RGB import level conversion or not

I am trying to understand how to import RGB still and video digital files into FCP and make the levels come out correctly. This is not an analog setup question.
I find that when I generate a gray bar image in Photoshop and import it into FCP, that the gray levels shift somewhat. Specifically:
0% gray lum goes to 0% in FCP waveform monitor
10% gray lum goes to 18%
50% gray lum goes to 52%
100% gray lum goes to 100%
It doesn't seem to make any difference whether the file is based on an NTSC or Adobe RGB profile. The sequence settings are for NTSC CCIR 601/DV, process max white as white. Render RGB or YUY doesn't matter.
a) Should these numbers match? If so, how do you process the image file correctly?
b) Does a 18% in the FCP waveform display show up as 10% luminance on a properly calibrated and connected NTSC display? I.E. don't worry about it, the NTSC monitor corrects it.
thanks
Rick
G4 dual 1 GHz MDD   Mac OS X (10.3.9)  

Thanks Graeme, I missed the article the first time around.
I tried the 0.8 gamma correction in Photoshop, and it sure gets a lot closer. But it looks like I need to generate a custom curve correction fo really make it come out where it should.
This sure seems harder than it should be.
Rick
G4 dual 1 GHz MDD   Mac OS X (10.3.9)  

Similar Messages

  • A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe.

    Hi,
    After moving my files from SP 2010 to SP 2013 , for all my web parts i am getting A webpart or web form control on this page cannot be displayed or imported.The type could not be found or it is not registered as safe. error. I checked web.config files
    and they are there as safe control and trust level is also full. 
    These webparts work in 2010.
    Do i need to tweak something in code or distributed cache to make this thing work? The errors i see are
    Error importing WebPart. Assembly  c , Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29, TypeName. C. A Web Part or Web Form Control on this Page cannot be displayed or imported. The type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
    could not be found or it is not registered as safe.
    Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type C Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29
    could not be found or it is not registered as safe.    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)    
     at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()    
     at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
    An error occurred while attempting to add the gallery item [Custom] c to the page. The error was: Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The
    type c Version=1.0.0.0, Culture=neutral, PublicKeyToken=216eaf49984a9b29 could not be found or it is not registered as safe.    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.CreateWebPart(Boolean clearConnections)    
     at Microsoft.SharePoint.WebPartPages.WebPartImporter.Import(SPWebPartManager manager, XmlReader reader, Boolean clearConnections, Uri webPartPageUri, SPWeb spWeb)    
     at Microsoft.SharePoint.WebPartPages.WebPartGalleryItemBase.InstantiateFromXml(XmlReader reader)    
     at Microsoft.SharePoint.WebPartPages.WebPartAdder.SiteWebPartGalleryProvider.SiteWebPartGalleryItem.Instantiate()    
     at Microsoft.SharePoint.WebPartPages.WebPartGallerySourceBase.AddItemToPage(WebPartZoneBase zone, Int32 zoneIndex, WebPartGalleryItem item, String wpid)    
    Adit

    Hi Adit,
    According to your description, my understanding is that the error occurred when you deployed the .wsp files to SharePoint 2013.
    I recommend to check if all the assemblies are put into the BIN and GAC.
    If above cannot work, you can check the troubleshooting steps in the link below:
    http://www.bluedoglimited.com/SharePointThoughts/Lists/Posts/Post.aspx?ID=189
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Object in import-file header does not correspond to the migration object

    Hi Forum,
    I have loaded Business partner successfully with the file created in Workbench with test data.
    Now I want to load the data from Application server. But i am getting the error
    "Object in import-file header does not correspond to the migration object".
    I have read that the import file should have 3 types of record
    1. Header record corrs to the structure TEMINFO
    2. Actual data records
    3. Final record for individual object.
    I am not sure where I am making a mistake
    my files header looks like
    <004F><Space><&INFO><Company><Migration Object><User><Date><Time>
    Please help.
    Thanks in advance

    I am assuming you are in transaction EMIGIMP loading a converted migration file for import, correct?
    If so, you should be able to read the company, mig. object, user name, etc. in the import file tab overview.  If conversion did not work correctly, this info will not display here. 
    It is possible you are missing some data in the header, or spacing is not correct.  Are you converting the input file with program REMIG_FILE_TRANSFORM or are you trying to create the migration file yourself?

