RH 11 CSS Mapping Styles issue with Word 2013

Hello members,
Any help will be much appreciated.
Platform: Win 7, RH 11, Word 2013 however, using an existing Word Template that was created in Word 2007.
HISTORY:
Six months ago, an upgrade of RH8 to RH11 took place (smooth, no issues reported). Please note, I have no "easy" way to verify if there was a problem in RH8 (all projects are upgraded, and old builds are backed up on IT server).
There are existing Styles created in RH and in the Word Template (e.g., Heading 1, Heading 2, Heading 3, Normal, normal_bold, etc.). These existing Styles have no mapping issues hence, RH CSS recognizes their corresponding Word Styles.
ISSUE:
RH11 CSS does not recognize New RH Styles and Word Styles.
NOTE: Styles are the same type. “For example, character to character, paragraph to paragraph, table to table, and multi-level list to multi-level list” (http://help.adobe.com/en_US/robohelp/robohtml/WS5b3ccc516d4fbf351e63e3d11aff59c2a0-7ee4.ht ml#WS21E2B5E4-C4AC-47b2-9D4B-D548EA9E3C04).
Things Tried:
Converted (SaveAs) my template .dot (Word 2007) to ".dotm" (Word 2013) = No change in issue mentioned above.
What do I see when I create new Styles in RH CSS and Word Template: I am able to map Table and Multi Level List.
Purpose: Working on a documentation standard project. Creating New Styles ‘based on’ existing styles. For example:
RH CSS
ListBullet
Style: Paragraph
Formatting: Font =10pt
Indents: Left = 36pt
Spacing: Before = 0px
Paragraph: Alignment = Left
Indentation: Left = 18pt, Right = 0pt, Special = Hanging (By 18pt)
Spacing: Before = 6pt, After = 0pt, Line Spacing = Single
Advanced:
Word Template (.dot)
ListBullet
Style: Paragraph
Style Properties: Name = ListBullet, Style type = Paragraph, Style based on = Normal, Style for following paragraph = ListBullet
Formatting: Font = Arial Font style = Regular, Size = 9pt, Font color = Automatic (black), Underline style = none
Paragraph/Indents & Spacing: Alignment = Left, Outline level = Body Text
Indentation: Left = 0.25", Right = 0", Special = Hanging (By: 0.25")
Spacing: Before = 0pt, After = 6pt, Line Spacing = Single, Selected (Don't add space between paragraphs of the same style)
Paragraph/Line & Page Breaks: Pagination = Window/Orphan control, Tight wrap = None
Bullet Format: Font = Symbol, Font style = Regular, Size = 9, Font color = no color
Problem I am having is as follows:
RH Wizard section - Print Document Appearance
Project’s CSS Styles (Used Only or All)
ListBullet
Microsoft Word Styles (all)
Unassigned – Use style in project) drop-down list
The Style “ListBullet” does NOT show in the list
NOTE: This anomaly I just reported happens for ANY new ‘Paragraph Style’ I create. If I create a List/MultiList, and the names of the Style are the same in RH and Word, RH Wizard automatically maps them. However, reading on multiple forums, authors have reported problems with Indentations (i.e., Word over extends the indentations); I have see this as well.
PS - Happy Holidays to you and your families. My Best, ~PM
PSS - Hi Peter ... I reviewed your site and this site, and Googled as well before posting.

