RFC2SOAP error : connection to partner 'loopback:0' broken / CPIC-CALL:

Hi all,
   現在有一個RFC2SOAP的Scenario,在PI7.1的PRD里面，以前一直都OK，昨天下午開始報錯，錯誤信息如下：
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'loopback:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 th</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. connection to partner 'loopback:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 th</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
   在網上查了很多資料，都沒搞清楚到底是什么問題。
    請高手指點，謝謝！
Thanks,
Rubens

这个错误看起来像是底层的通讯错误，应该和场景配置没关系，你可以SM59测试一下RFC AI_RUNTIME_JCOSERVER 是否正常，或者重启一下server试试看?

Similar Messages

Connection to partner HOST:PORT Broken

Hi Experts,
When I am working with screen painter If I open screen painter layout its not opening properly(Its opening in alpha numeric mode) and shows Connection to partner HOST:PORT broken. If I open in my colleagues system with my user id its working fine.How to resolve this problem.

try restart your system and see. It could be temporary network bottleneck.
Regards,
Vincent

Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngA

Hi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

Sapxpg - connection to partner broken (SLD - SolMan)

Hello,
I've problem wtih my RFC-Connection SAPXPG_DBDEST_<host>.
To collect data for dba-cockpit, we need a RFC-Connection between SolMan and SLD:
RFC Destination     SAPXPG_DBDEST_HBMESA5A
Connection Type T TCP/IP Connection                 Description
Description 1       sapxpg
Program               sapxpg
Target Host          hbmesa5a......
Save as               10.0.61.86
                                 20     Defined Value in Seconds
Gateway Host        hbmesa5a......
Gateway service:   sapgw00
Gatway is running correct.
Connection Test gives result:
Logon     Cancel
Error Details     connection to partner '127.0.0.1:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
Error Details     ERROR: connection to partner '127.0.0.1:0' broken
Error Details     LOCATION: SAP-Gateway on host hbmesa5a / sapgw00
Error Details     DETAIL: NiIRead: 127.0.0.1:0
Error Details     CALL: recv
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 9655
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 4702
Error Details     RETURN CODE: -6
Error Details     SUBRC: 0
Error Details     RELEASE: 711
Error Details     TIME: Fri Feb 4 17:28:20 2011
Error Details     VERSION: 39
rfc-connection from our solution manager to the target host.
Could anyone give us advice? Thanks in advance
Best Regards
Gerry Vanek
Edited by: Gerry Vanek on Feb 4, 2011 5:34 PM

Hello,
we fixed the problem. Really simple when you know ...;()
We deleted the existing RFC-Connection and created a new one with the same parameters.
After that the connection works fine. The RFC had the problem, probably a corrupted entry in the table.
Best regards
Gerry Vanek
Edited by: Gerry Vanek on Feb 25, 2011 3:37 PM

"Connection to Partner Broken" Message

I have a NW4 preview installation running on Linux. I get the following message while trying to connect from a W2000 client. I also cannot connect locally on the linux machine using the Java GUI. I get a similar message.
Here is the Windows message:
[code]D:\Program Files\SAP\FrontEnd\SAPgui>niping -c -H server -S 3200
Wed Feb 22 13:41:43 2006
connect to server o.k.
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1094]
ERROR => NiTClientLoop: NiTReadLoop (rc=-6) [nixxtst.c    1851]
ERROR       connection to partner broken
TIME        Wed Feb 22 13:41:43 2006
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -6
MODULE      ninti.c
LINE        1094
DETAIL      NiPRead (192.168.1.201/3200)
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     1
*****************************************************************************[/code]
Here is the Linux message.
[code]/home/nw4/SAPClients/SAPGUI6.40rev6/bin $ ./guistart /H/local host/S/3200
[Thr 1075193536] Thu Feb 23 08:55:12 2006
[Thr 1075193536] *** ERROR => ***AgCom ConnectDirect m_bState FALSE (0x84c0af0): Error: partner not reached (host localhost, service 3200)
Thu Feb 23 08:55:12 2006
Release 640
Component NI (network interface), version 37
rc = -10, module nixxi_r_mt.cpp, line 8684
Detail NiPConnect2
System Call SiPeekPendConn
Error No 111
'Connection refused'
[nixxi_r_mt.c 8684]
ERROR #############################
23.02. 08:55:12.770 ERROR: JniAgComAdaptor.connect failed
ERROR #############################
java.lang.Exception: Error: partner not reached (host localhost, service 3200)
[/code]
Any ideas on how to troubleshoot it would be appreciated

