RFM to get System:Component information?

In SAP GUI, under 'System | Status | Components', you see information on the components installed in your system, including Software Component, Release, Level, Highest Support Package, and a Description.
What RFM (RFC) can I call to get that information?
Thanks.
Tim

Hello Tom,
the fm is also available in our 4.6C system. Could you provide some more informations regarding your release.
Think that the rfc is part of the solution manager installation (as the development class is named "Solution manager").
I didn't find another rfc delivering the data. There are only some function modules (w/o rfc flag). Perhaps you can have a look at these fm's (starting with OCS* or SPAM*, e.g. SPAM_READ_PAT03). If one of these delivers the required data, you can modify the fm by setting the rfc flag, or copy it.
Nevertheless, it should be no problem to develop an own rfc, providing the information from database tables UVERS and PAT03.
Best regards
Stephan
Edited by: Stephan Theis on Feb 26, 2008 8:35 AM

Similar Messages

  • Listing system component information

    I'd like to be able to get (and then display) the system component information in my .NET program using the .NET connector. 
    (The information contained within System->Status...->Component Information)
    Any idea on how to get this info?
    (More generally, I find that I often run into the problem of "how do I do xyz"-- and I wonder if there is an RFC to do this somewhere-- and then I spend forever looking for one, sometimes finding what I'm looking for and sometimes not.   Is there a "recommended" way of "finding stuff"?)

    Hello Tom,
    the fm is also available in our 4.6C system. Could you provide some more informations regarding your release.
    Think that the rfc is part of the solution manager installation (as the development class is named "Solution manager").
    I didn't find another rfc delivering the data. There are only some function modules (w/o rfc flag). Perhaps you can have a look at these fm's (starting with OCS* or SPAM*, e.g. SPAM_READ_PAT03). If one of these delivers the required data, you can modify the fm by setting the rfc flag, or copy it.
    Nevertheless, it should be no problem to develop an own rfc, providing the information from database tables UVERS and PAT03.
    Best regards
    Stephan
    Edited by: Stephan Theis on Feb 26, 2008 8:35 AM

  • Get system connect information in WAD

    Dear All,
         I need using Javascript get system connect information in WAD,and using the connect information call RFC,How to do it?

    by myself

  • I want to get system hardware information

    I want to get system hardware information like
    processor serial no mac address etc using preferebly in java.

    Hi,
    If U want the hardware information in unix machine sysdef,uname -p for info on the processor,ifconfig -a for ip and mac address ,netmask.

  • Support Pack Status not updated in System Component Information

    Hi Experts,
                 We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4  were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
        Any idea what are we missing?  Any help is greatly appreciated.
    Thanks
    Suhail

    For future referers, Vistex says its a known issue.
    Hello,
    It is a known issue but it would not impact any of the functionality.
    It can only be fixed in the subsequent release with conjunction with
    SAP.
    Thanks,
    Vistex Support

  • Accessing Component Information for systems connected to Solution Manager

    We currently aggregate system component information for our ABAP systems through the following manual (and tedious) process:
    Log into each ABAP system
    Menu:  System -> Status
    Click Component Information button (magnifying glass icon)
    Retrieve the information:  Component, Release, Level, Support Package Name, Description.
    Recently, we were drilling through Solution Manager Root Cause analysis -> Change reporting and noticed that this information is available for each system.  In the ABAP-Software data store.  This led us to consider if this information is contained within the Solution Manager BW cubes.
    However when we looked at the SMD Change Analysis (thinking this would map to what we saw in the Change Analysis reporting), we didn't see this information.
    So, the question is, does anyone have any thoughts were the Component information for systems is stored in Solution Manager?  Ideally, we would like to tap into this source for our own custom report as opposed to retrieving it manually from each system as I described.
    Thanks,
    Jeff Henke

    Hi Jeff,
    the information about software components (and this is I think what you are looking for) is stored in the LMDB of Solution Manager. Each satellite system sends its component info into SLD (either in an external system or in Solution Manger itself). From there it is redirected to LMDB.
    Try transaction LMDB in Solution Manager. There you have (depending on your SP-Stack) access to several reports to evaluate your landscape.
    Best regards, Alexander

  • Windows Server 2012 - Hyper-V - Cluster Sharded Storage - VHDX unexpectedly gets copied to System Volume Information by "System", Virtual Machines stops respondig

