RH 10 is suddenly flickering between pagination and displaying

I am trying to work on a topic, but RH 10 is "flickering"... the lower right hand corner status (at the very bottom of the PM pane)  is flickering between "Pagination" and "Displaying".  The font and font size is flickering, and the Paragraph and Character Styles pod list is flickering from "Normal" thru the list and then back to "Normal" in a split second.  I cannot work in the topic...This seems to be happening no matter what topics I'm in... as well as if I create a new topic.
I did some PM organization of images and topics... and it was fine until then.  I have made all the updates I can find, restarted my system, uninstalled and reinstalled RH and reapplied the updates.
What the heck is going on?  HELP!

Hi there
I'd be shocked (and very skeptical) if someone were to pop in and say something like: It happened because you had... (insert reason here).
The thing is, there are a multitude of things that could be done to a project to cause this or that kind of a result. So all we can do is really guess at things.
So having said that, here's some food for thought.
When you work with RoboHelp, lots and lots of files are involved that track different aspects of the project. The main project database exists as a "ProjectName.XPJ" file. And another database exists as a "ProjectName.CPD" file. I do believe I've noticed that RoboHelp will sort of "flicker" as it attempts to ensure these two files are in sync. Sometimes we find that the .CPD becomes corrupt and will need to be deleted. When we delete it, as RoboHelp opens the project with the missing CPD, it sees the CPD is missing and sets about baking up a fresh one. And that process can cause the flickering as the database is rebuilt. How long it may take and you would see this would vary depending on the complexity of your project.
Not sure if it helps or not, but perhaps it explains why you are seeing what you are seeing.
Cheers... Rick

Similar Messages

  • My computer won't turn on.    When the charger is plugged in it flickers between yellow and green

    I was using my MacBook pro felt it charging and asleep for 4 hours.  I came back and it won't turn on.  When the battery is plugged in it flickers between yellow and green.

    First thing to try would be resetting the System Management Controller. If that doesn't fix it you are probably looking at a hardware issue. Carry the computer in to an Apple store or service provider, or call Apple to set up service.
    Best of luck.

  • Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

    two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
    https://www.dropbox.com/home/iphone
    https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

    Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

  • Screen flickers between dim and bright when on battery

    Hi - I've had my S10 for about a month now and overall am quite pleased with it.
    One annoyance I've come across is that when I am on battery (IE no AC plugged in) the screen sometimes flickers between dim (what it should be) and bright for about a second and dims down again. It will do that ever 4-5 mins or so.
    It seems as if the power management on the computer is a little on the fritz and can't decide if it's on be dim because it's on battery or if it should be bright because it's on AC
    Anyone else experience this?

    Im sure everyone experienced this with their S10's ... I would say it's normal because it changes power management to a lower grade... anyway I would say it's a sort of "hello... need attention" that your s10 is saying to you... It normally ocurs when your battery is low and you need to plug the cord cause it's running out of battery...
    Lenovo S10 - 6cell - 2GB RAM, since March 1st 2009 and still loving it...!!!

  • Maximum distance between workstation and display?

    Help, I need to know what is the maximum distance you can have between your computer and your 30" cinema display. I would like to keep all of the functionality like USB and Firewire ports. Unfortunately, I cannot find this info anywhere on Apple's website.

    Sure, I would bet that solution would work. What is the limit though? Here is the deal, my boss wants to put keyboard, mouse, tablet and display in a nice room. He also wants the computer to be in another room about 40 feet away. Can I successfully span that distance? I want to keep all of the functionality like USB and Firewire ports on the Cinema Display. Can I do this? Is there a distance limit that I can tell him?

  • Select Date between range and display

    Hello - i need some ideas to the following:
    I need to create a form to submit some information, with the
    date that form was submitted, to a database using php.
    Once the form is submitted i need to retrieve multiple rows
    from the database based on a selected date range, and display the
    information
    Question one - any ideas on the flow that i need
    question two - how do you think that i best record the date -
    given that i need to select a range later.
    question three - how do I select mutiple rows give a range of
    dates
    Thanks

    Hello - i need some ideas to the following:
    I need to create a form to submit some information, with the
    date that form was submitted, to a database using php.
    Once the form is submitted i need to retrieve multiple rows
    from the database based on a selected date range, and display the
    information
    Question one - any ideas on the flow that i need
    question two - how do you think that i best record the date -
    given that i need to select a range later.
    question three - how do I select mutiple rows give a range of
    dates
    Thanks

