RG1 registry not updating

Dears
I have gone through existing forums and  I was very clear about the functionality of the same but
there is one error which I am facing
SCENARIO
I have proceeded with the steps given in SD wiki and also I have gone through oss note 373001 which was quite helpful to certain limit because when I am using t-code J1I5 and entering parameters as mentioned in sd wiki page,system is givig me message,
"list contains no data" while execution.
Kindly let me know which parameters I have to enter or check!
Regards
KAPIL MORE

Hi Kapil,
Please follow the below steps and confirm:
1) Update the Packed/Unpacked indicator for each material in the table.
2) Include 561(initial upload movement type) in the CIN configuration.
3) Update RG1 for initial update Material documents.
Now the initial stock will be available in RG1, then you can try updating the regular transactions (601 etc.,).
With Regards,
Karthik
Edited by: sapsd_123 on Jul 18, 2011 3:54 PM

Similar Messages

  • RG1 Registers not updating fully

    Dear CIN gurus,
    RG1 register not updating full contents like opening qty  quantity  and closing balance qty  details. we are using ECC 6.0
    Opening balance Quantity , Closing balance quantity are not coming automatcally.its appearing zero while downloading throu Excel. Other receipts and Issues quantity and values are getting updated. Any config check is there.
    Pls help me to resolve the issue
    regards
    Jaffar

    Hi Mr.Muralidhar,
       Even i am facing the same Issue as mentioned above by Mr.Jaffer.
       In RG1 register,opening balances of materials are being updated after
       maintaining J_2IRG1BAL table entry.
       However, closing balance for the same material is not getting updated.
       For example, opening balance of a material is 1250 Units and no Issues
       have been done on the said day. But closing balance in register for the
       same material is getting displayed as Zero (0).
       Can you please help me to resolve the Issue.
        I also request all other CIN Experts to help me in resolving the Issue.
    Thanks & regards,
    RP

  • RG1 is not Updating Automatically

    Dear All Salute !!
    RG1 is not updating automatically in the system due to data migration on cutoff date since February; they are maintaining parallel in the legacy system (in Excel or any other), though here is updated project from 5.0 to 6.0.
    I am unable to understand, how the system is going on in the lacking of this.
    From Accounts Department side: Still Cenvat duty posting & statement (57AE) are done manually by dispatch/stores department. As per ECC6, system generated report should be available to the end users to avoid duplicate work & mistake.
    As per observation from SD side _no Opening Balance is uploaded while data migration_.
    I have got information through SDN about table J_2IRG1BAL but I am unaware of using this.
    Please provide me complete solution for this to do the needful instead of OSS Notes. 
    Rgds
    Srivastav
    +91-9973504950

    Adding to Komals reply,
    Please go through the sap note 951955 and check below comments:
    Please check whether you have maintained opening balances for
    all RG1 material in table J_2IRG1BAL. If not, please maintain opening
    balances for all RG1 material in J_2IRG1BAL for the date from which
    you want to run the RG1 report.
    Thanks
    Murtuza

  • RG1 register not updating

    Dear all,
    I searched in forum ...for my Question ...but all not releated to my Question...
    Let me tell you wot i did .....
    1) i created Material master and maintained Chapter ID-and Posted stock through MB1C with Moment type 561.
    2) Through T-code SE16 i updated Material master in this Table(J_2IRG1BAL).But data is not updating in htis table.
    How can i update the Data in this Table ..is thr any other way to update the data..is this mandatory.
    Thanksin Advancve
    Regards
    raj

    Sales order
    Delivery
    PGI
    Update the RG1Which classification) - RMA for mov type 561- & IDH for delivery (for domestic sales)
    Billing Excise Invoice - J1IIN
    Extract the RG1..Which classification - No classification is req'd while extracting RG1
    post the RG1Which classification - ?what do you mean by POST here, There is nothing called POST.
    and one more thing is i maintaind in table J_2IRG1BAL....but it is asking Varient i saved the Data with some varient name....and if i go back and check the data ..i mean i clicked oon number of entries...thr is noe record in that Table
    FLOW is:
    -     VA01
    -     VL01N
    -     VF01
    -     J1IIN u2013 Capture EI
    -     J1IP u2013 Print EI
    -     J1I5- update RG1 u2013 (Classification u2013 RMA/IDH)
    -     J2I5 u2013 Extract RG1
    -     J2I6 u2013 Print RG1
    -     J2IUN - Utilization
    Maintain entries from SE11 - Table:J_2IRG1BAL- Goto Utilization -Table Contents - Maintain Entries & Save
    it will not ask for any Variant.

