RH 8 crashes on Save All when copying content between two open projects

[Win XP SP2] I've submitted a bug report for this issue. Note that RH does seem to save the content as it's dying (a very noble act, I must say), but the behavior is bothersome.
******BUG******
With two instances of RH8 running (dual monitors), and copying content from one project to another, the instance receiving the added content crashes when you click Save All.
Steps:
1. Open RH 1
2. Open RH 2
3. Copy content in RH 2 and paste it into RH 1
4. In RH 1, click Save All
Results: RH 1 crashes (RH 2 does not)
Expected Result: RH 1 does not crash

I would try another one with each of these documents.
Create a new document with 2 pages.
Name the master pages so, that their names are not conflicting with neither of these 2 document’s masters.
Delete every style in that empty document, also any swatch
No drag the pages of the first document into such an empty document.
Do the same step 1 to 4 with the second document in a NEW empty document.
Now you have 2 new documents. Take care that no conflicting master names appear.
In each of these documents create in each style panel a folder and drag all used styles in that folder.
Save both documents
Try again to insert the pages of both documents.
Otherwise, it this does not work out, could you send me via private message the files or a link. I would check it with a Debugging Version of InDesign (InDesign DEV) I can use to find errors.

Similar Messages

'Finder wants to make changes' when copying files between two Macs

Hey all,
I've read a few versions of this problem on the forums here but haven't tracked down a solution.
I have two Macs on the same network – I recently got a second-hand Mac Pro, and my Macbook Air. The computers are both on the network and can browse their respective folders and the like, but when I go to copy or sync files between the computers, I get a file permission issue.
Finder on either computer prompts: 'Finder wants to make changes. Enter your password'. At the same time a corrupted version of the file copies to the other computer but with 0 bytes that doesn't open...
Has anyone solved this issue before – it'd be greatly appreciated to hear any approaches!

On the laptop I got 513
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How can I remove all content between two tags using Find/Replace regular expressions?

This one is driving me bonkers... I'm relatively new to regular expressions, but I'm trying to get Dreamweaver to remove all content between two tags in an XML document. For example, let's say I have the following XML:
<custom>
<![CDATA[Some text
Some more text]]>
</custom>
I'd like to do a Find/Replace that produces:
<custom>
</custom>
In essence, I'd like to strip all of the content between two tags. Ideally, I'd like to know how to strip the CDATA content as well, to return the following:
<custom>
<![CDATA[]]>
</custom>
I'd much appreciate any suggestions on accomplishing this.
Many thanks!

Thanks much for your response. I found David's article to be a little thin with respect to examples using quantifiers in coordination with the wildcard metacharacters; however, I was able to cobble together a working expression through trial and error using the information he presented. For posterity, here’s the solution:
Find:
<custom>[\d\D]*?</custom>
Replace:
<custom>
<![CDATA[]]>
</custom>
I believe this literally translates to:
[] = find anything in this range/character class
\d = find any digit character (i.e. any number)
\D = find any non-digit character (i.e. anything except numbers)
*? = match zero or more times, but as few times as possible (i.e. match multiple characters per instance, but only match one instance at a time, or none at all)
I’m still not sure how to effectively utilize the . wildcard. For example, the following expression will not find content that ends with a number:
<custom>.*?[\D]*?</ custom >
I'm presuming this is because numbers aren't included in the \D metacharacter; however, shouldn't numbers be picked up by the .*? expression?

Hello there. My appstore app doesn't work at all when i am trying to open it ,it closes again. Thanks! iMac, Mac OS X (10.9.4)

Hello there. My appstore app doesn't work at all when i am trying to open it ,it closes again. Thanks! iMac, Mac OS X (10.9.4)

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Permissions problem copying files between two Macs

I've run into a strange problem when trying to copy files between two networked Macs. Some background facts: We have two Macs at home each with three accounts. Two of the accounts are regular user accounts (my wife's and mine, call them "K" and "B" for short) and the third is an administrator account (we'll call it "A"). I have a .Mac account, which I use to sync between the two Macs. The other accounts do not. The user accounts B & K were initially set up on the second Mac via the Migration Assistant, copying over files and settings. The administrator account was not.
The problem I've run into is that if I am logged in as either user B or K on the local Mac, connect to the remote Mac as the corresponding user, and try to copy files into a folder owned by that same user on the remote Mac, I get a series of three dialog boxes with error messages:
1) "You may need to enter the name and password for an administrator on this computer to change the item named ..." (stop/continue)
2) "The item ... contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" (stop/continue)
3) "The operation cannot be completed because you do not have sufficient privileges for some of the items."
If I go all the way through this hitting continue / OK on each, what shows up on the remote computer at the end is an empty file with the name and filetype of the local file that I was trying to copy, but of zero length.
This only happens when I'm copying from (local.B -> remote.B) or (local.K -> remote.K). It does not happen if I try any of the other pairwise combinations (assuming that I've authenticated properly): (local.B -> remote.K or remote.A), (local.K -> remote.B or remote.A), (local.A -> remote.B, remote.K or remote.A). It happens regardless of which Mac is local and which is remote.
I'm a little baffled. I've tried to search for this on Apple Discussions and other forums, but either haven't been using the right keywords or am coming up blank.
Anyone have any suggestions?
Thanks,
Bob