  • Timeperiod between onClickButton and Display

    Hi,
    I was programming an iView which did quite a lot of data acquisition in the backend. When the data collection was fast I did not have any problems displaying the results.
    As soon as the data collection took longer (more than two minutes) I had problems displaying the results in the portal. Not only was the result a blank screen, but also the portal was not running anymore due to JavaScript errors.
    To trace the error I programmed a small "JSPDynPage"-iView with only one button which did (almost) nothing but cycle through several for-loops [see code below]. The result was still the same: blank page.
    So does anybody know how I can accomplish this task? Is there a way to return to the JSP and display some temporary results and then when my data collection is done display the rest?
    Thanks for any help,
    Holger.
    public void onTest(Event event) throws PageException {
         myLogger.info("[onTest] - Start");
         StringBuffer longTmpString = new StringBuffer();
         for (int i=0;i<100;i++) {
              longTmpString.append("Test\n");
              if (i % 10==0) {
                   myLogger.info("[onTest] - i="+i);
              for (int j=0;j<100000000;j++) {
                   String nix = "";
         myLogger.info("[onTest] - Set Bean");
         myBean.setResults(longTmpString.toString());
         myLogger.info("[onTest] - End");

    Hi Holger,
    for service implementation / usage see within EP: Java Development - Documentation - Services - Concept - Portal Service Implementation Guide.
    For more questions about handling the situation you described see also this thread form message bar and loading icon
    For awarding points for so nice people as Dagfinn and me, press the yellow star button at the top right of the reply you liked.
    Hope it helps
    Detlev

  • Sudden problem between iMovie and my Graphics Card?

    Hello all-
    Please forgive any omissions, first time posting.
    I'm running Tiger 10.4.9 on a G4 iMac Desktop, 800 MHz w 768 MBram.
    My graphics info is apparently: NVIDIA GeForce2 MX:
    I only recently had iMovie HD 6.0.3 start displaying an alert message detailing it's requirement of a 'Quartz Extreme Compatible' graphics card. This is news to me, since I've been using this version of iMovie since October 06 without this alert cropping up. So this seems Out Of The Blue.
    Funny thing: I've booted the computer from the Tiger startup disk a couple of times since this error began - to check if a disk repair is needed - and with each assisted reboot the graphics card is correctly recognized/supported... once. One unassisted boot. After which it reverts to 'Quartz Extreme Compatible' unsupported once again.
    I swung the problem briefly past a genius at a MacGenius bar, who felt the problem was probably not the card itself going bad, (as she thought the card would fail entirely if it was having problems) but either corrupted software in the system, or a HardDrive problem. I have no other evidence that my HD might be failing, so I'm left with her other advice, to do an Archive and Install.
    Honestly, nothing's been installed or updated recently. If I had to guess, it
    -may- have started after Quicktime failed to play an .avi file off CD this week, but I can't be sure, as I hadn't tried HD for a little while before then. Could QT bombing out have corrupted a system file?
    Would you also suggest an Archive and Install? And what sort of system clean-up can I expect after such a procedure? Is there a less radical fix?
    Thanks for any thoughts,
    Andrew
    Minneapolis
    iMac G4 Desktop   Mac OS X (10.4.9)   Graphics : NVIDIA GeForce2 MX:

    Hi Folks,
    I am running a G-4, 1.25 Gz, 2 gigs ram, running 10.4.9, and a Radeon 9800 pro graphics card. I am having the same problems. I have tried the solutions mentioned here and still have the same problem. I have tried saving the iMovie to to my desk top, run permisions. The Graphics/Dispalys in system profile says
    ATI Radeon 9800 Pro:
    Chipset Model: ATY,R350
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4e48
    Revision ID: 0x0000
    ROM Revision: 113-A07525-130
    Displays:
    CPD-E540:
    Resolution: 1344 x 1008 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Supported
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    So what is the solution...Do I have to retrograde back to iMovie 5?

  • Mac battry flickering between detected and not detected

    I had a question about my macs battary. Recently it started showing it was not being detected by my comp then suddenly it was being detected a few days later then it was not being detected again. Has anybody had a similar problem before?

    Take it in for testing.
    Barry

  • Difference in workschedule text between T508A and display in IT0007

    Hi,
    I have made a change in text description for a workschedule in T508A and then transport my change into Test system. But I have now no correspondance between the value in T508A and the value displayed in IT0007 with F4 or when WS selected.
    I have tryied to transport again my entry but this is not solving the problem.
    Does anyone already have this issue ?
    Thanks a lot,
    KR
    Greg

    Hi Gregory,
    Please review this thread, your solution is there.
    Re: work Schedule rule Text
    why don't you debug it?
    you can break-point RE508S routines.
    MODULE GET_RTEXT INPUT.
      PERFORM RE508S USING P0007-SCHKZ.
    ENDMODULE.
    alternativlely this is the abap select sentence:
    CHECK T508S-SPRSL NE SY-LANGU
         OR T508S-ZEITY NE T503-ZEITY
         OR T508S-MOFID NE T001P-MOFID
         OR T508S-MOSID NE T001P-MOSID
         OR T508S-SCHKZ NE T508S_SCHKZ.
      SELECT SINGLE * FROM T508S WHERE SPRSL EQ SY-LANGU
                                 AND   ZEITY EQ T503-ZEITY
                                 AND   MOFID EQ T001P-MOFID
                                 AND   MOSID EQ T001P-MOSID
                                 AND   SCHKZ EQ T508S_SCHKZ.
      CHECK SY-SUBRC NE 0.
      CLEAR T508S.
    You probably have corresponding entry with no text (if sy-subrc is 0) or no corresponding entries (if sy-subrc has other value than 0).
    Good luck.
    Cheers.

