RG1 Registers Not Updating

Dear All,
We have done the entry in J1IN, and also done the update in J1I5, Using classification RMA & also done the Extract J2I5. But Still it is not getting updated in the Registers.
Kindly guide me . What are the classification to be done for Updating Register...Please Kind Me.
Regards,
R.Ramakrishnaraj,

Dear Friend,
Make sure that the movement types for the material documents (say 101,131,601,641 etc) are updated in the below mentioned node
Spro > Logistics general > Tax on Goods Movements > India > Business transactions > Incoming excise invoices > Specify which movement types Involve excise invoices
for RG1 update
Regards
Venkatesh
assign points if useful

Similar Messages

  • RG1 Registers not updating fully

    Dear CIN gurus,
    RG1 register not updating full contents like opening qty  quantity  and closing balance qty  details. we are using ECC 6.0
    Opening balance Quantity , Closing balance quantity are not coming automatcally.its appearing zero while downloading throu Excel. Other receipts and Issues quantity and values are getting updated. Any config check is there.
    Pls help me to resolve the issue
    regards
    Jaffar

    Hi Mr.Muralidhar,
       Even i am facing the same Issue as mentioned above by Mr.Jaffer.
       In RG1 register,opening balances of materials are being updated after
       maintaining J_2IRG1BAL table entry.
       However, closing balance for the same material is not getting updated.
       For example, opening balance of a material is 1250 Units and no Issues
       have been done on the said day. But closing balance in register for the
       same material is getting displayed as Zero (0).
       Can you please help me to resolve the Issue.
        I also request all other CIN Experts to help me in resolving the Issue.
    Thanks & regards,
    RP

  • RG1 is not Updating Automatically

    Dear All Salute !!
    RG1 is not updating automatically in the system due to data migration on cutoff date since February; they are maintaining parallel in the legacy system (in Excel or any other), though here is updated project from 5.0 to 6.0.
    I am unable to understand, how the system is going on in the lacking of this.
    From Accounts Department side: Still Cenvat duty posting & statement (57AE) are done manually by dispatch/stores department. As per ECC6, system generated report should be available to the end users to avoid duplicate work & mistake.
    As per observation from SD side _no Opening Balance is uploaded while data migration_.
    I have got information through SDN about table J_2IRG1BAL but I am unaware of using this.
    Please provide me complete solution for this to do the needful instead of OSS Notes. 
    Rgds
    Srivastav
    +91-9973504950

    Adding to Komals reply,
    Please go through the sap note 951955 and check below comments:
    Please check whether you have maintained opening balances for
    all RG1 material in table J_2IRG1BAL. If not, please maintain opening
    balances for all RG1 material in J_2IRG1BAL for the date from which
    you want to run the RG1 report.
    Thanks
    Murtuza

  • RG1 registry not updating

    Dears
    I have gone through existing forums and  I was very clear about the functionality of the same but
    there is one error which I am facing
    SCENARIO
    I have proceeded with the steps given in SD wiki and also I have gone through oss note 373001 which was quite helpful to certain limit because when I am using t-code J1I5 and entering parameters as mentioned in sd wiki page,system is givig me message,
    "list contains no data" while execution.
    Kindly let me know which parameters I have to enter or check!
    Regards
    KAPIL MORE

    Hi Kapil,
    Please follow the below steps and confirm:
    1) Update the Packed/Unpacked indicator for each material in the table.
    2) Include 561(initial upload movement type) in the CIN configuration.
    3) Update RG1 for initial update Material documents.
    Now the initial stock will be available in RG1, then you can try updating the regular transactions (601 etc.,).
    With Regards,
    Karthik
    Edited by: sapsd_123 on Jul 18, 2011 3:54 PM

  • RG1 register not updating

    Dear all,
    I searched in forum ...for my Question ...but all not releated to my Question...
    Let me tell you wot i did .....
    1) i created Material master and maintained Chapter ID-and Posted stock through MB1C with Moment type 561.
    2) Through T-code SE16 i updated Material master in this Table(J_2IRG1BAL).But data is not updating in htis table.
    How can i update the Data in this Table ..is thr any other way to update the data..is this mandatory.
    Thanksin Advancve
    Regards
    raj

    Sales order
    Delivery
    PGI
    Update the RG1Which classification) - RMA for mov type 561- & IDH for delivery (for domestic sales)
    Billing Excise Invoice - J1IIN
    Extract the RG1..Which classification - No classification is req'd while extracting RG1
    post the RG1Which classification - ?what do you mean by POST here, There is nothing called POST.
    and one more thing is i maintaind in table J_2IRG1BAL....but it is asking Varient i saved the Data with some varient name....and if i go back and check the data ..i mean i clicked oon number of entries...thr is noe record in that Table
    FLOW is:
    -     VA01
    -     VL01N
    -     VF01
    -     J1IIN u2013 Capture EI
    -     J1IP u2013 Print EI
    -     J1I5- update RG1 u2013 (Classification u2013 RMA/IDH)
    -     J2I5 u2013 Extract RG1
    -     J2I6 u2013 Print RG1
    -     J2IUN - Utilization
    Maintain entries from SE11 - Table:J_2IRG1BAL- Goto Utilization -Table Contents - Maintain Entries & Save
    it will not ask for any Variant.

