RH 11 hangs when trying to compile parallel projects.

I'm using RH11, HTML Help. Help is compiled in automatic build environment using command prompt. RH hangs when trying to compile parallel projects in different sessions.

Hi Peter,
Thanks for the quick response. Here are a few more information:
We are using RH in a build server environment, not the UI, but the RHCL compiler directly. When RH is invoked, each compiler runs in its own process.
I would assume that command prompt compilation in a build server environment is fairly common in SW engineering.
I should also mention that this process worked perfectly fine with RH9. Since we upgraded to RH11 recently, the build generation process hangs directly after issuing the RH command prompt. The strange thing is that the hang-up occurs frequently, but not all the time. There are no error messages whatsoever that could give us a hint about the reason for this error.
We suspect that Adobe has changed their sign-in process because the process stops at such an early stage.
Any ideas?
Thanks!

Similar Messages

Help - PPro hangs when trying to open a project

The project was working fine earlier today. I haven't changed the drive letters involved, and the autosave files also hang it. I've tried importing the project into a new project, as well as copying the proj file somewhere else, renaming the folder with all the footage in it, and opening that. What happens in all cases is Prem loads and gives me the "recent projects" panel. (My project was in this, but then I did a system restore in case that would fix it, and it hasn't - all that seems to have happens is that Prem has lost its recent history.) I open the project. The progress bar gets to about 75% of the way within a second or two, then hangs. The amount of memory Prem is using doesn't increase in the task manager, CPU usage is nowhere near 100%, etc. I've defragged the disks (they didn't really need it anyway) and the registry (which did need it) and that doesn't seem to have done anything.
I've also tried opening the prproj file in XML Wrench and fixing it for valid XML, but it found no errors. The file itself is only about 4Mb, and not particularly complex - just AVI files and images with scale, position etc keyframes on them.
I just tried importing the project into a new one, but instead of importing all sequences I chose "selected sequences". I got the message "An Adobe Dynamic Link error occurred".
Finally I've just managed to open the project in AE, with no fussing, although all the footage items are missing and when I use Replace Footage, this doesn't seem to do anything!!!!! Ctrl-H, locate the file, click on it - at this point AE would usually find the other 200 or whatever missing items - but it doesn't even find the one I've just clicked on! They're there on the disk, I can preview them from windows explorer.
AAARGH! Anyone got any ideas about anything else I could try, or is this "just one of those things"? Obviously, this has a deadline of, er, tomorrow morning. If I lose it and hurl the whole thing through a window I might post pics, I think they'd be therapeutic.....
Thanks in advance
Nick

Connected the external drive to it, tried to load the project (the ext drive it's on comes up as the M drive, not H, as there's a CD drive on H already which I can't figure out how to get rid of - disabling all CD drives in Device Manager doesn't seem to do it). Predictably this didn't work; it froze as before.I
n the OS of this other machine:
To assign, change, or remove a drive letter
Using the Windows interface
Open Computer Management (Local).
In the console tree, click Disk Management.Where?
Computer Management (Local)
Storage
Disk Management
Right-click a partition, logical drive, or volume, and then click Change Drive Letter and Paths.
Do one of the following:
To assign a drive letter, click Add, click the drive letter you want to use, and then click OK.
To modify a drive letter, click it, click Change, click the drive letter you want to use, and then click OK.
To remove a drive letter, click it, and then click Remove.
Important
Be careful when making drive-letter assignments because many MS-DOS and Windows programs make references to a specific drive letter. For example, the path environment variable shows specific drive letters in conjunction with program names.
Notes
To open Computer Management, click Start, and then click Control Panel. Double-click Administrative Tools, and then double-click Computer Management.
You must be logged on as an administrator or a member of the Administrators group in order to complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from completing this procedure.
A computer can use up to 26 drive letters. Drive letters A and B are reserved for floppy disk drives, but you can assign these letters to removable drives if the computer does not have a floppy disk drive. Hard disk drives in the computer receive letters C through Z, while mapped network drives are assigned drive letters in reverse order (Z through B).
You cannot change the drive letter of the system volume or boot volume.
An error message may appear when you attempt to assign a letter to a volume, CD-ROM drive, or other removable media device, possibly because it is in use by a program in the system. If this happens, close the program accessing the volume or drive, and then click the Change Drive Letter and Paths command again.
Windows 2000 and Windows XP allow the static assignment of drive letters on volumes, partitions, and CD-ROM drives. This means that you permanently assign a drive letter to a specific partition, volume, or CD-ROM drive. When you add a new hard disk to an existing computer system, it will not affect statically assigned drive letters.
You can also mount a local drive at an empty folder on an NTFS volume using a drive path instead of a drive letter. For more information, click Related Topics.
You can re-assign the drive letter for the DVD burners and then assign the appropriate drive letter to match what your Project expects.
I swap machines a lot with Projects, and have each external's drive letter assignment the same on all computers.
Good luck,
Hunt

Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup

Aperture 3.5.1 on OS X 10.9.2 hangs when trying to update the backup. I get the rotating beach ball cursor for hours but not get the confirmation dialog known from 3.4.2 aksing whether I really want to back up.
On old Mac Mini with OS X 10.6.8 and Aperture 3.4.2 there was no such issue.

Creating a new vault and populating it always works but then turning around and updating that vault hangs? The drive is formatted OS X Extended, correct?
That is strange. Before abandoning vaults, they should and do work in 3.5.1, I'd try this
Run a library repair on the library. I always do this now as it seems to cut down and hangs when updating a vault.
Before starting the vault update open the Aperture activity window Aperture->Window->Show Activity.
Now do the update. I can't give you anything specific to look for, just try to get an idea of where the hang is happening (if it happens after the repair).
As for rsync, it should work OK but keep in mind as a lot of the data now in 3.5 is in database files any change to Aperture will result in reync seeing a lot of files has having been changed so I'm not sure now much of a savings that will be over just copying the library. To be honest I've never tried rsync on an Aperture library so this may not be an issue but something to keep in mind. BTW do you have much rsync experience? It can be a bit of a bear to setup if you're not familiar with it.
Another option is to look at one of the cloning programs Carbon Copy Cloner or SuperDuper. They have the ability to make clones and then update only the changes since the last clone operation. In reality, I believe one or both actually use rsyn as the backend but give you a much nicer way to set it up and schedule it.

Acrobat X Pro v 10.1.10 (Mac OS 10.9.3) hangs when trying to save PDF files

Acrobat X Pro v 10.1.10 (Mac OS 10.9.3) hangs when trying to save some PDF files, after opening or after commenting. Applies for any of the Save options. "Watch" then "spinning beach ball" appear and application is indicated as "not responding." Mac OS Preview has no problem with the same files. Files can be displayed with Acrobat, just not saved. I would prefer to use Acrobat's commenting tools to mark up the document.

"Mac Office 2008"? You must mean Microsoft Office 2008. Try posting in the Microsoft forums here:
http://www.officeformac.com/productforums/

Error when trying to compile HTML help

I'm using RoboHelp 7.0 on Windows XP. All of the sudden, last
week, I start getting the following error when I try to compile
"Fatal Error: Unexpected error from Microsoft HTML compiler." I've
read the other posts regarding this error and deleted the .CPD file
multiple times and tried to compile again still with no success.
I've uninstalled and reinstalled multiple times and not had any
better results. The other author in my office can check the project
out of RoboSource and compile it fine. I have it on my local drive
when trying to compile.
I'd appreciate any ideas. It doesn't make sense that is
something in the project since my other author can compile it fine.
Thanks,
Nita

Hi, Nita,
Do you have any other RoboHelp projects that you can try
compiling? This may help to determine whether there's something
slightly askew about this particular project — sounds
unlikely if your colleague can compile without error — or
whether the problem lies in your RoboHelp installation.
I'd also recommend that you run MJ's Help Diagnostics,
available from the address below. This will verify that all the
HTML Help viewer and compiler components are properly installed and
registered on your machine.
http://helpware.net/downloads/index.htm#MJs
Pete

Why is Lightroom 5 hanging when trying to export images?

