RFCDEST parameter?

Hello,
I have created a ABAP report in R/3 which calls the function module ZBW_RAISE_EVENT in BW ( DEV )
Following is the code of the ABAP report:
===================================
parameters: rfcdest NO-DISPLAY like rfcdisplay-rfcdest DEFAULT 'BWDCLNT200' .
parameters: zevent NO-DISPLAY like tbtco-eventid.
*rfcdest = 'BWDCLNT200'.
zevent = 'TEST'.
call function 'ZBW_EVENT_RAISE'
destination rfcdest
exporting
eventid = zevent
EXCEPTIONS
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
OTHERS = 5.
=================================
This code works fine.
My question is - when I transport this code to QA, how do I make it look for the appropriate "RFCDEST" BW client?
I promise to reward points.
Thanks for your time and help.
Pramod.

parameters: rfcdest NO-DISPLAY like rfcdisplay-rfcdest DEFAULT 'BWDCLNT200' .
parameters: zevent NO-DISPLAY like tbtco-eventid.
INITIALISATION.
case sy-sysid.
when 'dev'.
rfcdest = 'BWDCLNT200'.
when 'qa'.
rfcdest = 'BWQCLNT200'.
when 'prd'.
rfcdest = 'BWPCLNT200'.
endcase.
You can further segregate based on parameter sy-mandt which is client.
hope this helps.
A
NOTE: Table RFCTRUST has only trusted destinations.

Similar Messages

RFCDEST parameter in ABAP Report

Hello,
I have created a ABAP report in R/3 which calls the function module ZBW_RAISE_EVENT in BW ( DEV )
Following is the code of the ABAP report:
===================================
parameters: rfcdest NO-DISPLAY like rfcdisplay-rfcdest DEFAULT 'BWDCLNT200' .
parameters: zevent NO-DISPLAY like tbtco-eventid.
*rfcdest = 'BWDCLNT200'.
zevent = 'TEST'.
call function 'ZBW_EVENT_RAISE'
destination rfcdest
exporting
eventid = zevent
EXCEPTIONS
bad_eventid             = 1
eventid_does_not_exist = 2
eventid_missing         = 3
raise_failed            = 4
OTHERS = 5.
=================================
This code works fine.
My question is - when I transport this code to QA, how do I make it look for the appropriate "RFCDEST" BW client?
I promise to reward points.
Thanks for your time and help.
Pramod.

If rfcdest is a parameter, then you can create a variant for the program which would store the value (even if you put in a default value). The variant name can be the same on all systems (DEV, QA, and PRD) but the value of rfcdest will be different on each system.
BTW, in your program, since zevent is also a parameter, this value can be stored in the variant also, so I would remove the <b>zevent = 'TEST' code</b>, too.
Note: by coding NO DISPLAY, does this mean the parameters do not show up when the program is called directly? If so, I do not know if you can still create variants.
Does this help?
Message was edited by:
        Geo

DISCVR PARAMETER -- LOV ON DESC BUT RETURN CODE VALUE

HOW DOES ONE IN DISCVR PARAMETER DIALOGUE CREATE A PARAMETER (SIMILAR TO ORACLE REPORT BUILDER, PICK CODE AND DESC -- HIDE FIRST COLUMN) WHERE THE
USER SEES THE CODE DESCRIPTION IN THE LOV BUT THE CORRESPONDING CODE VALUE IS WHAT IS RETURNED TO THE PARAMETER BIND VARIABLE ??

And now Version 2.
I didn't put this into the 1st post as the formatting goes bonkers.
#>> Start of VERSION 2
call function 'MY_FUNCTION_MODULE'
       destination RFCDEST
       starting new task 'taskname'
       performing receive_result on end of task
       tables
            orders_list          = t_orders_packet
            apo_orders_list      = t_apo_orders
            apo_resources        = t_apo_resources
       exceptions
            COMMUNICATION_FAILURE    = 1 MESSAGE MSG_TEXT
            SYSTEM_FAILURE           = 2 MESSAGE MSG_TEXT
            NO_ORDERS_SUPPLIED       = 3
            NO_PEGGED_ORDERS_FOUND   = 4
            ORDERID_CONVERSION_ERROR = 5
            OTHERS                   = 6.
WAIT UNTIL results_received = 'X' UP TO 60 SECONDS.
if sy-subrc is initial.   << Now this is always ZERO
* do some stuff as RC was 0
else.
* log non-zero return code etc
endif.
FORM receive_result USING iv_taskname.
RECEIVE RESULTS FROM FUNCTION 'MY_FUNCTION_MODULE'
       tables
            orders_list          = t_orders_packet
            apo_orders_list      = t_apo_orders
            apo_resources        = t_apo_resources
       exceptions
            COMMUNICATION_FAILURE    = 1 MESSAGE MSG_TEXT
            SYSTEM_FAILURE           = 2 MESSAGE MSG_TEXT
            NO_ORDERS_SUPPLIED       = 3
            NO_PEGGED_ORDERS_FOUND   = 4
            ORDERID_CONVERSION_ERROR = 5
            OTHERS                   = 6.
results_received = 'X'.
endform.                    "receive_result
* < End of Version 2

