RG54GS Internet DHCP Problem

I have this problem :
- Whenever my cable-modem restarts himself or loose connection for awhile MSI RG54GS cannot obtain new DHCP lease ...
Goes like this .... all is working fine .....
Cable modem goes offline (for some reason) , MSI obtains from modem a 192.168.1.x IP and stops trying to renew IP .
In system log whenever my cable modem give MSI a ip like this , there are no new DHCP renew tries . I have to go to web-admin page , to internet zone and choose DHCP client again ....
- Any ideas ???

if there's a possibility to set up on cable modem fixed ip, then set it up and...then set it up on router..

Similar Messages

WRT54G (v5) DHCP problem (MAC, APPLE, MAC OS) -- How to fix it

Ok, so I just got some instructions from Linksys support and apparently definitely got rid of the DHCP problem. Here they are:
Please reset the router before and after the upgrade.
To reset the router (make sure that the modem is disconnected when doing a reset):
1. Locate the reset button of the router at the back panel.
2. Hold the reset button for 30 seconds using a pen or a paper clip.
3. Release the reset button and unplug the power adapter of the router.
4. Leave the router off for 30 seconds then plug it back in.
Click the link below to download and save the firmware:
http://www.linksys.com/servlet/Satellite?c=LDownloadC2&childpagename=US%2FLayout&cid=1115417109974&packedargs=sku%3D1127782957298&pa gename=Linksys%2FCommon%2FVisitorWrapper
To do a firmware upgrade, you can follow the steps listed on this link:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/stdadp.php?pfaqid=557
Reset the router again after the firmware upgrade. You can then reconfigure it for Internet and wireless connection.

Hi, Malcolm:
Thanks for the post.
No, my new Mac Pro system does not have USB port on the Keyboard, cause I've opted for Apple's wireless blue tooth mouse and keyboard.
I do have 2 USB ports on the Apple's 23" LCD display, and Two USB ports on front side and two available USB ports on the back of the Mac itself.
During the Thanksgiving long weekend, I think I might accidentally singled out the cause of my problem.
I have my HP printer and one multi-card reader constantly pluged into the two USB ports at the back of my Mac, and always tried to use the front side USB ports for the 1GB USB Pen Drives, and that's where the problem lays!
When I unplug the Multi Card Reader from the back USB port, and suddenly all USB ports on my Mac works just fine with the Pen Drives!!!
So, for now, I plug the Multi Card Reader in one the the front USB port, and the rest of the USB ports on the Mac work with Pen Drives flawlessly, it seems that I sloved my problem for the time being...
As for those two USB ports on the back of my 23" Apple Display, They can not take my USB Pen Drives, as you've mentioned that it does not have enough power for the USB Pen Drives.
K C
Mac Pro 2x3GHz Dual-Core Xeon, Power Mac G4 dual 1G MDD, 5G iPod 60G Mac OS X (10.4.8)

RG54G2 Wireless Router Internet Connection Problem

Hi,
(apologies for the long message - trying to cover all details - summary: wireless router often drops internet connection)
I recently bought an RG54G2 Wireless Router, a CB54G2 PCMCIA Wireless card and a D-Link GWL-630 PCMCIA Wireless card. In addition to two laptops connected to the wireless router WLAN, I have two PCs (one Win WP Pro SP 1 and one Win98SE) connected to the router via wired LAN. I also have a SurfBoard SB3100 Cable Modem connected to the WAN port (this connects to my ISP - Optusnet (Australia) via DHCP).
The problem I have is that the internet connection is disconnected many times a day (often every few minutes, sometimes an hour or so). I am able to reconnect by resetting the wireless router via the wireless router configuration page. When the internet is disconnected I am still able to access the computers on the LAN/WLAN (via Windows Explorer and Ping), I am also able to ping the router and the Cable Modem, but nothing outside of the cable modem.
Also, when the internet is disconnected the System Status page indicates that the router is still connected to the internet, and the Diagnostics page passes the Test Connection test, though no external pings work.
I did not have this problem when the cable modem was connected directly to the Win98SE PC (and other PCs via ICS).
I have disabled the WLAN and the problem still exists with only the wired LAN.
I have changed numerous settings in the wireless router config page with no success (eg disabling DHCP and setting each IP address, minimising LAN and WLAN speeds to 10 and 11MBps plus others).
I have upgraded the wireless router firmware to R1.0.6.0 (no change to the problem).
Searching on Google I have found several other cases of routers with unstable internet connections (none refering to the MSI routers), but none had solutions that helped my situation (most replies suggested updating the firmware).
Any suggestions of how to make the router internet connection stable?
Thanks,
Mike

