RFID healthcare system, used for error prevention with RFID wrist band

RFID systems can be used in a wide range of application since it provides an efficient and reliable means for identification. RFID technology, which is remarkably versatile enabling in many uses level, will be rapidly and widely used in healthcare.
Do you find it a headache to manage the patients in hospital ? Do you need to use great effort to identify and keep track of the newborn babies ? RFID technology for healthcare,which will benefit the healthcare in a huge number of ways including error prevention of identifying wrong person by staff and make the record of patientsu2019 information a piece of cake, may help to figure out the above problems.
Surveys by the National Patient Safety Agency (NPSA) have shown that errors in identifying patients lead to at least 500 a week getting the wrong treatment. In the wake of the healthcare incidents result from identification errors, voluntary cooperation within hospitals and between nations has a vital part to play. As a result, RFID technology for healthcare utilization to people tagging in hospital is in the ascendant.
RFID is an enabling technology that saves lives, prevents errors, saves costs and increases security. It removes tedious procedures and provides patients with more freedom and dignity.
The use of RFID offers automatic capture of identification data with great range, data capacity and read/write capabilities.
Once a person is attached with a RFID wrist band of DAILY RFID(company name), with a RFID reader got close to the wrist band, without burrowing under the bedclothes, the identification data of each person u2019s information will be automatic captured by the chip of the wrist band. And personal data stored in an RFID-fed server behind a firewall is far more secure than the clipboard at the end of a bed, so as to decrease the risk of mislaying the patientsu2019 data. Whatu2019s more, there are no worries about electrically interfering with other electronics such as life support systems,because the RFID wrist band of DAILY RFID is a passive one, which use the RFID reader as a source of power,instead of a battery.
The DAILY RFID(company name) series includes RFID tags for almost any application. For a full catalog of DAILY RFID durable RFID tag, kindly visit http://www.rfid-in-china.com/products_669_1.html.
Edited by: Jack Pan on Sep 16, 2008 3:46 PM

Similar Messages

How to create a full system image for Solaris 10 with ZFS

Dear friend,
could you please advice which way to create a full system image for Solaris 10 with ZFS is trusted and practically used?
I'm searching the analogy like Norton Ghost or Acronis True Image but with ZFS support.
I have x86 server Sun Netra X4270.
Thanks in advance,
Dina

One more question Filip,
is it correct, that I should make 2 separate backup for ispool and rpool?
And is it important in which order to restore them from backup?
bash-3.2# zpool list
NAME    SIZE ALLOC   FREE CAP HEALTH ALTROOT
ispool 136G 8.08G   128G   5% ONLINE -
rpool   136G 44.1G 91.9G 32% ONLINE -
bash-3.2# zfs list
NAME                             USED AVAIL REFER MOUNTPOINT
ispool                          8.08G   126G    31K /ispool
ispool/iserver                  8.08G   126G 8.08G /export/home/iserver
rpool                           44.4G 89.5G 46.5K /rpool
rpool/ROOT                      39.1G 89.5G    31K legacy
rpool/ROOT/firstbe              39.1G 89.5G 14.1G /
rpool/ROOT/firstbe/export       20.1G 89.5G    32K /export
rpool/ROOT/firstbe/export/home 20.1G 89.5G 20.1G /export/home
rpool/ROOT/firstbe/opt           651M 89.5G   133M /opt
rpool/ROOT/firstbe/opt/SMAW      518M 89.5G   518M /opt/SMAW
rpool/ROOT/firstbe/usr          3.45G 89.5G 3.45G /usr
rpool/ROOT/firstbe/var           867M 89.5G   867M /var
rpool/dump                      1.00G 89.5G 1.00G -
rpool/swap                      4.25G 89.8G 4.00G -
Br,
Dina

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
Allan

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

Need help for equipments for java card with RFID technology .

I 'm doin a project using java card with RFID technology.Can ne one give me exact equipments for java card reader & writer for RFID technology?
I need to buy these things from UK.Can ne one provide me some product list & as well as the exact pricelist?
plz reply me asap.