    We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
    Our setup:
    Hosts - Both run Windows Server 2012 Standard and are clustered.
    HP ProLiant G7, 24 GB RAM. This is the primary host and normaly all VMs run on this host.
    HP ProLiant G5, 20 GB RAM. This is the secondary host that and is intended to be used in case of failure of the primary host.
    We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched off.
    iSCSI SAN:
    QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
    Switch:
    DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
    Virtual Machines:
    3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
    1 Windows Server 2008 Standard Exchange Server.
    All VMs are using dynamic disks (as recommended by Microsoft).
    Updates
    We have applied the most resent updates to the Hosts, VMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
    Normal operation:
    Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with two 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
    we see speeds up to 400 Mbit/s of combined read/write for instance during file repair.
    Our Problem:
    Our problem is that for some reason a random VHDX gets copied to System Volume Information by "System" of the Clusterd Shared Storage (i.e. C:\ClusterStorage\Volume1\System Volume Information).
    All VMs stops responding or responds very slowly during this copy process and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
    This happens at random and not every day and different VHDX files from different VMs gets copied each time. Some time it happens during daytime wich causes a lot of problems, especially when a 200 GB file gets copied (which take a lot of time).
    What it is not:
    We thought that this was connected to the backup, but the backup had finished 3 hours before the last time this happended and the backup never uses any of the files in System Volume Information so it is not the backup.
    An observation:
    When this happend today I switched on ShadowCopy (previous files) and set it to only to use 320 MB of storage and then the Copy Process stopped and the virtual Machines started responding again. This could be unrelated since there is no way to see
    how much of the VHDX that is left to be copied, so it might have been finished at the same time as I enabled  ShadowCopy (previos files).
    Our question:
    Why is a VHDX copied to System Volume Information when scheduled ShadowCopy (previous version of files) is switched off? As far as I know, nothing should be copied to this folder when this functionis switched off?
    List of VSS Writers:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2012 Microsoft Corp.
    Writer name: 'Task Scheduler Writer'
       Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
       Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
       State: [1] Stable
       Last error: No error
    Writer name: 'VSS Metadata Store Writer'
       Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
       Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
       State: [1] Stable
       Last error: No error
    Writer name: 'Performance Counters Writer'
       Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
       Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
       State: [1] Stable
       Last error: No error
    Writer name: 'System Writer'
       Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
       Writer Instance Id: {7848396d-00b1-47cd-8ba9-769b7ce402d2}
       State: [1] Stable
       Last error: No error
    Writer name: 'Microsoft Hyper-V VSS Writer'
       Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
       Writer Instance Id: {8b6c534a-18dd-4fff-b14e-1d4aebd1db74}
       State: [5] Waiting for completion
       Last error: No error
    Writer name: 'Cluster Shared Volume VSS Writer'
       Writer Id: {1072ae1c-e5a7-4ea1-9e4a-6f7964656570}
       Writer Instance Id: {d46c6a69-8b4a-4307-afcf-ca3611c7f680}
       State: [1] Stable
       Last error: No error
    Writer name: 'ASR Writer'
       Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
       Writer Instance Id: {fc530484-71db-48c3-af5f-ef398070373e}
       State: [1] Stable
       Last error: No error
    Writer name: 'WMI Writer'
       Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
       Writer Instance Id: {3792e26e-c0d0-4901-b799-2e8d9ffe2085}
       State: [1] Stable
       Last error: No error
    Writer name: 'Registry Writer'
       Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
       Writer Instance Id: {6ea65f92-e3fd-4a23-9e5f-b23de43bc756}
       State: [1] Stable
       Last error: No error
    Writer name: 'BITS Writer'
       Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
       Writer Instance Id: {71dc7876-2089-472c-8fed-4b8862037528}
       State: [1] Stable
       Last error: No error
    Writer name: 'Shadow Copy Optimization Writer'
       Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
       Writer Instance Id: {cb0c7fd8-1f5c-41bb-b2cc-82fabbdc466e}
       State: [1] Stable
       Last error: No error
    Writer name: 'Cluster Database'
       Writer Id: {41e12264-35d8-479b-8e5c-9b23d1dad37e}
       Writer Instance Id: {23320f7e-f165-409d-8456-5d7d8fbaefed}
       State: [1] Stable
       Last error: No error
    Writer name: 'COM+ REGDB Writer'
       Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
       Writer Instance Id: {f23d0208-e569-48b0-ad30-1addb1a044af}
       State: [1] Stable
       Last error: No error
    Please note:
    Please only answer our question and do not offer any general optimization tips that do not directly adress the issue! We want the problem to go away, not to finish a bit faster!

