RFC users locked after system copy in production system

Hi,
BW_User,MDBTC(RFC users) system users were locked in our BI Production system at the same time system copy activity was running in the Quality system(production to quality) so as per our colleagues concern after system copy they started Quality system with out changing background work-process 0 so some jobs were triggered which were copied from production system.
Is there any cause to lock RFC users in production system for system copy? If there is any other reason where we can check logs
Thanks
Jalandhar Reddy

Hi,
Well maybe i am wrong to analyze your problem .
Anyway I faced this issue to in our system before and we found that one background job was running in a system that has basically prompting an RFC connection to another system. In the t.code SM59 and there was wrong password was put in.We just reset the password and it was worked fine.
You can try for this..
Regards
Bhuban
RKFL

Similar Messages

Replacing development system with copy of production system during upgrade

Hello Guru,
We are planning to replace our development ECC 5.0 system with a copy of production system, and to perform upgrade to ECC 6.0.
SAP upgrade guide stating that:
"If you have modified SAP objects, make sure that you keep your development sysetem. Do not copy your production system to your development system for test purpose."
If we are planning to "Reset to original" for majority of SAP's objects during SPAU, are there other reasons we need to consider the impact of replacing development system with a copy of production system?
Thanks in advance!

Thanks for your response.
When we first implemented SAP system 3 and half years ago, the consultants and the developers were using the development system like a sandbox system, they tried out features or developed programs for learning purpose.
Hence, the development system and production system are very different.
There are many repair transport requests that will never transport into production.
Also, we developed client strategy (different client numbers for each system u2013 Dev, QA, Prod) during the initial implementation.
We were told by the upgrade consultant, it is standard that the development system replaced by a copy of production system during upgrade. The client number in development system will be the same as the production system after upgrade. If I want to avoid confusion for the developer & testing users, I would have to create a new client using the previous development client number, and then perform client copy.
As I review the SAP upgrade guide, I saw the statement about not to replace development system with production system, I would like to know the reasons behind SAP's statement.
By the way, we will replace our QA system with a copy of production system during the upgrade.

Transformation inactive after system copy in SCM system

Hi Team,
I am posting this in BW keeping in mind that i am receiving issues in RSA1 transaction in my SCM system after the recent system copy. We did the system copy of SCM system and DTP conversion was also done using program RSBKDTP_BDLS. No errors occurred while the program ran. Now we have handed the system back to users for checking and they have reported an error saying there were some transformations missing in the system while checking the DTP . I went to RSA1 transaction in my SCM system and searched for the DTP and status seems to be in inactive status. I then clicked on change button and an error message mentioning the below appears.
Transformation XXXXXXXXXXXXXXXXXXXXXXXX inactive; action cannot be executed
Message no. RSBK260
Diagnosis
A transformation (XXXXXXXXXXXXXXXXXXXXXXXX) used by the DTP is inactive.
System Response
The action (request processing or DTP maintenance) was terminated.
Procedure
Activate the transformation. It connects the source XXXXXXXX XXXCLNT100 to the target XXXXXXXX.
I checked for the transformation entry in the table RSTRAN and did not find the same. Also i ran the program RSDG_TRFN_ACTIVATE to activate the transformation but nothing happens.
Have anyone came across this type of issue. I need some advise on the same and guide me in case if i am missing something, since i have not worked on this type of issue before.
Thanks for your help in advance.
Rajesh

Hi,
Due to the system copy we always get this issues.
Just ask your basis team to check source system assignments. they can do it.its their activity.
at BW Server, RSA1 -->menu tools--> manage source system, check the source system. same need to have at below we20.
at Tx - WE20, Partner type Ls---> under this you may see your target(SCM) and source system anmes. select source name and rigth side panel partner status need be active A.
At quality syste, activations thru program may not be happen. better to re-transport the dtp from dev system.
Thanks

Error during System copy of SCM system

*Hi
We are performing system copy of SCM system. The Java was not at all running in the system now while performinfg system copy we are facing following errror.*
ERROR 2009-10-23 12:05:39.123
CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_12-x64\bin\java.exe -classpath E:\usr\sap\SD2\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_jce.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_jsse.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_smime.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/iaik_ssl.jar;
MB1ES1018/sapmnt/SD2/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/antlr.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/exception.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/jddi.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/logging.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/offlineconfiguration.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/opensqlsta.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/SDMutil.jar;E:/usr/sap/SD2/SYS/global/sltools/sharedlib/SLUtil.jar;E:\usr\sap\SD2\DVEBMGS00\exe\ojdbc14.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/SCM51/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=SD2 -dsn=jdbc/pool/SD2 -ssprops=E:/usr/sap/SD2/SYS/global/security/data/SecStore.properties -ssk=E:/usr/sap/SD2/SYS/global/security/data/SecStore.key' aborts with return code 64 due to a database connection error. DIAGNOSIS: The connection parameters are wrong or the database server has been shut down. SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/SCM51/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP/UTL.java.log' for more information.