Logical AND in MDX Reporting Services Parameter

Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGS

Hi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral

Report RFKLBU10: Missing Parameter for Logical filename in Release ERP 2005

Hello Experts,
Report RFKLBU10 in Sap Release 4.6c hat a parameter "Old dataset logical name".
The new version of this report in SAP Release ERP 2005 there is no such parameter.
Is this a SAP-Bug ?
Best regards,
Mike

There are no Export or Print events accessible for the viewer
Since it sounds like you are creating the reportdocument object in your click event, the settings on this object become out of scope on successive postbacks executed by other events.
to get around this without major changes, you can place your "report" object in session in this event and retrieve it from session on successive postbacks. This should solve your problems around navigation, printing and exporting. What you will need to do is check if the session object exists (usually in page_load or page_initialze) and if so, retrieve it from session and bind it to the viewer's reportsource. If the session object does not exist, then do nothing (ie you have not clicked your button yet that retrieves the parameter values from session and loads the report). Also, in your click event you can check if the report session object exists and if so, remove it so that it can be re-created with your new parameter values (ie i'm assuming the only time you want to set parameter values is in this event).
Dan

Unable to capture the parameter values from a PL/SQL procedure

hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
     rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
     dbms_output.put_line('The error is ' ||err_cd);
     dbms_output.put_line('The error is ' ||err_txt);
     dbms_output.put_line('The cntr is ' ||cntr_var);
     for incr in 1 .. OUT_SIGN_TAB.count
     loop
     cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............

We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2    err_cd varchar2(1000);
3    err_txt VARCHAR2(5000);
4    no_of_recs number;
5    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6    cntr_var number:=0;
7 begin
8    -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9    dbms_output.put_line('The error is ' ||err_cd);
10    dbms_output.put_line('The error is ' ||err_txt);
11    dbms_output.put_line('The cntr is ' ||cntr_var);
12    for incr in 1 .. OUT_SIGN_TAB.count
13    loop
14      cntr_var := cntr_var + 1 ;
15      Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16    end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob.

Unable to capture value inside parameter T_LFBK of FK03 in display mode

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Cannot assign an empty string to a parameter with JDBC type VARCHAR

Hi,
I am seeing the aforementioned error in the logs. I am guessing its happening whenever I am starting an agent instance in PCo. Can somebody explain whats going on?
Regards,
Chanti.
Heres the complete detail from logs -
Log Record Details
Message: Unable to retreive path for , com.sap.sql.log.OpenSQLException: Failed to set the parameter 1 of the statement >>SELECT ID, PARENTID, FULLPATH, CREATED, CREATEDBY, MODIFIED, MODIFIEDBY, REMOTEPATH, CHECKEDOUTBY FROM XMII_PATHS WHERE FULLPATH = ? <<: Cannot assign an empty string to a parameter with JDBC type >>VARCHAR<<.
Date: 2010-03-12
Time: 11:32:37:435
Category: com.sap.xmii.system.FileManager
Location: com.sap.xmii.system.FileManager
Application: sap.com/xappsxmiiear

Sounds like a UI browsing bug (when no path is selected from a catalog tree folder browser) - I would suggest logging a support ticket so that it can be addressed.

Replacing NULL and EmptyString('') with "Unknown" in SSRS parameter dropdown

All,
What I want to do is, in the SSRS parameter drop down, instead of showing NULL and Blank values(), i want to categorize them as "Unknown", so, if the user selects "Unknown" from the SSRS drop down parameter, he should be able to see all
the records that have NULL values or empty strings in that particular column in the result set.
Can you tell me, how should I handle it in my main stored proc as well as in the dataset?
Right now, i have something like this:
Where
(t1.name in (select value from dbo.Split(@TName,',')) OR @TName IN ('All'))
-- Where t1.Name has empty strings and NULL values. Both of these values should be categorized under "Unknown"
-- How would the dataset query look like? Right now I have this query for populating the drop down for that parameter:
Select All
UNION
Select Distinct Name
Order BY 1

