RG23C-Part -I Serial Number Updation-Issue

Hi CIN Gurus,
        I am facing a problem in excise sap 4.7 version, wherein if I do the capital goods receipt via MIGO and also capturing excise invoice or creating only part-I entry along with it , the system is giving me 2 serial numbers with receipt and issue indicator for the MIGO Material document number in Table J_1IPART1.
       My client is not agreeing with the concept of two serial numbers for the same transaction and also in the PART-I register system is giving the serial number with receipt indicator. The client is reluctant to accept because there will be a gap in the excise serial number Part-I which is not acceptabe for excise authorities.
        Is there any remedy for making it to 1 serial number.
Thanks in advance and points will be suitably rewarded.
Regards
Gopal

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

Similar Messages

SHPCON serial number updates item on delivery but not item in HU

I am using SHPCON to update the item on delivery with serial numbers. After that I use SHPCON to pack that same item in a handling unit. From the pack screen I should be able to select the item and hit the serial number button and see the serial number. Instead it says there is no serial number on the item. I populated E1EDL11 under E1EDL24 to get the serial number on the item. I also tried during packing populating E1EDL46 under the HU item E1EDL44 but that doesn't work either.
Anybody run into this issue?

Hi,
If your Sloc is HU managed then need to maintain serial numbers in HU only.
i think you are doing packing at shipment level, HU should packed and serial numbers assigned then finally assigned to shipment document.
Rgds,
Kris.

Any Invalid Serial Number Installation Issue With PSE 12 - PE 12 Windows or Mac ?

http://forums.adobe.com/message/5711110#5711110
Today I went from Photoshop Elements 12 and Premiere Elements 12 tryouts to the purchased boxed versions that came with two installation discs. One of the discs was for Photoshop Elements 12 and Premiere Elements 12 Windows and the other for these versions on Mac.
On Windows 7 Professional SP1 64 bit desktop computer, I was hit with Invalid Serial Number for the installation of Photoshop Elements 12 which I did first. Tried 4X, double and triple checking to make sure this was not "user error". It was not. On the 5th try, the purchased serial number was accepted and the installation went to a successful completion.
Tonight a friend alerted me to reports of similar happening for a lot of Photoshop Elements 12 Mac users. See the link posted at the top of my post.
At no time did I see this problem with Premiere Elements 12 installation from the same disc as for Photoshop Elements 12 installation.
Afterward, I installed these programs with the same installation disc on my laptop computer Windows 8 64 bit, I did not have any problems with either installation.
At this time, I do not know if this Invalid Serial Number is elusive to Photoshop Elements 12 or not.
If anyone is experiencing this problem with Premiere Elements, please let us know.
From the link above, it would appear that Adobe is working on the issue.
Thanks.
ATR

shikha
Thanks for the reply.
In my case, I had the network firewalls and anti-virus disabled when I did the installs of Photoshop Elements 12 and Premiere Elements 12 on Windows 7 64 bit as well as Windows 8 64 bit.
I was fortunate in that a 5th try of the serial number entry for the Photoshop Elements 12 install on Windows 7 64 bit was successful, so I did not have to do the computer restart and retry of the install with the purchased serial number. But, good to keep in mind, just in case.
It is ironic...last time around I got caught up in the Shared Technologies issues with Photoshop Elements 11 and Premiere Elements 11 on Windows 8 64 bit, not Windows 7 64 bit. But, in that case, I did find my way eventually to a successful install on Windows 8 64 bit. This time around it was Windows 7 64 bit where the glitch occurred, but, for me, only for Photoshop Elements 12.
But, could you clarify...are you generalizing that Photoshop Elements 12 Mac Invalid Serial Number is due to server issues and Invalid Serial Number encountered by Photoshop Elements 12 Windows is "online - due to some firewall or network issues"?
Just getting prepared for if and when more questions on Invalid Serial Number might pop up in this forum.
Thanks.
ATR

X240 serial number update. Please help!!

New Lenovo X240 has extra digits on machine type and serial number.
I normally update serial number using a original method that boots into a utility, serialize new System Board starting:
1S(machine type)(serialnumber) (total 16digits) and system should be successfully setup
New product has extra digits so I could not update new serial number for the unit.
I'm seeking help from expert here in this forum. Please help !!
Thanks
Big

sameeroquai wrote:
What happened to my serial number? Should I be notifying apple?
It's nothing to worry about. If the logic board is replaced, there will no longer be a serial number visible to the OS. Just continue to give the one that's on the bottom of the iMac's foot, or on the box it came in.
The logic boards they use for repairs are refurbished and they just remove the serial number from them before they send them out to the people doing the actual repair. And the people doing the repair don't have the equipment required to add back the serial number.
charlie

Serial number updation in Assets after GR & MIRO for PO

Hi Experts,
I need a help on the following
We are buying for example 10 Laptops. we have created the Laptop as Asset , Created the Laptop as Material master and Maintained the serial number profile in Material master.
We created a PO with account assignment as "Asset" and included the Asset in PO, did the Goods Receipt with reference to this Asset account assigned PO, then at GR system asks for the Serial number and entered the Serial number and saved.
Did the MIRO for this PO and asset values are posted.
But after GR/MIRO System has updated only the quantity and Values not this Serial number.
I need to check how the system will update the Serial number in Assets, because there is a field in Asset display AS03 --serial no.
but here there is no update of the serial number.
Is there is any config settings is there for this. Please share your information on this.
Thanks in advance.
rgds
Swamy

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

IWork '08 serial number update help?

