RG1 register not updating

Dear all,
I searched in forum ...for my Question ...but all not releated to my Question...
Let me tell you wot i did .....
1) i created Material master and maintained Chapter ID-and Posted stock through MB1C with Moment type 561.
2) Through T-code SE16 i updated Material master in this Table(J_2IRG1BAL).But data is not updating in htis table.
How can i update the Data in this Table ..is thr any other way to update the data..is this mandatory.
Thanksin Advancve
Regards
raj

Sales order
Delivery
PGI
Update the RG1Which classification) - RMA for mov type 561- & IDH for delivery (for domestic sales)
Billing Excise Invoice - J1IIN
Extract the RG1..Which classification - No classification is req'd while extracting RG1
post the RG1Which classification - ?what do you mean by POST here, There is nothing called POST.
and one more thing is i maintaind in table J_2IRG1BAL....but it is asking Varient i saved the Data with some varient name....and if i go back and check the data ..i mean i clicked oon number of entries...thr is noe record in that Table
FLOW is:
-     VA01
-     VL01N
-     VF01
-     J1IIN u2013 Capture EI
-     J1IP u2013 Print EI
-     J1I5- update RG1 u2013 (Classification u2013 RMA/IDH)
-     J2I5 u2013 Extract RG1
-     J2I6 u2013 Print RG1
-     J2IUN - Utilization
Maintain entries from SE11 - Table:J_2IRG1BAL- Goto Utilization -Table Contents - Maintain Entries & Save
it will not ask for any Variant.

Similar Messages

  • RG1 Registers not updating fully

    Dear CIN gurus,
    RG1 register not updating full contents like opening qty  quantity  and closing balance qty  details. we are using ECC 6.0
    Opening balance Quantity , Closing balance quantity are not coming automatcally.its appearing zero while downloading throu Excel. Other receipts and Issues quantity and values are getting updated. Any config check is there.
    Pls help me to resolve the issue
    regards
    Jaffar

    Hi Mr.Muralidhar,
       Even i am facing the same Issue as mentioned above by Mr.Jaffer.
       In RG1 register,opening balances of materials are being updated after
       maintaining J_2IRG1BAL table entry.
       However, closing balance for the same material is not getting updated.
       For example, opening balance of a material is 1250 Units and no Issues
       have been done on the said day. But closing balance in register for the
       same material is getting displayed as Zero (0).
       Can you please help me to resolve the Issue.
        I also request all other CIN Experts to help me in resolving the Issue.
    Thanks & regards,
    RP

  • RG1 is not Updating Automatically

    Dear All Salute !!
    RG1 is not updating automatically in the system due to data migration on cutoff date since February; they are maintaining parallel in the legacy system (in Excel or any other), though here is updated project from 5.0 to 6.0.
    I am unable to understand, how the system is going on in the lacking of this.
    From Accounts Department side: Still Cenvat duty posting & statement (57AE) are done manually by dispatch/stores department. As per ECC6, system generated report should be available to the end users to avoid duplicate work & mistake.
    As per observation from SD side _no Opening Balance is uploaded while data migration_.
    I have got information through SDN about table J_2IRG1BAL but I am unaware of using this.
    Please provide me complete solution for this to do the needful instead of OSS Notes. 
    Rgds
    Srivastav
    +91-9973504950

    Adding to Komals reply,
    Please go through the sap note 951955 and check below comments:
    Please check whether you have maintained opening balances for
    all RG1 material in table J_2IRG1BAL. If not, please maintain opening
    balances for all RG1 material in J_2IRG1BAL for the date from which
    you want to run the RG1 report.
    Thanks
    Murtuza

  • RG1 Register not getting updated

    Hi,
    Need your help on following.
    We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
    Scenario has following steps
    Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
    Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
    Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
    Please guide how to overcome this situation so that RG1 shall be updated.
    Thanks & Regards,
    Khushal Agrawal

    Moving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);