Thank you Peter and Amebr for your assistance. I ended up using RH Multilevel List Style, configured, and created an identical List Style in Word. I created a Single and a Multilevel (e.g., Level = bullet, Level 2 = squares); their challenge is matching RH indents with Word Indents... It's sort of a bear since RH does not have the Format Paragraph option (ref. drop-down) like Word Lists - Numbering functionality.
After generating my print document mu Bullet style reads "Normal (Web)"; even though the RH CSS Wizard recognized Word List Style I created (Ref. Font: Symbol, Font color: Black, Indent: Left: 0.15", Hanging: 0.25", Outline numbered + Level: 1 +, Numbering Style: Bullet + Aligned at: 0.15" + Indent at: 0.4", Priority: 100, Based on: No List.
Question: Would anyone out there know why is when I highlight my bullet list to verify the correct Style (with the Styles pane open) and I see the "Normal (Web)" [its Style type = Paragraph and Style based on = Normal) is selected? If it came through (from Rh) as a true Multilevel List Style, I should not see anything.
Happy Holidays!
~PM

Similar Messages

How can I resolve an issue with Word 2013 incompatibility errors?

My Client is continually having issues with his Office 2013 installation, specially with Word 2013.
After re-installing Office 2013, he gets the following error when trying to run Word.
When he clicks on the Repair now, he gets the following error;
He used the Microsoft uninstall tolll to fully remove Office 2013 before re-installing Office 2013.
His PC is running Windows 8.1
Any help would be appreciated.

Hi,
Do other Office applications occur the same issue?
Based on this error message, I find a similar issue.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/keep-getting-error-were-sorry-but-word-has-run/b9a014db-c4c6-46aa-95b1-679308735f66?page=5
You can follow Mpw1979’s reply, here is detail information.
“When I tried to change the compatibility mode on Winword.exe I found there were no options available so I right clicked and selected Troubleshoot Compatibility.
From here select Troubleshoot Program then tick I Can't See My Problem Listed and then select Windows 8 from the next screen and apply the changes and it worked.
I should also note I had Abbyy finereader installed and the plugin was causing Word to crash so i simply opened in safe mode and disabled the plug-in.”
Regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue with Word 2010

Hi Team,
We are facing issue with Word 2010.
User has created a document in Word 2007 and they inserted a symbol °C in Times New Roman and Areal.
Please find below the text which has issue.
干燥温度：60℃
温度：95℃，
In the document, instead of ℃ it is showing blocks, when we open it in MS Word 2010. (Eg: 60℃, 95℃).
We have tried the following.
1.       If we select the square and click on any other font, it will change to °C with formatted font Cambria Math. We can have it by selecting any font.
2.       I have tried to copy the line and paste it to excel/WordPad/notepad
• Excel(2010) : It is displayed properly(°C) but the font was Times New Roman and Arial as the word document has Times New Roman and Arial respectively.
• Notepad: It is displayed properly(°C) but the font was Lucida Console
• WordPad: The symbol is not displayed correctly (Squares and vertical lines). It is having the same issue as we have with word document.
3.       I just selected the whole text and had Ctrl+space , then all the corrupted characters turned to original one (°C with formatted font Cambria Math) : we can use this as a work around.
4.       I have created a word document and I typed °C in that document with fonts Times New Roman ,Arial, SimSun and STKaiti and saved the document. When I opened the document I was able to see °C properly.
Kindly help.
Regards,
Sooraj

Hi Sooraj:
For checking the encoding of your documents, please follow below steps:
Rename your documents from xxxx.docx to xxxx.zip
The zip folder will contains basically folders: rels, docProps, word and one [Content_Types].xml
Browse to word, open document.xml file,
<?xml version="1.0" encoding="UTF-8" standalone="true"?>,
the first line will suggest the encoding type of the document.
Except checking the encoding difference, could you please do one more thing that is copying the font like
“Times New Roman” from a computer which display the symbol correctly to the computer which has issue, and please let me know the results, thank you.

Browser usually crashes whenever I want to upload a Word or PDF file? is that an OS issue or compatible issue with Word for Mac

A lot of times I would have to reset Safari while I do this and then it might work afterwards, I just find it annoying and time consuming, sometimes I might have to reboot my machine as well. Not sure whether it's an OS issue or an issue with Word that the system doesn't like word too much. I get the spinning ball and I have to do a hard force quit using my keyboard in order to stop the browser when it stops responding, then go ahead and reset safari like I stated previously.

