stopped to work. When I connect the USB cable the drive icon doesn't appear on the desktop. I attach the dmesg messages:
[ 94.770021] usb 5-5: new high-speed USB device number 3 using ehci-pci
[ 95.000996] Initializing USB Mass Storage driver...
[ 95.001670] usbcore: registered new interface driver usb-storage
[ 95.001677] USB Mass Storage support registered.
[ 95.026831] scsi4 : usb-storage 5-5:1.0
[ 95.027324] usbcore: registered new interface driver ums-cypress
[ 96.070828] scsi 4:0:0:0: Direct-Access Hitachi HTS547575A9E384 PQ: 0 ANSI: 0
[ 96.073181] sd 4:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 96.073804] sd 4:0:0:0: [sdb] Write Protect is off
[ 96.073813] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 96.074428] sd 4:0:0:0: [sdb] No Caching mode page present
[ 96.074436] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 96.076557] sd 4:0:0:0: [sdb] No Caching mode page present
[ 96.076568] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 96.105465] sdb: sdb1 sdb2
[ 96.108041] sd 4:0:0:0: [sdb] No Caching mode page present
[ 96.108052] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 96.108060] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 104.480029] usb 5-5: reset high-speed USB device number 3 using ehci-pci
[ 116.032583] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.032595] sd 4:0:0:0: [sdb]
[ 116.032600] Result: hostbyte=0x00 driverbyte=0x08
[ 116.032605] sd 4:0:0:0: [sdb]
[ 116.032608] Sense Key : 0x3 [current]
[ 116.032615] sd 4:0:0:0: [sdb]
[ 116.032618] ASC=0x12 ASCQ=0x0
[ 116.032623] sd 4:0:0:0: [sdb] CDB:
[ 116.032626] cdb[0]=0x28: 28 00 57 54 52 ee 00 00 08 00
[ 116.032640] end_request: I/O error, dev sdb, sector 1465144046
[ 116.032648] Buffer I/O error on device sdb2, logical block 1269825776
[ 116.032655] Buffer I/O error on device sdb2, logical block 1269825777
[ 116.032660] Buffer I/O error on device sdb2, logical block 1269825778
[ 116.032665] Buffer I/O error on device sdb2, logical block 1269825779
[ 116.032669] Buffer I/O error on device sdb2, logical block 1269825780
[ 116.032673] Buffer I/O error on device sdb2, logical block 1269825781
[ 116.032678] Buffer I/O error on device sdb2, logical block 1269825782
[ 116.032682] Buffer I/O error on device sdb2, logical block 1269825783
[ 116.192558] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.192568] sd 4:0:0:0: [sdb]
[ 116.192572] Result: hostbyte=0x00 driverbyte=0x08
[ 116.192577] sd 4:0:0:0: [sdb]
[ 116.192580] Sense Key : 0x3 [current]
[ 116.192586] sd 4:0:0:0: [sdb]
[ 116.192589] ASC=0x12 ASCQ=0x0
[ 116.192594] sd 4:0:0:0: [sdb] CDB:
[ 116.192597] cdb[0]=0x28: 28 00 0b a4 51 3f 00 00 08 00
[ 116.192610] end_request: I/O error, dev sdb, sector 195318079
[ 116.192617] Buffer I/O error on device sdb1, logical block 195318016
[ 116.349174] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.349186] sd 4:0:0:0: [sdb]
[ 116.349191] Result: hostbyte=0x00 driverbyte=0x08
[ 116.349196] sd 4:0:0:0: [sdb]
[ 116.349199] Sense Key : 0x3 [current]
[ 116.349206] sd 4:0:0:0: [sdb]
[ 116.349209] ASC=0x12 ASCQ=0x0
[ 116.349214] sd 4:0:0:0: [sdb] CDB:
[ 116.349217] cdb[0]=0x28: 28 00 57 54 52 ee 00 00 01 00
[ 116.349230] end_request: I/O error, dev sdb, sector 1465144046
[ 116.509279] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.509291] sd 4:0:0:0: [sdb]
[ 116.509295] Result: hostbyte=0x00 driverbyte=0x08
[ 116.509300] sd 4:0:0:0: [sdb]
[ 116.509304] Sense Key : 0x3 [current]
[ 116.509311] sd 4:0:0:0: [sdb]
[ 116.509314] ASC=0x12 ASCQ=0x0
[ 116.509319] sd 4:0:0:0: [sdb] CDB:
[ 116.509322] cdb[0]=0x28: 28 00 57 54 52 ef 00 00 07 00
[ 116.509336] end_request: I/O error, dev sdb, sector 1465144047
[ 116.669240] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.669249] sd 4:0:0:0: [sdb]
[ 116.669253] Result: hostbyte=0x00 driverbyte=0x08
[ 116.669258] sd 4:0:0:0: [sdb]