Hi Jerry,
The error 10054 as you indicated in your message, is normally due to an error of the TCP/IP connection between 2 nodes, which has been lost.
There can be a variety of reasons for this from an incorrect termination of the connection on one side to physical network problems etc.
Please check out following SAP OSS Notes for further information in service marketplace:
155147 WinNT: Connection reset by peer
413330 Network timeouts
500235 Network Diagnosis with NIPING
This could be due to hardware problems with the network, or to network problems. Please use the 'NIPING' tool to trace and check the network connection as per note 500235.
You could ask your Network Administrator to ensure your network status is healthy.
Hope this helps.
Regards,
Vincent Lim

Connection to partner "10.110.10.214:3343' broken

Hi all,
My EP 7.0 is connected to ECC 6.0
When I click on 2 iviews, i get 2 different errors
ERROR 1 - 500 Internal Server Error on the timesheet iview
ERROR 2 - com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Unrecognized User , error key: RFC_ERROR_SYSTEM_FAILURE
-->. When I look in to default trace I get the following error -
ERROR       connection to partner '10.110.10.214:3343' broken
TIME        Sun Nov 23 15:20:13 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4424
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     4
I checked -
Checked Hosts file and Services file in Windows (EP side). Did not check anything on ECC (AIX system)
SLD - is running
In Visual Admin, Tested the CIMClientTest - it works
JCO RFC connections - Can ping, test
RZ70 - Tested ok. Can do SLD data transfer
SM59 on R3 - checked SLD_NUC and SLD_UC - connection test successful.
Please let me know if any of you guys can help ...

Just wanted to note that port 3343 is reserved for Microsoft Cluster Service (since this is going to the remote system that probably would not affect the connection).
You might want to check the gateway log on the ECC box (transaction SMGW) to see if any connection issues are showing up there.
Hope that helps.
J. Haynes

CONNECTION TO THE MODULE IS BROKEN

i am using FP-1600 with DO-AC-240 after two or three write operation to the FP-DO-AC240 module field point explorer give the error "CONNECTION TO THE MODULE IS BROKEN".error message comes with FP-RLY-422 module also.why?

Vinod,
Noticing that you are using both FP-DO-AC240's and FP-RLY-422's, I am assuming that you are attempting to switch AC voltage through the FP-RLY-422 module. I am further assuming that you are controlling an AC motor or solenoid or similiarly high inductive load. With high inductive loads, turning the power off results in a large spike of voltage, generated by the inductor (such as the solenoid) to be driven back along the circuit. These spikes, can have a number of effects on electronics. They can cause the the network module to temporarily lose communications with the I/O module, or in some cases can be so severe as to cause damage to a module.
If you were to measure the control lines with an oscilliscope, you are likely to see spikes that can be mo
re than 1000 Volts. We do have circuitry in the modules to help minimize the spikes (these spikes are known as back-EMF). Occasionally, however, the spikes are so large that our built-in protection is not enough. I recommend using an AC snubbing device such as a Metal Oxide Varistor (MOV) to reduce the back-EMF being seen in your circuit. Reducing the back-EMF will solve the temporary communications loss you are seeing.
Regards,
Aaron

Risk Terminator error CPIC-CALL: 'ThSAPCMRCV' : cmR

Hi,
I have configured risk terminator. I have tested the RFC connection and it seems fine and referenced this in the configuration. However I get an error when I go to add a role to a user. It attempts to execute a risk analysis and then returns an error.
connection to partner 'X' broken / CPIC-CALL: 'ThSAPCMRCV' : cmR
I seem to have all configuration set correctly. Except for one question- do I need a unique report name for each system connector e.g. if I use GRCRTTOCC5X for my R/3 system, can I also use it for SRM system?
Anyone have any ideas about this error?
Thanks,
Niamh

Hi Sunny,
after some testing I figured out the problem. Because I am working with an ECC6.0 system that has been upgraded, I needed to check the unicode flag on the risk terminator RFC connection. It now works and I am no longer getting the error.
Niamh