I have tried Opera, which is somewhat better but it crashes if I have to look for the file within the system like with Safari, it will by default look on the desktop, if I try to change it to documents for example that's when it can go crazy, with Opera it will by default open in documents but say if I wanted to change it to desktop to look for the file, it can go loopy. Looks like it either the browser or OS doesn't like changing different folders to upload files.
How's Firefox on a Mac? is it better than on Windows?

Problem with Word 2013 through VPN

Hello,
From several weeks my company has a problem
with Word 2013 when laptop is connected to the network
via VPN.
Symptoms:
- Word 2013 is opening very slow (even
opening a blank card)
- there are no matter if I try to open blank page or network files
- All other Office 2013 components are working fine (Excel, Powerpoint etc).
- When I disconnect from a VPN, Word is opening properly.
It is not a problem with VPN because:
- Word is opening locally (not network files)
- before we had Word 2010 and it was working smoothly
Does anyone know a similar case
and could help solve this problem?
Regards,
Pawel

Hi,
"- before we had Word 2010 and it was working smoothly" -
Word 2013 might deal with documents in different ways.
Since Word will open properly when you disconnect from a VPN, you might want to start by analyzing the network traffic, VPN connections.
Please try to check the option "Copy remotely stored files onto your computer and update the remote file when saving" in
FILE>Options>Advanced>Save section, and then verify result.
The other thing to check is add-ins. I'd suggest you to start Word in safe mode and see if issue persists:
Press Win + R and type "winword /safe" in the blank box, then press Enter.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issues with SharePoint 2013 after upgrading from windows 2012 to 2012 r2

We have a Sharepoint with Sp1 environment on windows 2012. Recently we upgraded the windows 2012 to 2012 r2. After the upgrade sharepoint environment is completely unstable.
At first all the sites returned 401 errors. After resolving by resetting the object cache accounts the sites are back.
Then i see that none of the performance point dashboards work. I figured that claims to windows token service is defaulted to local system account. I previously configured with a domain account. I reconfigured to work with domain account.
All the dashboard pages throw error.
Some Error logs:Failed to get document content data. System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow
Application error when access /Dashboards/Performance Dashboard/Main.aspx, Error=The EnableScriptGlobalization property cannot be changed during async postbacks or after the Init event. at System.Web.UI.ScriptManager.set_EnableScriptGlobalization(Boolean
value)
4. I tried to create a new dashboard and this time the performancepoint designer wont launch. After some troubleshooting i see that c2w host file didnot have the caller C:\Program Files\Windows Identity Foundation\v3.5.
I added <add value="WSS_WPG" /> and now it launches
5. Now the Dashboard launches and peruser identity works without having kerberos enabled at IIS. I have all the spn and required delegations setup for this url . But i did not configure at the IIS level
yet.
It looks like lot of things got messed up and reset. Can we upgrade to windows 2012 r2 with a sharepoint application inplace. what is the recommended approach and Whats happening with Performancepoint dashboards. IS there a known issue with sharepoint 2013
sp1.
Raj-Shpt

Thanks for the above article. Few issues are solved . One of the main issue is with Performancepoint Dashboard.
I have all the spn and required delegations setup for this url . But i did not configure at
the IIS level yet. Still per user identity works without having kerberos enabled at IIS.
Raj-Shpt

Graphic Styles - issue with creates style expanding to background when used

I have created a background style to use as a wire frame, and having created it, every time I use it the frame expands to the back ground size?