  • Automatic time conversion is not possible

    Hi Friends,
    I have a problem in Transformation Level when i am mapping "automatic time conversion is not possible for source field FISCPER to 0FISCYEAR,FISCPER3".can any one help me in this issue.
    Thanks
    Narasimha

    Yes if it was date filed then it would have been possible.If you are trying to derive the fiscal year between datasource and cube then you can get it with the help of simple filed level routine.
    Map your fiscper field from source to fiscal year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+0(4).
    For Posting period
    Map your fiscper field from source to fiscper3 year--Rule type Routine.
    RESULT = SOURCE_FIELDS-(Technical name of source field)+4(3).
    This will give you the required output.
    Regards,
    AL

  • About the effect for batch level conversion from material to plant level

    Dears,
    Now  we use batch management at material level in our system, now we want to change to batch level from material level to plant level, what effects or risks it will bring during the process of conversion?
    Thanks a lot
    Zhongkai

    Hi
    check the following SAP help link it is very helpful:
    http://help.sap.com/saphelp_40b/helpdata/es/d2/1d4b6e5733d1118b3f0060b03ca329/content.htm
    at the link you can find the following
    Specify batch level and activate status management
    In this IMG activity, you specify the following:
    the level at which batch numbers are unique
    whether batch status management is active in the client
    the plants in which batch status management is active
    the initial status of new batches
    Batch level
    Batch numbers can be unique at the following levels:
    at plant level
    at material level
    at client level for a material
    If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
    To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to numbers within Inventory Management using a transfer posting 'material to material'.
    If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical. In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
    When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
    Standard settings
    In the standard R/3 System, batches are unique at plant level.
    Activities
    To change the batch level, proceed as follows:
          1. Choose the level at which you want your batches to be unique.
          2. Save the new settings and choose Back.
          3. Select function Batch level -> Conversion.
          4. If necessary, carry out the conversion in test mode first.
    Further notes
    Note that you cannot reset conversion from plant level to a higher level in the standard.
    If you create a client by copying an existing client, initially, there are no settings in the target client at batch level. The system makes the settings in the target client only when you have carried out an activity (maintaining master data or posting a goods movement, for example).
    SETTINGS BEFORE/AFTER CLIENT COPY:
    Source client Target client
    Client level Material level
    Material level Material level
    Plant level Plant level
    Batch status management
    Batch status management is an additional function provided by the standard R/3 System.
    Standard settings
    Batch status management is not active in the standard R/3 system.
    Activities
    To activate batch status management, proceed as follows:
          1. Choose Batch status management active.
          2. Save the new setting and choose Back.
          3. Choose Batch status management -> conversion.
          4. If necessary, carry out the conversion in test mode first.
    Further notes
    Batch status management is linked to the batch level. At material and at plant level, the status management settings are valid within the client, that is for all plants. However, if you have defined batches to be unique at plant level, you have to select the plants in which status management is to be active using function Plants with status management.
    If you activate status management, all existing batches are assigned status 'unrestricted'. If you deactivate status management, the systems transfers all restricted batches to unrestricted stock within conversion. Restricted stock only exists if status management is active.
    If you create a client by copying an existing client, status management is automatically activated if batches exist in the target client, independent of the settings in the source client. If no batches exist in the target client, it is not activated. In this case, you have to activate or deactivate status management manually, if required.
    Plants with batch status management
    Activities
    To select the plants in which status management is to be active, proceed as follows:
          1. Set characteristic Batch status management for those plants in which batch status management is to be active.
          2. Save your settings and choose function Back.
          3. Choose function Batch status management -> conversion
          4. If necessary, carry out the conversion in test mode first.
    Initial status of a new batch
    Using this function, you can specify for each material type which initial status new batches are to be assigned. However, if you use a quality management system, this specifies the status of the batches.
    Hope it will help
    Best Regards

  • Setting Importance Level for a email message using javax.mail.* API

    Setting Importance Level for a email message using javax.mail.* API
    From what I understand we can set Flag on Email Message. How can we set Importance Leve: High/Low for an email message?
    Thanks
    Purvi

    Most of the message Flags work only for IMAP mailboxes. POP3 supports only the DELETED flag. It must be understood that Javamail is a framework which provides all the features available in a standard mailing system. But whether or not a particular feature works is a functionality of the particular implementation being used.
    Thus for example POP3 cannot differentiate read from unread messages in a mailbox though Javamail provides that feature.

  • BW Field level Autorizations are not working in the WEBI Reports

    Dear All,
    1. I have created Authorization roles with Infoobjects Authorization Objects.
    2. In Bex Query Authoizations are working on the Infoobjects like for
    Ex: For USER1 I have given Company code = 1000 &
    User 2 I have given authorization for 1100.....
    3. Import those roles into Business Objects-CMC.
    4.Users were Imported.
    But in the WEBI Reports BW Field level Authorizations are not working i.e for USER1 authorization for Company code is 1000 , in WEBI report it is showing all the Company codes data for USER1.
    For USER2 also showing all the data in the WEBI report.
    Plz help me on this issue.
    Thanks,
    Kiran Manyam

    Hi,
    For Authorization to work in BO you can check the following:
    1. You need to create authorization variables in your BEx query.
         Also these variables should not be input ready.
    2. While creating universe in BO you need to select "Single Sign On" option available in the parameters iwhile creating a new
        connection.
    Regards,
    Rohit

  • Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

  • Captivate 5.5 Is it possible to import PPT slides in Notes Page view?