Hello,
Please refer to the following stored procedure:
SELECT
CASE WHEN TName IS NULL OR TName = ''
THEN 'Unknown' ELSE TName END AS TName
From DemoTable
Then, use following query code to get the parameter values:
SELECT Distinct
CASE WHEN TName IS NULL OR TName = '' THEN 'Unknown'
ELSE TName END AS TName
FROM DemoTable
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Host parameter null and convert SOAP to HTTPUrl

Hi,
We are trying to fire a SOAP request and print the response but its throwing this error
Exception in thread "main" java.lang.IllegalArgumentException: host parameter is null
The piece of code is:
HttpClient hc = new HttpClient();
System.out.println("Came here");
int iResultCode = hc.executeMethod(post);
executeMethod(post) is failing but when I print the value of post, its �org.apache.commons.httpclient.methods.PostMethod@fd54d6�
Can anybody throw some light on this error and how to solve it??
Also, there�s another issue.
We are upgrading from Weblogic 7.2 to 9.1
Earlier we were able to pass the request and get the response in HTTPUrl form but now after upgrading, its getting passed in SOAP format. Is there any way to bypass the SOAP and get it in HTTPUrl format or what are the configurations to be made to adapt to the SOAP format?
connection =(HttpURLConnection) url.openConnection();
This line was returning HTTPUrl format, now its coming in SOAP format

your PostMethod takes the Url as the parameter. Check you are using the proper URl i.e like http://host:port/name?params like that

SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE

Hello Experts,
Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive. I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when checking transformations.
Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error. And more TYPE is availalbe tys_TG_1_full. This type does not have 3 fields.
Please advice.
Thanks in advance.
Regards
Venkata.

Hello Rathy,
I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
Thanks for the input and points assigned.
Regards
Venkata Agraharam.

SSRS 2012: How to get a "Select All" that returns NULL instead of an actual list of all values from a multi-select parameter?

I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- Mark

I adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ","))

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Report parameter field value has a single quote. need to escape before pass

Report has a parameter whose value might have a single quote in it. If I pass that value directly into the SQL Command... like
where ... user_name = {?parm_user_name}...
which would translate to
user_name='O'Donnel Honda'
I am getting an error... so would like to convert this parameter value into 'O''Donnel Honda' before passing into the query.
I created a formula called parse_user_name with following:
Replace ({?parm_user_name}, "'", "''")
And used in the query like
where ... user_name = {@parse_user_name}...
I am getting an error like invalid SQL92 character...

I think you should use the condition like this
where ... user_name = '{?parm_user_name}'
keep the parameter in single quote at the command level itself.
Now use the same formula like
replace({?Parameter},"'","''")
This works only if the parameter is a single value parameter but not multi value parameter.
Regards,
Raghavendra

Discoverer Report parameter based on subquery

Hi Guys,
I have following query which i need to convert into discoverer report
select hpah.EMPLOYEE_NUMBER,hpah.FIRST_NAME,hpah.LAST_NAME,hpah.PERSON_NAME,
--hpah.JOB_NAME,hpah.ASSIGNMENT_ORGANIZATION_NAME,
hpah.ASSIGNMENT_TYPE,hpah.USER_ASSIGNMENT_STATUS,
SUBSTR(pj.name, 1, instr(pj.name, '.', 1, 2) -1) job_code,
SUBSTR(pj.name, instr(pj.name, '.', 1, 2) + 1) job_title,
(select haou.ATTRIBUTE1 from hr_all_organization_units haou
where haou.ORGANIZATION_ID = hpah.ASSIGNMENT_ORGANIZATION_ID ) Function,
(select haou.ATTRIBUTE2 from hr_all_organization_units haou
where haou.ORGANIZATION_ID = hpah.ASSIGNMENT_ORGANIZATION_ID ) org_desc,
SUBSTR(hpah.ASSIGNMENT_ORGANIZATION_NAME, 1, 6) dept_code,
SUBSTR(hpah.ASSIGNMENT_ORGANIZATION_NAME, 7, LENGTH(hpah.ASSIGNMENT_ORGANIZATION_NAME)) dept_title,
hpah.GRADE_NAME,hpah.LOCATION_NAME,hpah.SUPERVISOR_NAME,
hpah.PERSON_START_DATE,hpah.ORIGINAL_DATE_OF_HIRE ,
hpah.SALARY_BASIS,hpah.BUSINESS_GROUP_ID,hpah.ASSIGNMENT_ID,
decode( hpah.SALARY_BASIS, 'ANNUAL', ppp.proposed_salary_n,
'HOURLY', (ppp.proposed_salary_n *2080),
ppp.proposed_salary_n
) salary,
sysdate run_date
from
hrfg_person_assignment_history hpah ,
per_pay_proposals ppp,
per_pay_bases ppb,
per_grades pg,
per_jobs pj
where hpah.ASSIGNMENT_ID = ppp.ASSIGNMENT_ID
and hpah.SALARY_BASIS = ppb.PAY_BASIS
and hpah.BUSINESS_GROUP_ID = ppb.BUSINESS_GROUP_ID
and hpah.GRADE_ID = pg.GRADE_ID(+)
and hpah.JOB_ID = pj.JOB_ID (+)
--and hpah.EMPLOYEE_NUMBER = 100779
and hpah.PERSON_START_DATE IN
(SELECT MAX(hpah2.PERSON_START_DATE)
FROM hrfg_person_assignment_history hpah2
WHERE hpah2.EMPLOYEE_NUMBER = hpah.EMPLOYEE_NUMBER
AND hpah2.PERSON_START_DATE <= sysdate )
order by hpah.EMPLOYEE_NUMBER
i need to have sysdate as parameter in my report. I want data based on the date i provide.
how can i make this as an parameter?

