RFQ error
Hi Guru,
I have created an RFQ with status send immediately (when saving the application). After saving the RFQ, RFQ number was generated, but there's an error in sending fax the error is "
Error in OPEN_FORM for document 6000000112".
Please advice it's urgent..
Thanks in advance.
Mike
Dear,
is SGD is your Currency, if yes then Go to OBBS and maintain M type Currency Convertion then go to the OB08 and maintain Currency Convertion.
just check it out.
all the best
Regards:-
Poision
Similar Messages
-
Not able to creat RFQ in 4.7
hi everybody,
while creating RFQ error msg. is coming
like
NO MSG RECORD COULD BEFOUND FOR OUT PUT OF MSG. here i am using 4.7
thankyou in advance
vivek c. tripathihi
do the following configuration and try
1.Create Message Type(ex. xneu)and set the Dispatch Time
as 4( Sent after Saving) and set the Transmission Medium.
2.Assign this Message Type in the Message Determination
Schema for RFQ(RMBEA1).
3.Create Condition Records by T-Code- MN01.
4.You can Trigger the Output if needed by T-Code - ME9A
Hope this helps to solve your requirement....
regards
kunal
award if helpful -
Getting error when creating a RFQ in MM module" create rfq item overview"
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue.
This error i am getting when creating a RFQ in MM module and when trying to save the screen "create rfq item overview" then it gives me a pop up box message " SAP SYSTEM MANAGER: WORK PROCESS RESTARTED, SESSION TERMINATED".
Here are the details of teh system
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi Mudessir,
With the help of ABAP'er try the following.
1. open the program 'LCLSCF2G' from SE38.
2. Keep a break point at line no: 131.
There is 'END SELECT' statement which is getting failed at line no 131 in the program.
Try to analyse the SY-SUBRC at that point.
If your technical consultant can't solve this, write to SAP OSS (service.sap.com).
I have searched SAP OSS, there are other situations, but your case is not there. So write to SAP if technical consultant can't solve it by debugging the program.
Regards,
Madhu. -
At the time of RFQ creation dump error
Dear All,
At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
the error message is :
Runtime errors SYNTAX_ERROR
Occurred on 09.09.2009 at 12:10:27
Syntax error in program "SAPLV61A ".
What happened?
The following syntax error occurred in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
Error in ABAP application program.
The current ABAP program "SAPLMEVA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLV61A ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The following syntax error was found in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ARCHIVAL"
Network address.......... "172.26.2.145"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "ARCHIVAL"
Database type............ "MSSQL"
Database name............ "EDP"
Database owner........... "dbo"
Terminal................. "cheeid92corit"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Mar 9 2009 22:54:07"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "SQL_Server_9.00 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 777
User................ "MMCORE"
Language key........ "E"
Transaction......... "ME47 "
Program............. "SAPLMEVA"
Screen.............. "SAPMM06E 0311"
Screen line......... 54
Information on where terminated
The termination occurred in the ABAP program "SAPLMEVA" in
"ME_LOAD_VARIANTS_PRICING".
The main program was "SAPMM06E ".
The termination occurred in line 55 of the source code of the (Include)
program "LMEVAU08"
of the source code of program "LMEVAU08" (when calling the editor 550).
Source code extract
000250 ENDIF.
000260 *--> Initialisieren
000270 *--> not necessary anymore (Raimond Buchholz)
