#RFRs on all cells in Report

Recently, a few of users have reported an issue where they receive a #RFR for all cells which are retrieved from the database.
This is no longer a sporadic issue.
We are using BPC 5.1 SP3 and our database is on SQL 2000.
Any and all assistance is greatly appreciated!
Thank you in advance!

HI Garvi Koushik,
The symbol "#RFR" always appears when you using "EVGTS()" OR "EVCOM()" function and you don't expand that. Perhaps, Are you using that function ?
Regards,
Wandi

Similar Messages

All Inventories Value Report&Inventory Ageing Report& Current And as on Date Stock not matching

Hello All,
I am new to inventory. I need some help.
After opening the periods of purchasing and inventory for the month of April'15. The below reports should match in costing.
But they are not matching. Kindly help on this as its PROD.
Inventory Ageing Report
Current And as on Date Stock Statement With Value Report
All Inventories Value Report - Average Costing
Thanks
RR

MBEWH is the valuation history, this is only updated with the first movement after a period closure. And the period is a month.
There is no table in SAP that holds the stock information on daily basis.
You have to develope this yourself. Easiest method by copying a table like MBEW and MARD daily to a Z-Table.
A stock situation at a certain date can be calculated with MB5B.
Edited by: Jürgen L. on Aug 5, 2008 4:06 PM

Print write stat at end of all pages in report

Hi,
I want to print write stat at end of all pages in report.
Thanks,
Asha

hi ,
u can use End-of-Page event to print write statement at ever end of the page.
for Ex:
Report ztest line-count 8(3).
start-of selection.
loop at itab...
write:/ .........
endloop.
end-of-page.
write:/ "end of page'.
revert back if any issues.
reward with points if helpful.
regards,
naveen.

Copy cells in report

Dears ,
It's possible to copy cells in report like excel sheet , like this example ?
http://41.41.94.126:8080/i/1.jpg
Ahmed ,

dear friend,
you would do:
1. search SAP Notes;
2. check out the updates/patches for your MS Office;
3. replicate it on another computer/another sap user (make sure it is a local issue)
good luck!

Users not able to see all the default reports in FDM under analysis

All,
Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
Regards

You can set security on Report folders in workbench. You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder. There are some in here that default to the admin level but you can override it.
Regards
JTF

How to search a string in all opened html report ?

Hey people .. Sorry to bother U again.. I have a problem again.. and thanks to solve my previous problems...
I want to make an application in which I want to search a result string
in all opened Html reports... If I don't want to go to the all
desination and search one by one.. Is there any method to search the
result in all opened reports at that time..
I am very confulsed .. I have no Idea how I am gonna solve it... If anybody can help.. I would really appreciate that.. Thanks..

Thanks Justin I have managed that problem..
I am stuck at another one.. If you can help.. I have also posted addressing you in another relavent Thread..
I have a spreadsheet data which has 286*516 Pixels data. Data is 16bit
(from which only 12bit is usefull). Each data is a Level of a Pixel. I
want to Display Grayscale Image.
I have used 3D Graph to display it and projection XY selected . I am
getting My image as grayscale Image but somewhat slow display if I
continously run it.
Second Method I tried is Directly "some 2D Graph" ( Sorry I forgot the
Name.. I will get it next time) which directly display that 16 bit
spreadsheet file. But it has only 255 levels so it didn't utilized my
data and resolution is poor.
My doubts are..
1. Is 3D graph method I am using is Actually displaying my 16 bit image.
2. In 3D graph method : Because of that 12 bit format of my data and I
had to convert it in 16 bit I am loosing any levels or
Resolution ?
3. Is there any way of increasing 255 level to 16bit level 2D Graph method.
4. Is there any method that can display my 16bit information as a image utilizing all my levels.
Please Do me a favor .. thank you

GL trial balance and All inventory value reports

Hi,
in oracle applications 11i the inventory super user claims that the results of the following two reports:
GL trial balance
and
All inventory value report
for the period MAY-09 DO NOT match.
How can i investigate this issue?

I haven't worked on PPAC but I assume its only a cost method to build the cost. Once costs are build GL entry happens in the same way.
You said that you first freeze the cost and then run subledger update report.
Once you freeze the cost, what cost do you see for product x?
Once you produce 20 TONS output; subledger update should generate entry as follows:
Cr WIP: cost*20
Dr INV: cost*20
Now you mentioned about title ALC (GL Allocation). I haven't seen that title.
Also at the period end we need to run revaluation of inventory for STND method, I am not sure if the same is required for PPAC. Try performing that in test instance to see accounting entries generated.
I am sorry if I confused you or didn't understand your question. I have used mostly worked with STND method and just trying to extend my experience with PPAC.