    Hallo Lawrence!
    Thankyou for youre reply, some comments to help you and others who read this thread:
    First of all, we use Windows Server 2012 and the VHDX as I wrote in the headline and in the text in my post. We have not had this problem in similar setups with Windows Server 2008 R2, so the problem seem to be introduced in Windows Server 2012.
    These posts that you refer to seem to be outdated and/or do not apply to our configuration:
    The post about Dynamic Disks:
    http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx is only a recommendation for Windows Server 2008 R2 and the VHD format. Dynamic VHDX is indeed recommended by Microsoft when using Windows Server 2012 (please look in the optimization guide
    for Windows Server 2012).
    Infact, if we use fixed VHDX then we would have a bigger problem since fixed VHDX are generaly larger then Dynamic Disks, i.e. more data would be copied and that would take longer time = the VMs would be unresponsive for a longer time.
    The post "What's the deal with the System Volume Information folder"
    http://blogs.msdn.com/b/oldnewthing/archive/2003/11/20/55764.aspx is for Windows XP / Windows Server 2003 and some things has changed since then. for instance In Windows Server 2012, Shadow Copies cannot be controlled by going to Control panel -> System.
    Instead you right-click on a Drive (i.e. a Volume, for instance the C drive/Volume) in Computer and then click "Configure Shadow Copies".
    Windows Server 2008 R2 Backup problem
    http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/0fc53adb-477d-425b-8c99-ad006e132336 - This post is about the Antivirus software trying to scan files used during backup that exists in the System Volume Information folder and we do not
    have any antivirus software installed on our hosts as I stated in my post.
    Comment that might help us:
    So according to “System Volume Information” definition, the operation you mentioned is Volume Shadow Copy. Check event viewer to find Volume Shadow Copy related event logs and post them.
    Why?
    Furhter investigation suggests that a volume shadow copy is somehow created even though the Schedule for Shadows Copies is turned off for all drives. This happens at random and we have not found any pattern. Yesterday this operation took almost all available
    disk space (over 200 GB), but all the disk space was released when I turned on scheduled Shadow Copies for the CSV.
    I therefore draw these conclusions:
    The CSV Volume has about 600 GB of disk space and since Volume Shadows Copy used 200 GB, or about 33% of the disk space, and the default limit is 10% then I conclude that for some reason the unscheduled Volume Shadow Copy did not have any limit (or ignored
    the limit).
    When I turned on the Schedule I also change the limit to the minimum amount which is 320 MB and this is probably what released the disk space. That is, the unscheduled Volume Shadow Copy operation was aborted and it adhered to the limit and deleted the
    Volume Shadow Copy it had taken.
    I have also set the limit for Volume Shadow Copies for all other volumes to 320 MB by using the "Configure Shadow Copies" Window that you open by right clicking on a drive (volume) in Computer and then selecting "Configure Shadow Copies...".
    It is important to note that setting a limit for Shadow Copy Storage, and disabaling the Schedule are two different things! It is possible to have unlimited storage for Shadow Copies when the Schedule is disabled, however I do not know if this was the case
    Before I enabled Shadow Copies on the CSV since I did not look for this.
    I now have defined a limit for Shadow Copy Storage to 320 MB on all drives and then no VHDX should be copied to System Volume Information since they are all larger than 320 MB.
    Does this sound about right or am I drawing the wrong conclusions?
    Limits for Shadow Copies:
    Below we list the limits for our two hosts:
    "Primary Host":
    C:\>vssadmin list shadowstorage
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2012 Microsoft Corp.
    Shadow Copy Storage association
       For volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
       Shadow Copy Storage volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 320 MB (91%)
    Shadow Copy Storage association
       For volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
       Shadow Copy Storage volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 320 MB (0%)
    Shadow Copy Storage association
       For volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
       Shadow Copy Storage volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 320 MB (3%)
    Shadow Copy Storage association
       For volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
       Shadow Copy Storage volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 320 MB (0%)
    C:\>cd \ClusterStorage\Volume1
    Secondary host:
    C:\>vssadmin list shadowstorage
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2012 Microsoft Corp.
    Shadow Copy Storage association
       For volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
       Shadow Copy Storage volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 35,0 MB (10%)
    Shadow Copy Storage association
       For volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
       Shadow Copy Storage volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 27,3 GB (10%)
    Shadow Copy Storage association
       For volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
       Shadow Copy Storage volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 bytes (0%)
       Allocated Shadow Copy Storage space: 0 bytes (0%)
       Maximum Shadow Copy Storage space: 6,80 GB (10%)
    C:\>
    There is something strange about the limits on the Secondary host!
    I have not in any way changed the settings on the Secondary host and as you can see, the Secondary host has a maximum limit of only 35 MB storage on the CSV, but it also shows that this is 10% of the Volume. This is clearly not the case since 10% if 600
    GB = 60 GB!
    The question is, why does it by default set a too small limit (i.e. < 320 MB) on the CSV and is this the cause of the problem? I.e. is the limit ignored since it is smaller than the smallest amount you can provide using the GUI?
    Is the default 35 MB maximum Shadow Copy limit a bug, or is there any logical reason for setting a limit that according to the GUI is too small?