Thank you Peter and Amebr for your assistance. I ended up using RH Multilevel List Style, configured, and created an identical List Style in Word. I created a Single and a Multilevel (e.g., Level = bullet, Level 2 = squares); their challenge is matching RH indents with Word Indents... It's sort of a bear since RH does not have the Format Paragraph option (ref. drop-down) like Word Lists - Numbering functionality.
After generating my print document mu Bullet style reads "Normal (Web)"; even though the RH CSS Wizard recognized Word List Style I created (Ref. Font: Symbol, Font color: Black, Indent: Left: 0.15", Hanging: 0.25", Outline numbered + Level: 1 +, Numbering Style: Bullet + Aligned at: 0.15" + Indent at: 0.4", Priority: 100, Based on: No List.
Question: Would anyone out there know why is when I highlight my bullet list to verify the correct Style (with the Styles pane open) and I see the "Normal (Web)" [its Style type = Paragraph and Style based on = Normal) is selected? If it came through (from Rh) as a true Multilevel List Style, I should not see anything.
Happy Holidays!
~PM

OBIEE 11g Map View - Issue with Label Translation

Hi All,
I have a strange translation issue with the Maps in 11g.
Created in English language to plot the Revenue for each of the Postal Codes.
I selected Postal Code and Revenue Amount in the Criteria and created a new Map View. It had the text 'Postal Code' in the Map Legend and then the scale for revenue amount.
Now I logged on with Chinese Language , it still appears as 'Postal Code' in English where in it was actually supposed to show it in Chinese.
We have a translation pack to get all the column names translated. If I try creating a new table view, it shows the translated text instead of 'Postal Code', but some how this doesn't work with Maps.
Has anyone faced similar issues ? Is there a workaround for this ?
Thanks for any pointers.

Hi,
I also encounter the same issue. When I view combined layout, I get the No Results message. But when I edit the table layout, I see that there are records returned. Does anyone had any luck in resolving this issue?
Thanks!

Issues With Word Print Dialogue in Leopard

I have run accross an issue with the MS Word 2008 print dialogue. The window is discolored and its contents located in strange locations. This would appear to be an issue with the OS's rendering of the Print window, as it looks like what might happen to a badly written program for system such as Tiger that use the old aqua appearance. Any suggestions regarding this issue would be appreciated.

I don't have Word 2008, but is that the only App that does it?
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Any change on reboot?

OPM 10.4.4 not working with Word 2013 (toolbar will not stay on document)!!!!

I recently upgraded to Microsoft Office 2013 and then was forced to upgrade to OPM 10.4.4 in order for Word 2013 to recognize the OPM Toolbar. The toolbar in the WORD document does not last (or stay) after closing the document. Additionally, the TEXT within the document is not present. If I open the document in Windows explorer, you can see all of the text, but without the OPM toolbar. We have tried everything to get the toolbar onto the word document and to display the contents within the document. OPM must recognize the word document at some base level because it is able to complile and build/run the rulebase. By the way, this occurs within every rule document and every rulebase within WORD 2013. The BI-Pulisher Add-Ins toolbar also had the same problem when trying to add that into Word 2013, but did manage to get it to stay, but it seems limited from the nice presentation that occurs in 2010 Word documents. Basically, I believe Word 2013 has issues with OPM specifically and maybe BI-Publisher.

See OPM 10.4.4 User Guide article Update Oracle Policy Modeling Templates: http://docs.oracle.com/html/E48373_01/toc.htm#Projects and files/Update_OPM_templates.htm
Open the project in OPM, but leave all the rule documents closed. From within OPM 10.4.4, go to Tools > Update Oracle Policy Modeling Templates.
The field "Folder containing documents to update" will usually already display the folder path for the Development folder of the project. If it doesn't, browse to it. If you've got your OPA project in the regular default location, it will be something like this: C:\projects\(your project name)\Development If you've put your OPA project in a different location on your machine, then browse to wherever you put it.
Leave 'Include sub-folders' and 'Update document styles from template' checked. Click Next, Next, etc. until it's done, then 'Finish'.

Bug Report: Original image location sometimes displayed in PDF created with Word 2013

I found a non-critical security bug in Office 2013.
Here is the issue:
If you drag and drop an image into Word 2013 (I'm using x64 version in Windows 7 if that matters) and then save as PDF (using the default settings) it saves the full file path of the original file in the PDF such that the full path name gets displayed when
you hover over the image. I've only tested this in Adobe Reader XI. If you use the Insert Picture method then this does not occur.