  • RG1 Value not updated

    Dear All,
    We are selling the material thru Sales BoM. For the same we have maintained Item Cat Grp ERLA & LUMF in material master.
    Druing RG1 updation the Qty is getting updated but not the value for the Sub Items. Can one guide how to updated the values for Sale BoM material.
    Thanks in advance.
    Regards,
    Mahendra

    Here you are using- ERLA which means pricing carried out at main item level-
    RG1 will update the qtty from GI doc & Value from Excise Invoice ( which will flow from Invoice) -
    So, in main item level pricing - value will not get updated in RG1-
    I guess Qtty also should not get updated, as GI document will trigger only for main item, but not for subitems-
    ( because PGI will happen for only Main Item)

  • RG1 Registers Not Updating

    Dear All,
    We have done the entry in J1IN, and also done the update in J1I5, Using classification RMA & also done the Extract J2I5. But Still it is not getting updated in the Registers.
    Kindly guide me . What are the classification to be done for Updating Register...Please Kind Me.
    Regards,
    R.Ramakrishnaraj,

    Dear Friend,
    Make sure that the movement types for the material documents (say 101,131,601,641 etc) are updated in the below mentioned node
    Spro > Logistics general > Tax on Goods Movements > India > Business transactions > Incoming excise invoices > Specify which movement types Involve excise invoices
    for RG1 update
    Regards
    Venkatesh
    assign points if useful

  • Batch Split in OBD & billed for the entire Quantity .RG1  register does not update the excise values

    Hi All,
    I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
    The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
    As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
    Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
    Sales order (no batch determination)  , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
    Can somebody help me .
    Thank you

    My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
    Which field (H & J) they were referring in VBFA ?
    i have checked few other projects in my company and they all seems to be following the program
    How about the other projects' values in VBFA where your techinical team is guessing some issue.  Have you compared this?
    Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
    G. Lakshmipathi

  • RG1 Register not getting updated

    Hi,
    Need your help on following.
    We have a scenario wherein the material is a BOM. The actual delivery happens for lower level items (like MS Angels) whereas the billing happens on Header Material (say entire Structure).
    Scenario has following steps
    Sales Order --> O/B Delivery of Lower level Items (PGI) --> Dummy Delivery of Header Material (No PGI) --> Proforma (Header Mat) --> Excise Inv. (Header Mat) --> Commercial Inv wrt Header Delivery
    Their is no prcing at lower item level for which Delivery & PGI takes place. Excise Details have been maintained for Header material.
    Now when we are trying to update RG1 register, its not getting updated. I am aware that RG1 Register is linked to Goods Movement in Delivery & but in our case their is no Goods Movmt. for Header Mat.
    Please guide how to overcome this situation so that RG1 shall be updated.
    Thanks & Regards,
    Khushal Agrawal

    Moving this thread from ERP-MM to [ERP - Sales and Distribution (SD) General |SAP ERP Sales and Distribution (SAP SD);

  • Assesable value is not updating in RG1

    Hi frnds,
    Please solve this prob. which I am facing.
    i am selling finshed goods.
    RG1 register is updating very well except the assesable value on which the excise is levied.
    Please guide me ,Is there any customizing setting are there ?
    I am using Jass condition typein my pricing procedure for assesable value.
    TaxINN is the tax procedure I am using.
    Please help me
    Sunil

    Why u maintained J1ID for TAXINN !
    J1ID only for TAXINJ
    In taxinn system caliclates excise duty based on , What is the base value in the sales pricing procedure for JASS.so it never consider assessbul value in J1ID..

  • Excise Invoice Cancellation did not update RG23A Part-II Register ?

