RFQ Header consition inclusion
Dear Experts,
I've created a pricing procedure for domestic, defined, respective schema determination.
While creating PO, all the conditions are flowing correctly. Also i can add condition values at header level also.
But while creating RFQ, if i tried to enter some condition value.. the system not allowing to enter conditions screen itself.. it is giving the error as
" Not possible to determine a condition type
Message no. 06658
Diagnosis
The system was not able to find a condition type for the item. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG): Define calculation schema '"
But i can able to enter conditions for item level.. please provide me the solution for the same.. for accessing conditions of RFQ at Header level.
FYI, i've checked RFQ in IDES, i can able to enter conditions.
Thanks in advance
Hi,
Since RFQ is a time-dependent purchasing document so it is not allowing you to enter the Header Condition types in ME47.
To cross-check it, go to SPRO > MM > Purchasing > RFQ/Quotation > Define Document Types > here for your RFQ Document Type, check "Time-dependent" indicator will be active. Just remove it once and then try by creating a completely new RFQ in ME41 and then maintain the Quotation in ME47. It will allow to enter the Header conditions.
But, it is not suggested to do so.
Similar Messages
-
PR HEADER NOTE TEXT TO RFQ HEADER NOTE TEXT
Hello all
We are maintaining the PR Header Note & we are creating the RFQ with reference to the PR , we are maintaing the PR Header note , but it is not getting copy in RFQ Header note
Kindly suggest
Thanks in advance
Regards,
Rajeshhello
Thanks for reply
After selecting the Header note in RFQ under Copying rules for header text & Selecting the Header note only text linkage is allow is RFQ
whether i have to make new entry as PR
No entry of PR availbale in for selection
Please suggest
regards
Rajesh Dalal -
Hi all,
I have the below the requirement.
Whenever RFQ is created (manually, referring PR thru ME57, or referring contract) some
text need to be populated in 'Header text' of RFQ Header.
How to achieve the requirement? Are there any user exit which could fulfill
this requirement.
Please give your inputs.
Regards,
ParthaHi,
Can you please explain in detail?
My requirement is that the text need to be populated automatically
whenever RFQ is created.No User intervention on this.
Partha -
I have copied MEDRUCK sapscripts to ZMEDRUCK and I have a requirement to print some rfq header text. I have got the Text ID (A01), Text name (600000022), Text Object (EKKO).
What is the syntax to print this header text using a INCLUDE statement ? I have to print the heading and the contents of this text object. Can I get some examples ?
Also, the heading should not print if the text is blank.
Thanks.
Edited by: NewComer on Dec 27, 2007 6:06 PMCheck these threads. U have sample code.
Display long text in SAPScript
Text printing in SapScript
Regards,
Maha -
Copy the PR header Text to RFQ header Text while Creating W.R.T
Dear Guru's
While Creating with reference I want to Copy the PR Header text into RFQ Header Text..
Please do the needfulll
Thanks in Advance.
GSANADear You can not copy the header text of PR to RFQ in the standard SAp, as PR is internal document and RFQ is external. but if you even want to do it then contact your ABAP team.
regards,
qsm sap -
RFQ - Header Condition (Not possible to determine a condition type)
Hi,
I have defined my own Condition Schema for RFQ Item Condition are working fine. But when i am trying to add header condition it is giving msg "Not possible to determine a condition type"
RegardsHi,
I have defined my own Condition Schema for RFQ Item Condition are working fine. But when i am trying to add header condition it is giving msg "Not possible to determine a condition type" and now allowing me to enter the condition on header level.
Regards
Edited by: Kashif Ihsan on Jun 14, 2010 3:52 PM -
Conditions on RFQ Header are not changeable at PO Header level
Dear Gurus,
I have maintained a Quotation and enter the conditions on Header level in Quotation. Once i adopt the Quotation in Purchase Order, these conditions are displayed both at Item and Header level and i cannot edit the condition value at PO Header level, they are editable at Item level but not at header level.
I want to edit them at PO Header level too.
Please advise.
Johi KapoorHi,
If that is item condition then you can not change it at header level
check in M/06 make it at header level in change which can be made tab
Regards
Kailas Ugale -
Header condition disabled in RFQ
Hi all,
1. In RFQ document header and item condition are not in active.
When i go to RFQ header --> Conditions ( it is disabled )
Similarly RFQ item --> conditions ( it is disabled )
2. In Quotation i cannot enter the header conditions , i can enter the item condition but system is not picking the Schema which is assigned to the vendor. By default system is taking the other condition types like P000 etc.
Can any one suggest me both the above mentioned issues.
Regards
GSGHi,
please check your RFQ document type first in the customizing:
Transaction "SPRO >>
materials management >> Purchasing >> RFQ/Quotation >> Define Document
Types" - was the flag for "time-dependent conditions" set for the concrete document type?