All inventories Value Report and GL Balance Sheet (YTD) not matching

Hi There,
We are in 11.5.9 and we are getting mismatch in All inventories Value Report and GL Balance Sheet (YTD).
Please guide us how to identify where the mismatch is?
Thanks,
GR Shankar

I realise this post is not current, however this is fetched in search results and felt I'd add an additional detail that I just learnt.
http://docs.oracle.com/cd/E12104_01/books/AnyInstAdm/AnyImp_ConfigFinance6.html
Oracle BI Applications provides two ways to populate the GL balances (stored in the W_GL_BALANCE_F table), as follows:
By extracting the GL balances directly from Oracle General Ledger, as follows:
In DAC, for the Subject Area 'Financials - General Ledger', in the 'Configuration Tag' tab, make sure that the tag 'Oracle - Extract GL Balance' is unchecked for the 'Inactive' checkbox.
Make sure the tag 'Financials - Calculate GL Balance is checked in the 'Inactive' checkbox.
Click Assemble to redesign the subject area.
After the subject area has been redesigned, redesign the execution plans that contain this subject area.
By calculating the GL balances based on the records in the W_GL_OTHER_F table, which stores all journal lines, as follows:
In DAC, for the Subject Area 'Financials - General Ledger', in the 'Configuration Tag' tab, make sure that the tag 'Financials - Calculate GL Balance' is unchecked for the 'Inactive' checkbox.
Make sure the tag 'Oracle - Extract GL Balance' is checked in the 'Inactive' checkbox.
Click Assemble to redesign the subject area.
After the subject area has been redesigned, redesign the execution plans that contain this subject area.

Saving/Printing all pages of Report developed in Portal....

Hi friends,
How can I save a Report developed in Portal as soft file?
I know there is a feature in Customizing Report to enter the
File save as Excel and it will try to save file.
I have 2 questions :
a) How can I achieve saving the Report as html/ascii/excel file
when it has say 20000 rows ?.
(Because always when I run a report on browser it brings data
when I press "Next" and "previous" buttons.)
b) If I need to print the Report to printer how can I print all
pages of Report output?
Thanks a million for your valuable time.
Sincerely
Madhav

I also noticed there is a Firmware Upgrade Utility out on HP.COM that addresses a few PJL command issues, so it might be worth checking the Firmware versions on your units to see if you have the latest:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=lj-725...
Though I work for HP, My posts express MY opinion, and not those of HP.

How to show view tab Main Report and all of Sub Report in one action through Visual FoxPro

How to show all view tab (Main Report and all of Sub Report) in one action.
I already know how to show Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the 'MyReport.rpt' it has 2 subreports:
1. MySubReport_1
2. MySubReport_2
I try to show MySubReport_1 and MySubReport_2 together with their own Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub1=oRptOpen.OpenSubreport('MySubReport_1')
oRptSub2=oRptOpen.OpenSubreport('MySubReport_2')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Did I miss something because there was only view tab 'Preview' (Main Report) shown without view tab MySubReport_1 and MySubReport_2.
Thank you.

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

Change font size/type in all cells of table

Hi,
I cannot figure out how to change the font size/type in an existing table. There seems to be no way to select all cells and make a global change.
I can select individual columns and rows, and change the font for these, but that is tedious.
Anyone help?

Click in one cell
Select all
cmd + T to get the Font panel then select the font and the size.
Yvan KOENIG (from FRANCE jeudi 11 septembre 2008 21:15:51)

How to merge cells in report designer

Hello BW Experts,
How to merge cells in report designer.
Thanks in advance
BWer

Hi BWer,
I had to check for some details from Development.
You also need to have FEP 14 for the BI 7.x tools on SAP GUI 6.40, which was just released on Friday. You can find it at service.sap.com/swdc. In the format menu, you will now see a "Link Cells" option.
With the link cells option, you cannot merge across row patterns. That means that you will probably have to make some changes to your report before you can merge the cells, based on what you described.
I imagine that you started out with a report section something like the following (dashes added for formatting purposes):
G0 Header ...
G1 Header -
Controlling Area
Detail -
Func Area
And then moved controlling area to the right to the same column as functional area:
G0 Header ...
G1 Header -
Controlling Area
Detail -
Func Area
Resulting in an output that would look like:
CA1000
FA ABCA
FA ABCB
FA ABCC
CA2000
FA ABCA
FA ABCB
FA ABCC
As shown above, these cells cannot be merged because they cross row patterns. You would instead need to move the controlling area member down to the same row as functional area:
G0 Header ...
G1 Header
Detail -
Controlling Area Func Area
You can now merge these cells, resulting in an output that would look like the following:
CA1000 FA ABCA
CA1000 FA ABCB
CA1000 FA ABCC
CA2000 FA ABCA
CA2000 FA ABCB
CA2000 FA ABCC
To merge the cells, you would simply highligh both cells with your cursor and then select the option from the menu.
Regards,
Katie

Exception (colouring cells) in report output based on formula.

