RG1 Register updation , one material document is showing in red traffic

Hi Friends,
When updating the RG1 Register one materail document with 601 movement type and classification IDH is showing in red trafic light. How to correct this error?
Actually this material having stock in the plant and that material document posted properly also.
Please help me frineds?
Regards
Satya

Hi Shekar,
Actually I have selected first Classification as RMA , i hope this process may update the RG23A.I got all the data properly at simulation and i have taken all those values into register.
Next step , I selected the classification as IDH and rying to update the RG1 register. Here for some line items (Material documents ) are showing in Red Traffic light at the time os Simulation.
All ther master data like chapter ID Maintaince and Cenvat determination is maintained properly.
Regards
Satya

Similar Messages

Excisie duty updation problem during RG1 register update

Dear All,
During updation od RG1 register, excise duty has not been updated in Rg1 register. Transactional entry updated but Exice duty/ ecs/ CEss is showing zero value.
It happened with two materials only. all excise master data has been maintained for that material.
What will be reason ?
Your valuable reply is appreciated. Thanks
Regards
Mangesh

Hi Mangesh,
I hope you are using the std transaction J1I5 for RG1 Register update.
Normally we update the RG1 Register using the material documents.
So check whether for the material documents which you updated whether an excise invoice has been created or not ? because std - J1I5 transaction doesnt check the same.
If you have updated the RG1 register after creating the excise invoice for the above materials doc's then excise value will be updated in the same.
IF its not happening then check if any SAP notes are available.
Hope its clear.
Regards,

RG1 Register Updation Problem-

Hello,
we are having two plants, both are manufaturing plants. having same excise group and Excise registration number. Actualyy both the plants are situated at same place. M001 is linked to M001 company code and M002 plant linked to M002 Company code.
M001 plant Receive the Finished good from Shop floor via Production oder and Rg1 register updated through J1I5 t code.
Now Business wants to do Stock transfer for moving of FG material to M002 plants for sale from M001 plant. Every material will sales from M002 plant. Business is making STO from M001 to M002 Without excise .
How to Update RG1 Register in M002 plant. Received entries updated in M001 company code RG1 Register and but sale from M002 plant how to update Rg1 register.
Regards
Mahesh

Hello
301 movement type is assigned to RG1 register and
Material and Chapter ID and material Type "RG1" mainatined in J1ID....
We have transffered the material from M001 company code to 9001 through MB1B with movement type 301.
system is not showing any documents here for updation of RG1 register through J1I5.. here clssification selected is "RMA" receipt from Manufature"
Mahesh

Multiple Posting change notice created for one material document

Hi All,
The scenario is that the user needs to transfer material from unrestricted to quality stock type. while doing so the storage type is different than the actual storage type for the material. Meaning if the material is normally stored in high rack storage type, when it is found that the material is damaged or expired it need to be moved to the quality storage type. For this the user will first create material document in IM with movement type 322 transferring material from unrestricted stock to qualtiy stock. A PCN will be created in back ground which will in turn be converted manually by the user to a TO. while doing so the user will pick the quant manually from the required storage type and select the destination storage type as the quality or quanranntine area.
The issue here is that system creates one PCN for each material document line item. The requirement is that the system should create only one PCN with multiple lines for one Material document.
The setting in the movememnt type clearly says that it will behave as it is behaving.
Is there any other way or setting by which we can create one PCN with multiple line items for a material document.
Would look forward to your replies.
Regards,
Jeetendra

Thanks and Sorry for the delayed reply. We have now convinced the users that the system behaviour is standard and we cannot change the same.
To your question about the need to have one PCN with multiple lines please note that the setup is such that when material document is created for transferring material from unrestricted to quality and vice versa this document is created with multiple materials in one go. Now when the PCN is to be converted to TO then the user ends up in creating number of TO's equal to the number of lines in the Material Document. We wanted to avoid this and hence this was posted in SDN.