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    HI
    As far as i know there is no part 1 or part 2 for RG1 register.
    regards
    Prashanth

  • Lync 2013 Photos will not update from AD

    I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs;  Replicate this attribute to the Global
    Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
    "Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"  
    and finally we are setting the photo in ad using:
    "Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
    The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
    also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
    EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
    do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

    Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
    What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
    this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
    it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
    but unfortunately no change on my Client. I still see these users original photos.
    Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
    the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
    We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
    More info on the environment:
    4 main sites + remote users
    ~7DC's - 2003 DFL (1 at each site + a few at HQ)
    3 Lync Front end servers (2013) (All located at central HQ)
    2 Lync edge server (2013) (All located at central HQ)
    1 - 2010 Exchange server (Located at central HQ)
    2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
    About 100 HP 4110 Lync Edition Desk phones
    Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

  • Excise values are not updating in factory sales

    Dear SCN's,
    I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
    Thanks & Regards,
    Kumar

    The following note explains how you need to update J_2IRG1BAL table.
    Note 951955 - CIN: General clarifications for RG1 goods
    Have a look at this.
    G. Lakshmipathi

  • Best Solutions For Offline Address Book on Workstations Not Updating Frequently Enough?

    We use Exchange 2010 SP2 and we set Outlook 2010 to Exchange Cached mode by default for all workstations.  This seems to work OK for the majority of email most of the time, but because we are very frequently adding and removing external mail contacts
    and and adding and removing them from distribution lists, the GAL and  distribution lists memberships are frequently out of date in the middle of the work day.  
    Sometimes the users can manually download an updated OAB assuming it has been updated on the server, but sometimes the OAB is not updated yet and redownloading the OAB solves nothing.  It is a lot of hassle, confusion  about bounced messages and
    missing contacts and phantom names in distribution lists with this method.
    I notice that for mail contacts, there is an All Contacts address book that is live, but it does not include include anything else other than contact addresses.  Distribution List memberships are still out of date until the OAB is updated on the server
    and then downloaded to the Outlook client.  This is taking too long.
    Is there a keyboard shortcut to force the client to do a GAL address lookup in online mode rather than using the cached OAB?
    Can Outlook display both an online and offline address book for the GAL and let the user manually select online version of the GAL if a contact or new mailbox or DL has not synced to the OAB yet?
    If we set the registry key to force online address books even when Outlook is in cached Exchange mode, is there any performance downside for PCs on the LAN other than the GAL being unavailable when the network is not available?
    Would the Exchange server have a significantly higher load if most PCs were accessing the GAL without an OAB cache?
    If we should not expect a significant increase in server load or network traffic, we might set desktops to use online access to the GAL and only laptops to use OAB.

    Hi,
    If users are accessing the GAL without OAB cache, definitely it will increase in server load and network traffic. If you are in cached mode, one suggestion is to define that in Send/Receive Settings:
    Go to Send/Receive Groups -> Define Send/Receive Groups
    -> Select the account and Edit -> Select
    Include the selected account in this group, and check Download offline address book -> Click
    OK -> Go back to Send/Receive Groups, select the frequency for automatic send/receive(Schedule an automatic send/receive every x minutes.), and then close.
    I hope this setting can help in your scenario.
    Regards,
    Melon Chen
    TechNet Community Support

  • OEM - Oracle Job Status Not Updated

    Hi all, on the OEM I have some job scheduled for export and for backup (rman).
    Normally everything is ok, but now, after installing SP1 of Windows Server 2003, I can see the job starting but never finish. In reality the job is finished and I can see it on the output file.
    Seems to be that on the OEM the status of the job is not updated.
    This is a Fail Safe installation of Oracle 9.02 patch set 04.
    Please advise.
    Cheers.
    Franco

    Hold on, I am sure there is some confusion going on here. The registry settings are using used if there is a problem with refreshing planning, I thought the problem relates to business rule status not being updated?
    If you want to understand about processing rules in the background then you can take a look at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch02s07s06.html
    This may not resolve your isssue, maybe there is a communication issue somewhere.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Photo not updating

    Hi,
    The Lync Server 2013 installed and configured in our environment.
    We have imported photos to all users. All users can view the photo but some of the users couldn't view photo and other users photos.
    We have tried the following article but we are facing same issue only.
    http://social.technet.microsoft.com/Forums/en-US/d5df6c37-3efa-4359-b8db-49baf37d42f8/contacts-photo-not-updated?forum=exchange2010
    We have removed registry cache also.
    Please find the image for your reference. 
     

    Hi,
    Please run cmdlet Update-csaddressbook on Lync FE server, then delete user profile on Lync client computer, restart Lync client computer and test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for