maybe this is the FIX 4 wireles router internet connection problem
please let me know if any one fix the problem with this tips
thankz
M. B. Feb 6 2004, 8:20 am hide options
Newsgroups: comp.os.ms-windows.networking.windows
From: "M. B." - Find messages by this author
Date: Fri, 06 Feb 2004 16:20:48 GMT
Local: Fri, Feb 6 2004 8:20 am
Subject: SOLUTION to my router loosing connection to Windows XP
Reply | Reply to Author | Forward | Print | Individual Message | Show original | Report Abuse
I am happy to report that after 8 days of constant battles, reboots, phone
calls, cable pulling, router changing, it seems that I finally have found a
combination that has had me using Verizon DSL account for over 12 hours so
far without any kind of interruptions.
Since so many of you tried giving me comments and suggestions, I felt that
it is necessary for me to post this here so that the next person will not
(hopefully) need to go through this hell as I did!
My original problem was that when after I purchased a D-Link Wireless Router
DI-624, I would get disconnected from Verizon DSL at least once every 2
hours or so. My internet access would "freeze" and then a little popup box
at the bottom right system tray would tell me that the "LAN cable has been
unplugged". After about a minute or so, my internet connection would be
back working This was NEVER happening during the 2+ years I was using my
Westell modem alone (running in router mode).
Please keep in mind: The problem I was having was not wireless related as
it was happening to the desktop computer to which the router/westell was
connected to!
During these last 8 days, I tried: one DI-624 wireless router, two Netgear
614v3 routers and two Linksys WRT54G v.2 routers. In addition, I received a
brand new Westell 2200 modem from Verizon. I also tried about four
different CAT-5 cables. Here is the final outcome:
I have the Linksys WRT54G (version 2) wireless router connected to the
Netgear Fast Ethernet FA310TX network card in Auto-Sense mode (using the
built-in XP drivers, as Netgear told me that there was never a newer
revision released). I have DISABLED the built-in 3Com Gigabit LOM (3C940)
network card (via the ASUS P4C800 Deluxe motherboard BIOS), DISABLED the
Zero Wireless Configuration service, and have put in the IP/Gateway/DNS
address numbers inside my Windows XP Network Connections | LAN setup. My
operating system is Windows XP Pro SP1 and the modem is a Westell 2200
configured as bridge only.
If my situation continues to be stable, I *might* try to go back to the 3Com
built-in card (disable any power management) and then re-enabling the Zero
Wireless Configuration services. But in reality, I am happy with the way
things are and have already spent enough time trying to get my router to
work with Verizon DSL without having it drop connections!
Now, the next step will be setting up the WIRELESS part of this. I don't
even yet have a laptop with me on the premises, but the 802.11g card that I
already have is the D-Link DWL-G650. I hope and assume that this will work
okay with the Linksys...
One thing I must say is that I never realized that how many problems other
users are having. I would have thought that since 802.11x has been around
in the mainstream by now 2+ years, that things would have been much more
"system friendlier". And again, my issues were not even WIRELESS related.
All 3 tech supports were not really helpful, as none of them realized that
the problem is somehow between the router and Windows XP (Ethernet card?)
loosing a connection, which of course results in Verizon DSL loosing the
connection also.
One other comment about the Netgear 614 v.3 router: A number of people have
responded to tell me that they have had this random "router resetting"
happen to them (where the routers behaves as if someone turned the power off
and then back on, and the lights flash) just as if you first turn it on). I
was lucky to witness it myself during one of the "disconnects" that I had.
This was actually the reason why I went back to try the Linksys one more
time. So, I would definitely recommend staying way from this 614 (version
3) model.
Once again - THANK YOU everyone!