  • RG1 register not tallying with MB5B stock

    Hi
    I have updated in J1i5 & extracted the register in J2i5, in which few issue entries (201 mvt) are not reflecting in RG1 Register.
    When I try to re-run the issue entries in J1i5 under classification IDH, IWE, IWO - entries are not getting registered instead red light indicator is  shown with error "processing over of 0 records Message no. 8I300
    Pls help
    Regards
    P Karthikeyan

    Could anyone help on this

  • RG1 registry not updating

    Dears
    I have gone through existing forums and  I was very clear about the functionality of the same but
    there is one error which I am facing
    SCENARIO
    I have proceeded with the steps given in SD wiki and also I have gone through oss note 373001 which was quite helpful to certain limit because when I am using t-code J1I5 and entering parameters as mentioned in sd wiki page,system is givig me message,
    "list contains no data" while execution.
    Kindly let me know which parameters I have to enter or check!
    Regards
    KAPIL MORE

    Hi Kapil,
    Please follow the below steps and confirm:
    1) Update the Packed/Unpacked indicator for each material in the table.
    2) Include 561(initial upload movement type) in the CIN configuration.
    3) Update RG1 for initial update Material documents.
    Now the initial stock will be available in RG1, then you can try updating the regular transactions (601 etc.,).
    With Regards,
    Karthik
    Edited by: sapsd_123 on Jul 18, 2011 3:54 PM

  • RG1 Registers Not Updating

    Dear All,
    We have done the entry in J1IN, and also done the update in J1I5, Using classification RMA & also done the Extract J2I5. But Still it is not getting updated in the Registers.
    Kindly guide me . What are the classification to be done for Updating Register...Please Kind Me.
    Regards,
    R.Ramakrishnaraj,

    Dear Friend,
    Make sure that the movement types for the material documents (say 101,131,601,641 etc) are updated in the below mentioned node
    Spro > Logistics general > Tax on Goods Movements > India > Business transactions > Incoming excise invoices > Specify which movement types Involve excise invoices
    for RG1 update
    Regards
    Venkatesh
    assign points if useful

  • RG1 Value not updated

    Dear All,
    We are selling the material thru Sales BoM. For the same we have maintained Item Cat Grp ERLA & LUMF in material master.
    Druing RG1 updation the Qty is getting updated but not the value for the Sub Items. Can one guide how to updated the values for Sale BoM material.
    Thanks in advance.
    Regards,
    Mahendra

    Here you are using- ERLA which means pricing carried out at main item level-
    RG1 will update the qtty from GI doc & Value from Excise Invoice ( which will flow from Invoice) -
    So, in main item level pricing - value will not get updated in RG1-
    I guess Qtty also should not get updated, as GI document will trigger only for main item, but not for subitems-
    ( because PGI will happen for only Main Item)

  • Check Lot/ Register not update through F110

    Dear SAP Guru,
    My client has two bank HDFC and HSBC.
    I haven given ranking order in FBZP HDFC 1 and HSBC 2.
    When i am doing testing system is check lot and register updated in HDFC.
    When i run the progam through HSBC the system is making the payment to vendor but it is not upate the check lot and check register.
    Can i change the ranking order or any other way?
    Regards,
    Pankaj

    Hi,
    If you updated HSBC in the print program variant, then the ranking order becomes irrelevant.  Just check customising settings for house bank for HSBC, specifically the check lot.
    If you want to change the ranking order, there is a T code for that: S_ALR_87001487
    Cheers.

  • Electronic Bank Statement - Check register not updated with encashment date

    I need help in Electronic Bank Statement. After uploading the bank statement file, i got the document number posted, but when i looked in Check register for the checks it's still showing up as outstanding check and there is no encashment date updated with this check.
    We received file from bank in BAI format and use t.code ff_5 to upload the bank statement file. Algorithm 011 already assigned in Config. Please help me to solve this issue.

    Encashment field did not get updated....
    This happens to us in the following instance...
    Our checks numbers are as follows with zeroes in front... 0000000121558
    The BAI file from the bank has the number listed as 121558. We have a process to convert the BAI file to a .txt format and add seven zeroes in front of the number in the file before processing. We had a new user that forgot this step. Without the zeroes added to the file to match the check numbers, our encashment field did not get updated. We had to do it manually.