    Hello experts,
    This may seem like an odd question. I'd like to display all the notes in the page of a PowerPoint deck that provides samples of code and explaintions of what the code is doing. It is too much information for the slide, which just has discussion point bullets, and I think it is too much for the closed caption pane. It this possible to import PPT slides in Notes Page view?
    Thank you so much in advance for any hints, tips, and replies.
    Kindest regards,
    P

    I found an alternative but circuitous way of achieving the desired result. In PowerPoint I opened, then I printed the PPT presentationto a PDF selecting the Notes Page option instead of Full Slide. By then using a PDF converter to convert it back to PPT I was able to insert the  PPT as is. In other words it "looks" just like the PPT Notes Page view, which is exactly what I wanted. The code snippet and notes were intact.

  • With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not work anymore. Why not, and is there a way to do both with the most current version?

    With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.

    Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?

  • Error importing *.SCA file into NWDS:  Import (into source SC) not possible

    All,
    When attempting to import an SCA into a new project in NWDS, an "Import (into source SC) not possible: SCA doesn't contain DC sources" occurs.  Any assistance to fix this issue appreciated.
    Thanks,
    Lee

    You can indeed import SCAs into local development configurations in NWDS (Eclipse). You have to have a pre-existing software component of the same name and vendor which may or may not be empty.
    In the Development Infrastructure perspective in NWDS 7.1, just right-click on the software component you want to overwrite with the import and choose "Import".
    To import SCAs into a CMS track in the NWDI, you have to go to http://<NWDI server>:5<nn instance no>00/devinf/ and import the SCAs from the transport inbox directory of the NWDI server. Don't forget to maintain the SLD if necessary.
    Cheers,
    Thorsten

  • Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can

    Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

    The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
    Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
    While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • PR to PO conversion should not happen in case of expired pricing condition in Info Record

    Hi All,
    Issue – PR to PO conversion should not happen in case of expired pricing condition in Info Record.
    In case of creation of PR/ PO, the Price is pulled out from the Info Record of the material. In our case if the Price in the Info Record is expired, it should give the Error Message & should pick the Price from the last PO created for the same combination of Plant, Vendor, Company code.
    Request you to please let us know if there is any way out.
    Regards,
    Karthick.V

    Hi,
    As per your requirement if info record price is not valid and in auto PO creation from PR, price should get picked from last PO, this is standard behavior and it will happen.
    If you check in customization MM - Purchasing - Environment Data - Define Default Values for Buyers -Settings for default values
    Default values if you check under price adoption , it has to be Always copy ( copying of conditions from last PO) . Pls check

  • The import archive file does not contain a metadata archive.

    when i am trying to upload template on webceter portal administrative console i am getting following error , so how to clear it "The import archive file does not contain a metadata archive."
    stack trace is
    SiteResourceValidateImportOperation> <doValidateImport> Operation aborted because of an exception thrown by subunit (oracle.webcenter.lifecycle.metadata.InitializeUnit)
    oracle.webcenter.lifecycle.InvalidEARException: The import archive file does not contain a metadata archive.
         at oracle.webcenter.lifecycle.metadata.InitializeUnit.extractTransportSet(InitializeUnit.java:372)
         at oracle.webcenter.lifecycle.metadata.InitializeUnit.doImport(InitializeUnit.java:232)
         at oracle.webcenter.lifecycle.metadata.InitializeUnit.doValidateImport(InitializeUnit.java:211)
         at oracle.webcenter.lifecycle.siteresource.operation.SiteResourceValidateImportOperation.doValidateImport(SiteResourceValidateImportOperation.java:107)
         at oracle.webcenter.lifecycle.LifecycleSiteResourceService.doValidateImport(LifecycleSiteResourceService.java:139)
         at oracle.webcenter.lifecycle.LifecycleSiteResourceService.doValidateImport(LifecycleSiteResourceService.java:110)
         at oracle.webcenter.lifecycle.view.siteresource.LifecycleSRMImportBean.doImport(LifecycleSRMImportBean.java:179)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(Unknown Source)
         at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
         at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
         at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
         at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
         at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    <SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal-admin and version v1.2. We will use the skin portal-admin.desktop.

    As in your other post, {forum:id=354} is a better place to ask

Maybe you are looking for