[ 116.669261] Sense Key : 0x3 [current]
[ 116.669267] sd 4:0:0:0: [sdb]
[ 116.669270] ASC=0x12 ASCQ=0x0
[ 116.669275] sd 4:0:0:0: [sdb] CDB:
[ 116.669278] cdb[0]=0x28: 28 00 0b a4 51 3f 00 00 08 00
[ 116.669291] end_request: I/O error, dev sdb, sector 195318079
[ 116.825843] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.825852] sd 4:0:0:0: [sdb]
[ 116.825856] Result: hostbyte=0x00 driverbyte=0x08
[ 116.825860] sd 4:0:0:0: [sdb]
[ 116.825863] Sense Key : 0x3 [current]
[ 116.825870] sd 4:0:0:0: [sdb]
[ 116.825873] ASC=0x12 ASCQ=0x0
[ 116.825877] sd 4:0:0:0: [sdb] CDB:
[ 116.825880] cdb[0]=0x28: 28 00 0b a4 51 fe 00 00 08 00
[ 116.825892] end_request: I/O error, dev sdb, sector 195318270
[ 116.982587] sd 4:0:0:0: [sdb] Unhandled sense code
[ 116.982599] sd 4:0:0:0: [sdb]
[ 116.982603] Result: hostbyte=0x00 driverbyte=0x08
[ 116.982608] sd 4:0:0:0: [sdb]
[ 116.982611] Sense Key : 0x3 [current]
[ 116.982618] sd 4:0:0:0: [sdb]
[ 116.982621] ASC=0x12 ASCQ=0x0
[ 116.982626] sd 4:0:0:0: [sdb] CDB:
[ 116.982629] cdb[0]=0x28: 28 00 0b a4 51 e7 00 00 08 00
[ 116.982642] end_request: I/O error, dev sdb, sector 195318247
[ 117.139178] sd 4:0:0:0: [sdb] Unhandled sense code
[ 117.139189] sd 4:0:0:0: [sdb]
[ 117.139193] Result: hostbyte=0x00 driverbyte=0x08
[ 117.139198] sd 4:0:0:0: [sdb]
[ 117.139201] Sense Key : 0x3 [current]
[ 117.139208] sd 4:0:0:0: [sdb]
[ 117.139211] ASC=0x12 ASCQ=0x0
[ 117.139216] sd 4:0:0:0: [sdb] CDB:
[ 117.139219] cdb[0]=0x28: 28 00 0b a4 51 fe 00 00 01 00
[ 117.139232] end_request: I/O error, dev sdb, sector 195318270
[ 117.295904] sd 4:0:0:0: [sdb] Unhandled sense code
[ 117.295913] sd 4:0:0:0: [sdb]
[ 117.295917] Result: hostbyte=0x00 driverbyte=0x08
[ 117.295922] sd 4:0:0:0: [sdb]
[ 117.295925] Sense Key : 0x3 [current]
[ 117.295932] sd 4:0:0:0: [sdb]
[ 117.295935] ASC=0x12 ASCQ=0x0
[ 117.295940] sd 4:0:0:0: [sdb] CDB:
[ 117.295943] cdb[0]=0x28: 28 00 0b a4 51 ff 00 00 07 00
[ 117.295955] end_request: I/O error, dev sdb, sector 195318271
[ 117.452511] sd 4:0:0:0: [sdb] Unhandled sense code
[ 117.452520] sd 4:0:0:0: [sdb]
[ 117.452524] Result: hostbyte=0x00 driverbyte=0x08
[ 117.452529] sd 4:0:0:0: [sdb]
[ 117.452532] Sense Key : 0x3 [current]
[ 117.452538] sd 4:0:0:0: [sdb]
[ 117.452541] ASC=0x12 ASCQ=0x0
[ 117.452546] sd 4:0:0:0: [sdb] CDB:
[ 117.452549] cdb[0]=0x28: 28 00 0b a4 51 e7 00 00 08 00
[ 117.452562] end_request: I/O error, dev sdb, sector 195318247
[ 117.609238] sd 4:0:0:0: [sdb] Unhandled sense code
[ 117.609247] sd 4:0:0:0: [sdb]
[ 117.609251] Result: hostbyte=0x00 driverbyte=0x08
[ 117.609256] sd 4:0:0:0: [sdb]
[ 117.609258] Sense Key : 0x3 [current]
[ 117.609265] sd 4:0:0:0: [sdb]
[ 117.609268] ASC=0x12 ASCQ=0x0
[ 117.609273] sd 4:0:0:0: [sdb] CDB:
[ 117.609275] cdb[0]=0x28: 28 00 0b a4 52 06 00 00 08 00
[ 117.765841] sd 4:0:0:0: [sdb] Unhandled sense code
[ 117.765849] sd 4:0:0:0: [sdb]
[ 117.765853] Result: hostbyte=0x00 driverbyte=0x08
[ 117.765858] sd 4:0:0:0: [sdb]
[ 117.765861] Sense Key : 0x3 [current]
[ 117.765867] sd 4:0:0:0: [sdb]
[ 117.765870] ASC=0x12 ASCQ=0x0
[ 117.765875] sd 4:0:0:0: [sdb] CDB:
[ 117.765877] cdb[0]=0x28: 28 00 00 00 00 3f 00 00 08 00
[ 117.922568] sd 4:0:0:0: [sdb] Unhandled sense code
[ 117.922576] sd 4:0:0:0: [sdb]
[ 117.922580] Result: hostbyte=0x00 driverbyte=0x08
... (errors repeat)
If I try to 'mount' it as root I get:
mount: wrong fs type, bad option, bad superblock on /dev/sdb2,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
The drive is OK. I was able to use it on other computers, reiserfsck showed no errors. Also my computer is OK, and I was able to mount the drive using some old arch linux cd.
The system is 64-bit, I use the default kernel (3.9.2-1-ARCH x86_64). I wonder, what could be missing in my configuration?
I'm able to use other USB pendrives, hard disks, mouse with no problems
Last edited by senjin (2013-05-12 10:27:29)