Hi.
>SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/SCM51/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP
>/PREEXP/UTL.java.log'
Hi,
Could you please paste above logs here and also check whether database is up or not...
Thanks
Sunny

Error during System Copy in SCM system

*Hi
We are performing System Copy of SCM system. Java was not running in the system from the starting. we are facing following error while performing system copy* Please Help..
Oct 23, 2009 12:05:38... Info   : Successfully parsed!
Oct 23, 2009 12:05:38... Info   : Executing command Export...
Oct 23, 2009 12:05:38... Info   : Establishing DB connection...
Oct 23, 2009 12:05:39... Path   : Exception : The DataBase is down or the connection parameters are wrong: -sid=SD2 -dsn=jdbc/pool/SD2 -ssprops=E:/usr/sap/SD2/SYS/global/security/data/SecStore.properties -ssk=E:/usr/sap/SD2/SYS/global/security/data/SecStore.key -keyphrase=null
java.lang.Exception
     at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1141)
     at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:413)
     at com.sap.exception.BaseException.<init>(BaseException.java:302)
     at com.sap.sl.ut.infoprovider.exceptions.UTInfoException.<init>(UTInfoException.java:96)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:215)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:624)
     at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:56)
     at com.sap.sl.ut.manager.command.Export.execute(Export.java:80)
     at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
     at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:60)
     at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:283)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:278)
     at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:790)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:362)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.sl.ut.manager.persistence.db.DBConnection.connectViaSecureStore(DBConnection.java:159)
     at com.sap.sl.ut.manager.persistence.db.DBConnection.connect(DBConnection.java:171)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:213)
     at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:624)
     at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:56)
     at com.sap.sl.ut.manager.command.Export.execute(Export.java:80)
     at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
     at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:60)
     at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Oct 23, 2009 12:05:39... Info   : Severe (database) error. Return code: 64

> We are performing System Copy of SCM system.
How did you do the system copy? Did you use sapinst and export the Java content?
Markus

System copy on target system problem

Dear All
Please help me
I system copy on targer system problem (Java Migration Tool Kit) and debug with SAP NOTE 1119190 but I can't find jmt.jar.
This is log runJmt.log
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.lang.NoClassDefFoundError: com/sap/sdt/util/vers/VersionException
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.createVersion(MigrationToolImport.java:984)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1062)
     ... 5 more
Thanks

Dear All
Please help me
I system copy on targer system problem (Java Migration Tool Kit) and debug with SAP NOTE 1119190 but I can't find jmt.jar.
This is log runJmt.log
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.lang.NoClassDefFoundError: com/sap/sdt/util/vers/VersionException
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.createVersion(MigrationToolImport.java:984)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.startTool(MigrationToolImport.java:172)
     at com.sap.sdt.jmt.migrationtool.MigrationToolImport.main(MigrationToolImport.java:1062)
     ... 5 more
Thanks

Data Load Error after Client copy on Source System

We did a client copy to our QAS source system. After that was complete, I tried to do a couple of full data loads. But they fail. The only errors I see are on the source system when I try to manual update the Idocs. They are:
EDI: Partner Profile not available
Entry in inbound table not found
Is there a step I need to take after the client copy and before the loads? I have a feeling that I'm forgeting something.
Thanks,
Chris

Hi Chris,
Check the following.
1> Go to WE20 check whether you are able to see two logical system in "Partner Type LS" one for Source and one for Myself.
2> If you say Yes for <1> then check in both the logical system, in the classification tab, partner status should be 'active'.
3> Check you have used REMOTE USER in main and in Outbound and inbound Parameters "Post Processing Permitted tab " for each Message type.
4> go to out bound message type and check the "Receiver port" pointing to correct RFC destination for both ( Source and Myself logical system).
If your answer is no for <1> then perform all the steps.
Hope this will help you.
Suneel

Copy QAS customizing after TDMS copy from Production are finished

Hi Gurus,
I need your help whit this issue. I use TDMS to create a second client in QAS with Production data but I have to manteinance a QAS customizing.
The TDMS copy was finished OK. So, the customizing is same as the production system; but I need the customizing from QAS system.
Have I import ALL transport to QAS in the new client ?? Or I can do a client copy??
How to copy the customizing QAS to the new client in the same system??
If I do a client copy with SAP_CUST profile, the documentation said that the appliction data was deleted.
SAP_CUST
Client-dependent Customizing, including authorization profiles, are copied. The application data is deleted and the user data is retained.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c2/17e73a86e99c77e10000000a114084/frameset.htm
I don´t know how is the best practice for this situation...
Somebody can help me for this?
Thanks a lot.
Sergio.

