RFx: Function Module to get unpublished (saved only) items
Hi there,
Can anyone please help me out?
I am looking for a FM in SAP SRM to get not only the published items on a RFx, but also the newly added Items that were only saved.
If I use FM: BBP_PD_BID_GETDETAIL, I get all items on a published RFx.
But when I add a new Item, It is not in the E_ITEM output-structure until the RFx is published again.
Is there a FM in SAP SRM that also outputs the non-published items (saved only)?
This must be quit a common requirement I think, but I cannot find it out myself.
Thank you!!
Regards, Walter.
Hi Robin,
Thank you, that is helping me!
I am using the Object-ID (5700000xxx) as input for BBP_PD_BID_GETDETAIL.
In the result I see structure E_VERSION with 5 entrie. So from this E_VERSION list I have to find the latest/newest entry or the ChangeVersion.
Thanx again!
Similar Messages
-
Function module to get adress in line items
Dear All
I am using a function module ADDR_GET which is giving me the data in a specific format of addr_val1, Now the requirement is to display the data in a script , so that the address comes as address line 1 ,line 2 and likewise.... Kindly let me know if there are any function modules in this regard <Priority normalized by moderator>
Edited by: Vinod Kumar on Dec 30, 2011 4:33 PMhello!
i think you could use the address node. It formats the address automatically according to the postal regulations of the sender country...you only need to pass the adrnr to it.
the link below gives more info abt. the address node.
http://help.sap.com/saphelp_nw70/helpdata/en/d2/69a151cd8b11d3b563006094192fe3/content.htm -
Function module to get the sequence numbers based on PERNR & payroll period
Hi,
Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
SatyaI think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = p0001-pernr
TABLES
in_rgdir = it_rgdir
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
AND paydt <= v_endda AND
void IS INITIAL
AND ocrsn IS INITIAL
AND srtza = 'A'.
v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran -
Function Module to get Old materials
Hello,
Is there any function module to get all old materials for a material from MARA?? There can be many old materials for a material
If not, What logic should I apply to get all old materials?
Thank you.
APBISMIT will only give one lastest old material. But the this old material can have numerous other old materials.
AP -
Function module for getting Vendor Address details
Hi,
Im new to this group,and new to ABAP
plz hep me out by solving ABAP Query...
i want to generate a report for getting Vendor Details
like Vendor address,Ph num and Email
input fields are Company code,country key and Account Group.
im Using Smart Forms for this..
but im not getting the Exact Function module to get All Required Details..
regards
Smithathanks for ur quick reply...
SELECT SINGLE LIFNR
FROM LFB1
INTO V_LIFNR
WHERE BUKRS EQ V_BUKRS.
CALL FUNCTION 'VENDOR_READ'
EXPORTING
i_bukrs = V_BUKRS
i_lifnr = V_LIFNR
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the code i have written...
but my problem is there no table in the Function module....
for Example...
CALL FUNCTION 'QPAX_PLMKB_READ_FROM_PLKO'
EXPORTING
i_plnty = 'Q'
i_plnnr = V_PLNNR
I_PLNAL = V_PLNAL
i_sttag = V_DATUV
TABLES
T_PLMKB_TAB = IT_TAB
i want the function modules with tables and proper input... -
Function module for getting the open qty
HI experts,
I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
Can you suggest any function module to get this open PO quantity.Hello,
Hope this link can help you.
[Po Open Quantity;
Thanks
Jayant -
ABAP - Function module to get the number of working days between 2 days
Hi gentlemen,
I have been asked to produce a report that gives the number of working days between 2 days, based on a calendar.
I didn't find anything...
Has any of you already written a function module to get this ?
A great thanks in advance.
Jacques LagrifHi ,
you can try this ,
when you require the number of working days between D1 and D2
Total No of Days will be
D2 - D1
No of holidays between D1 and D2 , use the FM HOLIDAY_GET
Pass the From date , to date , and the factory calendar to get the of Holidays
Total no of days - Number of Holidays will your Working days
Regards,
Sathya -
Function Module to get the Screen
Hello All,
Can anybody provide me a Function Module to get the Screen by giving Program Name and Screen Number.
Thanks,Hello
check FM RS_IMPORT_DYNPRO
CALL FUNCTION 'RS_IMPORT_DYNPRO'
EXPORTING
dylang = pmlang
dyname = programname
dynumb = screen
IMPORTING
header = header
TABLES
ftab = ifields
pltab = iflowlogic.
or you have to create join b/w table reposrc and tadir .
Thanks
Anirudh -
Function module to get the details (WTGBTR) from table COEP
Hi all,
I have to select the data from COEP table based on OBJNR, KSTAR and KOKRS.I want WTGBTR from COEP Table.
