RG1 Value not updated

Dear All,
We are selling the material thru Sales BoM. For the same we have maintained Item Cat Grp ERLA & LUMF in material master.
Druing RG1 updation the Qty is getting updated but not the value for the Sub Items. Can one guide how to updated the values for Sale BoM material.
Thanks in advance.
Regards,
Mahendra

Here you are using- ERLA which means pricing carried out at main item level-
RG1 will update the qtty from GI doc & Value from Excise Invoice ( which will flow from Invoice) -
So, in main item level pricing - value will not get updated in RG1-
I guess Qtty also should not get updated, as GI document will trigger only for main item, but not for subitems-
( because PGI will happen for only Main Item)

Similar Messages

RG1 Registers not updating fully

Dear CIN gurus,
RG1 register not updating full contents like opening qty quantity and closing balance qty details. we are using ECC 6.0
Opening balance Quantity , Closing balance quantity are not coming automatcally.its appearing zero while downloading throu Excel. Other receipts and Issues quantity and values are getting updated. Any config check is there.
Pls help me to resolve the issue
regards
Jaffar

Hi Mr.Muralidhar,
   Even i am facing the same Issue as mentioned above by Mr.Jaffer.
   In RG1 register,opening balances of materials are being updated after
   maintaining J_2IRG1BAL table entry.
   However, closing balance for the same material is not getting updated.
   For example, opening balance of a material is 1250 Units and no Issues
   have been done on the said day. But closing balance in register for the
   same material is getting displayed as Zero (0).
   Can you please help me to resolve the Issue.
    I also request all other CIN Experts to help me in resolving the Issue.
Thanks & regards,
RP

Contract value not updated in open order value of credit management

My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advance

hi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

RG1 is not Updating Automatically

Dear All Salute !!
RG1 is not updating automatically in the system due to data migration on cutoff date since February; they are maintaining parallel in the legacy system (in Excel or any other), though here is updated project from 5.0 to 6.0.
I am unable to understand, how the system is going on in the lacking of this.
From Accounts Department side: Still Cenvat duty posting & statement (57AE) are done manually by dispatch/stores department. As per ECC6, system generated report should be available to the end users to avoid duplicate work & mistake.
As per observation from SD side _no Opening Balance is uploaded while data migration_.
I have got information through SDN about table J_2IRG1BAL but I am unaware of using this.
Please provide me complete solution for this to do the needful instead of OSS Notes.
Rgds
Srivastav
+91-9973504950

Adding to Komals reply,
Please go through the sap note 951955 and check below comments:
Please check whether you have maintained opening balances for
all RG1 material in table J_2IRG1BAL. If not, please maintain opening
balances for all RG1 material in J_2IRG1BAL for the date from which
you want to run the RG1 report.
Thanks
Murtuza

Subscription value not updated despite payment made days ago

Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account

Hello and welcome to the Skype Community.
You have totally different issues. ALWAYS start your own topic please.
1.0. Philippines Subscription.
Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription.

Letter of Guarantee Value not Updating with Payments

Dear Expert
The requirement from the user is that when a payment is made , the system should deduct the amount paid and refresh the new available value for the customer.
For Example : A Financial document is created with 1000 value . And Sales order created for 8000 . Therefore now the open value is 2000. This means that the customer can order goods worth 2000 only.
In the meanwhile the first order is delivered and billed . And the customer has paid 8000 when he received the bill. this means that now he has paid so he can now order more goods worth 8000.
but in the system it still shows open value as 2000 , although now that the customer has paid, it should be updated with the payments made so the value can be used by the customer that he had paid.
If any of you has any idea how to tackle this ( it works same way in credit management ) but not in financial documents.
we were thinking of another work around , i.e by closing the Financial document that has been paid and creating a new one by adding the remaining balance. i.e 2000+ 8000 , this way the customer can again use his value. but then how can we automate the system to alert the sales user that the payment has been made for a certain invoice for a certain LG.
your idea's and suggestion are highly welcome
Best regards,