000280 * CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
000290 *--> Preisteile der Varianten besorgen
000300 CALL FUNCTION 'CEI0_GET_CONDITIONS'
000310 EXPORTING
000320 INSTANCE = I_CUOBJ
000330 APPLICATION = 'MM'
000340 TABLES
000350 * CONDITIONS = T_VCKEY. "del 194053
000360 CONDITIONS = T_VCKEY "ins 194053
000370 exceptions "ins 194053
000380 error_message = 01 "ins 194053
000390 others = 02. "ins 194053
000400 *--> Preisteile der Varianten mit Belegnummer versorgen
000410 LOOP AT T_VCKEY.
000420 T_VCKEY-KAPPL = 'M '.
000430 T_VCKEY-VBELN = I_EBELN.
000440 T_VCKEY-POSNR = I_EBELP.
000450 MODIFY T_VCKEY.
000460 ENDLOOP.
000470 ENDIF.
000480
000490 *--> Preisteile der Varianten an Preisfindung übergeben
000500 *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
000510 *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
000520 IF I_NO_LOAD IS INITIAL.
000530 DATA: I_POSNR LIKE VBAP-POSNR.
000540 I_POSNR = I_EBELP.
CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
000560 EXPORTING
000570 APPLICATION = 'M '
000580 VBELN = I_EBELN
000590 POSNR = I_POSNR
000600 TABLES
000610 TVCKEY = T_VCKEY
000620 EXCEPTIONS
000630 OTHERS = 1.
000640 ENDIF.
000650
000660 ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY GVP
SY-UCOMM
SY-TITLE Maintain Quotation : Item 00001
SY-MSGTY E SY-MSGID AIPLOC
SY-MSGNO 002 SY-MSGV1 303632
SY-MSGV2 SY-MSGV3
SY-MSGV4
Kind regards
P.AnandhakumarHi Anandhakumar,
Debugg the transaction with help of ABAPER.
System will show you the reason for the above error.
Hope this should solve your problem.
Thanks and regards
Gitesh -
Hi,
When I create either PR or RFQ or PO and save it, I am getting an error "Express document Update was terminated received from author SAPUSER" and the PR or RFQ or PO is not getting created.
The complete details of the error is:
Update was terminated
System ID.. ECC
Client.. 001
User.. SAPUSER
Transaction.. ME21N
Update Key..18118D8C85EA4E83A8A8D38E736DE0AD
Error Info.. B2 001: Local logical system is not defined.
Please help me to fix this issue.
Thanks in advanceHi,
Consult with your basis consultant & check assignment Client to Logical System.
For more check SAP Note:614774 & 210919
Regards,
Biju K -
Error in clicking preview button in RFQ's
Hi All,
Encountered error in clicking preview button in RFQ's.
Request Failed!
APP-FND-00296: Cannot submit concurrent request for program SEZCPORFQ
Check if the concurrent program is registered with Application Object Library.
Check if you specified the correct application short name for your concurrent program.We define SEZCPORFQ in executable and define in program under concurrent.
But still, error occur.
We dont know what to do, any help pls.
Version EBS: 12.1.3
Thanks,
alexHi Alex,
Encountered error in clicking preview button in RFQ's.
Request Failed!
APP-FND-00296: Cannot submit concurrent request for program SEZCPORFQ
Check if the concurrent program is registered with Application Object Library.
Check if you specified the correct application short name for your concurrent program.We define SEZCPORFQ in executable and define in program under concurrent.
But still, error occur.
We dont know what to do, any help pls.
Version EBS: 12.1.3
Thanks,
alexIs the issue with this specific concurrent program? If yes, what is the difference between this program and other ones which work properly?
Have you tried to enable trace/debug and see if you get more details about the error?
Thanks,
Hussein -
Hi Gurs,
I am creating RFQ with reference to PR for Vendor Consignment Stock(i.e. Item Category as 'K'), i am getting an error as Field selection PT2A not defined . Can any one can guide me why i am getting this error.
Thanks in advance..
Regards
Jayachandra Prasad.VHi Prasad,
Do one thing Go to field selection for RFQ through -> SPRO->Material Management->Purchasing->RFQ/Quotation->Define Screen Layout at Document Level.
Here Select Field selection PT5A or any other available in your system, Press 'F6' or Click on Copy As icon, New screen appears, Change the Name of field selection to 'PT2A' & Description as ' Consignment' & press Enter, you will again come on the main screen,
Now you do your process of making RFQ through ME41. -
RFQ Message Error " Not Processed"
HI
If the message was processed successfully, the status is set to '1' and if an error occurs, the status is set to '2'. Status '0' usually means that the processing program has not yet been started (if the message is to be processed manually, for example).
In my RFQ the processing status is "0" means " Not Processed"
In the msg status a "traingle button" is thr instead of the "Green Button"
So that we can not able take print out in ME9A also not able see print preview thro ME9A
How to make this processsed...
Vijaycheck if the RFQ contain release strategy and alrady released for output.
you can check the print preivew in ME4N. -
HI all,
Iam creating a standard RFQ manually through purchasing>RFQ's and quotations>RFQ.
But when iam saving the RFQ, iam getting an error like,
Please enter the required value for the Purchaser's Phone Number segment in the PO Headers flexfield.
Please help me to get rid of this error.
with regards
vijayHI sandeep,
Your reply solved my purpose. Can you also please tell where That particular Flex field is located in PURCHASE ORDERS window.
Thank you,
vijay -
HI
I recv the below error when i select a particluar RFQ msg line and i selected the processing log button....
How to resolve this
No processing log exists
Message no. VN052
Diagnosis
A processing log could not be found for the selected output.