Hi Gurus,
I want to colour my cells in report output. But this coloring is not so simple. It has to be done based on a formula.
Lets say i have material in rows and sales value by period in columns.
.......................Jan'08......Feb'08.......Mar'08.....Apr'08
Material A...........100..........120............105.........140
If Feb'08 values is greater than 0,02*Jan'08 value than ---> Feb'08 has to be coloured as green. etc.
Is it possible to define such a rule for the exception?
Thanks
S.P.

Hi Reddy,
I am using bex 7.0.
I tried that also.
I created another formula in columns with name "Difference" and it calculates the difference.
Report looks like as below:
Material.....Jan'08.......Feb'08.....Difference
ABC............100............120.............0,2
Now, I have to colour Feb'08 column, based on the value under Difference column. But it does not work.
In Exception settings; from Definition tab, I selected Difference column (exception is based on).
In Display tab, I select Feb'08 column.
But it does not work.
Any idea?
Thanks
S.P.

Merging Cells in Report Designer

Hi,
according to SAP Documentation http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/6b9b41aa6ca309e10000000a155106/frameset.htm
it shall be possible to merge cells within Report Designer. However I have tried it on several ways but was never able to find this functionality.
Also I can not find many other of those cell properties described in the link above. Woeking with Frontend Patch 7, Revision 61
Any help is highly appreciated.
Andreas

Hi,
FYI. I am able to merge cells in the Report Designer by selecting multiple cells, and then selecting 'Merge Cells' from the context sensitive menu. I am using the latest SP for ABAP, JAVA, and front-end.
An alternative to merging cells is merging texts within one cell. This will often do.
Regards,
József.

Problem with select all cells in JTable

Hi guys! I get some problem about selecting all cells in JTable. I tried to used two methods:
1> table.selectAll()2> changeSelection(firstcell, lastcell,false,true)
firstcell:[0,0], lastcell[rowcount-1,colcount-1]
Result: only the first row selected when i use both methods.
Note: i set up the selection model as following:
this.dataSheet.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
                this.dataSheet.setCellSelectionEnabled(true);
                this.dataSheet.setRowSelectionAllowed(true);
                this.dataSheet.setColumnSelectionAllowed(true);Thanks !

What selection properity should be changed in order to enable selectAll() method work properly? Is there Any constraints? Here is the TableModel I am using. And i set up selection mode use the following code:
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
table.setCellSelectionEnabled(true);
table.setRowSelectionAllowed(true);
table.setColumnSelectionAllowed(true);
import java.util.Vector;
import javax.swing.table.*;
import javax.swing.JTable;
public class DataSheetModel extends AbstractTableModel{
          private Vector data = new Vector();//Store data
          private Vector columnNames = new Vector();//Store head
          public DataSheetModel(){}
          public DataSheetModel(Vector headVector, Vector dataVector){
               if(headVector != null) this.columnNames = headVector;
               if(dataVector != null) this.data = dataVector;
          public int getColumnCount(){
               return columnNames.size()+1;
          public int getRowCount(){
               return data.size()+1;
          public String getColumnName(int col){
               if(col==0) return "";
               else return (String)columnNames.get(col-1);
          public Object getValueAt(int row, int col){
               if(col==0) {
                    if(row != data.size()) return String.valueOf(row);
                    else return "*";
               else{
                    if(row != data.size()){
                         Vector rowVector = (Vector)data.elementAt(row);
                         return rowVector.elementAt(col-1);
                    }else return null;
          public void setValueAt(Object value, int row, int col){
               if(row != this.data.size()){
                    Vector rowVector = (Vector)data.elementAt(row);
                    rowVector.set(col-1,value);
                    this.data.set(row,rowVector);
                    this.fireTableDataChanged();
               }else{
                    Vector rowVector = new Vector();
                    for(int i=0; i<this.getColumnCount()-1; i++) rowVector.add(null);
                    rowVector.set(col-1,value);
                    this.data.add(rowVector);
                    this.fireTableDataChanged();
          public Class getColumnClass(int c){
               return getValueAt(0,c).getClass();
          public boolean isCellEditable(int row, int col){
               if(col == 0) return false;
               else return true;
          public void setDataVector(Vector head, Vector data){
               if(head != null) this.columnNames = head;
               if(data != null) this.data = data;
}

#RFRs on all cells in Report

Similar Messages

Maybe you are looking for