RH 7 WEB Help: Hyperlink to external file will not activate file

I have added an external file (Excel spreadsheet document) to my RH 7 WEB Help.
* The Excel file is located in the Project Manager
* The hyperlink contains the correct file name
* The generated WEB Help folder contains the Excel file
However, when I test the external file link, the external (Excel) file does not open.
Suggestions?
Thanks,
Jerry Christensen
St. Paul, Minnesota

Hi there
LIkely Mark Of The Web (MOTW) is nailing you. When you test locally and have MOTW enabled, links to things like Excel, Word and PDF don't work.
The first step is to turn off MOTW. You do that by right-clicking the WebHelp layout and choosing Properties. The option for MOTW is in the first dialog.
Once that is done things should be mostly good. I say "mostly", as you will now probably see the yellow information bar in IE when you test. To prevent seeing that, you need to change the settings in IE.
To change the settings in IE:
Click Start > Run type inetcpl.cpl and press Enter
Click the Advanced tab
Scroll to the Security section
Place a check mark in the option "Allow active content to run in files on My Computer"
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Similar Messages

HT3275 Is it possible to delete older backups manually? I have tried and the files will not delete (Files remain in trash when emptied)

Is it possible to delete older backups manually? I have tried and the files will not delete (Files remain in trash when emptied)
I am Backing up to a Lacie HD 1tb.
I also use the drive to store Current work on as well as my Time Machine Backup.
Thanks!

Read the following link to get a clearer idea on how to approach trash problems.
Solving Trash Problems and this is a link to download Trash it.
Download Trash It! for Mac

FCP Files Will Not Open (File Error: Wrong Type)

I have put together a few pieces using FCP and then unfortunately my LaCie HD got wiped. I was however able to recover all of my files (thank God) but when I go to open any previous FCP files, I get the error message "File Error: Wrong Type" once FCP is opened. I am wondering if there is any way to open these files somehow so I don't lose my work. Thank you.

If they'll open in QuickTime, you could re export them, and thus rebuild them that way.
Otherwise... recapture them. I'm not sure they couldn't be fixed, but more than likely the recovery process messed up the resource forks of these files. Might search in the QuickTime forum here for a fix for that??
Jerry

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

Adobe reader X will not open files on the web

Adobe reader X will not open files on the web. It works fine on off-line files.

Hello Ray,
Please try following steps:
1. Run the installed Adobe Reader X.
2. Click on Edit in the menu bar.
3. Then click on Preferences in the drop down menu list.
4. Click on the Internet category on the left pane.
5. Now, make sure that Display PDF in Browser option is checked.
If above steps doesn't work then let me know which Browser you are using, may be we have to do some settings there.

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

You're welcome! It's usually CS5 and below that has the ACR update problems.
What counts is that you are back in business.
Gene

HT3775 quick player will not open file M2U00110.mpg please help

quick player will not open file M2U00110.mpg please help

The easiest solution is probably to use VLC. It can play just about anything.
However, Perian will help Quicktime play various formats.
Flip4Mac will help Quicktime play Windows Media files.

New Keynote will not save files to our local network.. help?!

The new version of Keynote will not save files to our local network at work and keeps telling me I don't have permission to save on our network. I can save to my desktop no problem. I am working on Mavericks and the latest edition of Keynote.
I have permission to acess all files and it doesnt happen with any other programmes im working in.
Any ideas?! It's driving my crazy.
Thanks

This discussion forum deals with Final Cut Pro, Apple's editing application for video.
Try posting in the MacBook area:
http://discussions.apple.com/forum.jspa?forumID=1167

Photoshop CS6 - Batch function will not save files

OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original). I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
Attempt #1:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
NO checkmarks next to any options
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #1 - DID NOT SAVE FILES
Attempt #2:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Cehckmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #2 - DID NOT SAVE FILES
Attempt #3:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #3- DID NOT SAVE FILES
Attempt #4:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #4- DID NOT SAVE FILES
Attempt #5:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
       Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #5- DID NOT SAVE FILES
Please help! This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save. I have several hundred files that I need to run this on, so doing it individually is not an option.
Thanks in advance for any and all insights!

