Rfq document once used as reference for po should not come in doc overview

Sir,
i want to create po with reference to rfq. the issue is that my client  daily creates30 po'swith reference to rfq. so once the rfq is adopted in po that rfq should not be seen in document overview. ONLY RFQ WHICH ARE NOT ADOPTED AS PO SHOULD BE SEEN IN PO DOCUMENT OVERVIEW.
PLEASE HELP ME OUT SETTING THE PARAMATERS SO THAT USERS CAN ONLY SEE THOSE RFQ'S WHICH ARE TO BE CONVERTED INTO PO'S
IT IS VERY URGENT
THANKS
Regards

Hi,
This can be done via user exit.
EXIT_SAPLMEQUERY_001
EXIT_SAPLMEQUERY_002

Similar Messages

  • Is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2

    is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.

    The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
    you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
    Cheers

  • HT1918 can I just use gift cards for itunes and not put a credit card on my account

    can I just use gift cards for itunes and not put a credit card on my account

    Welcome to the Apple Support Communities
    You can do that without any problem. That's what some people do to purchase content from the iTunes Store, App Store or iBookstore

  • When should I use static variable and when should not? Java essential

    When should I use static variable and when should not? Java essential

    Static => same value for all instances of the class.
    Non-static => each instance can have its own value.
    Which you need in which circumstances is completely up to you.

  • Use this mailbox for Junk does not appear to work in Mail 4.2.

    Hello, all:
    Have been using 10.6.x since it came out on my previous iMac [24" Early 2008 model]. Went with a fresh install of 10.6.3 on the new iMac [27" i7], and ported data over.
    The only problem that I've had is that setting the Use this mailbox for Junk command in setting up Mail 4.2 does not seem to work. I've closed Mail and looked at ~/Library/Preferences/com.apple.mail.plist, and the correct mailbox name is indicated for the two accounts [IMAP and GMail over IMAP] where I'd like to do Junk Mail filtering. However, there is no centralized Junk Mail filter, which is really annoying me.
    I didn't have this problem previously in Mail 4.x, and I'm expecting that it's a bug specific to 4.2, which I haven't seen in my previous incarnation because I did the import from 3.x->4.0, and the prefs carried forward correctly from 4.0->4.2.
    Anyone else running into this, and is there anything else I should be looking at? Am I explaining the problem such that it's clear what I'm asking?
    Thanks,
    Geof

    I figured out the problem (for me, anyways). In Preferences > Junk Mail, make sure Junk filtering is enabled and make sure the "move it to junk mailbox" radio button is selected.

  • Use This Mailbox for... not working for Yahoo Bulk Mail

    Hello!
    I have a Mac Pro and MacBook Pro, both running Mountain Lion.  My two Yahoo mail accounts are successfully set up via Mail on both Macs.  I was able to use the "Use this Mailbox for..." command to assign the Drafts, Sent and Trash for each account to the respective Yahoo folders (so I don't have duplicate folders). The problem is trying to do the same for the Bulk Mail folders.
    On my Mac Pro, I was able to successfully select the Yahoo Bulk Mail folders for each account and use "Use this Mailbox for... --> Junk" and it worked, no problems.  On the MacBook Pro, however, when I attempt to do the same thing, it doesn't seem to take.  Nothing happens...the Bulk Mail folder in each account remains separate in each account's folders, instead of moving up under the Mailboxes above the VIPs, Drafts, Sent and Trash.
    I've tried Rebuilding the mailboxes, and eventually deleting the accounts and re-adding them to Mail on the MBP...still can't get the Bulk Mail folders to assign to Junk.  The others (Drafts, Sent, Trash), no problems.
    Suggestions?

    Well, after literally months of searching, and trying to find different search terms to find the answer, I finally solved it.
    Here 'tis:  https://discussions.apple.com/thread/4247124

  • Once project is finished the project should not show in Dashboard

    HI All,
    In my cProject  my project status in completed last month.
    once my project is completed ,my project should not show in cProject portal in starting page under projects dashboard.
    how to make once completed project not apper in project dashboard.
    Thank,
    Kumar reddy.

    You can create a view in the project dashboard and filter out the statuses completed or canceled. User can always create local views, if needed for all users you can create a global view, call it something like "Active Projects" and set it as default.
    By the way, which version of PPM are you using?
    Edited by: Lashan Wanigatunga on Aug 1, 2011 1:22 PM

  • Query..for Field should not accept the manual entry

    i wann query for remarks Field in JE It should Not accept the manual entry it should accept only sys drop data.
    Thanks & Regards
    yogi

    For this field level authorization, you may only use SDK or SP to reach your goal.  SP would be difficult to use in this case.
    Thanks,
    Gordon

  • I use Yahoo mail on my Ipad 2 but I cannot see how to access my contacts. Other sites say I have to use Itunes. Surely this should not be necessary.

    other message boards say I have to use ITunes . Surely this is not necessary. Why is there not a tab visible on the Yahoo mail screen as there is on my windows PC?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • Bought IMAC sept2012 after updates gray screen shows up with logo at start up. Please help! I don't know the system as I just start using it and the package did not come with CD to reinstall system. I tried to reboot holding shift but it does not work.