Hello.
What we do here (sucessfully) is to install in QAS all transports in the queue to the production system. Of course for that you have to be sure that your queue really represents the delta between QAS and PRD.
Actually that's already how we did it before TDMS: we made full system copies, but then imported the queue back in QAS so that we would keep the customizing (and ABAP).
Regards,
Rui Dantas

New Development system copy from Production

Hi All,
Hope you can help me out here with some ideas.
We are currently planning to implement a new SAP BW Development system, and for this we would like to make it a 1:1 copy of our current production system. Meaning all from customizing, ABAP, workbench objects etc.
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
My question is then, is there any other ways to do this when system copy is a no go? I know we can do client copy but then we will not get all the workbench / ABAP programs which we need.
Any ideas on how to do this?
Thx. in Advance

Hi Rasmus,
But what we do not want is all the transaction and master data in infoobject, cubes etc., we are only interested in the structure and objects. Therefore we can rule out "System copy".
Options 1: As BI objects are cross client , copying client will not solve your purpose 100%.
You can perform system copy and then clean up data in DEV
Option 2: You can create a new Development and then create TRs for required configuration objects and move to new development system.
Option 3: Use SLO tools to perform container copy without any data.
Hope this helps.
Regards,
Deepak Kori

Users Locked after Patch Upgrade

Hello,
After a patch update all users locked .. how to find the reason ..
Thanks,
DereK

Hi DereK,
Please check the below documents : -
http://www.sapfans.com/forums/viewtopic.php?f=24&t=19370
http://help.sap.com/saphelp_nw04/helpdata/en/c4/f01241c738f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/0a/065e4278636255e10000000a155106/frameset.htm
Hoe it helps
Regards
Arun

Copying portal production system to portal test system

Hi experts,
We must copy portal production to portal test.
Is there document how to do it?
Thanks.

you can find the documentation in the below link
service.sap.com/systemcopy
also check
service.sap.com/instguides and service.sap.com/instguides/installations
you need S user id to access.

BI System Copy of disconnected systems

I am SAP BI person and need some suggestion regarding the BASIS expertise.
If I have two BI systems (Say BI-1 & BI-2). I do not have any transport path maintained nor any connection between these two servers.
If I develop some objects in BI-1 system, can I copy to BI-2 system using some mechanism or custom software. I can also go with the system copy.
Here I have two questions:
1. If both the systems are running on different OS platform
2. If both the systems are running on same OS Platform
What would be the possibility in above mentioned cases? Can I copy the system or objects?
- Danny

Hi,
Here I have two questions:
1. If both the systems are running on different OS platform
Transport it, else copy the CoFiles and DataFiles from B1 to B2 and try
2. If both the systems are running on same OS Platform
What would be the possibility in above mentioned cases? Can I copy the system or objects?
If your Basis team is strong you can do it.So you need basis help.
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

System Copy and Logical system name conversion

Hello All,
Can any one let me know some inputs over these few queries.
1. How much time would a 500+GB clients take for Export and reimport after the system copy.
2. What would be run time of the BDLSS report ( Converting the logical system names) for a typical 1500 GB QTY system
The requirement is my QTY has 3 clients, and i would like to refresh it with my PRD data. How do i safely perform thia activity with the least downtine possible and please note, the clients are around 500+ GB huge..
Thanks in advance for your inputs.
Rgds,
Sri

Hi Frank,
the parameters of my installation are as folows.
Appl Serv : OS - AIX (5.2 Version) and CPU's - 4 (Mem 20480) ::: DB serv : OS - AIX(5.2 Version) and CPU - 6 (Mem 22528)
The DB version is Oracle 9.2
We are on 4.7 enterprise version of SAP with SAPKA62055 patrch level.
br
Sri

System copy of JDI system.

Hello Experts,
We have our JDI on admi1 server (6.40).
We made a system copy of admin1 java +abap stack in order to create a support path. (admin1 we are plannign to upgrade, admin2 will be our support path in downtime)
Basically we are trying to mirror JDI on admin2 server.
after the system copy i went in and changed the values in the dtr server, cbs server on admin2 and changed them to point JDI on admin2.
The track we have is for a ESS devlopment. I checked out code from the track. (here the dependent component popup has only one ess/per...the components xsss/pcui and utils and many other components are not showed up in the popup). In our admin1 server are the dependent components are showed in popup window.
When I tried to build the project, its throwing over 1000 build errors. I am assuming it is because the dependent compojnents are missing in popup.
Can anyone suggest me where I can add those built time components or suggest me a checklist of items I have to do after doing a system copy.
Thanks,
James

Hi James,
did you checked your track in CMS and at CBS.
in CBS->comaprtment you can check all the DCs and SCs are available in track or not.
acoording to situation re configure your track.

RFC users locked after system copy in production system

Similar Messages

Maybe you are looking for