Why is Lightroom 5 hanging when trying to export images?

I've been having the same issues, mainly with videos. Any resolution to your issue yet?

Lenovo Vibe X2 keeps hanging when trying to pullup the contacts or when opening the SMS function !

Have been using the Vibe X2 since 2 months. Phone keeps hanging when trying to pullup the contacts or when opening the SMS function. Terribly dissatisfied with the functioning.
*Moderator note:Message edited for a better understanding of the problem/ compliance with the Lenovo Community Participation Rules

Solved, I found the option there:
Contacts - local menu - More features and settings - More display options - Matching digits of number - 7 digits
Works great now,
Regards,

My G3 is Hanging when trying to load Tiger

My G3 is hanging when trying to load up tiger. It gets all the way up the progress bar and doesn't go any further? Any suggestions? Can I just erase my hard drive and start over. It's a computer that I'm trying to upgrade for my kids so there is really nothing important on the hard drive at this point. I can't even get to disk utility to do this.

Does your computer meet the minimum system requirements for Tiger? [Mac OS X 10.4 Tiger system requirements|http://docs.info.apple.com/article.html?artnum=301341] Note, these really are minimum and Tiger will run a lot better with more, especially RAM. Tiger on a 300MHz will probably be quite slow.
Some B&W G3s do not respond well to larger drives and the best terms is "flaky". These are the Rev. 1 G3s. You can post in the G3 forum for more information about this. See Grant's comments in [this discussion|http://discussions.apple.com/thread.jspa?messageID=7203272&#7203272]
The firmware should have been updated on your computer before any OSX install but I'd make sure just in case [Mac OS X: Available firmware updates for upgrading from OS9 to OSX|http://docs.info.apple.com/article.html?artnum=86117]

Dreamweaver CS6 hangs when trying to access SFTP site (Mac)

Dreamweaver CS6 hangs when trying to access an SFTP site - or at least I think that SFTP could be the reason.
Beachball forever....
It works fine when trying to access other sites.
The one addity is that when I go into "Manage Sites" and test it, it connects fine.
I am running OSX 10.8.2. I upgraded from 10.7 to see if this problem would go away.
Message was edited by: deeed (typo)

When CS6 first released, some people experienced problems with the FTP feature. A critical update was released which addressed these issues. Did you install it?
http://www.adobe.com/support/dreamweaver/downloads_updaters.html
Nancy O.

Illustrator CS4 hangs when trying to map art on 3D object

Hi, does anyone have a solution for this problem:
Illustrator CS4 hangs when trying to map art on 3D object
The rendering dialog box comes up and never goes away. I have to force a quit.
I'm on a Mac OS 10.6.6
I've got AI CS4
Any ideas?
Thanks,
Linda

This may not be exactly what you are looking for but another user experienced a crash:
http://forums.adobe.com/message/3162350
Scroll down to JETalmage's post and see if you are doing anything which he describes as being a potential cause for AI to stop responding.
Also, as in the link I provided, try to give more details about your scenario so we can see if the problem can be replicated.