Hi Prashant,
Subqueries are not Supported in Conditions..As of Disco Plus Rel 10.1.2.54.25
A plausible workaround can be:
1. Create a View with foll. Query
create or replace view TEST_VIEW as
select hpah.EMPLOYEE_NUMBER emp_no,hpah.FIRST_NAME,hpah.LAST_NAME,hpah.PERSON_NAME,
--hpah.JOB_NAME,hpah.ASSIGNMENT_ORGANIZATION_NAME,
hpah.ASSIGNMENT_TYPE,hpah.USER_ASSIGNMENT_STATUS,
SUBSTR(pj.name, 1, instr(pj.name, '.', 1, 2) -1) job_code,
SUBSTR(pj.name, instr(pj.name, '.', 1, 2) + 1) job_title,
(select haou.ATTRIBUTE1 from hr_all_organization_units haou
where haou.ORGANIZATION_ID = hpah.ASSIGNMENT_ORGANIZATION_ID ) Function,
(select haou.ATTRIBUTE2 from hr_all_organization_units haou
where haou.ORGANIZATION_ID = hpah.ASSIGNMENT_ORGANIZATION_ID ) org_desc,
SUBSTR(hpah.ASSIGNMENT_ORGANIZATION_NAME, 1, 6) dept_code,
SUBSTR(hpah.ASSIGNMENT_ORGANIZATION_NAME, 7, LENGTH(hpah.ASSIGNMENT_ORGANIZATION_NAME)) dept_title,
hpah.GRADE_NAME,hpah.LOCATION_NAME,hpah.SUPERVISOR_NAME,
hpah.PERSON_START_DATE,hpah.ORIGINAL_DATE_OF_HIRE ,
hpah.SALARY_BASIS,hpah.BUSINESS_GROUP_ID,hpah.ASSIGNMENT_ID,
decode( hpah.SALARY_BASIS, 'ANNUAL', ppp.proposed_salary_n,
'HOURLY', (ppp.proposed_salary_n *2080),
ppp.proposed_salary_n
) salary,
sysdate run_date
from
hrfg_person_assignment_history hpah ,
per_pay_proposals ppp,
per_pay_bases ppb,
per_grades pg,
per_jobs pj
where hpah.ASSIGNMENT_ID = ppp.ASSIGNMENT_ID
and hpah.SALARY_BASIS = ppb.PAY_BASIS
and hpah.BUSINESS_GROUP_ID = ppb.BUSINESS_GROUP_ID
and hpah.GRADE_ID = pg.GRADE_ID(+)
and hpah.JOB_ID = pj.JOB_ID (+)
--and hpah.EMPLOYEE_NUMBER = 100779
order by hpah.EMPLOYEE_NUMBER
2. Create another table say TEST_TAB
create table TEST_TAB (emp_no, start_dt) as
SELECT hpah2.EMPLOYEE_NUMBER , MAX(hpah2.PERSON_START_DATE) PERSON_START_DATE
FROM hrfg_person_assignment_history hpah2
GROUP BY hpah2.EMPLOYEE_NUMBER
3. Add both of them in Disco Admin and create a join between TEST_VIEW.emp_no and TEST_TAB.emp_no
4. Bring both these Objects in a new report in Disco Plus
5. Create a New Parameter (Base it on PERSON_START_DATE Col of TEST_TAB)
6. Choose Option Create Condition with operator <=
7. Checkmark "Require User to Enter a Value
8. Execute Report
I believe this should work. Either ways let me know if it helps or u get another workaround. (This scenario looks quite interesting)
Thanks,
Chinmay

RFCDEST parameter?

Similar Messages

Maybe you are looking for