I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
~CG
UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

Adobe Acrobat 11 will not open files in IE 10.0.06

Adobe Acrobat 11 will not open files in IE 10.0.06. Problem started about 2 months ago. It can open older files on computer but cannot open or downloadd any from internet. Using Office 2010. Already spent an hour with my computer tech support under warranty. Please help identify issue. Thanks

As a web designer - IMHO, Internet Exploder is absolute garbage disguised as software. This (and thousands of other threads in this and many other forums throughout the web) is just more proof of that. I've used Firefox since 2002 when it was still called Mozilla. It does about a million things IE can't and won't, and does them better, faster, and more sensibly.
Microsoft KNOWS that most corporate workstations have Windows and most I/T departments forbid installation of unapporved software, including browsers, so (by a very slim margin) IE is still the most used browser in the world, but... that doesn't by any means make it the best choice. Because they know so many people are literally FORCED to use it at work, they will not make it more functional than they absolutely have to, because they don't care if people like it or not, when they have no other choice.
On a home computer, it's different, and that's why Firefox is just a fraction of a percentage point behind IE in worldwide use, and thanks to iPhones, Safari is rapidly climbing the numbers too.
Rather than trying to work around something that even Microsoft won't bother to fix, abandon their junk and go with Firefox, Opera, Chrome or Safari. It won't be long till you're glad you did.

My InDesign file will not open! URGENT!

Hi all,
One of my InDesign files will not open, when I attempt to open it, I get a message saying "Cannot open file, Adobe may not support the file format, a plug-in that supports the format may be missing or the file may be open in another application." I'm not exactly sure what the issue is as I opened another one of my files previously and that one is still working fine. I'm using Windows 7, if anyone can help me I would really appreciate it.

Right-click the file and choose Open With, then notepad, and post a screen capture of the first dozen or so lines of text.
You can embed an image in a post using the coamra icon onthe web page, like this:

Pdf files will not open

Hi,
I have viewed through this forum and did not find a problem with similar symptoms.
I upgraded from Adobe Reader 8 to Reader 9 and then the .pdf files will not open.
Actions and Observations/Symptoms:
1) After I clicked onto the pdf document icon - nothing happens.
2) I right click onto the pdf icon and chose "open with Adobe 9" and get the same response. Nothing happens.
3) I go to the the start menu - select Adobe Reader 9 - and the program does not even open.
=======
I have since removed Reader 9 and re-installed Reader 8. I tried the above actions and got the same behaviour. Not a whole lot happens. It seems like something is broken after the first initial upgrade.
In fact - I went to the folder:
C:\Program Files\Adobe\Reader 8.0\Reader and
tried to open Reader by double clicking onto "AcroRd32.exe" and there was no response.
I'm completely lost! Can anyone share a fix to my problem?
Thanks,
Mike
Some hardware & OS background info: Toshiba Laptop - 1.58 Ghz, 3GB RAM - M/S Windows XP Professional Version 2002 Service Pack 3

I can't explain the cause to the problem - but I found two "work-arounds" to get me running again.
Workaround #1:
I found another program (and there are many) on the web that will also read .pdf files. I downloaded "Foxit Reader" , installed it and it works. I can now view my pdf docs!
However - I got so used to Adobe Reader - I really wanted to get Reader working again.
Workaround #2:
I re-installed Adobe Reader 8.
Instead of running the usual Adobe installation script that I got from the web, I copied (from another PC's C-drive) the "Reader 8.0" folder and all its contents into my current C- drive directory structure C:\Program Files\Adobe\.
I re-booted the PC and can now open my pdf files using Reader 8.
It seems to work - but I don't know what the effects of this installation method will have in the future - or the interaction it will have with other programs. I guess when I need to remove the program in the future - I'll have to do it manually, since it doesn't even register in the "Add or Remove Programs" under Control Panel.
===============
Hope this helps out anyone else with similar symptoms.
In the original problem, it's unfortunate that there were no error messages whatsoever when I tried opening the pdf files. It was like as if Reader was not even activated or even loaded on my PC. I'll bug me for a while - but at least I got Reader working again (for now....)!
Mike

Clickbox will not open file after published

Good morning,
I am working on a project where we are quizzing users. They must refer to a PDF docuemnt as part of the decision making process. I have added a click box that allows users to click to open the PDF docuement. Of course, when I publish it, I get the warning to make sure the files are exported. So, I copy and paste the two files into the output folder and uploaded it to my personal sharepoint site to test. Of course when I try to run it in a web environment, the file will not open. I cannot figure out what else I need to do to get these files to open after publishing. The Help file is worthless around this and I did some searches and have not found anything on the expert boards from Rod or Lilly. I am kinda at a loss. I could upload the files to our LMS and just point to the UR but I don't like that when the location changes.
Any thoughts?
Eric

What was the format of the link to the PDF that you used in your Captivate file?

RH 7 WEB Help: Hyperlink to external file will not activate file

Similar Messages

Maybe you are looking for