Airport Internet Sharing Problem Mini - PC Laptop

Airport Internet Sharing Problem
My setup is:
Cable Modem -> Mac Mini --> PC Laptop
... with the connection between the mac mini and the PC laptop being the built-in mac mini airport using internet sharing.
Hi, I've been trying to set up Airport internet sharing with the mini, to no avail. It works off & on, but invariably the internet connections drop after about 10 minutes. The only way to get it started again, is to go into internet sharing, turn off internet sharing, then turn it on again. It will work for another 10 minutes or so (slow) after gong back to the PC laptop and reconnecting, then it chokes again.
I've tried the connection both with & without WEP, same behavior. I read somewhere that OS X only plays well with using Channel 1, so I tried that. No luck. Tried with and without Interference Robustness, no luck.
Tried with WEP on and using 40 bit hex keys using a "$" prepend in the mac as suggested on this web page:
http://www.macosxhints.com/article.php?story=20030803030354585
Same behavior, works for 10 minutes, then it chokes again.
Tried with & without the firewall.
Yes, personal web sharing is on.
The PC laptop works fine with any number of other wireless routers out & about town, at my girlfriend's house, so forth.
Any chance I have a bum mac mini wireless card or antennae or something? The reception strength on the PC laptop is good.
Just don't know what to make of it. So stupid, it seems like something pretty basic that ought to work.
Yeah yeah tell me to get a wireless router, but I'm not going to do that, that's one major reason I bought the mini in the first place and it would be nice if it worked as advertised.
Any other suggestions?

Works better now...
this is me again. A week ago or so, I noticed there was an automatic update to the wireless on the mac mini.
Since then the performance is much improved. My PC laptop connection to the mac mini no longer drops spontaneously.
Much improved! Thank you very much!
Yes, on occasion, when I leave and then come back to use the wireless, the laptop will not reconnect after multiple attempts; I have to turn of internet sharing and flick it back on again, but then it works all evening fore hours and hours straight with no problems.
Thanks Apple! It's usable now!

I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but it is correct.

I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but it is correct. I have re-set both router and all laptops - no joy. They can all see the network but cannot connect.

This is extraordinary. I have moved the router and also tried resetting it to its factory strings. We have had this router for over a year and all our devices have always worked. Now all four laptops will not connect to the internet. Only one oMac and our phones and iPad.
I have had far more devices running at once before but now all laptops are timing out on connection. Some say this iIP address is already being used but if I manually set to a slightly different IP address it does not help, noir if I manually set to the correct IP address. Why would all our laptops (four) suddenly be unable to connect?

How to resolve DHCP problem in Oracle for Cent OS

Hi everyone,
I want to install Oracle 10g on my new linux os CentOS. At very first step of system check, it warns me about having DHCP enabled and to use some static IP insted.
I have already done loads of installation on my windows box so I know how to deal with DHCP by using Microsoft Loopback Adapter.
But I dont know if there is any Loopback adapter available for Linux ? I have tried already to google but it seems that its really difficult to find the correct installation methods because most of "How tos" just ignore the fact that , web interface of EM won't work well with DHCP ( as far as i know :D ).
So, is there any work around for this DHCP problem ? I mean linux version of microsoft loopback adapter !!! ... Also do I need to say that , its my laptop and I use it on various networks including starbucks and DD ;) ... so I guess , I can't go for configuring static ip for my physical card. my knowledge for linux is a bit primitive so it will be really appreciated if you can provide me step by step instructions.
BTW, regardless of warning i have installed Oracle 10g, and as i had expected .... Web Interface of EM gave me an age old error ( web page not found ) when I restarted my laptop... which is because of DHCP.
Thanks in advance for any help
Peace,
Jack

