RG1 Registers not updating fully
Dear CIN gurus,
RG1 register not updating full contents like opening qty quantity and closing balance qty details. we are using ECC 6.0
Opening balance Quantity , Closing balance quantity are not coming automatcally.its appearing zero while downloading throu Excel. Other receipts and Issues quantity and values are getting updated. Any config check is there.
Pls help me to resolve the issue
regards
Jaffar
Hi Mr.Muralidhar,
Even i am facing the same Issue as mentioned above by Mr.Jaffer.
In RG1 register,opening balances of materials are being updated after
maintaining J_2IRG1BAL table entry.
However, closing balance for the same material is not getting updated.
For example, opening balance of a material is 1250 Units and no Issues
have been done on the said day. But closing balance in register for the
same material is getting displayed as Zero (0).
Can you please help me to resolve the Issue.
I also request all other CIN Experts to help me in resolving the Issue.
Thanks & regards,
RP
Similar Messages
-
Dear All,
We have done the entry in J1IN, and also done the update in J1I5, Using classification RMA & also done the Extract J2I5. But Still it is not getting updated in the Registers.
Kindly guide me . What are the classification to be done for Updating Register...Please Kind Me.
Regards,
R.Ramakrishnaraj,Dear Friend,
Make sure that the movement types for the material documents (say 101,131,601,641 etc) are updated in the below mentioned node
Spro > Logistics general > Tax on Goods Movements > India > Business transactions > Incoming excise invoices > Specify which movement types Involve excise invoices
for RG1 update
Regards
Venkatesh
assign points if useful -
RG1 is not Updating Automatically
Dear All Salute !!
RG1 is not updating automatically in the system due to data migration on cutoff date since February; they are maintaining parallel in the legacy system (in Excel or any other), though here is updated project from 5.0 to 6.0.
I am unable to understand, how the system is going on in the lacking of this.
From Accounts Department side: Still Cenvat duty posting & statement (57AE) are done manually by dispatch/stores department. As per ECC6, system generated report should be available to the end users to avoid duplicate work & mistake.
As per observation from SD side _no Opening Balance is uploaded while data migration_.
I have got information through SDN about table J_2IRG1BAL but I am unaware of using this.
Please provide me complete solution for this to do the needful instead of OSS Notes.
Rgds
Srivastav
+91-9973504950Adding to Komals reply,
Please go through the sap note 951955 and check below comments:
Please check whether you have maintained opening balances for
all RG1 material in table J_2IRG1BAL. If not, please maintain opening
balances for all RG1 material in J_2IRG1BAL for the date from which
you want to run the RG1 report.
Thanks
Murtuza -
Dears
I have gone through existing forums and I was very clear about the functionality of the same but
there is one error which I am facing
SCENARIO
I have proceeded with the steps given in SD wiki and also I have gone through oss note 373001 which was quite helpful to certain limit because when I am using t-code J1I5 and entering parameters as mentioned in sd wiki page,system is givig me message,
"list contains no data" while execution.
Kindly let me know which parameters I have to enter or check!
Regards
KAPIL MOREHi Kapil,
Please follow the below steps and confirm:
1) Update the Packed/Unpacked indicator for each material in the table.
2) Include 561(initial upload movement type) in the CIN configuration.
3) Update RG1 for initial update Material documents.
Now the initial stock will be available in RG1, then you can try updating the regular transactions (601 etc.,).
With Regards,
Karthik
Edited by: sapsd_123 on Jul 18, 2011 3:54 PM -
Dear all,
I searched in forum ...for my Question ...but all not releated to my Question...
Let me tell you wot i did .....
1) i created Material master and maintained Chapter ID-and Posted stock through MB1C with Moment type 561.
2) Through T-code SE16 i updated Material master in this Table(J_2IRG1BAL).But data is not updating in htis table.
How can i update the Data in this Table ..is thr any other way to update the data..is this mandatory.
Thanksin Advancve
Regards
rajSales order
Delivery
PGI
Update the RG1Which classification) - RMA for mov type 561- & IDH for delivery (for domestic sales)
Billing Excise Invoice - J1IIN
Extract the RG1..Which classification - No classification is req'd while extracting RG1
post the RG1Which classification - ?what do you mean by POST here, There is nothing called POST.
and one more thing is i maintaind in table J_2IRG1BAL....but it is asking Varient i saved the Data with some varient name....and if i go back and check the data ..i mean i clicked oon number of entries...thr is noe record in that Table
FLOW is:
- VA01
- VL01N
- VF01
- J1IIN u2013 Capture EI
- J1IP u2013 Print EI
- J1I5- update RG1 u2013 (Classification u2013 RMA/IDH)
- J2I5 u2013 Extract RG1
- J2I6 u2013 Print RG1
- J2IUN - Utilization
Maintain entries from SE11 - Table:J_2IRG1BAL- Goto Utilization -Table Contents - Maintain Entries & Save
it will not ask for any Variant. -
Dear All,
We are selling the material thru Sales BoM. For the same we have maintained Item Cat Grp ERLA & LUMF in material master.