I 'm doin a project using java card with RFID
technology.Can ne one give me exact equipments for
r java card reader & writer for RFID technology?I guess with "RFID" you are referring to "contact-less javacards"?
If yes, one keyword for you is "Mifare", a industry standard for smartcards with dual interface (contact-based and contactless).
Jan

FM used for error log

Hi experts,
I would like to ask if you happen to kmow an alternative FM to 'SMPO_DISPLAY_MESSAGES'.
The thing is I'm using error log in my program and I configure it so that there is just a pushbutton in the ALV. Once the button is pushed, the error encountered in the execution of the program will show.
Using FM 'SMPO_DISPLAY_MESSAGES' would show the pop-up for errors while executing the program and not after execution.
If you happen to know any alternative for this FM, it would really help.
Thanks in advance.
Jen

Use below FMs
BAL_LOG_CREATE
BAL_LOG_REFRESH
BAL_LOG_MSG_ADD
BAL_DSP_LOG_DISPLAY
reward if useful

WADK components & setting used for power management with answer file for windows 8.1 ent

hello,
I have to deploy windows 8.1 ent device with MDT answer file related to power management with customized following settings:
High performances
sleep timeout settings
standby or sleep and hibernate setting
Enable critical battery task.
But don't know
1. how to manage power settings using answer file (WADK) for win8.1.
2. which OS Windows image component and setting used for power management in WADK.
Thanks
Richa Km

The way I do it with my task sequences (this works with MDT as well as SCCM) is to have an exported power plan using the POWERCFG -EXPORT command. I create a software package around the resulting *.POW file with a command do do an POWERCFG -IMPORT.
I then issue a POWERCFG -SETACTIVE command to the GUID of the *.POW file to enable that power scheme.
More information on the POWERCFG command can be found here:
https://technet.microsoft.com/en-us/library/cc748940%28v=ws.10%29.aspx
Hope that helps,
Darth.Mongo

Using the error routines with custom errors...

How do I cause the error handlers to recognize a custom error? I used
this page
(http://zone.ni.com/devzone/conceptd.nsf/webmain/DE4F036F22C4B9F286256FEE0010B6FD)
to create custom error codes but now how do I raise one while a VI is
running?
Thanks,
Dave

Hi Dave,
All you need to do is wire an error cluster with a 'status' of True and one of your custom error codes as the 'code' into the General Error Handler VI, and it should pop up an error dialog with your custom error specified.
If you're still having trouble, let me know.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

What version of microsoft office i should use for my ibook with 700mhz?

I have an ibook G3
Im not sure which microsoft office I should use.
I bought the 2008 one but i noticed its not compatible.
My ibook G3 has...
-700 MHz PowerPC G3
-640 MB SDRAM
Im guessing Microsoft Office 2004 but im not really sure.

Yes, that should do (if you are running Mac OS X 10.2.8 or later).
Check out the system requirements for Microsoft Office 2004 for Mac at Amazon.com.

How to use For-Each Structure with Multiple node XML structure

Hi,
How to use for-each (BPEL 2.0) construct for Multinode XML structure.
Here is the easy case: I have list of suppliers specified by supplier
<supplierList>
<supplier>1</supplier>
<supplier>2</supplier>
<supplier>3</supplier>
</supplierList>
Now there is a web service http://hostname/getsupplierdetails/wsdl which accepts one supplier at a time.
like
<supplier>1</supplier>
reponse object is
<message> notfound/found </message>
But how can I use for each of XML node to call this service and collect the result like
<supplierList1>
     <Suppinfo>
        <supplier>1</supplier>
        <message> not found</message>
</suppinfo>
    <suppinfo>
        <supplier>1</supplier>
        <message> not found</message>
</suppinfo>
</supplierlist1>
Thanks

For looping you use foreach loop and , loop for the number of occurences and when constructing response, adding a new element you have to use bpelx:append. Good sample at Enterprise Integration: Oracle SOA Suite 11g: Populating a list or an array in BPEL without using XSLT.