For comparison, I attach dmesg log from another computer, which sees the drive normally:
[ 576.596709] usb 5-3: new high-speed USB device number 3 using ehci-pci
[ 577.092795] Initializing USB Mass Storage driver...
[ 577.092922] usbcore: registered new interface driver usb-storage
[ 577.092926] USB Mass Storage support registered.
[ 577.096041] scsi6 : usb-storage 5-3:1.0
[ 577.096429] usbcore: registered new interface driver ums-cypress
[ 578.097696] scsi 6:0:0:0: Direct-Access Hitachi HTS547575A9E384 PQ: 0 ANSI: 0
[ 578.100360] sd 6:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 578.101488] sd 6:0:0:0: [sdb] Write Protect is off
[ 578.101499] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 578.102675] sd 6:0:0:0: [sdb] No Caching mode page present
[ 578.102687] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 578.105731] sd 6:0:0:0: [sdb] No Caching mode page present
[ 578.105741] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 578.140717] sdb: sdb1 sdb2
[ 578.143382] sd 6:0:0:0: [sdb] No Caching mode page present
[ 578.143391] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 578.143398] sd 6:0:0:0: [sdb] Attached SCSI disk
The computer which doesn't open the drive is fairly old (AMD Athlon 64, MSI K8T Neo2). I wonder, maybe there is some module or firmware that has been recently dropped from the default setup, that I need to install separately?