Can anyone please tell me if there is a straight forward way to update the iwork '08 serial number from a single user license to a family pack license? There does not seem to be a supported way to enter the new number, even after a re-install. Any feedback would be greatly appreciated!

It seems that re-installing the package leaves the existing preferences files.
Run this short simple script to remove them.
--\[SCRIPT]
set p2pl to path to preferences from local domain as text
set p2pu to path to preferences from user domain as text
tell application "Finder"
delete file (p2pl & "com.apple.iWork08.Installer.plist")
delete file (p2pl & "com.apple.iWork08.plist")
delete file (p2pu & "com.apple.iWork.Keynote.plist")
delete file (p2pu & "com.apple.iWork.Numbers.plist")
delete file (p2pu & "com.apple.iWork.Pages.plist")
end tell
--[/SCRIPT]
Yvan KOENIG (from FRANCE mardi 30 décembre 2008 20:42:39)

Serial number update on Lenovo X 3650 M5

Hello, please how can i update serial number on lenovo system X 3650 M5 server. please send me link if any bootable utility.

You can download the IBM ASU (up to version 9.63) from here:
https://www-947.ibm.com/support/entry/myportal/docdisplay?lndocid=tool-asu
If you are looking for ASU for new Lenovo Products, please refer to the following link:
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=LNVO-ASU
To change the serial number information, use the following syntax:
ASU set SYSTEM_PROD_DATA.SysInfoSerialNum SN_info
where SN_info is the serial number of the system.
For example:
ASU set SYSTEM_PROD_DATA.SysInfoSerialNum 1234567

ThinkPad Edge E320 UUID & Serial Number update using WinFlash

Hi All,
I lost my UUID & Serial number during the UEFI update, I saw a way to update them in ThinkCentre M series but I could not apply it on my Edge E320, is there a semilar way to do the same using WinFlash on E320?
Thanks in advanc

After todays restart original baterry capacity is restored back to 62+Wh, But current capacity is still 54Wh, higher than after last battery reset. I am upgrading to higher version of Power Manager.

Serial Number update in sales order creation

Hi All,
i am replicating sales from from CRM to ECC. here i am getting serial number in vbap table z filed. but i need to pass this filed in line iten Extras-- Techinal Objects-- please tell me in which user exit i need to write a logic
thanks
ram

Hi
In this include :- MV45AFZZ, there is form routine :FORM userexit_move_field_to_vbap. check this routine this will be helpful to you.

Reg: Serial Number Updation automatically .

hi frnds
IN tcode VL02N after giving the Outbound Delivery number selecting PACKING button there Iu2019m creating the Dummy Handling unit. But after creating the handling when i double click ok on the HU clicking on the Contents tab in that selecting line item click on the button serial number there i can see only empty serial numbers . My requirement is want the serials number based on items automatically .
thanks,
santhosh

Hi,
Please refer SAP note:
841270
- How to import serial numbers correctly via the DTW
Thanks & Regards,
Nagarajan

Part of serial number missing

last 8 digits of serial number are missing from photoshop elements dvd box

Serial number retrieval process FAQ | Point-of-sale activation products.
Thanks
Nikhil

Serial number/ upgrade issues....

Hiya. The company I work for has two macs with FCP on. Originally FCP version 4.5 was installed. This was later upgraded with a 5.1 upgrade. Since then a FCP Studio 2 upgrade has been purchased as we were told that we would be able to upgrade any version with the studio 2 upgrade. However when I try to do this I get a "you cannot upgrade from this serial number message. Is this because I am trying to upgrade an upgrade?? If someone could advise whether I am flogging a dead horse I would be most grateful thank you.

There are two different upgrade items for FCS2. The one you should have purchased is the other one.
The one that upgrades FCS 1 or FCS 5.1 is less expensive than the one that upgrades FCP 4.5 or below.
You need the one that upgrades FCP, not the one that upgrades FCS.
EDIT: You might call AppleCare and see if they will let you pay the difference between the two upgrade packages and get the one that upgrades FCP instead.

IB:How to update a serial Number which has Inventory Material Transactions?