  • Is there any BAPI's to get system information

    HI All,
    Is there any BAPI's to get system information like name which NWcomponent is installed, version, function modules which are implemented.
    ITS VERY URGENT
    Thanks

    Hi,
    bapi for getting the details of system inthe sense euipment i believe so try this bapi
    BAPI_EQUI_GETDETAIL
    BAPI_EQUI_GETLIST
    Regards,
    sana.

  • Getting system and process information

    Hello frens..
    I need to know can we access system information in window using java
    Well i need to know
    1. how much memory a process is taking
    2. what is total CPU uitisation
    3. what is CPU uitisation of particular process
    4. and if some service is down (say database) is down than starting again that service.
    5. how to restart syatem
    I m using windows xp

    Thanks for response
    well JNI will cause to write all programm in C or c++ and then call them from java.
    is there not any java package where from we will get all those information
    if not then plz tell me where from i can hv c or c++ code for getting all system info

  • Getting system information

    is it possible to get system information using java. i want to get current user name, computer name and the domain name to which user is currently logged on (domain in NT/2000 systems). if it is possible, then how . i've tried it by using the class SystemInformation in Microsoft Visual J++ but is gives error that private class member can't be accessed. can any 1 help me out

    import java.util.*;
    public class SystemProperties{
         Properties properties_properties1;
         String string_name;
         String string_value;
         public SystemProperties(){
         public void get(){
              this.properties_properties1=System.getProperties();
              this.properties_properties1.list(System.out);          
         public static void main(String[] args){
              SystemProperties obj = new SystemProperties();
              obj.get();
    Use above code to list the system properties.
    Manu

  • Gather the "System status component information" via database table

    Hello!
    Which SAP/maxdb-table contains the "System status component information" data ?
    (i.e all components installed in the Abap-part).
    What does a sql statement (via dbmcli) look like to extract this information from that table?
    Version of the ABAP AS is NW2004s, maxdb is on 7.6.01.12
    Regards,
    Fredrik
    Message was edited by:
            Fredrik  Rosengren
    Message was edited by:
            Fredrik  Rosengren

    Hello Frederik,
    I think you mean table CVERS.
    dbmcli -d xxx -u xxx,xxx sql_execute select * from cvers
    Something like that.
    Regards, Michael

  • Error while reading the PO in the Backend system. Inform system admin

    Hi All,
    We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
    The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
    No error messages or logs in RZ20, SLG1 any where.
    All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
    Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
    It was working fine till a week ago and suddenly this problem is coming.
    We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
    Now this issue is coming up in test system where as development system is working fine.
    Please let us know where to look and how to resolve this issue.
    A quick response would be highly appreciated.
    Regards,
    Teja

    I am facing the same issue with one PO in the Production system.
    SRM 5.0 , R/3 4.6C Extended classic scenario.
    I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
    Error while reading the PO in the Backend system. Inform system admin.
    Message no. BBP_CF010
    I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
    I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
    In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
    Any inputs would be greatly appreciated. Please throw some light on this issue.
    Krishna

  • I changed my apple id but the apple id for icloud did not change on my mac.  How do I get icloud account information to change and match my new apple id?