Druing RG1 updation the Qty is getting updated but not the value for the Sub Items. Can one guide how to updated the values for Sale BoM material.
Thanks in advance.
Regards,
MahendraHere you are using- ERLA which means pricing carried out at main item level-
RG1 will update the qtty from GI doc & Value from Excise Invoice ( which will flow from Invoice) -
So, in main item level pricing - value will not get updated in RG1-
I guess Qtty also should not get updated, as GI document will trigger only for main item, but not for subitems-
( because PGI will happen for only Main Item) -
[Solved] Pacman -Syu not updating fully?
I've run Syy then Syu a couple times, yet pacman doesn't alert me to a newer Linux in core.
$ uname -r
Output: ... 3.6.5 ...
$ pacman -S linux
Output: ... linux-3.6.9-1 ...
So should I install this newer Linux regardless and then re-run Syu? Or is pacman disregarding 3.6.9 for a reason?
Thanks,
Last edited by theoddsarebad (2012-12-10 20:18:37)theoddsarebad wrote:
I haven't done the update yet, I just see that it is available, and my system has already been rebooted a few times after a previous system update (last week).
So the scenario is I have a freshly rebooted box reporting kernal 3.6.5, and pacman -Syy then pacman -Syu tells me everything is up to date, and pacman -S linux tells me that 3.6.9 is available.
That scenario seems odd so I just wanted to ask if it means maybe that I shouldn't update yet, or should I just update the kernel regardless by doing pacman -S linux?
You have "linux" on IgnorePkg? check your /etc/pacman.conf
If you are using arch on a vps (not based on kvm, but on openvz or similar) chances are, you are stuck with your current kernel.
If thats the case, don't force the kernel update.
Last edited by chris_l (2012-12-10 19:44:59) -
Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank youMy programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
PartII Registers are not updated for J1IS
Hi All,
Please help me to know, why there is no update for part II registers for Invoice for MRDY type , which was done through J1IS.Please help to configure these things
Example:
Returns PO Created ME21N
Goods posted :MIGO with Movt 161
Part I updated with J1I5
Invoice created with J1IS
Registers updated with J2I5 and then J2I6.
While doing J2I5 for part II, it is not updating the Part II register(I mean ,this transaction is not showing in J2I6)
If I do the other adjustments in transaction J1IH, we can able to update PartII registers (J2I5 then J2I6).
Please help in this regards.
Thanks and Regards
Jonnakuti RajuHi,
RG23A Part II register will have entries of Credit or Debit of Excise Duties, Excise Invoice created is not a part of RG23 Register. Through J1IS only Excise Invoice is created, effect of debiting the excise duties to this respective excise invouce will happen only when you will do J2IUN for debitting the excise duty. Moreover you can see the list in J2IUN - Pending Invoice or in J1I7 , use ETT type OTHR.
Regards,
Vikas -
RG1 Register not getting updated
Hi,
Need your help on following.
We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
Scenario has following steps
Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
Please guide how to overcome this situation so that RG1 shall be updated.
Thanks & Regards,
Khushal AgrawalMoving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);
-
Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. App freezes, windows says to upgrade it.
I went to Edit>Preferences>Advanced, G: is showing as the destination drive.
-
Cin registers are not updating
cin registers RG23A RG23C PLA are not updating eventhough i have done al required l configurationl settings
Edited by: akhilreddym on Jul 27, 2011 9:15 AMHi,
it wont update automatically, you have to update them manually.
T-codes to view excise registers are
J1I2 - Prepare a sales tax register
J1I5 - Update the RG 1 and Part I registers
J2I5 - Extract data for excise registers
J2I6 - Print excise registers
J1IR - Download register data
thanks & regards,
siva reddy.s -
I have pending app updates that will not update, any suggestions great fully received
I have pending app updates that will not update, any suggestions great fully received
Try This...
Close All Open Apps... Sign Out of the Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I have iphone 4g and have updated to ios6 an updated itunes 2, but while sync itunes freezes and iphone is not sybc fully, finally i have to disconnect my iphone for itunes to shunt down. Can some one please tell why this is happening?
I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.
Maybe you are looking for
-
I need to run a pc scan for something but it keeps telling me that, the page can't open.
-
Hi everybody, I'm searching for 'OK' and 'Cancel' icons, in a style that looks like the icons in the graphic repository.
-
I am currently using VL10C to create a single delivery for mutliple sales orders and it is working well. The users want to be able to view the delivery prior to the number being assigned to ensure that it has created as expected. There are two option
-
Hi Friends, I have the requirement to design a consolidation application. I am confusing with currency and group dimension in the latest version BPC 7.5 The structure of organization and its subsidiaries 1) ABC COMP (USD) having 2 subsidaries
-
Publication not working.
Hi, We are trying to publish a Crystal Report (2008) using BO XI R3.1 infoview. We have gone through all the server settings and everything seems to be right. However, the publication only works for Administrators and the test user with the necessary