Error connecting GSM Modem with system using java (error no is 20)

hi!
I'm new to jms, i want to send sms using GSM Modem.I used sony Ericsion mobile. I got one sample application , when i run it thows the following exceptions.
Feb 27, 2008 4:31:27 PM org.jsmsengine.CSerialDriver open
INFO: Connecting...
Feb 27, 2008 4:31:28 PM org.jsmsengine.CSerialDriver close
INFO: Disconnecting...
Connection to mobile failed, error: -20
i used the following code
import org.jsmsengine.*;
class SendMessage
public static void main(String[] args)
int status;
// Create jSMSEngine service.
CService srv = new CService("COM6",9600);
System.out.println();
System.out.println("SendMessage(): sample application.");
System.out.println(" Using " + srv._name + " " + srv._version);
System.out.println();
try
// Initialize service.
srv.initialize();
// Set the cache directory.
srv.setCacheDir(".");
// Set the phonebook.
// srv.setPhoneBook("../misc/phonebook.xml");
// Connect to GSM device.
status = srv.connect();
// Did we connect ok?
if (status == CService.ERR_OK)
// Set the operation mode to PDU - default is ASCII.
srv.setOperationMode(CService.MODE_PDU);
// Set the SMSC number (set to default).
srv.setSmscNumber("");
// Print out GSM device info...
System.out.println("Mobile Device Information: ");
System.out.println(" Manufacturer : " + srv.getDeviceInfo().getManufacturer());
System.out.println(" Model : " + srv.getDeviceInfo().getModel());
System.out.println(" Serial No : " + srv.getDeviceInfo().getSerialNo());
System.out.println(" IMSI : " + srv.getDeviceInfo().getImsi());
System.out.println(" S/W Version : " + srv.getDeviceInfo().getSwVersion());
System.out.println(" Battery Level : " + srv.getDeviceInfo().getBatteryLevel() + "%");
System.out.println(" Signal Level : " + srv.getDeviceInfo().getSignalLevel() + "%");
// Create a COutgoingMessage object and dispatch it.
// *** Please update the phone number with one of your choice ***
COutgoingMessage msg = new COutgoingMessage("+919830645175", "Ripon");
// Character set is 7bit by default - lets make it UNICODE :)
// We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
// this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
// Disconnect from GSM device.
srv.disconnect();
else System.out.println("Connection to mobile failed, error: " + status);
catch (Exception e)
e.printStackTrace();
System.exit(0);
In my jre path i added win32.dll to use comm.jar
please help me

Thanks so much; you just helped me fit together the last few pieces of this puzzle. I did a little more digging and found a [url http://support.webecs.com/KB/a375/how-do-i-configure-sql-server-express-to-allow-remote.aspx]knowledge base article that explains how to set a static TCP port. According to the article, SQL Server 2005 selects a random dynamic port on installation, and my experience bears out the fact that it does survive server reboots.
TheAvalanche wrote:
If you don't want that, make sure the SQL Server Browser service is running and connect to your SQL Server using the instance name, and not use a port in the JDBC-url.
BTW: I am not sure if jtds supports usage of the browser service, the Microsoft SQL Server JDBC drivers since version 1.2 (I think) do.It would appear that jTDS doesn't support the browser service, at least not by default, because I tried using the instance name rather than the port to connect (along with just about every other possible combination) and it didn't work. In my opinion, using a static port makes a lot more sense anyway, since you don't have to rely on the browser service, and you'll always know what port to set in your firewall exceptions. (For anyone out there wondering about firewall exceptions, in addition to the static port for the server, an exception has to be created for the browser on UDP 1434 if you're going to use it, which most programs apparently do.)
Once again, thanks for all the good information!
Edited by: javadecaf on May 27, 2011 8:03 AM
Insert link button on toolbar generated link syntax that doesn't work: text. What's up with that?

Would like to use software once used for WINDOS XP with new computer system

Have software on CD that was meant originally for WINDOWS XP on my new computer that has Windows 7 Home Premium pre-installed.
Anita De Lois

AADE18, welcome to the forum.
I have used XP software with Win 7. Here is a guide to help you if you have a licensed copy of Win XP.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Conversion of Logical System name for "Error DTP" is not working

Hi All,
I have created a DTP and corresponding "Error DTP" for handling the Error records in development.
But when i move the both the DTP's to Consilidation systems,
DTP is getting converted to the consolidation R/3 systems (Example: TQS).
But the "Error DTP" is not getting converted with the source systems as R/3 cosolidation systems (TQS) and remains as source systems as Development R/3 system(TDS).
We are in BI 7.0 version with SP level of 13.Can anyone help how to resolve this issue? or any OSS note available to resolve this issue.
Thanks,
Muruganand.K

Closing Thread.

