RFWT0020 withholding tax data - Data Regen vs. Change to Source Tax Code?

Can anyone explain the difference between these two options when running RFWT0020 to update withholding tax data? Data Regeneration vs. Changes to Source Tax Code? I can't find any mention of the two options in the program documentation
When I do test runs with the two different options, the program is selecting difference documents to update. If we are just turning on the 1099 functionality now (beginning with the 2011 tax year), should I run the program once with Regeneration mode and once with Changes to Source Tax Code???
Thanks for any advice!
Allison

Hi,
he program enables the withholding tax code to be changed for reconciled and open items with existing withholding tax data. For this, the tax rate of the existing withholding tax data as well as the tax rate of the new withholding tax code must be 0%. The new withholding tax codes are taken from the customer or vendor master data. In the case of extended withholding tax, the withholding tax code is only changed if the related withholding tax categories are the same. The withholding tax base amount is not changed by this procedure.
Recreating or changing the withholding tax data requires that the program first be executed for invoices and then executed for payments in a subsequent step.
When you start the program, the selection screen appears. You can make selections according to vendors, tax code 1, tax code 2 (vendor master record), customers, tax code 1, tax code 2 (customer master record), company codes, document numbers and posting data. The selection determines which items are checked for possible subsequent entries in tables BSEG, BSAK, BSIK, BSAD, BSID, WITH_ITEM.
You can also decide whether only withholding tax data is to be handled for cases where the documents in question contain no withholding tax data. There is no withholding tax data if no withholding tax entries exist for the item selected in table WITH_ITEM (extended withholding tax) or the die withholding tax fields in table BSEG are not filled.
The selection can also be made in test mode. If you do this, no changes are made in the database. You are therefore advised to run the program in test mode initially.
Regards
Aditya

Similar Messages

Withholding tax master data report changes in SAP FI

Hi All,
In our client according to new audit requirements improvements have to be done for the withholding tax report. According to the the requirements changes only functionality has to be added to the main selection screen of the withholding tax master data report.
Changes only functionality has to be added to the selection screen of the report, the report has to display changes made to the tax master data with in a range of period, this was achieved easily by making program changes. Only issue now is when we do it in development client its showing us properly but when we do it in production it is not working because when ever we do any configuration changes we do it in the development client and transport it to production client so the changes done to any configuration with respect to WHT are not recorded in the production environment as they are transported from development client.
So, we are unable to achieve this in production client, please help me out with this issue.
Tthanks in advance

hi
i need field
withholding tax exemption no, exemption from date, todate, Exemption reason,
as a master data it is saved in vendor master data > withholding tax accounting
but i need where it is saved in transaction data.
thanks

Substitution for Tax reporting date

Hi,
I have created a substitution at document header level to change Tax Reporting date field.
It works correctly when I enter a fixed value or another field value, but when I enter a user exit it does not work in VF11 transaction
Which could be the problem?
Thanks

Dear expert
Problems calculating tax reporting date in VF11 transaction
user exit VF11 for accounting
Regards
Ajeesh.s

Tax Reporting Date for Cz Republic in report S_ALR_87012357/RFUMSV00

Hi All,
We activated Tax reporting date as per SAP Note 1023317. However we are not able to see in the report "S_ALR_87012357 / RFUMSV00" tax reporting date column which should show which document has which date assigned to it. I executed the report with tax reporting date.
Please help me to find out how to get the column in this report.
Regards,
Abishek

hi Giovanni Baumann .,
will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
Regards.,
S.Sivakumar

SLA Dates needs to be changed manually by user.

Hi,
I have a requirement that The SLA dates need to be changed manualy by a user (for a service request) based on the authorisation of a user. Is there any enhancement or related to config.?
thnks in advance.

Hi,
I am not sure how ur business is running on. let me tell if u r doing the transaction in the webui are ic agent make sla date fields in display and edit mode based on the authorization or the business role. in case of gui not sure you need to debug and identify the authorization object for that one.
regards,
gobi

Default key date, Document date and posting date needs to be changed automa

Hi Experts,
The user wants to create a variant for Foreign currency valuation, wherein the default key date, Doc date and Posting date needs to be changed every month automatically. Is it possible?
Please let me know your thoughts.
Warm regards,
Murukan Arunachalam

Hi
Please follow this process.
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data.
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.

