RFUMSV00 AND COUNTER IN TRVOR

Hi,
I have a problem with report RFUMSV00 (Italy) and table TRVOR.
The problem is referred to the counter (field VZAHL) in TRVOR, the field has the right value but the report starts always by 1.
There was a similar problem with the page number resolved by the oss notes 0001271014.
Thanks in advance for your help.
Regards
Maurizio

Hi,
Please refer the following threads-
System ID in the user defined function
/message/686478#686478 [original link is broken]
As mentioned in the threads, use the method
System.getProperty("SAPSYSTEMNAME"); in udf for getting SYSID.
Counter??? DO you mean record counter..something like that??
You can use the standard count (statistic) or counter(arithmatic) functions for that.Please check the documentation for more help.

Similar Messages

DIFFERENCE BETWEEN SUM AND COUNT IN SQL

DIFFERENCE BETWEEN SUM AND COUNT IN SQL
WHAT IS THE DIFFERENCE VERIFY IN DETAIL/

21031980, I suggest you upgrade your computer sothat you can access google.
lol.
wtfpwnd.Google is also helpful for understanding the strange
acronyms that show up around here lately (yes, I did
find and understand this one). :-)Haha, sorry!
It's the inner-gamer in me rearing its ugly head...
:-)

Counter issues with 2D raster scan and count acquisition

I am building a confocal laser scanning microscope and am currently attempting to develop labview controls for it. I have a fast steering mirror (FSM) which takes analog voltage inputs to control it's x and y angle and I have an avalanche photo diode (APD) which sends a TTL pulse for each photon detection event. For now, I am trying to create a program which will send out two analog signals to create a 2d raster scan with the FSM and count the number of pulses from the APD per pixel. I have been trying to make the program from https://decibel.ni.com/content/docs/DOC-5779 work, but I keep running into counter issues. I am using a generated pulse train from the other counter on my device (NI 6011E) as the period.term input, but I get a "Two consecutive input signals occurred without a counter timebase edge" error if I increase the frequency of the pulse train too high. Unfortunately, the number of pixels I can acquire seems to be limited to twice the frequency of the counter, so I cannot just use a lower frequency train. I believe that the error is occurring because the count rate from the APD is very low and that there are simply no photons hitting the detector in the time period between pulses.This is not a problem, but I would like to know how to simply record a 0 and continue with the scan, rather than have the entire program exit with an error.
Alternatively, if this does not seem like the correct way to accomplish what I am trying to do, I am open to new directions.

So simply ignoring the error did not work, because the DAQmx subroutine stops collection when the error is detected. I think I may need to come up with a different approach to synchronize the counting of TTL pulses with an analog output. Attached below is the code I have been working with.
Attachments:
Raster_2DOutput_wCounter_82.vi ‏45 KB

SSRS report with tabular model – MDX query how to get the sum and count of measure and dimension respectively.

Hello everyone,
I am using the following MDX query on one of my SSRS report.
SELECT NON EMPTY { [Measures].[Days Outstanding], [Measures].[Amt] } ON COLUMNS,
NON EMPTY { ([Customer].[Customer].[Customer Key].ALLMEMBERS) }
HAVING [Measures].[ Days Outstanding] > 60
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM ( SELECT ( STRTOSET(@Location, CONSTRAINED)) ON COLUMNS
FROM ( SELECT ( {[Date].[Fiscal Period].&[2014-06]}) ON COLUMNS
FROM [Model]))
Over here, the data is being filtered always for current month and for a location that is being selected by user from a report selection parameter.
I would like to get the count of total no. of customers and sum of the amount measure.
When I am using them in calculated members it gives incorrect values. It considers all records (ignores the sub-select statements) instead of only the records of current month and selected location.
I also tried with EXISTING keyword in calculated members but there is not difference in output. Finally, I manage the same at SSRS level.
Can anybody please advise what are the ways to get the required sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension?
Also, does it make any difference if I manage it as SSRS level and not at MDX query level?
Any help would be much appreciated.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Can anybody please advise what are the ways to get the required sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension?
Also, does it make any difference if I manage it as SSRS level and not at MDX query level?
Hi Ankit,
We can use SUM function and COUNT function to sum of [Measures].[Amt] and count of [Customer].[Customer].[Customer Key].ALLMEMBERS dimension. Here is a sample query for you reference.
WITH MEMBER [measures].[SumValue] AS
SUM([Customer].[Customer].ALLMEMBERS,[Measures].[Internet Sales Amount])
MEMBER [measures].[CountValue] AS
COUNT([Customer].[Customer].ALLMEMBERS)
MEMBER [Measures].[DimensionName] AS [Customer].NAME
SELECT {[Measures].[DimensionName],[measures].[SumValue],[measures].[CountValue]} ON 0
FROM [Adventure Works]
Besides, you ask that does it make any difference if I manage it as SSRS level and not at MDX query level. I don't thinks it will make much difference. The total time to generate a reporting server report (RDL) can be divided into 3 elements:Time to retrieve
the data (TimeDataRetrieval);Time to process the report (TimeProcessing);Time to render the report (TimeRendering). If you manage it on MDX query level, then the TimeDataRetrieval might a little longer. If you manage it on report level, then the TimeProcessing
or TimeRendering time might a little longer. You can test it on you report with following query:
SELECT Itempath, TimeStart,TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering, ByteCount, [RowCount],Source
FROM ExecutionLog3
WHERE itempath like '%reportname'
Regards,
Charlie Liao
TechNet Community Support