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • Manufactured Item is not hitting the RG1 register

    Hi,
    In india localization, Manufactured Items to hit RG1 register..
    But in our case it is not happening ( All localization setups are defined for the warehouse in Discrete inventory)
    Can anyone help me in this regard..
    Regards,
    Navanethan

    hi
    To my knowledge in the current release Production batch is supported only for OSP transaction and Only 'MOVE IMMEDIATE', 'ADJUST IMMEDIATE' and 'CREATE IMMEDIATE' transactions are supported for RG updates.
    As per excise laws it needs to have all the finished goods produced into RG1 therefore when we book production quantity for finished goods system should update RG1 also.
    In the current system when booking production quantity ,RG1 register not getting updated and system should call the same trigger which is being used for move immediate,adjust immediate etc.
    U need to raise an SR
    Thanks
    Raj

  • Error in updation on rg1 register

    Hi
    I created a excise invoice for factory sale. While updating the register
    J1I5 Update the RG 1 and Part I registers
    it is not simulating. Why is there any customization setting i have to do or what?
    kindly help in this matter
    regards
    chakri

    In the case if updation is for first time:
    RG1 Updation
    The sequence is like this:
    1. In SE16, enter Table name: J_2IRG1BAL, and click on Create. Enter the material Number and 'P' in Material form (Loose/Pack indicator) and click 'Save'. This step is to be done only for the first time.
    2. Do your Initial Stock entry in MB1C, movement type 561
    2. Go to J1I5, select Posting Date, Document Year and 'ROP in Classification (Receipt from outside under any other provision). Click on Create icon (Register entry)
    4. Go to J2I5 and extract the RG1 Register. You must get a green checkmark.
    5. After doing the PFI, go to J1I5, select Posting Date, Document Year and Classification 'IDH' (For domestic sales) or 'IDE' if the first removal is for Export Sale. Based on the accounting document generated during PGI (MB03) the RG1 Register gets updated with the removal for Outbound Delivery.
    6. Reextract the RG1 register in J2I5. You must get a green checkmark.For the RG1 Register printout, go to J2I6, select the option, 'Script Form' and hit 'Execute.
    All this was in OSS Note: 373001.
    Regards,
    Rajesh Banka

  • Assesable value is not updating in RG1

    Hi frnds,
    Please solve this prob. which I am facing.
    i am selling finshed goods.
    RG1 register is updating very well except the assesable value on which the excise is levied.
    Please guide me ,Is there any customizing setting are there ?
    I am using Jass condition typein my pricing procedure for assesable value.
    TaxINN is the tax procedure I am using.
    Please help me
    Sunil

    Why u maintained J1ID for TAXINN !
    J1ID only for TAXINJ
    In taxinn system caliclates excise duty based on , What is the base value in the sales pricing procedure for JASS.so it never consider assessbul value in J1ID..

  • Assessable value in RG1 register for IWE classification

    Dear Sirs,
    We are not getting Assessable value for export issues made from RG1 register under IWE category in j1i5. Is there any solution to bring in assessable values for IWE in RG1 register?
    regards,
    rahul

    Dear Pankaj,
    Refer SAP Note: 951955. FAQ for RG1 question number 10.
    Content of the same provided below:
    ===
    10. Assessable value is not appearing the RG1 register in transaction J1I5.
    Answer: If the scenario has another pricing condition other than PR00 (for example, another price condition exists containing the balance of the PR00 and discount condition) then PR00 has to be maintained as a statistical condition so that the base value will be PR00 minus discount condition, i.e., the second price condition.
    ===
    Value column in RG1 register is updated based on the Condition Type in Pricing Procedure for which setting is as below:
    Condition Class: B - Prices
    Condition Category: H - Basic Price
    Excise Values are updated in RG1 on creation of Excise Invoice
    Regards
    Rajat

Maybe you are looking for