Thank you guys for your advice. I really appreciate it.
But this does not solve my problem. I dont know weather you guys know or not , CentOS is EXACTLY same as RHEL other then "support" thing. So I dont see any reason to switch from CentOS to RHEL. Another reason is , I have already installed CentOS on my separate partition , so I dont want to go to through all of that again :D .
And even if i think to change to OEL( i have downloaded it already ) or RHEL , problem still exists ... " DHCP " ... how do i deal with it ??
for my friend damorgan,
a fixed IP address is preferable but if you need DHCP for some reason just do the install, build your database, and then modify the listener.ora and tnsnames.ora to point to 127.0.0.1 for the host. , I know I need fixed IP, but if I am installing it on my laptop and just for study purpose, Its really not useful to setup static IP and as i wrote in OP, life of student is very adventurous and we never stay at one place right ? so, its not possible to have static IP for me ( unless i use it with VMWare or something like that ) .... now question is, what is this 127.0.0.1 ip you are talking about ? Do i need to add it into HOST file ? A little brief explanation will be helpful here :) ... this stuff is damn easy with windows and i am sure that linux should have have work around of DHCP. I am writing LINUX , instead of going in to specific flavor because i think the solution will be same only the method will change, right ? .
I also looked at the link David posted here , (to be honest , I have not gone through all OSes setup help ) , I can not find even a line mentioning about DHCP Problem. May be I am missing something , David can you point me exact link (if there is any) ?
Any more suggestions guys ?
Peace
Jack
Edited by: Jack Locke on Dec 2, 2009 7:26 AM
Edited by: Jack Locke on Dec 2, 2009 7:31 AM
forgot to write :D lots stuff

"Internet Mail - Problem during delivery processing" email received

Every email I'm receiving as of this morning is accompanied by an email from [email protected], entitled "Internet Mail - Problem during delivery processing"
Is this an issue on the Mac server side or a problem with my Mail app?
Many thanks in advance.

My Wife and I both have an Ipad and an iPhone, I use an iMac and my wife a MacBook Pro.
I have this problem with all my devices.
My wife has NOT got this problem.
We both use a [email protected] email acount.
Just compared the settings:
For "Incoming server" I have p03-imap.mail.me.com
My Wife has p02-imap.mail.me.com .... and has not got this problem.
I have setup a new rule for incoming mails (for the meantime):
move all incoming emails from [email protected] to trash and delete it.
Works fine for now,......until APPLE deals with the problem.
Message was edited by: RTONLINE

When is Apple going to fix Yosemite's internet connection problem

Is Apple going to fix Yosemite"s internet connection problem?

Nobody here knows any more than you do about what Apple is going to do. If you want help from other end users with your problem, you'll have to describe it in more detail.

Omni 10 mostly internet connection problem, also difficulties responding generally

Dear all,
For two weeks now i am proud owner of an omni 10 tablet. However, i already encountered some problems like the loss of the audio System, which was luckily restored with the help of the hp support via telephone.
Unfortunately, my tablet is not properly connecting to the internet since yesterday. It also has problems opening PDF files with 'adobe read', deleting or newly creating appointments in the challenger app and foremost it sometimes does not open the settings section depite repeatedly tapping on its button..
Most important currently is the internet connection problem. Is connects but says at the same time that the connection is limited. Additionally, it does not offer any solutions to this. That happend with three differend routers so far..
I hope you can help me
Greetings

The only thing I can suggest is for you to follow as many steps in this document as you can: Troubleshooting Wireless Network
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

How to resolve this: Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode.

Keep getting this message while using Gmail "Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode. "
I have to use the older version of gmail for it to work properly.

now i cant even send emails out of gmail, except when using the older version.