What is the difference between count(*) and count(1)

what is the difference between count(*) and count(1)

Hi,
903830 wrote:
some say count(1) is faster and some say count(*), i am confused about count function?In the link provided by Prakash :
prakash wrote:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1156159920245
You can read :
Followup August 31, 2001 :
I'll have to guess, since you don't say, that you are using 7.x and before when count(*) and count(1) were different (and count(1) was slower). In all releases of the databases for the last 4-5 years, they are the same.
Don't waste your time on that.
;-)

Time Capsule with BT Home Hub - 9 hours of trying to set up and counting...

Hi...I am at my wits end having spent two long evenings trying simply to connect a Time Capsule to an iMac. We have pored over the instructions, read all the postings in all the forums, probably in the entire world (OK, slight exaggeration) and tried every possible combination, and still we end up with a non-responsive Time Capsule (blinking amber light), and the Airport software saying "Waiting for the Time Capsule to restart" in a perpetual loop. The issues may well be around compatibility with the BT Home HUb, but there again they may not. There are no clues about why it fails so consistently in every combination. For the record, these are the combinations we have so far tried: ethernet connection from WAN port on TC to Ethernet port on Home Hub...A wired connection is established successfully. But then immediately the wireless connection wizard starts up, we can't turn it off, and the wireless connection wizard fails. We have tried it in all three combinations of the Wireless wizard. The end result is always the above, the blinking amber light.
We have tried adding the TC without any ethernet connection being involved in the first place. This was the most promising, we actually finally got a green light on the TC itself, but, crucially, NOT in the Airport software: that just hung in the same perpetual loop saying "waiting for Time capsule to restart", even though it CLEARLY HAD RESTARTED (because it gave us the green light). So, after about 9 hours and counting trying to get this "out of the box" solution simply to be recognised by a Mac computer, let alone connected to any other devices in the house (heaven forbid), we are now at our wit's end. Does anyone have any advice?

hi cprelude, I have the same or nearly the setup as you a BT HH V1 and a 500gb timecapsule this is hardwired to bt hh and works well so fear not it can be resolved. first hold the reset button on the HH with the TC disconnected, then while the HH is restarting unplug the TC for a couple of mins then replug inyour TC with the reset switch at the rear pushed in and then let the TC restart and plug in the ethernet cable to thr HH then use Airport utility to connect to the TC. then if all goes well you can set up two wireless networks first being the HH and the second the TC 5ghz. if I was you I would do the first backup on TC via ethernet as the first wireless backup can take hours and hours depending on the amount GBs you already have on your hard drive
good luck
john

Group and count

Hello Friends,
I have a query where I select organization, item_num, and transaction_date.
I need to group and count the result by transaction_date, so I will have 3 groups:
First - will count records where transaction_date falls between the 1st and 10th of the month.
Second - will count records where transaction_date falls between the 11th and 20th of the month.
Third - will count records where transaction_date falls between the 21st and 31st of the month.
The result of this count will be used in the Oracle Report.
Please, give me your advise on how I can achive this.
Thank you.

select organization,
       item_num,
       count(case
               when transaction_date between trunc(transaction_date, 'mm') and trunc(transaction_date, 'mm') + 9 then 1
             end) "1-10",
       count(case
               when transaction_date between trunc(transaction_date, 'mm') + 10 and trunc(transaction_date, 'mm') + 19 then 1
             end) "11-20",
       count(case
               when transaction_date between trunc(transaction_date, 'mm') + 20 and trunc(last_day(sysdate)) then 1
             end) "21-end"
from mytable
group by organization, item_num
Ramin Hashimzade

Windows 7 and counter-strike source shuttering.

