RG1 register not tallying with MB5B stock

Hi
I have updated in J1i5 & extracted the register in J2i5, in which few issue entries (201 mvt) are not reflecting in RG1 Register.
When I try to re-run the issue entries in J1i5 under classification IDH, IWE, IWO - entries are not getting registered instead red light indicator is  shown with error "processing over of 0 records Message no. 8I300
Pls help
Regards
P Karthikeyan

Could anyone help on this

Similar Messages

  • Valuated project stock not allowed with customer stock.

    Hi,
    I am trying to create invoice correction request for credit with the reference of invoice
    the invoice data is not copying into sales order. I am getting the error "Valuated project stock not allowed with customer stock".
       My question is can we have any routine in copy controll to fulfill my requirement or do i develop a new routine?
    Thanks in advance.
    Regards,
    Narayana

    Hi
    Did you find any sloution for this problem?
    I am facing the similar error.
    Inputs will be helpful
    Thanks
    Regards
    DDP

  • Reg:F.19 report figures are not tallying with gl account 208030. Why?

    hi boss
    F.19 report figures are not tallying with gl account 208030. Why?
    pls urgent
    amk

    Hi,
    We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
    Is this the reason, that the system is showing differances in F.08 report.
    Kindly help me
    Thanks
    Kishore
    Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

  • Assets balance Report(T Cd s_alr_87011964) Not Tally with GL Code in FBL3N

    Hi Friends
    SAP Standard Assets balance Report(T Code s_alr_87011964 and s_alr_87011963 ) Not Tally with GL Code in FBL3N.
    In SAP report coming with Report Date but FBL3N coming with Posting Date
    So How I add Posting Date input parameter in Sap Standard Report. Please help me
    Thanks & Regards,
    Hemant Kumar

    Hi Vinod,
    I hoe that you are doing reconcilation between Asset ledger & FI ledgers. Before that just run ABST ,there u can findout whatever the documents not assigned to FI.
    Asset is subledger to GL.It is automatically updated through determination,while post GRN to capital goods.In somecases bsuiness remove the reconcilation acount and do some adjustments that time that report not match with FBL3N.
    You can run ABST then u can get details
    Best rgds
    Mani

  • AR01 REPORT IS NOT TALLYING WITH GL BALANCE

    Dear SAP Guru's
    AR01 report is not tallying with CWIP gl. during our observation, we found that out of four CWIP assets two of them showing over balance and two of them showing under balance. but when i tried for settling these assets to actual assets, system shows no value for settlement. But when i try for Scrapping, system is allowing for scrapping from these CWIP assets. In General, when ever value is lying in the CWIP, system will allow for settlement, but why in these case it is not allowing. What could be the reason ..for .CWIP assets shows Under/Over value. 
    Please advice.
    regds

    Dear Ravi..
    Thanks for your early reply...
    01. As per the Program documentation, it shows that these report should be executed only before year end closing.
          Is there any effect if i execute now.
    02. For Your information, i know the exact difference of balance which both AR01 and CWIP GL shows, so to what extent this program ABST2)will help.
    03.It would be helpful to me  if you have any solution to resolve it.
    04. Actually this problem was existing from more than 3 fiscal years...our auditors did not recognize it..now management recognised and want to rectify. If i reverse any entries it will effect previous Statutory reports, so without effecting the previous statements i have resolve it.
    Regds,

  • Accumulated depreciation in FA not tally with GL account

    Hi Expert,
    We have a issue for the Accumulated depreciation in FA not tally with GL account. The amount for the accumulated depreciation in the GL initially uploaded (amount not correct difference by 1cents) is not tally with fixed asset module. We unable to adjust the amount due to the accumulated depreciation GL account is set to "Recon. account for acct type- A Asset". Standard SAP is not allowed us to change the error message to warning message.
    Any idea how to settle this issue?

    Hi Janet,
    Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and  TType 100. Don't fill in asset number.
    Give only for this case authorization for ABF1 when the values are ok take away this authorization

  • Currency conversion - Line item total does not tally with account balance

    hi guys!
    we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
    1. while trying to run program RFSEPA02 the following error is appearing-
       -Line item total does not tally with account balance
    2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
    3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

    put a break-point @
    if t_balance_items_hw[] <> t_balance_account_hw[] or
         t_balance_items_tw[] <> t_balance_account_tw[].
        perform dequeue_account.
        message e099.
    *   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
      endif.
    endform.                               " CHECK_ACCOUNT_BALANCE_2
    and debug y it is getting the error.
    Short text
    Switch On Open Item Management by Changing Master Record
    Description
    This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
    Requirements
    No items can already be archived from this account.
    Caution: Company policy must be in place to ensure that this does not happen.
    Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
    Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
    The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
    Output
    When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
    Regards
    Prabhu
    Message was edited by: Prabhu Peram

  • How to fix the issue Total CN amount show in FSCM not tally with total CN amount in GSAP?

    Hi ,
    How to fix the issue that is Tolat CN amount show in FSCM not tallying with Total CN amount in GSAP?
    Can somepone reply for this asap ?