%DOT11-7-AUTH_FAILED: Station c023.4921.2100 Authentication failed%Unknown DHCP problem.. No allocation possible

Hi All,
My wireless network system is consisting with 7.5 virtuall wireless controller and few 3600i APs.
All SSIDs & APs have been configured in flexconnect & flexconnect groups.
APs acquire IP address & controller IP address via DHCP option 43.
My problem is,
After I created a new SSID & pushed it. APs don't reboot itself but disconnecting from the controller and never come up back until give a manuall power reboot for each APs.
* DHCP server has not been configured any authentication mechanism for APs.*
I got below console outputs:
*Dec 5 16:56:42.830: %DOT11-7-AUTH_FAILED: Station c023.4921.2100 Authentication failed%Unknown DHCP problem.. No allocation possible
*Dec 5 16:56:54.226: %DOT11-7-AUTH_FAILED: Station c023.4921.2100 Authentication failed
*Dec 21 06:15:03.251: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Dec 21 06:15:03.283: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 21 06:15:04.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Dec 21 06:15:14.135: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 21 06:15:14.539: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 21 06:15:15.135: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 21 06:15:15.375: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 21 06:15:15.387: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Dec 21 06:15:15.395: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Dec 21 06:15:16.375: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec 21 06:15:16.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Dec 21 06:15:16.423: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 21 06:15:16.435: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 21 06:15:16.451: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 21 06:15:17.451: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Dec 21 06:15:17.451: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 21 06:15:17.491: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
., 26)1 06:15:17.983: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_WTP_EVENT_REQUEST
*Dec 21 06:15:18.587: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec 21 06:15:24.427: %EVT-4-WRN: Write of flash:/event.capwap done
*Dec 21 06:15:24.447: %LWAPP-3-CLIENTERRORLOG: Switching to Standalone mode
*Dec 21 06:15:24.459: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Dec 21 06:15:24.459: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.15.2:5246
*Dec 21 06:15:24.459: %CAPWAP-3-ERRORLOG: Invalid event 46 & state 4 combination.
*Dec 21 06:15:24.459: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 46, state 4
*Dec 21 06:15:24.459: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Dec 21 06:15:24.459: %CAPWAP-3-ERRORLOG: Failed to process Periodic Echo timer message.
*Dec 21 06:15:24.507: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
*Dec 21 06:15:26.419: %CLEANAIR-6-STATE: Slot 0 down
*Dec 21 06:15:26.419: %CLEANAIR-6-STATE: Slot 1 down
Anybody know the reason for this behavior ?
Thanks,
Charith

Hi Charith,
It's looks like AP goes into Standalone mode due to it cannot reach your WLC. In flexconnect when it cannot reach WLC, it will go into standalone mode without rebooting AP. (in local mode AP will reboot unless it can find a WLC)
Can you check your AP has reahability to your WLC all the time ? Where the DHCP configured for users ?
HTH
Rasika

I have updated all of my plugins and still cannot get any videos to play i get either an error message or internet connection problem message and my internet is working fine

videos have stopped playing on firefox, i get an error message on youtube, facebook and on netflix i get an internet connection problem, i have no problem with my internet connection, i have updated all of my plug ins...what has happened

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

Some Gmail features have failed to load due to an Internet connectivity problem.

This error message comes up both using Firefox and Chrome when using G mail. Also if it works at all,
switching from compose to draft just takes very long or keeps working.
No problem with G mail using Internet Explorer or Safari.
I have used Firefox for many years & want to go back when I can solve this Vexing problem.

Thank you for your help.
I reset Firefox, re started and wanted to answer using G mail with Firefox,
and the same error message comes up.. When it does the screan gets
very lite with the error message on top.
'''''Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, or using the basic HTML version. Learn More.'''''
I am now using Explorer to send this!
Sy

Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

Hello jessie029, and a warm welcome to the forums!
What browser do you connect with?
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tige
How to Flush DNS in Mac OSX using the Terminal.
In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
lookupd -flushcache
Reboot.

HT1657 get money back on a movie because of internet connection problem

I rented a movie but i had an internet connection problem, now after 24 hours it is fixed but my movie has expired. Can I get my money back ?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

RG54GS Internet DHCP Problem

Similar Messages

Maybe you are looking for