    Please help.
    I bought the IMAC 21.5" /2.5QC /2X2GB /500GB /6750M sept2012. After the automatic update run when restart computer the screen is on the gray screen with the logo and wont' do anything else. I tried to reboot holding the shift key without success. The package did not come with a CD so I can not reinstall the previous system. I even don't know what is the system that came with the computer because I just start using it. I bought in the US but am in Brazil. HELP PLEASE, how can I get the previous system so I can reinstall it? I do not mind loosing data but I need to work on it. PLEASE HELP! Thanks!

    Try booting into the Recovery HD which is on the HD. Restart holding down Command+r and at the screen with four choices select Disk Utility>Macintosh HD and click on 'repair disk'. If any changes are made click on repair disk again until you get a clear pass. Restart as normal from the Apple menu.
    More about the Recovery HD:
    http://support.apple.com/kb/HT4718

  • Using Photo Browser For Photo's Not I iPhoto??

    Is Photo Browser in Mail connected to only Apple programs (iPhoto) or can I use it to browse a folder of my choosing?
    Thanks

    hunter,
    I'm not sure what you are driving at in your last post. If you are thinking of a "browser" (like the Photo Browser) that looks at everything in the file system (like a Finder window or dialogue, and opposed to just scanning for images), then we already have that. This is, essentially, what we get by clicking the "Attach" button.
    However, that's not the only way to attach documents/files to an email. We can simply drag anything we want to attach into the Mail composition window, directly from the Finder. Mail has long been completely "drag and drop" in this regard.
    What we have now, new to Mail, is support for what has become "traditional" iLife media browsing. Consider that the iLife components all interoperate with each other's libraries, all being able to show just what the other one does. Mail is now "joining the club," and can see what is stored in the iLife libraries just as they appear in the pertinent iLife applications. In effect, it can now "think" like iPhoto.
    What I am looking to see is the addition of support for the other iLife components in Mail. I have no doubt that this would appear as tabs to the current Photo Browser, just like in iMovie, allowing one to look at "Photos" (from iPhoto), "Music" (from iTunes), and "Movies" (from iMovie).
    Best of all, the same functionality is being built into the Finder. Just a couple days before Leopard was released, I listened to a complaint by a friend about the fact that one cannot open an image in iPhoto in an application like Photoshop, not directly from the "Open..." dialogue in Photoshop. My response to him was that he could open iPhoto, set his preferences there to open double-clicked images in Photoshop, then manage things that way.
    Only the next day, I found out that Leopard was incorporating the "Media Browser" functionality into the Finder. This is exactly what my friend was looking for! He'll have to upgrade to Leopard, of course

  • Using bean.variable for inputText but not getting value

    Hi I am using ADF BC JSF 10.1.3.2.
    I have a search page that has : dropdown1,
    based on dropdown1, I populate the dropdown 2 and with autosubmit and partialtrigger and also set either of the two search layouts true
    LAyout 1 based on dropdown1 value, say x, is rendered and I have 3 inputText , each have value= #{backingbean.variable}.
    Now when i am running this page, I got dropdown2 rendered with correct values and layout 2 rendered as required. Problem starts when I enter a value in the inputText1 and click on search button. In the search method, I try to get value for variable with so many ways : getVariable(), this.getInputText1.getValue()/// All these returned null.
    I tried to initialize the variable. In this case, the inputText1 showed initialised value and when i change value and submit, in the search method I still get the old initialised value.
    The inputText1 somehow never sets the value
    Please help..
    Regards
    Sudha

    Hi,
    I'm not exactly sure about what your functionality is but from what I gather the problem could be that if the bean is request scope then the value of the input text is already lost when you are trying to retrieve it.
    In any case I think that the best thing to do is to use the default view criteria functionality to perform the search if it is done on a view object.
    Gabriel.

  • HT4623 I just got an ipad and I use att/yahoo for a server, it comes with free mcafee virus software, but my ipad says that it cant download it because of my upgrade to higher over 6.1.0 and I dont know what to do can anyone help me,want to have mcafee on

    I just got an Ipad and I really dont know much about them its a 32gb 4g wi-fi, I use at&t as my server(dsl) and that works fine but I need to download my mcafee which comes with my at&t for free but it wont let me download it says I need more than 6.1.0and I dont know what to do can anyone help, I know someone that has 1 just like mine but she doesnt use a antivirus and doesnt have any trouble but,,, I have a laptop and a desktop and I use mcafee on both,, so any suggestions, I just down know what to do,,, can anyone give me input on what to do, and I also what to know is there anyway I can use my portable device that I got thru at&t that I can buy minutes on, is there an adapter for this ipad that I can use this on,, help I need all I can get,, thanks chrystie

    You can not install it.
    Only apps from the official Apple App Store can be installed.

  • I have an iPad, iPod touch, iPod classic. I tried using one account for allow only not being able to sign on with my touch. Do I  need separate accounts for each?

    Do I need separate accounts for each?
    I have an iPad, iPod classic and an iPod touch.
    Can not sign on to App Store with the touch.
    So how can I set up a new account?

    Error message -can not sign into App Store
    Same message for iTunes
    I use my iPad most of the time but would like to ad app to the touch

  • TS4268 My phone uses my email for iMessage but not my phone number, how do I get that to use my phone number and not my email?

    I can't figure out how to use my phone number and not my email for iMessage

    Settings>messages>Send & Receive> Start New Conversations From and select your phone number.

Maybe you are looking for