    Hi Janet,
    Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and  TType 100. Don't fill in asset number.
    Give only for this case authorization for ABF1 when the values are ok take away this authorization

  • RG1 Register : opening & closing balance does not match with actual Stock

    Hi
    I am working on SAP AFS 6.0.
    The RG1 register for a particular month displays data of only those materials which have been transacted in that month. I checked the tables J_1IRG1 and J_2IRG1BAL found that system retrives all records of the given period from the table J_1IRG1 and picks opening balance of these records from the table J_2IRG1BAL. The records of those materials which have closing balance in J_2IRG1BAL but was not transacted in the given period are not considered in RG1 register.
    I want RG1 register to show opening balance of all materials which have closing balance in J_2IRG1BAL but have not been transacted in the subsequent periods.
    Regards
    Niraj

    HI
    Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
    EXGRP: Excise group of the material
    DATUM: Date from which you want RG1 report i.e. 01.01.2004
    MATNR: Material
    FORM:  P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
    WERKS: Leave it blank
    Maintain all relevant opening balance fields. These fields start with OP
    Note 951955 - CIN: General clarifications for RG1 goods*
    check the above note
    regards
    Prashanth

  • GL Balance Report output not Matching with Material Stock

    Hi,
    Can we Match Reports MB5B (Stock on Posting Date)  and S_ALR_87012301 (G/L Account Balance)???
    Till March these reports are matching but from April 11, data not matching..
    In tcode MB5B, we are looking Valuated Stock of Materials and in tcode s_alr_87012301 showing balances, which were matching earlier..
    Plz guide...

    Dear:
              Execute the stock GL in FS04 to track the history of changes made to it. It is quite possible that post automatically tick was changed and some direct posting were made against this GL which ultimately caused discrepancies. If track is showing post automatic tick changed then it means some direct posting were made to it, Note the period in which it was changed and analyze the posting against this GL in that time span.
    Regards

  • FAGLB03 peroid balance not tallying with line items within

    Hi,
    When i go to FAGLB03 and tally  the balance of a recon account for a particular month with the line items in it, it does not tally
    This is happening for one period within the fiscal year, others period balance tally with the line items
    What can be the solution for this?
    Regards,
    Parin

    Hi Parin,
    You did not confirm still whether the account in FAGLF03 is the same account that you  are trying to view.
    This issue will require careful analysis in the system as there could be more than one reasons.One of the likely possibilities is missing BSIS line items. As it is a technical reconciliation issue, please create a message for processing.
    FBL3N report that you executed also points towards that. I hope that  you ran the report for all items posted in that period.
    If you ran it only for open items, then there is also a possibility of a possible clearing issue.
    Anyway , the best route will be to open a message in FI inconsistencies component and let SAP investigate further.,
    Best Regards,
    Shrikant

  • MM not tally with FI

    when i print report MB5S to compare with FBL3N base on a clearing account, I found you both report not tally. This is become user may key in the vendor invoice directly to through FB60 without go thorugh the MM module. How to rectify this error so that both will be tally?

    MB5S --  is only for MM transactions...where you can tally the GR & IR details.
    Comparing with FBL3N with MB5S is possible only the documents posted thru MM .You can chekc the document type ; RE , RP , RL.
    Documents posted using the document type:KR, KG can't chekc against the MB5S......
    While executing the FBL3N exclude the Document types KR, KG, SA.
    VVR

  • RG1 Register not getting updated

    Hi,
    Need your help on following.
    We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
    Scenario has following steps
    Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
    Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
    Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
    Please guide how to overcome this situation so that RG1 shall be updated.
    Thanks & Regards,
    Khushal Agrawal

    Moving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);

  • GL balance in FS10N not tally with KE5Z due to trx posted to FI but not CO

    Hi,
    Need help to solve this problem.
    Some of our FI postings were not reflected in the Profit Center accounting therefore when we compare GL balances in FS10N against KE5Z, the figure does not tally.
    Suspected when the transaction was posted, the cost element for the GL was not created yet.
    ie GL account 123456 created in 01.10.2009, transaction posted in 06.10.2009, but the cost element for 123456 was only created on 12.10.2009. Therefore the transaction posted on 06.10.2009 only updates FI but not on the CO side. Not sure whether this is the actual reason or could be due to other reasons.
    Is there any way to reverse/repost such that figures from the 2 tcodes tally? Thank you in advance.

    Hi Azmin,
    thanks for your reply, but I have actually tried using 1KE8 but I got an error log "Account xxx requires an assignment to a CO object". Therefore I wonder if there is any other tcode that I can use or should I perform certain step first before I can use 1KE8.

  • Inventory Value Not Tallying with R/3 MB5B Report

    Hi,
    We are tallying data of BW Query Inventory Valuated Stock Value (0VALSTCKVAL) with R/3 Valuated Stock Value using MB5B.
    i)      Data is tallying for all plants except one plant, this is having project stock.
    ii)     For this we have analysed data for one material , we found some valuated stock (With Negative Sign) on 19.04.2006 to   09.03.2008.But this is not showing R/3 anywhere.
    iii)     In the Cube also there is no data on 19.04.2006 to 09.03.2008 for this plant & material
    Please guide us  from where it is appearing in the BW Query.
    Thanks,
    Kiran Manyam

    Hi
    See the steps
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
    Thanks
    Reddy

Maybe you are looking for