  • RG1 Value not updated

    Dear All,
    We are selling the material thru Sales BoM. For the same we have maintained Item Cat Grp ERLA & LUMF in material master.
    Druing RG1 updation the Qty is getting updated but not the value for the Sub Items. Can one guide how to updated the values for Sale BoM material.
    Thanks in advance.
    Regards,
    Mahendra

    Here you are using- ERLA which means pricing carried out at main item level-
    RG1 will update the qtty from GI doc & Value from Excise Invoice ( which will flow from Invoice) -
    So, in main item level pricing - value will not get updated in RG1-
    I guess Qtty also should not get updated, as GI document will trigger only for main item, but not for subitems-
    ( because PGI will happen for only Main Item)

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • PartII Registers are not updated for J1IS

    Hi All,
    Please help me to know, why there is no update for part II registers for Invoice for MRDY type , which was done through J1IS.Please help to configure these things
    Example:
    Returns PO  Created ME21N
    Goods posted :MIGO with Movt 161
    Part I updated with J1I5
    Invoice created with J1IS
    Registers updated with J2I5 and then J2I6.
    While doing J2I5 for part II, it is not updating the Part II register(I mean ,this transaction is not showing in J2I6)
    If I do the other adjustments in transaction J1IH, we can able to update PartII registers (J2I5 then J2I6).
    Please help in this regards.
    Thanks and Regards
    Jonnakuti Raju

    Hi,
    RG23A Part II register will have entries of Credit or Debit of Excise Duties, Excise Invoice created is not a part of RG23 Register.  Through J1IS only Excise Invoice is created, effect of debiting the excise duties to this respective excise invouce will happen only when you will do J2IUN for debitting the excise duty. Moreover you can see the list in J2IUN - Pending Invoice or in J1I7 , use ETT type OTHR.
    Regards,
    Vikas

  • RG1 Register not getting updated

    Hi,
    Need your help on following.
    We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
    Scenario has following steps
    Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
    Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
    Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
    Please guide how to overcome this situation so that RG1 shall be updated.
    Thanks & Regards,
    Khushal Agrawal

    Moving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);

  • Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. Help

    Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. App freezes, windows says to upgrade it.

    I went to Edit>Preferences>Advanced, G: is showing as the destination drive.

  • Cin registers are not updating

    cin registers RG23A RG23C PLA are not updating eventhough i have done al required l configurationl settings
    Edited by: akhilreddym on Jul 27, 2011 9:15 AM

    Hi,
    it wont update automatically, you have to update them manually.
    T-codes to view excise registers are
    J1I2 - Prepare a sales tax register
    J1I5 - Update the RG 1 and Part I registers
    J2I5 - Extract data for excise registers
    J2I6 - Print excise registers
    J1IR - Download register data
    thanks & regards,
    siva reddy.s

  • Assesable value is not updating in RG1

    Hi frnds,
    Please solve this prob. which I am facing.
    i am selling finshed goods.
    RG1 register is updating very well except the assesable value on which the excise is levied.
    Please guide me ,Is there any customizing setting are there ?
    I am using Jass condition typein my pricing procedure for assesable value.
    TaxINN is the tax procedure I am using.
    Please help me
    Sunil

    Why u maintained J1ID for TAXINN !
    J1ID only for TAXINJ
    In taxinn system caliclates excise duty based on , What is the base value in the sales pricing procedure for JASS.so it never consider assessbul value in J1ID..

  • Excise Invoice Cancellation did not update RG23A Part-II Register ?

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    HI
    As far as i know there is no part 1 or part 2 for RG1 register.
    regards
    Prashanth

  • Excise values are not updating in factory sales

    Dear SCN's,
    I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
    Thanks & Regards,
    Kumar

    The following note explains how you need to update J_2IRG1BAL table.
    Note 951955 - CIN: General clarifications for RG1 goods
    Have a look at this.
    G. Lakshmipathi

  • VALUES NOT UPDATED IN EXCISE INVOICE

    hi  gurus ,
                     well all the settings  to my knowledge are correct  for CIN customization  , but the excise values are not updated  in excise invoice .the values are 0 " . can ne1 pl help ? dts  top priority .

    Hi,
    Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
    Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
    It will update both the data in the register
    Rgs

Maybe you are looking for