Uploading TAX Classification data in material master

Hi,
I have to upload tax classification data in material master for countries DE,IT,FR,ES,CH and GB.
I have used BAPI_MATERIAL_SAVEDATA and passing values to table TAXCLASSIFICATIONS.
But bapi is uploading tax classification only for country DE.
When I am creating through MM02 its getting updated.
Can anybody tell me what is the problem ?

Hi Ganga,
Yes I am passing different countries to table .
LOOP AT IT_STAX into WA_STAX.
       wa_taxclassifications-depcountry = wa_stax-aland.
        wa_taxclassifications-tax_type_1 = wa_tstl-tatyp.
        wa_taxclassifications-taxclass_1 = wa_stax-taxm1.
        wa_taxclassifications-tax_ind    = wa_stax-taxim.
        APPEND wa_taxclassifications TO it_taxclassifications.
ENDLOOP.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata           = wa_headdata
      TABLES
        taxclassifications = it_taxclassifications
        returnmessages     = it_return[].

Data recovery after filesystem change ntfs- ext4

so here's my story:
i wanted to instal arch on a friend's machine and it was a success. BUT i accidentaly used a wrong partition and changed the filesystem from ntfs to ext4.
normally i would use something to recover my data but the filesystem change bothers me.
is it even possible to recover anything from it?
i have heard that test disk would be able to do this task, but there's a probability of damaging other partitions.
what do i do?
any help is appreciated

jakobm wrote:
robug wrote:BUT i accidentaly used a wrong partition and changed the filesystem from ntfs to ext4.
What exactly did you do? As far as I know, there is no way to 'change filesystems'.
Did you run a mkfs.ext4 on said partition?
the partition has beed formated from ntfs to ext4 while instalation. so it has arch on it at the moment

How to get Inserted Date in Headers to change daily

Using the latest version of Pages, how can I insert the Date and Time in a Header so that it changes automatically on a new date?
Thanks for your help!

Hello Sol Berger
To change the setting on the inserted Data & Time, either right click or option click the date and there is an option that says Automatically update on open that would need to be checked to update when you open the document.
Pages '09: Adding Page Numbers and Other Changeable Values
http://support.apple.com/kb/PH10343
To add and format the date and time, place the insertion point where you want the value to appear, and then choose Insert > Date & Time.
To change the date and time format, Control-click the date and time value, choose Edit Date & Time, and then choose a date and time format from the pop-up menu. If you want the document to always show the current date and time, select “Automatically update on open.”
Regards,
-Norm G.

Time/date on my iPhone changes every time I sync with iTunes - any fix?

Hi All,
Every time I sync my phone with my computer, the time and date on my phone changes - it goes to one week behind, and about 10 hours earlier than it actually is. My computer calendar has the right time (NYC time zone), the calendar support settings on my iPhone are set to NYC time zone - what could be happening? Any ideas?
Thanks,
Maria

msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P.

Activate tax reporting date (VAT due date) Spain

Dear all,
My Spanish customer should start using electronic VAT book, Modelo 340. If I understood correct VAT due date (activate tax reporting date) is a prerequisite for this? If I activate this functionality in their system, what affect will this have except a new field?
Is it possible to do this during a year or should it be done in the beginning of a new year, from 1st of January? Does it matter?
What affect will it have on already existing documents?
If they start to use electronic VAT book, do they not need to use the ordinary Tax report, transaction S_ALR_87100833, then and use only this instead?
Please help me to understand how to tell the customer of how this will affect them.
BR L

Hi Paul,
I have already red these notes but don´t think that my questions are answered by these. Escpecially the question if ordinary tax report, program RFUMSV00 (transaction S_ALR_87100833) are replaced by Modelo 340, is not answered.
Could you please help?
BR L

I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

Po tax related data

hi experts,
can u tell me where the tax related data is stored(tables) for the po created

Kiran,
KONV-KSCHL = Condition type.
KONV-KBETR = Condition value.