I have concluded this is caused by creatives driver by disabling the card in device manager the shuttering is gone. Is there a work in progress for this or some kind of work around until it is fixed?

Re: Windows 7 and counter-strike source shuttering. Found a simple work around until someone can fix this, found this over in the sevenforums.com
Hi there, I've recently had an extremely annoying issue regarding sound, games, multiplayer, and Windows 7. When I would start up a game (such as Counter-Strike Source or Heroes of Newerth) and connect to server, my fps and ping would be nominally ok, but the game would lag. In HoN this would be displayed by the heroes moving jerkily around the map, even though my fps and ping were good. In Counter Strike, this evidenced itself by glitchy nades that don't bounce smoothly, and whenever sounds are played, the ping spikes a bit. It's kind of like playing on a 33 tic server, for those of you familiar with the game. None of these issues occurred in single player games or in the aforementioned games with a local server.
Anyway, I searched and searched here and couldn't find anything, but finally I found something in Google:
Stop and disable the "Multimedia Class Scheduler" service<
Run regedit and go to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi ces\Audiosrv"<
Double click on the entry "DependOnService" and delete the line with "MMCSS" from the text box<
Reboot and enjoy lag free games<
This fixes issues with Realtek '97 (my motherboard uses nforce 4 chipset), and I'm guessing it will also fix issues with Creative Audigy 2 ZS, which I also have installed at the moment, but haven't tested.
I diagnosed the issue by realizing that by disabling audio devices in device manager, lag would disappear in-game. So glad I found this solution after installing 6 different audio drivers and generally being very frustrated. Just thought I'd leave this here as a reference for others with a similar issue.
Original solution by Mirkon. Thanks!

Sender System and Counter in Receiver file

Hi,
I have a requirement of having 'Sender Sytem ID' and 'Counter' in receiver flat file.
Please suggest, what is the best way to achieve this.
Scenario : ABAP --> PI ---> Legacy System
Proxy to File scenario
regards
Amol

Hi,
Please refer the following threads-
System ID in the user defined function
/message/686478#686478 [original link is broken]
As mentioned in the threads, use the method
System.getProperty("SAPSYSTEMNAME"); in udf for getting SYSID.
Counter??? DO you mean record counter..something like that??
You can use the standard count (statistic) or counter(arithmatic) functions for that.Please check the documentation for more help.

Reading a file, and counting how many e's there's in it!

Hello everyone!
Well, I'm trying to write a program that'll read a file and count the number of e's in there and print it out.
This is what the Index.txt file contains:
In Xanadu did Kubla Khan
A stately pleasure-dome decree:
Where Alph, the sacred river, ran
Through caverns measureless to man
Down to a sunless sea.And this is my source code:
import java.io.*;
public class Appearance{
    public static void main(String[] args) throws IOException{
     index = new BufferedReader(new FileReader(("Index.txt")));
        while((letter = index.readLine()) != null){
   if(letter.contains("e")){
       eCount++;
System.out.print(eCount + "\n");
if(index != null){
      index.close();
   index = null;
private static BufferedReader index = null;
private static String letter = null;
private static int eCount = 0;
}But for some reason when I run it, the output is 4?.. Please tell me why, as I figured that this should work.. :O.

Vimsie wrote:
But for some reason when I run it, the output is 4?.. Please tell me why, as I figured that this should work.. :O.Because you are counting the number of lines that contain one or more 'e's. You don't count the occurances.

VB 2012 - Help Finding Specific Numbers in a Database Column and Count the Number of Times They Appear.