Pop up to enter text in QA11 and then update in material document item

Hi everyone,
I have a requirementt which states that: In QA11 t-code under inspection lot stock tab if any qualtity is entered in Blocked stock then user should be prompted for a pop to enter text and that text should finally update in material document item text.If anyone has encountered it earlier please let me know .
Regards Pallav

Hi Pallav,
Please use exit EXIT_SAPMQEVA_005 "Transfer of Inspection Lot Data to User Screen" for this purpose and if necessary create a module pool screen for user interface.
Regards,
Gaurav

RG1 Register Updation Process URGENT

Dear All,
During the updation process for Excise Invoices, how does the system differentiate between an export shipment and Domestic shipment.
In the J1I5 transaction code there is a field called classification where we have
IDH : Removal from factory on payment of duty for home use
IDE: Removal from factory without payment of duty for export under bond
What i want to know is how the system distinguishes between documents that belong to IDH transaction and documents that belong to IDE transaction. are there any settings required for that.
Because when i select the IDH transaction the system is also selecting export documents. what can be the reason for the same.
Deepak

Hi
Please Check this out.. this may help you..
Update of Registers RG 1 and RG 23 (Part I)
Use
You use this report to update the information in the following registers:
RG 1
RG 23A, Part I
RG 23C, Part I
This report only creates register entries for goods movements that have not already been entered. It does not create duplicate entries.
You cannot print or display these registers using this report. It is solely for the purpose of updating the registers. Instead, to download the registers, use the Download Register Data report
Prerequisites
You have specified in the material master data which materials are to be entered in register RG 1.
For each of these materials, you have maintained the material form in table J_2IRG1BAL as below. Do not make any entries in fields that are not listed below:
Field
Field entries
EXGRP
Materials excise group
DATUM
Date from which RG1 report is required, normally the date of going live
MATNR
Material
FORM
Enter P (Packed) or L (Loose). Do not leave this field blank.
WERKS
Leave this field blank.
OP FN UOM
Leave these fields blank.
All quantities in this table are updated in the base unit of measure of the material.
OP BN UOM
CB FN UOM
USNAM
User ID of the person filling out the table.
CPUDT
Date of entry
CPUTM
Time of entry
Features
To access the report, from the SAP Easy Access screen, choose Indirect Taxes ® Registers ® Excise Tax ® Update RG 23A/C Issues and RG 1.
Selection
On the selection screen, you specify:
Which documents you want to cover:
Enter general organizational details in the Company details group box.
Enter details about the documents that you want to include in the register, in the Document header and Document details group boxes.
Which register you want to update, in the Registers group box
Whether you want to run the program in batch mode
You can also check what date the data was last extracted.
Output
The system displays a list of material documents that have not yet been entered in the register.
Select the documents that you want to add to the register.
To check if there is enough stock in the specific excise group for the register for issues or receipts, select the line items and choose Simulate.
We recommend that you use this option before proceeding; it will show the line items that can be updated in the register.
Issues and receipts are handled separately based on the following register and classification code combinations:
Register Type
Goods issues
Goods receipts
RG 23A
IIM
ROP
IPD
IWD
RG 23C
IIM
ROP
IPD
IWD
RG 1
IDH
RMA
IDE
ROP
IWE
IWT
IWO
Lines that can be updated in the register will be shown with a green traffic light, while those which are not eligible (for example, if there is not enough stock on hand) will be marked with a red traffic light.
You can reselect the required line items and repeat the Simulate process.
Select the line items you want and choose Register entry.
The system updates the Part I or RG 1 tables with the material documents.
For RG 1 issues to sales, wherever there is an excise invoice it is picked up and used for RG 1 updating.
The same option can be used for creating entries in RG 23A or RG 23C Part I registers. While creating entries in the register, system will pick up only those material documents for which Part I posting has not been done yet.
Hope it helps you
Mastan

J1I5 -RG1 register updation in production UoM whil havin differ. Base UoM?

Dear gurus,
I have come across a situation where chapter ID assigned to material has UoM as MTS (metric ton)..while base unit of measurement in Material master is MTR(meter)... while updating RG1 register using J1I5 system is picking quantity in MTR though production unit is declared as MTS and conversion between MTR and MTS is fed already. It is desirable to have entry in UoM given in chapter ID not in base UoM. Kindly tell me a way using which UoM in J1I5 can be selected or changed.
well i am aware of that it is always preferable to have it Base unit of measure but there are other constraints of sales and PP etc which have compelled us to go with present situation ... please tell me if there is a way to make it work.... since raw mat. is bought in MTS and different goods have different conversion in MTR ... to do proper costing MTS is needed and for sales point of view MTR is important
regards
Avinash Goswami

not answered closed

Delta update - delete material documents

Hi,
We have some problem during delta updates for 0IC_C03 (material movement).
In the source system, we have deleted the material master, but its material documents and accounting documents still exist.
The delta updates shows error saying those deleted material doesn't exist while loading the material documents.
please help.
we have problem deleting the materials document and accounting documents in the source system.
In BI side, how to enable the delta updates?
regards,
zl