Change function to work for date data type

I have found the below function form the AstTom page. This function works perfectly when i pass varchar datatype and I am wondering what do i need to change here of course the datatype inoder
for this function to accept date value. example I want to pass (05/21/2010, 04/23/2010) as a date data type and
--create your type
create or replace type varcharTableType as table   of varchar2 (255);
CREATE OR REPLACE FUNCTION tplcp.in_varchar (p_string IN VARCHAR2)
   RETURN varchartabletype
AS
   l_string   LONG             DEFAULT p_string || ',';
   l_data     varchartabletype := varchartabletype ();
   n          NUMBER;
BEGIN
   LOOP
      EXIT WHEN l_string IS NULL;
      n := INSTR (l_string, ',');
      l_data.EXTEND;
      l_data (l_data.COUNT) := LTRIM (RTRIM (SUBSTR (l_string, 1, n - 1)));
      l_string := SUBSTR (l_string, n + 1);
   END LOOP;
   RETURN l_data;
END in_varchar;
CREATE OR REPLACE PROCEDURE planholderslist (
   p_letting_date   IN       VARCHAR2,
   p_results        OUT      sys_refcursor
AS
BEGIN
   OPEN p_results FOR
      SELECT DISTINCT DECODE (TRIM (MIN (j.route)),
                              NULL, 'N/A',
                              TRIM (MIN (j.route))
                             ) routenumber,
                      l.lcontid contractid, (q.cdescr) jobdescription,
                      INITCAP (q.clocat1 || q.clocat2) LOCATION,
                      SUBSTR (q.cprojnum, 1, 10) projectnumber,
                         SUBSTR (l.letting, 3, 2)
                      || '-'
                      || SUBSTR (l.letting, 5, 2)
                      || '-'
                      || SUBSTR (l.letting, 1, 2) lettingdate
                 FROM vendor v,
                      vendaddr r,
                      letprop l,
                      planhold p,
                      proposal q,
                      project j,
                      propproj k,
                      bidlet bd
                WHERE v.vendor = r.vendor
                  AND k.contid = q.contid
                  AND k.pcn = j.pcn
                  AND l.lcontid = k.contid
                  AND p.vendor = v.vendor
                  AND l.letting = p.letting
                  AND (TO_CHAR (bd.datelet, 'MM/DD/YY') IN (
                                      SELECT COLUMN_VALUE
                                        FROM TABLE (in_varchar (p_letting_date)
                  AND l.CALL = p.CALL
                  AND r.addrnum = p.billto
                  AND bd.letting = l.letting
             GROUP BY q.cdescr,
                      q.clocat1,
                      q.clocat2,
                      bd.letting,
                      l.letting,
                      l.lcontid,
                      q.cprojnum
             ORDER BY lettingdate;
END planholderslist;
/

three or even four dates passed to the parameter.4 date parameters are still easy to code for. Use an IN clause.
Just do something like this:
SQL> select * from t;
D
05-JAN-2010 00:00:00
15-MAR-2010 00:00:00
09-SEP-2010 00:00:00
07-DEC-2010 00:00:00
SQL> create or replace
2 procedure find_date (rc out sys_refcursor
3                      ,p1 in date
4                      ,p2 in date default null
5                      ,p3 in date default null
6                      ,p4 in date default null
7                      ) as
8 begin
9    open rc for
10       select d
11       from   t
12       where d in (p1,p2,p3,p4);   -----<<< notice this line
13 end;
14 /
SQL> var results refcursor
SQL> exec find_date(:results, to_date('05-JAN-2010'));
PL/SQL procedure successfully completed.
SQL> print results
D
05-JAN-2010 00:00:00
SQL> exec find_date(:results, to_date('05-JAN-2010'),to_date('09-SEP-2010'));
PL/SQL procedure successfully completed.
SQL> print results
D
05-JAN-2010 00:00:00
09-SEP-2010 00:00:00
SQL> exec find_date(:results, to_date('05-JAN-2010'),to_date('09-SEP-2010'), sysdate);
PL/SQL procedure successfully completed.
SQL> print results
D
05-JAN-2010 00:00:00
09-SEP-2010 00:00:00
SQL> exec find_date(:results, to_date('05-JAN-2010'),to_date('09-SEP-2010'), to_date('15-MAR-2010'), to_date('07-DEC-2010'));
PL/SQL procedure successfully completed.
SQL> print results
D
05-JAN-2010 00:00:00
15-MAR-2010 00:00:00
09-SEP-2010 00:00:00
07-DEC-2010 00:00:00

RFWT0020 withholding tax data - Data Regen vs. Change to Source Tax Code?

Similar Messages

Maybe you are looking for