When you use time-dependent conditions, you have to maintain
for your relevant condition type in pricing procedure for
condition supplements (RM0001) in the Path "SPRO >> materials management
>> purchasing >> conditions >> define price determination process >>
define condition types.
SPRO >> materials management >> purchasing >> conditions >> define price
determination process >> Define Calculation Schema
Procedure RM0001 Condition Supplement Header
like:
1 3 RA01 Discount % on Gross
10 1 RA00 Discount % on Net
10 2 ZA00 Surcharge % on Net
10 4 ZA01 Surcharge % on Gross
It is required to maintain a pricing procedure for condition supplements.
Regards,
Edit -
Hai Friends,
I want to know full details about RFQ, where what are all the details we can enter in that RFQ... If we want entry any excise duties, we can enter tax code in RFQ & we can maintain condition record separately but where u have check the excise details like in PO taxes.Just i know how to create RFQ.
Please explain about Purchase info record also.
Please share this knowledge to me..HI,
Definition
A request for quotation (RFQ) is an invitation extended to a vendor by a purchasing organization to submit a quotation (bid) for the supply of materials or performance of services.
Structure
An RFQ consists of the RFQ header and the items.
RFQ header
Contains general information on the RFQ, such as the vendoru2019s address
Items
Contain the total quantities and delivery dates for the materials or services specified in the RFQ.
An item of a quotation may contain a delivery schedule made up of a number of schedule lines in which the total quantity is broken down into smaller quantities to be delivered on the specified dates over a certain period.
An item of the procurement type "external service" contains a set of service specifications. The latter can be hierarchically structured. The summary view of such a hierarchical structure is referred to as an outline. The outline comprises a number of levels, each representing a level of the service hierarchy. The RFQ quantities are set out in service lines, representing individual jobs or activities.
In contrast to other purchasing documents, you cannot enter an account assignment in an RFQ.
BR,
Krishna -
Error in header files on DMA using SDK
I followed procedure as like as simple Hello_world mention in zedboard and chosen "OS Platform as Linux".check out this link i followed the procedure as
http://zedboard.org/content/zedboard-create-planahead-project-embedded-p....
Then replaced that Hello_world code by My program.I attached DMA program.while compling I faced error and post in the zedboard->support->s/w development application and then i added header files in the project explorer window in SDK to the include folder as a path.pls check out link below for header file inclusion as http://s1322.photobucket.com/user/Arunvision/media/sdk_bsp_zps99084a46.j...
we got the error like as
**** Build of configuration Debug for project Dma ****
make all
Building file: ../src/OCM2PL.c
Invoking: ARM Linux gcc compiler
arm-xilinx-linux-gnueabi-gcc -Wall -O0 -g3 -I"C:\Xilinx\14.4\ISE_DS\EDK\sw\XilinxProcessorIPLib\drivers\scutimer_v1_00_a\src\" -I"C:\Xilinx\14.4\ISE_DS\EDK\sw\XilinxProcessorIPLib\drivers\dmaps_v1_00_a\src" -I"C:\Xilinx\14.4\ISE_DS\EDK\sw\XilinxProcessorIPLib\drivers\scugic_v1_00_a\src" -I"C:\Xilinx\14.4\ISE_DS\EDK\sw\XilinxProcessorIPLib\drivers\common_v1_00_a\src" -I"C:\Xilinx\14.4\ISE_DS\EDK\sw\lib\bsp\standalone_v3_07_a\src\cortexa9" -c -fmessage-length=0 -MMD -MP -MF"src/OCM2PL.d" -MT"src/OCM2PL.d" -o"src/OCM2PL.o" "../src/OCM2PL.c"
arm-xilinx-linux-gnueabi-gcc: fatal error: no input files
compilation terminated.
make: *** [src/OCM2PL.o] Error 1
Pls provide solution as soon as possible.Ran into a very similar problem compiling code (on win7/64bit) for the zc702 board. In our case it was due to the cygwin binaries being on the windows PATH. You won't have to remove cygwin - just remove from the windows path.
Also can't take credit - John Zhao and his team at mathworks uncovered it - while we were tracking down a different issue.
--Bart -
Creating PO from PR - some line item fields are disabled.
Hi All,
I am creating a PO from purchase requisition through ME21N, from the document flow, I am dragging and dropping the PR into PO screen. While doing this, there are some line items which gets disabled. I want to check where this has been done, I checked in the BADI and also in screen exits:
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201 Subscreen: agreement header
SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211 Subscreen: agreement item
SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301 Subscreen: RFQ header
SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311 Subscreen: RFQ item
But could not find anything, Please help.