Lookout 6.1 crashing when trying to compile .lks file

When trying to compile my .lks file in Lookout 6.1, Lookout crashes. From the event viewer I get the following information on the crash:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date:  10/16/2007
Time:  1:19:38 PM
User:  N/A
Computer: SCADA-PE-1
Description:
Faulting application cbl.exe, version 6.1.0.27, faulting module lkworks.dll, version 6.1.0.27, fault address 0x000e7377.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 63 62 6c   ure cbl
0018: 2e 65 78 65 20 36 2e 31   .exe 6.1
0020: 2e 30 2e 32 37 20 69 6e   .0.27 in
0028: 20 6c 6b 77 6f 72 6b 73    lkworks
0030: 2e 64 6c 6c 20 36 2e 31   .dll 6.1
0038: 2e 30 2e 32 37 20 61 74   .0.27 at
0040: 20 6f 66 66 73 65 74 20    offset
0048: 30 30 30 65 37 33 37 37   000e7377
0050: 0d 0a                     ..
Any assistance on correcting this problem would be GREATLY appreciated, since I will lose a bunch of work I have completed working with the l4p file.
Computer Info: Windows XP SP2 OS, Dell Optiplex GX745, 2.66GHz, 2GB RAM, Dual Core Processor
Thanks!
Jason Phillips

Geoff,
Go into your Lookout folder and look for the file "cbl.err". Open that file in notepad or wordpad and you should see where your errors are that are preventing your file from compiling.
I got so used to Lookout generating the errors when a compile failed and displaying them immediately that I forgot about checking this file.
Good luck!
Jason Phillips

Itunes hangs when trying to uncheck encryption for iphone backup.

Itunes hangs when trying to uncheck encryption for iPhone backup. The iTunes software becomes unusable and unresponsive after entering correct password (only set up today) All i want to do is backup my iPhone before trying update to the latest ios. I have tried uninstalling all Apple software and re-installing, all unsuccessfully - still have the same problem! Essentially i have to use ctr+alt+del to even close the iTunes program, so I'm assuming there must be some sort of corruption with the encryption / password setup - neither of which have been used at all, all previous backups are on iCloud and don't have encryption. I obviously don't want to attempt a backup with these sort of issues occurring as i don't think i could trust it. Can anyone suggest a way to fix the problem, Ive tried googling all afternoon without any success - most answers I can find relate to people who have lost their passwords but don't have the software issues i am having.

Further to the issue - i thought I'd try and run an encrypted backup for fun (since that's the only option available atm) and the backup hangs as well - in fact it doesn't even technically start other than saying its backing up. The progress bar never moves at all?

Macbook (black) first edition hangs when trying to read Serial-ATA

My Macbook recently died on me. In thinking it was my hard disc I have installed a new one. It did find it briefly when trying to install Snow Leopard again this failed since it could not communicate with the hard disc. Now I am stuck, using the System Profiler it just hangs when trying to read the Serial-ATA device tree.
Any idea of what is wrong and if it is worth repairing it?
with kind regards,
Christian

Turns out that the brand new Seagate that I got was faulty. Have now installed yet another drive and this seems to have done the trick.

Dreamweaver CS6 hangs when trying to close it. (iMac, Yosemite). I have removed the configuration folder but it doesn't help. What to do next?

Dreamweaver CS6 hangs when trying to close it. (iMac, Yosemite). I have removed the configuration folder but it doesn't help. What to do next?

OS X Yosemite: If an app freezes or quits unexpectedly
Nancy O.

LabView hangs when trying to load the same VI with a different user logged onto Win2k

When 'User A' is logged onto Win2k, a particular VI loads and runs fine. When 'User B' logs onto the same Win2k box, LabView hangs when trying to load the VI.
I'm also not seeing the setup channels in the Data Neighborhood in MAX when logged on as 'User B'. I tried loading the configuration when logged on as 'User B' that I think is being used for 'User A', but nothing happens.
Where are the configuration files (of whatever type) that tell LabView which user is logged on?
Thank you!

There are no configuration files that tells LabVIEW what users are logged on. It is Win2K permissions settings that allow different users access to different folders and applications. Try changing the permissions for the LabVIEW folder and see if that doesn't fix your problem.

RH 11 hangs when trying to compile parallel projects.

Similar Messages

Maybe you are looking for