[SOLVED] pure-ftpd no longer works after system update

Hi,
I made a system update today and since pure-ftpd doesn't want to start it just display "[FAIL]" but I don't have any error message.
Is it possible to see the the error log of pure-ftpd ?
Do you have any idea of how getting it working again?
Thanks
Last edited by clems45 (2011-04-02 21:41:23)

I tried to check the version of pure-ftpd: pure-ftpd -V and it replies:
pure-ftpd: error while loading shared libraries: libmysqlclient.so.16: cannot open shared object file: No such file or directory
but mysql client is installed properly! I tried to reinstall it but it changed nothing

Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger

Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

Hi Jeff,
Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
Hope it goes well,
Rick

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

RFC Trust Relationship - Authentication

Hello Experts,
Could anyone tell me what really happens behind the scenes when you setup the RFC Trust Relationship on ABAP systems?
Do the trusted system certifcate imported to the trusting system?
Do the systems exchange the certificates/keys while authentication?
Is there any help document available giving more details about what happens behind the scenes of RFC trust relationship configuration and how the single sign on possible?
One on-site consultant said that the systems exchange the certificates, and another consultant said that they exchange keys and the data is encrypted. If there is no SNC enabled how is the data is encrypted.
And also I do not see the trusted system certificate in trusting system "certifcate list".
My assumption is adding 2 systems to RFC trust relationship neither adds trusted system certificate into the trusting system nor exchange keys between systems for RFC Call. The calling system(trusted system) gets authenticated based on S_RFCACL authorization in trusting system.
Please share your thoughts or any relevant help documents
Thanks,
Himadama

Hi
Please go to this link :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/95443fbee8700fe10000000a42189d/frameset.htm
it also has clear doucmentation and steps to setup a trusted relationship:
pay attention to the following three pointers from the above link for using trusted RFC
"●      A user in the target system
●      Authorizations for the applications he or she needs to use in the target system
●      Authorization for the object S_RFCACL
This authorization object regulates a useru2019s right to log onto a system via a trusted connection"
Regards

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

Some USB ports no longer working after installing Mountain Lion?

Some of my USB ports are no longer working after installing Mountain Lion onto my 21' 2011 iMac. I used to plug in my iphone 4S and charge it, or transfer files onto my iPad but none of the ports no longer work to do this. Funnily enough, other equipment plugged into the works. I have tried changing the cable. Any ideas?

In my experience, the USB ports on the back of an Apple monitor can be re-enabled simply by unplugging and plugging back in the device in question. You might also check to see that the USB Monitor hub shows up in System Profiler. My Apple monitor USB ports experienced no changes in moving to 10.4.7.
bd

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

Many Apps are no longer working after webOS 1.4 update! - please help!

Hi,
Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
Here are the ones that just return a blank/white screen after launching so far:
SplashID
Daily Devo
Daily Light (Love)
Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
These are just a few of the Apps that I am having problems with and there are probably many others. I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
Anyone else experiencing this issue as well with any Apps?
Thanks in advance for any help that you can provide.

SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password. I see no update for it in the App Catalog.
EDIT: Never mind. It appears that it only did that on the first launch. I closed it and restarted it, and now the screen in SplashID is correct.

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

RFC Trust relationship no longer working after system migration

Similar Messages

Maybe you are looking for