Procedure
Possible reasons are as follows:
The selected output has not yet been processed
The processing program did not write a log
System logging has been de-activated for the selected output type (use settings in Customizing for current application for the selected output type)
VijayHi
All Nace setting were ok here.. we compared the same with diff client server
But the error i dont know is
The selected output has not yet been processed
The processing program did not write a log
System logging has been de-activated for the selected output type (use settings in Customizing for current application for the selected output type)
Vijay -
Runtime errors during RFQ creation
Hello experts,
I am trying to create a RFQ for my client. I have provided all necessary information needs to create a RFQ but when I try to execute, I get Runtime error "DYNPRO_NOT_FOUND"
Can anyone tell me how can I solve this problem. I belive this error related to ABAP program.
Regards,
Atul KumbhaniRaf,
Termination occurred in the ABAP program "SAPLXM06" - in "EXIT_SAPLEINM_013".
The main program was "SAPMM06E ".
In the source code you have the termination point in line 10
of the (Include) program "MM06EO0C_CUSTSCR1_HEAD_SET_DAT".
Regards,
Atul Kumbhani -
Hi
am getting the follwoing error log in RFQ print our
How to resolve this?
ABSA 502 Output ignored (requirement 104 not fulfilled)
MAHN 502 Output ignored (requirement 103 not fulfilled)
NEU 541 Output found
VijayVijay,
did you try looking up the access sequence for ABSA and MAHN, the condition tables associated with the access sequence and the fields in the condition tables? Are all the fields that are required for the message to be fulfilled being available during message processing? -
Item Category D and Account Assignment F error message in RFQ
Hi gurus,
Am experiencing a strange error message creating an RFQ from a Purchase requisition generated by a maintenance order : "Combination item category D/account assignment category not defined".
The combination Service D/ Order F is actually defined in customizing step : "Define Combination of Item Categories/Account Assignment Categories": The Purchase requisition in indeed created without any problems with this combination of item category / account assignment which is pretty confusing, Is there an specific step for RFQ somewhere ?
Thks for your feedback !
OlivierHi
Check the configuration in the following menu path:
IMG - MM - Purchasing - RFQ/Quotation - Define document types
Check the item categories allowed & then select the item category D & check whether you have combination of PR with item category defined.
Other than this I do not think there is any other specific combination.
Remember that in RFQ you don't see the account assignment catgory.
Regards
Prasad -
Dear MM gurus
I have maintained all the steps for release strategy for RFQ, while clicking on release flag in ME42 it is giving following error. please guide
Purchasing document 6000000015 not subject to
release strategy
Thanks in advance
kailash N. thakkar
9869171090Hai,
Release strategy gets effected when all the characteristics mentioned for the release strategy are complied otherwise the strategy will not affect the RFQ.You might have given any value not relevant to the characteristic.For eg you might have given alower value than the value mentioned for the characteristic RFQ value.
Regards,
Gangadhar -
Hi Friends,
I am creating a RFQ (ME41) and wants to give print through ME9A, in development server its working fine and i am able to take a print out. But in quality server system is not generating a spool request in ME9A. I have checked all setting in Dev and in Quality server, its same a both places, then why system is not generating a spool in quality.
Please advice. I have checked Print related config., NACE settings are correct.
ShrinivasHi
Please check whether you have Ticked "Print Immediately" in the Q server. If you maintain this, you will get printout.
Pls Revert and Reward
Regards
Vijay
Maybe you are looking for
-
Lightroom or Elements for a simple purpose - RAW to black&white
Hi, I have no experience whatsoever with digital photography, I've been working on analogue for several years now, but want to give it a try... The thing is that I'm looking for a software, which will allow me: - possibility to convert color RAW from
-
I have recently been trying to copy some old vhs tapes to dvd's by recording them to my camcorder, then capturing them on my computer software. My camcorder stops recording some of the tapes due to copy restrictions on the tape. Will using a analog t
-
I have my Xbox 360 setup with my computer using the VGA adapter for display and a 3.5mm output streamed into my Mac mini for audio. When I go to System Preferences > Sound > Input, I see the sound coming, as the "Input Level" bar is fluctuating; howe
-
How do you import artwork from custom CD's?
I have a few CD's from street performers and I would like to import the artwork from them, how do I do that?
-
I downloaded Flash Album Exporter from Apple download page and the file is in Unix Executable File and I can not open it up.. I am running on Tiger with up to date updates and I can not do any thing with it.. It is not the only file that I have that