Regards,
MadhuriDear Guru's,
we just facing the already discussed issue that a PO within PLANT from PO-item-level should be part of the PO-output determination. Which userexits have to manipulated to get field PLANT into structure KOMKBEA_FILL especially when PO is still not saved (NO EKKO/EKPO information available) but message is already determined with status "NOT PROCESSED"???
Thanks for an answer.
Regards,
Bernd -
Add extra field in ME21N at Additional Data Tab
Hi All,
I want to add Two fields from our custom table (Tax and Tax type) in ME21N T code at Additional data tab,
and save the value in our custom table.
Please suggest me for this .
I searched for this there mentioned BADI- ME_GUI_PO_CUST
So Please advise me how to proceed for this one.
Thanks & Regard
VivekUse MM06E005 enhancement to add fields in screen of ME21N
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201 Subscreen: agreement header
SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211 Subscreen: agreement item
SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301 Subscreen: RFQ header
SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311 Subscreen: RFQ item
Use the appropriate screen exit depending on where u require to add field -
Neeed tocreate new route list in omgk t-code
hi
I need to create a new route list which should be assigned in the omgk t-code
in t-code omgk
we have scope list when we click on it, another screen opens where we have
list scope scrren and sub screen attached to it
when we slect any one and click on line structure, another screen opens qwhere we have to assign the create route list
problem to solve is :
as sap has standard oute list where they are linked to some fileds to display.
we need to create a route list and have to link to some fileds and it is assigned to scope list
when we run t-code me5a and select scope list which we have created, output it should show only these filed.
THis is bit urgentUse MM06E005 enhancement to add fields in screen of ME21N
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201 Subscreen: agreement header
SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211 Subscreen: agreement item
SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301 Subscreen: RFQ header
SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311 Subscreen: RFQ item
Use the appropriate screen exit depending on where u require to add field -
ME41 Tcode Screen Modification
Hi all,
I have got a problem with Creating RFQs. The thing is that if i press enter after inputing Quotation Date, Purch. Org. and Purch. Group with out entering RFQ then it takes me to the screen "Create RFQ : Header Data".
Instead of going there i need to goto "Reference to PReq" Dialog Box. This is a button present in me41.
Simply i just want to goto Header Data for RFQ, i want to goto Refernce Dialog Box then to Header Data.
What should i do, i saw some enhancements but i dont know how to do it.
plz help.
Thanks,Hi,
Take look on this link and you will understand how to do it!
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/1e/728d281d5e11d289d30000e82158f1/content.htm
Best regards,
Daniel Kiel -
Hi all,
I have got a problem with Creating RFQs. The thing is that if i press enter after inputing Quotation Date, Purch. Org. and Purch. Group with out entering RFQ then it takes me to the screen "Create RFQ : Header Data".
Instead of going there i need to goto "Reference to PReq" Dialog Box. This is a button present in me41.
Simply i just want to goto Header Data for RFQ, i want to goto Refernce Dialog Box then to Header Data.
What should i do, i saw some enhancements but i dont know how to do it.
plz help.
Thanks,No Other Screen Exits are available. In AMPL000, screen exits are available for Item Level. for this screen exit u have to insert the field in teh structure CI_AMPL. and activate the structute also.
in this case u activete screen exit, CI_AMPL structure and EXIT_SAPLMBAM_001, EXIT_SAPLMBAM_002.
- Selva
Maybe you are looking for
-
T-SQL TechNet Gurus Announced for June 2014!
The Results are in! and the winners of the TechNet Guru Competition June 2014 have been posted on the Wiki Ninjas Blog. Below is a summary, heavily trimmed to fit the size restrictions of forum posting. BizTalk Technical Guru - June 2014 Steef-Jan
-
Error while accessing UIX pages when deployed using OC4J
UIX: 2.1.9 JDeveloper: 9.0.3 Database: 8i Release 3. Using UIX and BC4J, I created few pages for a small application. I installed the OC4J standalone and configured setting library paths and and deployed this application. I extended the UixPageBroker
-
BT Infinity 2 - Suddenly no speed after 1 year of ...
I have had a solid 50 meg with 15 up for an entire year. I know this because I stream and upload every day, so if my connection was slow, I would know. After 1 year of perfect service and being a very happy customer I know am getting 1 meg. What seem
-
Firefox doesn't launch correct link
Small bug: If Firefox is not running, and I click on a link in my email program, Firefox launches and displays my home page instead of the URL in the link. If Firefox is running, it goes to the correct URL.
-
Check file existance in operating system
Dear Collegues, Is there any function in oracle that checks a file existance located on local disk of windows computers? Like i have created a file c:\test.txt and i want to check through oracle function that this file exists or not. Regards, Imran B