  • Scrolling lag? Delay between touch and display.

    I've had 4 replacement iPhone 5's so far and the latest one seems to have a slight lag between the touch and the response I get from the display. Furthermore, if I go to any webpage and scroll up and down sometimes it'll stop scrolling completely and ignore my touch.
    http://www.youtube.com/watch?v=BnioM-nkhqc
    This video does an okay job of demonstrating the issue but I haven't noticed it on my previous replacement iPhones, only this one. I know they opened up my current one's hardware to tighten a screw on the lock button but am unsure as to whether or not the display was affected. I don't know if this is a software issue or a hardware issue but some reports are saying 6.1 fixes it. However, I'm on 6.1.4 and restored twice already and the issue still persists.

    One way to replicate this is to go into safari and onto a page like Yahoo.com and continuously scroll up and down. After a few seconds sometimes it will stop scrolling altogether. I don't have another iPhone with me to test this problem and finding videos of people scrolling is harder than I thought. I just don't want to go into the Apple store again and have them tell me it's not a big deal and send me home. Also, the acceleration on scrolling never seems to get very high and stays at a flat rate unless you contiuously swipe the screen. I thought it was supposed to accelerate depending on how fast you flick with your finger as it has done in all my other iproducts but this is not the case and everything seems to lag.

  • Switch between Edit and Display mode in an input layout?

    Hi,
    I want to create a button in my planning layout which is input ready,  that makes it able to change between display mode and edit mode.
    I'm on BI 7.0. And I am using Analyzer/Workboook.
    Is this possible using 'SET_DATA_ENTRY_MODE' command?
    If Yes,  Where should I put this  command ? I can't  find this in Button Properties.
    Please explain in detail.
    Thanks,
    Srini.

    Hi,
    This is the correct command. In the button properties, you need to select 'command via command wizard'. There you should select this command and customize it according to your requirement (on/off).

  • Trash or Dust, between led and display glass

    Hi, theres come kind of dust or trash (not secure) between the led screen and the display glass, i did almost everything to remove it, but i cant do it. What should I do?
    In advance, Thanks.

    If the dust or trash is between the led and the glass the only thing you can do is take it to apple.

  • Bent Unibody - Gap between body and display normal? (Pics)

    Hi!
    (First of all.. i'm not from america so my english may not be the best but I thoght about posting here 'cause I think I'll find qualified users here )
    I have a unibody MacBookPro 2,53 Ghz!
    After having it a while I noticed that my unibody is bent a little.. I have a gap (on the left side it is more than on the right side) of 2mm!
    But it seems, that not the display is warped but the unibody!
    Is this "normal" ? Or should i replace it?
    I have some pictures here for you to see how it looks like:
    http://i104.photobucket.com/albums/m173/lennyisland/DSCN4318.jpg
    http://i104.photobucket.com/albums/m173/lennyisland/DSCN4331.jpg
    http://i104.photobucket.com/albums/m173/lennyisland/DSCN4315.jpg
    http://i104.photobucket.com/albums/m173/lennyisland/DSCN4336.jpg
    I would be very happy about some answers
    Have a nice day!
    Lenny

    Hey
    Thanks for the nice welcoming!
    So I see the opinions are different!
    Travis you said that you also have this little gap! But does it look like mine MBP or do you just mean that the display isn't perfectly fitting?
    I will call Apple and ask them about this problem!
    But I'm not sure if they will replace it because i am out of the 14 Days ( I don't know how it is in the usa but here in germany we have 14 days in which we can get it replaced whithout giving any reason)
    So if it won't be replaced my question is: Who has a Unibody MBP here and has the same problem (or not) ? For me it would be interesting to know if only my MBP has this "problem". (you can compare with the pictures)
    thanks for the answers by now

  • Macbook Pro "flickers" between battery mode and AC mode?

    Hey guys, I'm on the newest update of OSX 10.8.1 and I just noticed that my old 2008 Macbook Pro is acting kind of funny.  I read that the laptops are designed so that after a full charge, it will run off battery power until XX% before recharging again.  This guy is flickering between full and 98%, which is slightly frustrating considering they have different lightness levels.
    This didn't happen in 10.8, so I'm not quite sure what the update did.  I think some other people are having battery troubles with the new update as well.
    I'm not sure why this $2000 machine has more problems than my 10 year old $400 laptop, but it seems apple doesn't really provide support for the older models?  I would be very grateful if I got a response other than the "did you try rebooting it?/resetting the PRAM" and the "just buy another/newer xx."  Thanks in advance

    If you are using iPhoto and if you have a managed library then by default your photos are in the Photo library in the pictures folder in your user account
    If you are not using these then they are where you put them
    LN

Maybe you are looking for