I found this posting as I have now "rediscovered" this issue. I came to the same conclusion - edit ALT TEXT for every image.
However, I think it is confusing that these paths of image file are not considered Personal Information that can be removed using the Inspect Document feature (I tried - was not successful). The list of things to be removed using this wizard is quite extensive
- and some of them less visible than these file paths.
It would be interesting to know if this is going to change with future updates of Word. Why is an ALT TEXT included at all per default? I think using the file path in ALT TEXT should be made optional. Is there a way to turn off this default embedding of
the full path?
As the OP I also used Office 2013 on Windows 7 64bit.
Elke

Sleep/wake Issues With Late 2013 Macbook Pro Retina 13"

Dear Apple Community,
I have been recently having issues with the sleep/wake cycle of my laptop. Every time my laptop goes to sleep and I try to wake it up it gets stuck on a blank screen for 3 mins before returning to normal functionality. I have tried deleting the sleep image files and the laptop functions fine for a day and then back to the same issues. I have 3 sleep image files, 2 of them are 1.07gb each and the other one is 64mg. I have deleted them many times and they just come back with the same issues. Any help here would be appreciated. Thank You

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How to center Text Box on Web Page? -- Web dev with Word 2013

I'm trying to assist a user who wants to use Word 2013 for simple web page development.
There are many tools but they want to use Word 2013.
Actually have it working by saving the Word 2013 files as web pages... like index.htm, about.htm, etc.
The problem is when we use the "Insert" tab in Word to create a "Text Box" or a "Shape" ...
And align it centered on the page... it looks fine in Word but when we open it with a web browser the "Text Box" or "shape" are no longeer centered.
We thought we had it fixed by making the "Text Box" Layout Options "In Line with Text" but again... looks fine in Word but not in a web browser.
The question: How can we get a "Text Box" in Word 2013 to appear centered on a web page?
thanks for any help.

Hi:
For webpage design, I would suggest customized form under develop tab on the Ribbon over insert object directly. I tested from my side, using customized form will lock the object position on the
page.

Work Manager Configuration Issue with SharePoint 2013

Hi,
We are facing issue to configure the Workflow Manager with SharePoint 2013.
===========================================================
Please provide any solution/inputs to resolve this issue.
Thanks.

Hi ,
According to your description, my understanding is that you got an error when you configured Workflow Manager for SharePoint 2013.
For resolving your issue, please do as the followings:
1.Start -> Programs -> Workflow Manager 1.0 -> Workflow Manager Configuration -> Remove from Farm (not to be confused with SharePoint “farm”)
2.Drop SQL databases for Workflow Manager. (SbGatewayDatabase, SbManagementDB, SBMessageContainer01, WFInstanceManagementDB, WFManagementDB, WFResourceManagementDB)
3.Start-> Programs-> Workflow Manager 1.0 -> Workflow Manager Configuration -> Configure Workflow Manager with Default Settings (Recommended)
4.Ran the wizard just like before and it should be completed successfully this time.
More information, please refer to the link below:
http://www.spjeff.com/tag/workflow-manager-1-0/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Having problem opening my files and pictures with word 2013

I can not open my files and pictuers with office word 2013 ,everything goes to adobe and it would not allowed me to convert it to office word 2013
You can reach on [email protected] or [email protected]
thanks

Gizmo,
Select one of these files in the Finder, then press Apple-I to open a Getinfo window for it. Use the "Open With..." pull-down menu to choose Preview as the default application, then click the "Apply to All" button.
If Preview is already set as the default application, try choosing another one, clicking the "Apply to All" button, then re-do the whole thing using Preview.
Scott

RH 11 CSS Mapping Styles issue with Word 2013

Similar Messages

Maybe you are looking for