Hello,
I am doing a project that uses MS Access to access data about a baseball team . The MS Access Database provides the names, addresses, and age of the players. All the players are 12, 13, or 14 years old. I need to display the average age for the team on a
label, which was easy. The problem is that I also have to display the number of players who are 12, 13, and 14 years old and I have no idea how to do that.
Here is my code so far:
Public Class frmBaseball
Private Sub TeamBindingNavigatorSaveItem_Click(sender As Object, e As EventArgs) Handles TeamBindingNavigatorSaveItem.Click
Me.Validate()
Me.TeamBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.LittleLeagueDataSet)
End Sub
Private Sub frmBaseball_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'LittleLeagueDataSet.Team' table. You can move, or remove it, as needed.
Me.TeamTableAdapter.Fill(Me.LittleLeagueDataSet.Team)
End Sub
Private Sub btnAges_Click(sender As Object, e As EventArgs) Handles btnAges.Click
Dim strSql As String = "SELECT * FROM Team"
Dim strPath As String = "Provider=Microsoft.ACE.OLEDB.12.0 ;" & "Data Source=e:\LittleLeague.accdb"
Dim odaTeam As New OleDb.OleDbDataAdapter(strSql, strPath)
Dim datAge As New DataTable
Dim intCount As Integer = 0
Dim intTotalAge As Integer
Dim decAverageAge As Decimal
odaTeam.Fill(datAge)
odaTeam.Dispose()
For intCount = 0 To datAge.Rows.Count - 1
intTotalAge += Convert.ToInt32(datAge.Rows(intCount)("Age"))
decAverageAge = Convert.ToDecimal(intTotalAge / datAge.Rows.Count)
Next
lblAverage.Visible = True
lblAverage.Text = "The average age of the team is " & decAverageAge.ToString("N2")
lbl12.Text = "The number of 12 year olds is "
lbl13.Text = "The number of 13 year olds is "
lbl14.Text = "The number of 14 year olds is "
lbl12.Visible = True
lbl13.Visible = True
lbl14.Visible = True
End Sub
End Class
I think I should use a For..Next loop but I don't know how to identify and match using this database, and then count how many repeated 12, 13, 14 years old there are.
Any help would be really appreciated.

Hello,
Conceptually speaking you would group the data and count. Beings this is school work the demo below is a static example and not suitable for your assignment, its to show a point. Now if you have learned about LINQ and Lambda this logic can apply to your
question but need to work out using this your data which can be done. If not look at using SQL Grouping.
Example of SQL grouping and count
select country, count(country) as count from customers group by country
Module Module1
Public Sub GroupingDemo()
Dim dt As DataTable = SimulateLoadFromDatabase()
Dim TeamData = dt.AsEnumerable.GroupBy(
Function(student) student.Field(Of Integer)("Age")) _
.Select(Function(group) New With
Key .Value = group.Key,
Key .Info = group.OrderByDescending(
Function(x) x.Field(Of String)("Name"))}) _
.OrderBy(
Function(group) group.Info.First.Field(Of Integer)("age"))
Dim dictData As New Dictionary(Of String, String)
For Each group In TeamData
Console.WriteLine("Group: {0} count: {1} ", group.Value, group.Info.Count)
dictData.Add(group.Value.ToString, group.Info.Count.ToString)
' The following is not needed but good to show
For Each item In group.Info
Console.WriteLine(" {0} {1}",
item.Field(Of Integer)("Identifier"),
item.Field(Of String)("Name"))
Next
Next group
Console.WriteLine()
Console.WriteLine("This data can be used to populate control text")
For Each Item As KeyValuePair(Of String, String) In dictData
Console.WriteLine("{0} {1}", Item.Key, Item.Value)
Next
End Sub
Private Function SimulateLoadFromDatabase() As DataTable
Dim dt As New DataTable With {.TableName = "MyTable"}
dt.Columns.Add(New DataColumn With {.ColumnName = "Identifier", .DataType = GetType(Int32),
.AutoIncrement = True, .AutoIncrementSeed = 1})
dt.Columns.Add(New DataColumn With {.ColumnName = "Name", .DataType = GetType(String)})
dt.Columns.Add(New DataColumn With {.ColumnName = "Age", .DataType = GetType(Int32)})
dt.Rows.Add(New Object() {Nothing, "Bill", 13})
dt.Rows.Add(New Object() {Nothing, "Karen", 14})
dt.Rows.Add(New Object() {Nothing, "Jim", 13})
dt.Rows.Add(New Object() {Nothing, "Paul", 15})
dt.Rows.Add(New Object() {Nothing, "Mike", 14})
dt.Rows.Add(New Object() {Nothing, "Jill", 13})
Return dt
End Function
End Module
Output in the IDE output window
Group: 13 count: 3
3 Jim
6 Jill
1 Bill
Group: 14 count: 2
5 Mike
2 Karen
Group: 15 count: 1
4 Paul
This data can be used to populate control text
13 3
14 2
15 1
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Read Text file and count occurences of certain string

Hello,
I have a text file with lines of data in it. I would like to read this text file and count how many lines match a certain string of text.
For example my text file has this data in it.
dog,blue,big
dog,red,small
dog,blue,big
cat,blue,big
If the certain string of text is "dog,blue,big" then the count would return "2".
Thanks for your help

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
In addition, if you are working with Windows Forms app. please consult on Windows Forms Forum:http://social.msdn.microsoft.com/Forums/windows/en-US/home?category=windowsforms
If you are working with WPF app, please consult on WPF forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wpf
If you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Visual Studio Language Forums:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vslanguages
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Total count and count based on column value

Primaryid Id     Status
1            50          1
2            50          1
3          50          1
4            50          3
5           50          2
6            50          1
7            51         1
8            51         2Im looking for a query which returns total count of rows for id 50 and count of rows with status 1
something like
Id    count_total   count_total_status1
50        6              4
51        2              1Any suggestion ?