CPIC-CALL Transaction program not registered Error while creating RFC Desti

Hi All,
I am trying to create a new RFC Destination.
Details I have provided are..
1.RFC Destination Name
2.Connection Type - TCP/IP
3.Description
4. Activation Type - Registered Server Program.
5.Program Id.
6. Gateway Host and Gateway Service.
But When I Test the connection, I am getting the following error.
<b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
However I was able to create and connect RFC Destinations successfully previously.
I am not SAP guy. Could someone help resolve this issue.
Thanks,
Phani

hi Sekhar,
I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
User: CRREMOTE (Client: 071)
Destination: OCR (handle: 1, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Transaction program not registered
DEST =OCR
HOST =%%RFCSERVER%%
PROG =dpssrfc
Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
3 804778
resize I/O buffer to 28000 bytes
>>>> [2] MQ_LINK : TCP <ac: 3> K %%RFCSERVER%% >>> OPEN
{45632F14-288E-0046-0000-0000A888A7AA}-
======> CPIC-CALL: 'ThSAPECMINIT'
can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
Awaiting your reply,
Thanks & Regards,
Yogesh

Connection to partner broken error message

Hi everyone,
We have an issue with uploading of large files on NetWeaver 7.1 SP3 (it works fine for small files). After some time of upload running, the following exception is thrown:
Caused by: org.jvnet.mimepull.MIMEParsingException: com.sap.bc.proj.jstartup.fca.FCAException: Cannot get InBuffer: -7 connection to partner broken.
     at org.jvnet.mimepull.MIMEParser.fillBuf(MIMEParser.java:416)
     at org.jvnet.mimepull.MIMEParser.readBody(MIMEParser.java:191)
     at org.jvnet.mimepull.MIMEParser.access$500(MIMEParser.java:62)
     at org.jvnet.mimepull.MIMEParser$MIMEEventIterator.next(MIMEParser.java:143)
     at org.jvnet.mimepull.MIMEParser$MIMEEventIterator.next(MIMEParser.java:117)
     at org.jvnet.mimepull.MIMEMessage.makeProgress(MIMEMessage.java:186)
     at org.jvnet.mimepull.DataHead$ReadMultiStream.fetch(DataHead.java:201)
     at org.jvnet.mimepull.DataHead$ReadMultiStream.read(DataHead.java:172)
     at java.io.InputStream.read(InputStream.java:89)
Is it possible to tune the http service like in NW 6.4 version?
Thanks,
Radu

Hi Shaji,
we have two possibilities to upload large files:
1. Using MTOM Web Services. Here we provided our own Web Services implementation layer based on JAX-WS 2.1.3 reference implementation. For larger files we got the connection broken exception, with the following NW related stack trace:
Caused by: com.sap.bc.proj.jstartup.fca.FCAException: Cannot get InBuffer: -7 connection to partner broken.
     at com.sap.bc.proj.jstartup.fca.impl1.FCAConnection.nativeRead(Native Method)
     at com.sap.bc.proj.jstartup.fca.impl1.FCAConnection.read(FCAConnection.java:272)
     at com.sap.bc.proj.jstartup.fca.impl1.FCAInputStream.read(FCAInputStream.java:102)
     at com.sap.bc.proj.jstartup.fca.impl1.FCAInputStream.read(FCAInputStream.java:67)
     at com.sap.engine.services.httpserver.server.io.HttpInputStreamImpl.read(HttpInputStreamImpl.java:167)
     at com.sap.engine.services.httpserver.server.io.ChunkedInputStream.unchunkNext(ChunkedInputStream.java:95)
     at com.sap.engine.services.httpserver.server.io.ChunkedInputStream.read(ChunkedInputStream.java:57)
     at org.jvnet.mimepull.MIMEParser.fillBuf(MIMEParser.java:414)
2. Using the HttpServletRequest input stream. In this case, the NW related stack trace is:
Caused by: com.sap.bc.proj.jstartup.fca.FCAException: Cannot get InBuffer: -7 connection to partner broken.
     at com.sap.bc.proj.jstartup.fca.impl1.FCAConnection.nativeRead(Native Method)
     at com.sap.bc.proj.jstartup.fca.impl1.FCAConnection.read(FCAConnection.java:272)
     at com.sap.bc.proj.jstartup.fca.impl1.FCAInputStream.read(FCAInputStream.java:102)
     at com.sap.bc.proj.jstartup.fca.impl1.FCAInputStream.read(FCAInputStream.java:67)
     at com.sap.engine.services.httpserver.server.io.HttpInputStreamImpl.read(HttpInputStreamImpl.java:167)
     at com.opentext.ecm.services.streaming.impl.Streaming.read(Streaming.java:313)
Again, it works well for small files.
Thanks in advance,
Radu