The iOS update methods I use for error free updates

I hope this helps some folks. I am not saying this is the 100% tried and true method but I have upgraded quite a few iPhones and never experienced an error or issue upgrading the software when following below method.
1) If iOS 4 or greater, double-tap Home button to bring up running app list and hold first app to get jiggling and kill all apps one at a time until task bar is blank.
2) Put iPhone into Airplane mode. (this will ensure that an incoming phone call, text message or push message won't interrupt the update)
3) Do a graceful power-off by holding Top sleep button until red "slide to power off" then slide to power phone off and allow phone to fully shut down.
4) Now press and hold Top sleep button and Home button at same time and continue holding both. The phone will begin to boot and you will see Apple logo but while continuing to hold both buttons the Apple logo will eventually go away and phone will seem to power back off but KEEP HOLDING BOTH BUTTONS and phone will power up again and Apple logo will popup again. KEEP HOLDING BOTH BUTTONS and phone will power down for good this time. When you release both buttons the phone should stay powered off. If phone begins to boot/power up when releasing buttons, you have not held them long enough. (Note: This power off/reboot sequence is very handy to remember for when your iPhone starts acting weird.)
5) Press Top sleep button to turn phone back ON.
6) Hook to your computer and Sync with iTunes and also create a Backup of phone in iTunes.
7) Now update your phone with the iOS update and it should run smoothly.
Thanks goes out to "TITNTUFF" for suggesting the Airplane Mode.

The method i use is this, every new update apple comes out with, i always DFU mode my iphone, and do a clean install of the iOS. This to ensure that I don't get any problems when updating my iphone. I have done this all previous models and never had any issues.
DFU will take some time but for me it's worth it. Airplane mode is a good way to this.

Fix for Error 1417 with new itunes 7

This worked for me when I got that unknown error - 1417 (can't update ipod)
Step 1: Disable all third party programs and services via MSCONFIG
Article with step by step instructions found here:
http://docs.info.apple.com/article.html?artnum=302538
Step 2: Restart the computer
Step 3: Uninstall quicktime through the control panel in add/remove programs
Step 4: Uninstall itunes through the control panel in add/remove programs
Step 5: Uninstall any/all ipod updaters or ipod for window software through the control panel in add/remove programs
Step 6: Delete program file folders for itunes and quicktime:
--On the Start menu, click My Computer (or double-click My Computer on the Desktop).
--In My Computer, open Local Disk. (C Drive)
--Open Program Files.
--Right-click on the iTunes folder and click Delete from the shortcut menu.
--Right-click on the QuickTime folder and click Delete from the shortcut menu.
--Open the iPod folder.
--Right-click on the bin folder and click Delete from the shortcut menu. Note: If you are unable to delete the \Program Files\iPod\bin folder, see the "iPodService.exe Alert" section below.
--Navigate to C:\Windows\system32\.
--Remove the files QuickTime.qts and QuicktimeVR.qtx.
Step 7: Restart computer
Step 8: Install STANDALONE version of quicktime at:
http://www.apple.com/quicktime/download/standalone.html
Note: if you get an error on this page about an error occuring, just refresh. It should load. Also, there are TWO download options... one with itunes 7 and one without. You want the one without itunes.
Step 9: Restart computer
Step 10: Install itunes 7:
http://www.apple.com/itunes/download
Step 11: Restart computer
Step 12: Run itunes. You should be able to update and sync your ipod after this and no longer get that pesky 1417 error.
Also, after you have resolved the issue please see the bottom of the msconfig article for instructions on configuring windows to load your normal startup options again.

It seems like almost everybody is having this exact same problem. I bought a Nano for my wife and a iPod Photo for myself. Syncing does not work on either one and from what I read on these boards it doesn't work for most customers. Apple really needs to fix this soon.

RFID healthcare system, used for error prevention with RFID wrist band

Similar Messages

Maybe you are looking for