SQL> select * from t4;
PID ID STATUS
1 50 1
2 50 1
3 50 1
4 50 3
5 50 2
6 50 1
7 51 1
8 51 2
已选择8行。
SQL> select distinct id,count(id),sum(decode(status,1,1,0)) from t4 group by id;
ID COUNT(ID) SUM(DECODE(STATUS,1,1,0))
51 2 1
50 6 4

Max, Min and Count with Group By

Hello,
i want the max, min and count of a table, which is grouped by a column
I need a combination of these two selects:
select
     max(COUNTRY_S) MAXVALUE,
     min(COUNTRY_S) MINVALUE
from
     tab_Country
select
     count(*)
from
     (select COUNTRY_TXT from tab_Country group by COUNTRY_TXT) ;
The result should be one row with the max and min value of the table and with the count of the grouped by table, not the max and min of each group! - i hope you understand my question?
Is this possible in one SQL-select?
Thank you very much
Best regards
Heidi

Hi, Heidi,
HeidiWeber wrote:
Hello,
i want the max, min and count of a table, which is grouped by a column
I need a combination of these two selects:
select
     max(COUNTRY_S) MAXVALUE,
     min(COUNTRY_S) MINVALUE
from
     tab_Country
select
     count(*)
from
     (select COUNTRY_TXT from tab_Country group by COUNTRY_TXT) ;
The result should be one row with the max and min value of the table and with the count of the grouped by table, not the max and min of each group! - i hope you understand my question?
Is this possible in one SQL-select?
Thank you very much
Best regards
Heidi
It's not clear what you want. Perhaps
SELECT MAX (country_s)               AS max_country_s
,       MIN (country_s)               AS min_country_s
,       COUNT (DISTINCT country_txt) AS count_country_txt
FROM    tab_country
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

EXHAUSTED!!! 25 DAYS AND COUNTING FOR INSTALL!

Well its got to the point where i think ive just about had it with BT im appalled by them now!!!up to now ive been kept well informed as to what's been going on without me having to ring them .Then Last Friday the day that finally i was gonna get my final appointment (the 4th appointment) i was told yet another excuse/reason as to why this wasn't going to happen and that it will take 48 hrs to sort, so tuesday will now be the day i get my appointment, i was then sent a text with a number and to call if it wasn't sorted by tuesday which is when they were suppose to ring me again with an update but i didn't get the call (the 1ST time)?
so i called the number i got texted and its the infinity call centre in Dundee well guess what? the problem still persists and that they sent a request but it still hasn't been answered so it could well be another 48 hrs until openreach respond, i asked for a manager to call me back because the person at the call centre was just not bothered atall about my situation and sounded uninterested,well that didn't happen either.
My MAC code runs out on the 20th that will be a month since i ordered, just over infact!!! i ordered 17th march.And just to add insult to injury my BT account states that the total order was complete on the 7th april(my 3rd appointment date)and they will be taking the 1st month broadband payment off me by DD on the 23rd april. I KNOW ITS HARD TO BELIEVE BUT ITS ALL TRUE!!!
SO I WARN ANYONE THINKING OF DEALING WITH BT THINK HARD AND LONG???
days off work,3 engineer appointments,25 days and counting for install,paying for a service i havnt got and uninterested customer services and managers not returning calls.WELCOME TO BT!!!
WATCHDOG,CISAS,OFFICE OF FAIR TRADING AND THE MAN HIMSELF IAN LIVINGSTON. all getting emails.

I read through your thread Boostmonkey like you say similar in alot of ways,only i wished id read your thread earlier as i mite have got things done sooner(infact i don't know how i missed it).Ive had some progress today but im not saying anything as im still waitng for some concrete confirmation.
Good luck with it anyway. let me know how you get on.

RFUMSV00 AND COUNTER IN TRVOR

Similar Messages

Maybe you are looking for