Connection to partner broken in SAP R/3 4.7

Hi all,
I am trying to connect R/3 4.7 server from SAP GUI 640 (patch 16).
I am able to login but when I execute transactions which extract data(heavy) eg. ST22, PFCG, ST03 , it is giving the below error.
<SID>: Connection to partner broken
Time Thu Oct 15 13:00:15 1998
Component NI (network interface)
Release   640
Version   37
Module   ninti.c
Line   789
Method   NiPRead(<IP Address>/sapdp00, hdl 2)
Return Code   -6
System Call   recv
Error No   10054
Error Text   WSAECONNRESET: Connection reset by peer
Counter   2
But I can access the same server from the same network in other system with same GUI version and patch level.
Can any one tell me the reason and the solution for this problem.
Thanks in advance
Regards
Eshwar

Hi Manas,
I have tried to ping using the given parameters in both the systems, but in both the systems I am getting Request timed out.
What can I do now???
Rgds
Eshwar

Connection to partner 'seccprd-be:sapgw00' broken

Hi All,
We are facing tRFC queue in error in TC SM58.
error is connection to partner 'seccprd-be:sapgw00' broken
Error is like that:
Caller    :-DEVELOPER
Function Module :- IDOC_INBOUND_ASYNCHRONOUS
Target System       XXXCLNT200
Date    xxxxxxx
Time    xxxxxx
   Status Text1 Utente bloccato (informare il responsabi
Any Suggestion
Regards
Gagandeep

Hi,
Utente bloccato
The user that you are using to authorize the RFC connections is blocked. Unlock the user in target system and make sure that the password provided in your system in sm59 is correct (by testing the connection).
Hope this helps,
Greg

SAPROUTER - connection to partner broken

Hi gurus,
I log to my company using a saprouter (the distance from my office is 300 Km).
All seems to work fine, the only problem (big problem) is that the connection is broken very frequently: I think that the average period lasts 10 minutes. This is the error:
DV1: connection to partner '195.223.140.219:3299' broken
Component     NI (network interface)
Release     710
Version     39
Module     nixxi.cpp
Line          4554
Method     NiRead
Return Code      -6
System call     recv
Error No     10054
Error text     WSAECONNRESET: connection reset by peer
Counter     1
What could be the reason?
I think that the saprouter string is correct because I can log to the system. Also the internet connection seems stable ...
Thanks a lot
Guido

hi guido,
it seems that you have low quality network connection with your SAP server. Check your connection first.
ardhian
http://sapbasis.wordpress.com

IDE:connection to partner broken

what's the problem?how to solve it?help me,thanks!
it popups a dialog box with messages as below everytime,a few minutes after i started up SE38(ABAP Editor):
IDE:connection to partner broken
Error Text WSAECONNRESET :Connection reset by peer
Error No 10054

Hi Snow
That message is indicating that:
Server Connection is Lost or Server is in DownTime Status.
LogOff and try again or Contact your Basis Person.
Regards,
Sree

Icxxthr_mt.c "500 connection to partner timed out" Error: -5

Hi,
   I'm using a CRM. I'm connected on an Application Server.
I enter the transaction crmd_order_bp and with a business partner, I want to see a particular view in the fact sheet, the informations are situated on the Database Server. The impacted tables by this transaction are bulky and many users are connected on the system.
The result is the following message:
     500 connection timed out (-5)
    version: 6040
    component: ICM
    module: icxxthr_mt.c
    detail: connection to partner timed out
Now, I want to grow up some parameters from the ICM module if it is the
solution !!!!
So, I listed the parameter attributes in my system:
- icm/conn_timeout = 5000
- icm/keep_alive_timeout =60
- icm/max_conn = 500
- icm/max_sleep = 2000
- icm/max_threads = 50
But I don't know what is the good parameter and if there is a relation beetween them.
Are there rules to determinate this times ?
Thank you for your answers.
Best regards
cesario

Hi,
please refer to the note 636906. The problem might be caused by the volume of data in your R/3 system.
You may also increase the timeout in the ICM parameters of CRM WAS.
Regards, Gerhard

RFC2SOAP error : connection to partner 'loopback:0' broken / CPIC-CALL:

Similar Messages

Maybe you are looking for