Dear ATGSD,
The functionality in GTS is designed for modelling of a single financial document for which the initial value is not updated.
I understand your user's requirement, but surely that is dealt with simply by setting a credit limit in the SAP ERP system? There should be no need to use the GTS functionality at all. In the ERP system, the credit limit is updated by the account payments, exactly as your user requires.
Please let us know if that would work, or if there are more detailed requirements that are not apparent from your post - thanks.
Regards,
Dave

Excise base value not updated

Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
Jeyakanthan

Awaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

Automatic Product Selection item value not updated in S067

Hello,
We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
The item category is marked as credit active. update group is 15.
If i do main item pricing then the value is getting updated successfully.
I check several notes but nothing helped.
Pls. help.
Regards,
Praveen

assigned it in sales order at item level in Billing tab
Assign the same at header level billing tab in sale order.
thanks
G. Lakshmipathi

Open order value not updated in F.35

Hi
While using item category Tas ( Third party item ) in Sale order, it is not updated in open order value at F.35.
please give your suggestions. thanks.
Regards,
Tirumal.R

1/ Check your credit control area settings
2/ Check your sales order config, if it works for one sales order type and not the other compare the two/

Invoice correction request (net value not updating)

Hi guys,
I have a problem when creating an Invoice correction request (RK).
When I change the Target quantity in the item (L2N), the Net value is not updated. So I have to go to Conditions and Carry out new pricing.
Any idea to fix this.
Best regards,
Eduardo

Hi Eduardo
Check the copy control VTFA , what is the pricing type it is being used and what is the quantity field maintained -ve or +ve or kept blank .
Even Go to item data->conditions tab and click on analysis you will know the problem why it is not changing the gross price
Regards
Srinath

Invoice value not updating for limit PO

Hi Experts,
SRM 5, SP 10 ECC 6.
Limit PO is created, invoice posted in ECC, the invoice vaue is not updating in the Statistics tab at item level of PO,Calculated Value is showing 0.00 only
any idea.
Thx

Hi David,
The problem is coming for limit order only, not for normal order and bbp_get_status is running fine for confirmation and normal po, so no need to run again

ITS templates - checkbox value not updated

Hi,
I am experiencing a problem with checkboxes in my Internet Service (similar to problem described in forum: checkboxes in ITS (again) ).
The checkboxes are inside a table (step-loop) and is blank by default. If the user selects the checkbox, the value is cleared after user input.
I executed the dialog program and it is fine.
The generated service template was modified to accommodate the step-loop. I'm using the SAP_TEMPLATE tags for the WEBGUI look & feel.
To set the checkbox parameter according to the user's input, should an if-statement be inserted in the code or should I use the parameter "onclick" with a javascript function?
I inserted an if-statement but it doesn't work.
Here's my code:
`SAP_TemplateTableBegin(title="Some title:", type="SAP_WEBGUI")`
`if ( IT_BEHAV-DESCR.dim > 0 )`
`repeat with j from 1 to IT_BEHAV-DESCR.dim`
`SAP_TemplateTableRowBegin(isSelectable="X")`
 `SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `IT_BEHAV-DESCR[j]` `SAP_TemplateTableCellEnd()`
 `if (IT_BEHAV-SELECT[j].selected)` checked `end`
 `SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `SAP_TemplateSimpleCheckBox("IT_BEHAVE-SELECT", VALUE="`j`")` 
 `SAP_TemplateTableCellEnd()`
 `SAP_TemplateTableRowEnd()`
 `end`
 `end`
 `SAP_TemplateTableEnd()`
If the check on the value of the checkbox is performed within SAP_TemplateSimpleCheckbox tag (e.g. `SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `SAP_TemplateSimpleCheckBox("IT_BEHAVE-SELECT", VALUE="`j`", "`if (IT_BEHAV-SELECT[j].selected)` checked `end`"
)` ),
the checkbox values are still not updated.
My Business HTML and Javascript is not very good, please help.
Your assistance will be much appreciated.
Regards
Liza-Marie