    I changed my apple id but the applie id for icloud did not change on my mac in system preferences. 
    I have changed my apple id on system preferences under users and groups but the icloud preferences don't pick up the change.
    I restarted my computer, and still no change.
    I have been using icloud under my old apple id for mail calendars and notes.
    How do I get icloud account information to change on my mac's system preferences and match my new apple id?
    I am missing something.
    Please help.  Thanks.

    Thank you Roger, your solution gave me the courage to sign out of Systems Preferences.  The pop up told me it was going to delete my contact and other information from my mac, so I was hesitant to do that.  Well I did as you directed and I was able to sign in with my new apple id and I did not lose the information the pop up threatened I was going to.  So again thank you.  It is the little things that make a big difference sometimes.

  • How to get TaskId's Information using UWL in Webdynpro?

    Hi,
      I've to get TaskId's Information using UWL in WebDynpro
      from SAP R/3 workflow.
      For e.g.  Name, Creation Date, Status etc.
    I'm able to see property Value in WebDynpro but instead of Property Value I want same Information in WebDynpro without using any Functional Module from R/3
    I'm giving the XML file structure which I'm using
    I want to display information about the task Id which I'm giving in this configuration.
    <?xml version="1.0" encoding="utf-8"?>
    <! DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [
      ]>
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.task.webflow.TS91000129.UWL" connector="WebFlowConnector"
    defaultView="Test" executionMode="default" defaultAction="launchWebdynpro">
    <ItemTypeCriteria systemId="UWL" externalType="TS91000129" connector="WebFlowConnector"/>
    <Actions>
    <Action name="launchWebDynPro" handler="SAPWebDynproLauncher"
      returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="width=800,height=600,resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
      <Properties>
        <Property name="WebDynproApplication" value="TEST"/>
        <Property name="WebDynproDeployableObject" value="local/TEST1"/>
        <Property name="isnewwindow" value="1"/>
        <Property name="fruit" value="apple"/>
        <Property name="DynamicParameter" value="wi_id=${item.externaId}"/>
        <Property name="System" value="LocalSystem"/>
      </Properties>
    </Action>
    </Actions>
    </ItemType>
      </ItemTypes>
    </UWLConfiguration>
    Then in WebDynpro application I'm using this code
    String text = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("DynamicParameter");
    If I give any other property name I'm able to get in WebDynpro application.
    But I tried it for Task Id using Dynamic Parameter I was getting a Blank Value.
    Please Help Me.

    Hi Niharika,
    I think you have a typo in your code. You can retrieve the work item id by using [code]<Property name="DynamicParameter" value="wi_id=${item.<b>externalId</b>}" />[/code] instead of [code]<Property name="DynamicParameter" value="wi_id=${item.<b>externaId</b>}"/>[/code]
    In addition, you can get values from the work item container by extracting them as custom attributes:
    [code]<ItemType name="uwl.task.webflow.TS90000001.<system id>" connector="WebFlowConnector" ...>
      <ItemTypeCriteria ... />
      <CustomAttributes>
      <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="<element name>" ...>
      <Attribute name="<element name>" type="string" displayName="<element description>" />
      </CustomAttributeSource>
      </CustomAttributes>
      <Actions>
        <Action name="launchWebDynPro" handler="SAPWebDynproLauncher">
          <Properties>
            <Property name="DynamicParameter" value="<custom param>=${item.<element name>}" />
          </Properties>
          <Descriptions default="" />
        </Action>
      </Actions>
    </ItemType>[/code]
    Hope this helps,
    Mikko

  • Urgent !please help!! how to get children component in encodeBegin()?

    hello all
    how can get children component in encodeBegin()?because when encodebegin the tree is not constituted so i can't get children component,how to solve?
    please help!

    You aren't providing enough information to know for sure what is going on, but a likely problem is that you're rendering a JSP page with a new component tree for the first time, so the components are getting built as the page executes.
    In the EA3 release, this caused a problem, because encodeBegin() was called from the doStartTag() method of the JSP tag (i.e. before the child components have been created). However, in EA4 the call to encodeBegin() was moved to doEndTag(), so the child components should now be getting created already.
    In order to debug this any further, we'll need a specific example of what you're doing, and what version of JavaServer Faces you're trying it with.
    Craig

Maybe you are looking for