Hi,
After the error, we have deleted the materials and material documents from the source system.
May I know why the delta update still select the deleted materials and material documents from the source system in the PSA?
May I know how to modify the extraction logic?
Thank you.
regards,
zl

RG1 Register updation issue

Dear All,
We are having one series group per plant for all sales scenario ,
This we did to maintain plant wise single number range series for all sales scenarios,
now the issue is how we can separate them while updation of RG1,
e.g. Domestic Sales, Export Sales, Rebate Export, Deemed Export.
Even though excise invoice type is also maintain properly in J1IIN,
for example: while updating of RG1 in J1I5 with classification IDH all entries is coming for updation including domestic sales, exort sales, deemed export etc,
Sai

Hi,
See First of all RG1 extraction is for material but not for sales area or plant
Any way since you are telling through series group or excise group
mention that excise group plant and classification and extract RG1
Since it is respective to material we can extract it for all materials only.
Regards
Kiran

Export RG1 Register Updation

Dear Expert,
i want to update RG1 Register for Export process.
when i want to update? whether after ARE1 Creation or Before ARE1 Creation.
Thanks for advance

HI
You can Extract,Update and print the PG1 register after creating the Excise Invoice even domestic or Exports.
There is no hard and fast rule with regards to updation of registers with ARE1 or ARE3.
Use the Classification type IWE as classification type
regards
Prashanth

Material Document Not Shows the System

Dear All
In my client is Done the Migo W r t Po but that Materail document not shows the PO History and Mb51, but i check the PO in delivery is Complted in delidery status. plz i need your help.
Thanks And Regards
Sonu

Sorry ya, its not Coming, material document does not Exist. error is comeign.

RG1 Register Updated Error

Dear All,
I have select Movement Type is 601 and Classification is IWO and select the RG1 option.
Next i go select the view list of items and simulate the list. All the items are marked in red color. I do not know.
Please kindly to give the clear process for RG1 .
Thanks
Saro

Just wanted to know, 1)whether you are using this functionality for the first time or
                                    2)it was updating the RG1 register earlier but it is not updating now.
If your answer is 1), .......
                                         A) You need to maintain the necessary settings related to movement types relevant for updating RG1 register
                                         B) Check that whether RG1 balance is uploaded RG1 opening balance table
                                         C) You need to update the RG1 inward entries before updating the outward entries
                                         D) Check whether classification IWO is relevant for RG1 updation or not
If your answer is 2), .......
                                        A) Check the RG1 balance
                                        B) Check all movement types associated with inward entries relevant for RG1 are maintained in customizing
                                       C) Check classification IWO is relevant for RG1
Let me know if it resolves your issue

RG1 register update report

Hi All,
We have a new requirement to add the new column for billing document number in RG1update register report ( J1i5). Any one can please tell me the table name or suggest me where can i get the datas.
Than

hii
U can have customised report for this reuirement .
Jus u want to add billling in that report , check with ABAPer . But make sure that this report for internal purpose.
Thanks

RG1 Register Updation

Dear Expert,
In table "J_2IRG1BAL", which integer field i want to give initial stock balance ( through MB1C transaction i upload with 561 movement type).
because lot of integer fields is there in that table.
i confusing. can anyone help me?
Thanks for Advance

hi
Maintain all relevant opening balance fields. These fields start with OP
Please check the note Note 951955 - CIN: General clarifications for RG1 goods
IT WILL CLEAR all your doubts
regards
prASHANTH
Dont post the Duplicate threds. Please make a search in the forum

Incorrect Opening stock & closing stock updation in RG1 Register

Hi ,
It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
After extracting for the month of sept. , when no opening and closing stock
reflecting in it, than we realize it .Afterwards we maintain
the closing balance for 31.08.2010 in the table and try to
re-extract it,but there is no change in the sept.figure.After extracing for
October month,we get the values in the column ofopening stock and
closing stock in RG1 register. But for some material it is showing
negative stock and for some as Zero, though physically it is present.
What i found in Rgsum table that the stock quantity are not correct,
it seems that september stocks are not updated in the table also in
J_2irg1bal table ,only october stock are reflecting.
looking forward for your valuable inputs.

Hi,
All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
Excise details table all the entry are there for september month.The only problem is on Opening and Closing
balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
How to correct this.
Regards
sujeet

RG1 Register updation , one material document is showing in red traffic

Similar Messages

Maybe you are looking for