Hi,
I tried
`if (IT_BEHAV-SELECT[j]=='X')`checked`end`
but it is still not working. I am not sure where it should be inserted...? I added it inside the checkbox tag as follows:
`SAP_TemplateTableCellBegin(subtype="NONEDIT1")` `SAP_TemplateSimpleCheckBox("IT_BEHAVE-SELECT", VALUE="`j`", "`if(IT_BEHAV-SELECT[j].selected)` checked `end`")`
as well as before and after this tag, without results.
The tag SAP_TemplateSimpleCheckbox has the parameter onclick. I suppose this can be used to call a javascript function to control the checkbox values. I'm currently investigating this option, not that my javascript is any good!
If the input fields of length 1 is used inside the loop, would it still work like a checkbox? I mean, can the user input any character? Do you perhaps have example code for this?
Unfortunately I cannot debug on the ITS at this stage since I dont have access to the ITS server and it would take too long to get access or arrange for debugging to be set up.
Thanks for the help so far!
Regards
Liza-Marie

Values not updated in CRM ,CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile

Hi All,
We are unable to make changes in CRM
Implemented the Change BADI CRM_BADI_BUPA_MOBILE_CHANGE (For language and timezone fields).
please check my previous post.
Implementing CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile
On mobile made changes for these fields ,checked in DOE ,CE structures ,they are not updated with new values.
checked the FM CRM_BUPA_MOBILE_CHANGE ,BADI is getting triggerd.
How the dat flows ..mobile->doe ->crm ?(for update values)?
Thanks,
Anitha.

Hi siva,
Thanks for the information.
data : ls_address TYPE bapibus1006_address,
CALL FUNCTION 'BUPA_ADDRESS_READ_DETAIL'
      EXPORTING
        iv_partner           =ls_ce_bupa_hdr-partner
        iv_xaddress           = 'X'
      IMPORTING
        es_address            = ls_address
      EXCEPTIONS
        no_partner_specified = 1
        no_valid_record_found = 2
        OTHERS                = 3.
loop at ce_bupa_header into ls_ce_bupa_hdr.
    IF ls_ce_bupa_hdr-FIELD_NAME = 'LanguageKey'.
      ls_address-languiso = ls_ce_bupa_hdr-FIELD_VALUE.
    elseIF ls_ce_bupa_hdr-FIELD_NAME = 'ZTIME_ZONE'.
      ls_address-time_zone = ls_ce_bupa_hdr-FIELD_VALUE.
    endif.
      endloop.
CALL FUNCTION 'BUPA_ADDRESS_CHANGE'
EXPORTING
     IV_PARTNER                      =ls_ce_bupa_hdr-partner
      IV_PARTNER_GUID                 =
      IV_ADDRNUMBER                   =
      IV_ADDRGUID                     =
IS_ADDRESS                      =
       IS_ADDRESS_X                    =ls_address
      IV_DUPLICATE_MESSAGE_TYPE       =
      IV_ACCEPT_ERROR                 = ' '
U mean to say this?.
Will try executing and come back.
Thanks.
Anitha.

Values not updating in PCA

Dear All,
Here i need small clarification on PCA. in my scenario(ECC 6.0) the balance sheet items(g/l's) the amount is not updating in PCA tables (i.e GlPCA) it means line in 2nd line item value is not updating in totals table
Pls advise me
Thanks
Sudhan

Hi Sudhan,
Please refer to the note 180906 for Balance sheet accounts whose balances are transfered periodically to PCA. In such case,the update logic for total table:GLPCT and line item table:GLPCA is as
explained in the note. And if you drill down in such total bal report: i.e. 8A2N,the line items are different with the total amount.
regards
Waman

RG1 Value not updated

Similar Messages

Maybe you are looking for