Right now Iam using select query.But i want to use function module.
Can any one please tell me is there any function module to get WTGBTR from COEP table.
Thanks.This'll work:
SELECT objnr bukrs wtgbtr
INTO CORRESPONDING FIELDS OF TABLE gt_coep
FROM coep
WHERE lednr = '00' "<========
and kokrs = '1000'
AND kstar IN ('0000810001' , '0000830001')
AND objnr IN s_objnr
AND bukrs IN s_bukrs.
Rob -
Function module to get pernt by passinf objid and otype
Hi,
Help me to find any function module to get pernr by using objid and otype.or table name from which we can get pernr by passing objid and otype.
thanks,
satish.You are talking about on the OM side and obtain the perner via object P?
You can through a few method. One is using evaluation path. There is a function module called HR_STRUC_GET which allow you to pass evaluation path to get the result.
Using that, you could create a simple evaluation path from position (object s) to person (object p). The object ID of object P is your pernr.
Unless you have central person functionality, that might no longer be the case. -
Function module to get table description
Is there any function module to get table description on passing table name
Hi,
We need to use : 'G_RW_TABLE_DESCRIPTION_GET' function module.
we pass the table name and the language.
call function 'G_RW_TABLE_DESCRIPTION_GET'
exporting
rw_table = p_table
langu = sy-langu
importing
tab_text = l_tabtext
exceptions
others = 1.
thanx. -
Table or Function module to get Internal order planning and Cost element pl
Dear All,
Table or Function module to get Internal order planning and Cost element planning.
Internal order planning from T-code KO13.
Thanks in advance.
Regards,
Ravi
Edited by: Ravi Chandra on Sep 13, 2011 8:08 AMBPEJ, BPEG, BPEP
-
Function Module to get pernr number based on first name and last name
Hi All,
What is the Function Module to get pernr number based on first name and last name.
Could you please help me.
T@R.
Vidyahi Vidya,
you can get perner from PA0002 based on firs name and last name.
use select query and get perner. -
Function module to get customer balances
Hello , is there a FM to get customer balances?
hi Sooness,
i am not sure but you can check with the BAPI:
BAPI_AR_ACC_ GETKEYDATEBALANC E
function module to get AR (customer balance).
and also have a look in the link below:
http://www.sapbapi.com/bapi-list/
http://www.erpgenie.com/abap/functions.htm
With luck,
Pritam. -
Function module to get BOM which WOULD be created if I open a production
Is there a function module to get the BOM which WOULD be created if I open a production order?
note that I don't have the produciton order created.
I already tried with the FM CS_BOM_EXPL_MAT_V2 and CSAP_MAT_BOM_READ.
I debuged the CO01, but I did not find it.
This BOM should include materials which are under a phantom component.
Edited by: Rodrigo Pelos on Jul 20, 2011 6:55 PMHi Greetson Shunmugasundaram,
thanks for the reply, but for the FMs CO_SD_RESB_FROM_BOM_CREATE and CO_SD_NEW_BOM_ASSIGNEMENT it's necessay to have an production order but I don't have it. And with CS_ALT_SELECT_COUPLED_PRODUCT I could not get a BOM.
Let me explain in more details how I'm going to use this information, I think I was not clear in my post.
I'm creating a report to compare the BOM of a production order with BOM which would be created today if I open a production order.
Then I can check if there was changes in the reservation (RESB) of the production order. If this changes happened, how many pieces. I'll check also if there was differences in consumption, because during the production order confirmation it is possible to make changes.
I would not like to make the BOM explosion "manually" because there are too many variables in the BOM like phantom, alternative, scrap and so on, but I don't know if the function module that I'd like to use exists.
Maybe you are looking for
-
Seller of a locked iPod is not available anymore
Ho to unlock an iPod if the seller has it still locked in his account but is not available anymore?
-
Different valuation way in sales and returns of goods
Hi all, we experience some problems in using, at the same time, the scenario of third-party order processing for sales to the customer and the standard flow to manage the return flow. As standard the goods entry (movement type 653, special stock E) o
-
Searching for multiple images across different volumes?
Hi, is there a way or an app that can search for different images across various volumes? I need to locate 200 images for an InDesign file across 3 server volumes. Thanks, Bill
-
Magic mouse 0% battery level - But batteries are new!
I just received my Magic Mouse today. It paired fine,connected fine and worked fine until I downloaded the software. Then the tracking became extremely slow and jerky. Tthe worst part is that the Battery level says 0% and I keep getting a pop-up wind
-
C# Weather App (Help please)...
I'm trying to develop a very simple C# application that should be able to tell the user the current temperature using the zip-code or city name. I don't have any knowledge on how XML works. I can only work with C#. So can someone please guide me with