Dear friends
first of all thanks for your time and valuable solutions
Install base: How to update a serial Number which has Inventory Material Transactions
problem description:
Install base > quick search
Here is Installbase record, when I query from quick search
Rec#     Item          Item Instance           Serial Number          Status
1     300-7000-01      3000000           1000XXX-0538JQ0003 Return for Adv Exchange
2     300-7000-01     8000000               1000XXX-0538JQ0003-     Return for Adv Exchange
3     300-7000-01     5000000               1000XXX-0538JQ0003-A     Return for Adv Exchange
looking above data, first and third records are the legitimate serial numbers(correct according to the client specs), second record is not legitimate since it has a dash as suffix, we found there are many illegitimate serial Numbers exists, needs to be updated with the right serial Numbers which I analyzed in excel after pulling data from mtl_material_transactions , oe_order_lines_all , mtl_serial_numbers , mtl_system_items_b
basically these are all RMAs
I need to update the second record as 1094SUZ-0538JQ0003-B as per the guidelines, while updating I need to keep all the existing contracts, Warranty, what ever material transations it has, need to be same.
we have a package updating the serial numbers using IB API (csi_Item_Instance_Pub.update_item_instance) but it is updating only the records which has no serial numbers present for that instance, if there is a serial number already exists it is not working.
user define error msg "Serial Number 1094SUZ-0538JQ0003- has Inventory Material Transactions. This serial number cannot be used to update an existing Item Instance", but I need to update this anyway!! or am I missing something here, please advice me
below post looks like similar issue, talks about hard update, I have no clue, by doing that the updated serial number will have same transations, contracts, dates....attached to it like the previous serial number
IB UPDATE_ITEM_INSTANCE ERROR - doesn't allow ACTIVE_START_DATE to change
would be great If you guys help me out, really appreciated!!
unfortunately I couldn't find any solutoin in metalink for the existing serial number update
code for updating the serial number using IB API
          x_msg_count := 0;
x_msg_data := '';
p_instance_rec.instance_id := rec.child_instance_id;
p_instance_rec.serial_number := rec.child_serial_number;
p_instance_rec.object_version_number := rec.child_object_number;
p_txn_rec.transaction_id := Fnd_Api.g_miss_num;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
csi_Item_Instance_Pub.update_item_instance
p_api_version => 1.0,
p_commit => Fnd_Api.g_false,
p_init_msg_list => Fnd_Api.g_false,
p_validation_level => 1,
p_instance_rec => p_instance_rec,
p_ext_attrib_values_tbl => p_ext_attrib_values_tbl,
p_party_tbl => p_party_tbl,
p_account_tbl => p_account_tbl,
p_pricing_attrib_tbl => p_pricing_attrib_tbl,
p_org_assignments_tbl => p_org_assignments_tbl,
p_asset_assignment_tbl => p_asset_assignment_tbl,
p_txn_rec => p_txn_rec,
x_instance_id_lst => x_instance_id_lst,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data
Thanks
Suri

Suri
Used this. May not be perfect but should get you there. Only if the table is registered (all the seeded tables should be registered) this will work.
select distinct a.table_name,b.column_name from fnd_tables a, fnd_columns b
where a.table_id=b.table_id
and upper(b.column_name) like '%SERIAL%'
Also this is very old one but if you need history for this change add the history insert logic as well..
DECLARE
l_return_err VARCHAR2 (80);
PROCEDURE debug (p_message IN VARCHAR2)
IS
BEGIN
dbms_output.put_line (SUBSTR (p_message, 1, 255));
END debug;
BEGIN
debug('======================================================================');
debug('Switching from serial number XDT07406. to XDT07406 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'XDT07406'
WHERE serial_num = 'XDT07406.';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'XDT07406'
WHERE new_serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
UPDATE wsh_delivery_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in wsh_delivery_details updated :'||sql%rowcount);
debug('======================================================================');
debug('Switching from serial number jct20591 to JCT20591 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'JCT20591'
WHERE serial_num = 'jct20591';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'JCT20591'
WHERE new_serial_number = 'jct20591';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_return_err :='Updating in one of the script has this error:'|| substrb(sqlerrm, 1, 55);
debug('Value of l_return_err='||l_return_err);
END;
Thanks
Nagamohan

Logic Studio Serial Number not accepted for Logic Studio 9 updates

I just purchased an upgrade from Logic Express to Logic Studio 9. I wanted to download the updates to current versions from http://www.apple.com/logicstudio/download/, but my serial number wasn't accepted on that page. I've checked the numbers (I copied them from the registration dialog just before pressing return - yes, the letters are all caps). Is there anything else I can try? Thanks.

I've seen lots of people posting about their serial not working yesterday, and experiencing it myself with my own serial.
http://discussions.apple.com/thread.jspa?threadID=2297318&tstart=0
I'm guessing their gateway server that authorizes the download by verifying your serial number had "issues" yesterday, probably caused by demand. I'm sure Apple posted the direct download page because of this.
Bobs

Excise Register RG23C Part 2 not updated

Dear Gurus
When I am running the procurement cycle for Excisable Capital items,register RG23C Part-2 does not updated in the system.
can anyone tell me the Proper steps for Capital purchase with Excise procedures.
and how would i update RG23C part-2 ? and necessary configure steps for the same..

answered in this link
Capital Excise Process
also check this articles
CIN Settings
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207dd2ad-bf92-2b10-a88b-e3a4a01ca7fc
Capital Procurement
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f
Edited by: Jeyakanthan A on Feb 4, 2010 7:10 PM

RG23C-Part -I Serial Number Updation-Issue

Similar Messages

Maybe you are looking for