borbye is correct that this will remedy the problem but there is a way to do it and have your account work. after changing the user UID and group UID to 501 you will have to restart. then when you log on your home folder will still be your default but you will not have any access. Since you are still an admin you can change that. right click on the home folder and select get info click arrow for sharing and permissions. Your old UID account will show up as _unknown delete this user and add your user to it giving yourself read and write privilege. click on the cog on the bottom and select apply to enclosed items. A warning box will appear stating that this process cannot be undone do you wish to proceed? click yes and a status bar will come up. once the bar is gone the process is complete. since you didn't have access to your home folder you cannot save your settings, this is a good thing since your account will not look remotely the same as yours most likely. all you have to do now is logout and then back in. Your account will look as it did before the change with all the access settings and so forth as before the change... minus some permissions due to the overwrite. It's a minor repair to the permissions to some shares considering you will be able to now move files to and these shares without the permissions alert that only creates a 4kb file instead of the real thing. Takes 5 minutes at most. Have fun.

Different ways to copy data between two schemas in one instance

Hi there,
I am searching a good way to copy data between two schemas in the same instance.
Both schemas have an identical structure such as triggers, tables, views and so on. The only difference is the purpose: one is the productivity system and one is for development.
I looked at datapump but I do not explicit want to export / import. I want to keep the data in the productivity schema as well as copy it to the other schema. Any ideas? I found out there is a copy statement but I dont't know how that works.
Thank you so far,
Jörn

Thank you for your replies!
I also thought of creating a second instance for development and move the dev - schema to it. I just don't know whether our server can handle both (performance?). Anyway the idea is to have a possibility to quickly rebuild the data inside a schema without indixes or triggers, just pure data. I thought the easiest way would be to copy the data between the schemas as they are exactly the same. However if you tell me DataPunp is the best solution i won't deny using it :).
When you export data a file is created. does that also mean that the exported data is deleted inside the schema?
best regards
Jörn
Ps: Guido, you are following me, aren' t you? ;-)

CS5.5 illustrator crash on save all the time

Any solutions for why CS5.5 illustrator crashes on save - event log indicates agm.dll faulting module?
Any patches available?
It was working fine - since installation over a year ago.

You will have to provide exact system information and crash details as well as explian what exactly you are doing, what your files contain and so on.
Working with your Operating System’s Tools
Mylenium

Firefox should save session when only popup windows is open

When I have some window with multiple tabs open and I click close button on top, it saves the session and quits. Thats ok. But when there is some hidden popup window open (or source code) it destroys the session and leaves the popup open!!!! So the menu is gone and you lose your session. When i restart FF tabs are gone. So it should save session when only some popup windows are open.
Also it should ask what to do when i click close window, when it's unclear what to do

It is always a good idea to close a Firefox session by clicking File > Exit or Firefox button > Exit for proper shutdown.
Those pop-up windows are produced by JavaScript. JavaScript can disable certain features in the pop-up window. You can set some preferences using '''about:config''' so that those features are not disabled in the pop-up window. See:
*How to use '''about:config''': http://kb.mozillazine.org/About:config
#type '''''about:config''''' in the URL/Location bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''dom. disable_window_open_feature.'''
#reset preferences you want to '''''false''''' by double-clicking on that preference in the lower panel on the '''about:config''' tab
#Preferences you can reset in this case: http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape "9.4.3"
*Shockwave Flash 10.2 r159
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Firefox crashes for no reason when there is a tab open for MSN.

I use MSN as the first tab on my browser. I can open the browser and work on multiple tabs. But when I leave the browser open for several hours, it's started to crash. I've checked each of my tabs and the only time it crashes is when there is a tab for MSN open. In fact, I closed all the tabs except MSN and the browser crashed.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Why does my screen blank and need to be refreshed when I switch between multiple open tabs and is there a fix to this?

If I have one tab open at a site, and then open a new tab to a different website, when I click back on my other tab the screen is a blank gray color and I have to refresh it to get the site back. This happens almost every time I switch between my open tabs, no matter which tab I am going back to. I am not having this problem in any other browsers. This has only started happening in the last couple of months and it has gotten really annoying. Does anyone know how I can stop this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. 
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions. 
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Copy RPD between two environments

Hi,
Can anyone help with the process of copying an RPD between two environments (e.g. development to production).
Thanks

See this link
http://www.rittmanmead.com/2008/04/28/migration-obiee-projects-between-dev-and-prod-environments/
Make sure that you have all TNS entries in TNSNames.ora file in new environment.Match the database details given in connection pool to TNS entries whether they are pointing to correct database.
I hope RPD structure is same in both the environments ie users,groups are same.
Regards,
Sandeep
Edited by: Sandeep Saini on 24-Nov-2010 08:56

Copy Files Between Two Unix Computers

Hi,
I am trying to write a piece of code that will copy bunch of files from one Unix computer on to another Unix computer. On windows it seems to be pretty straight but on Unix I am trying to understand best way of copying the files. I don't have much expertise in Unix.
Is using FTP the only option for Unix?
I am not able to create a FILE object by referring to a file on some other Unix box? I tried new File("//unixbox2/temp/123.txt");
Please let me know the different ways to copy files between Unix computers.
Thanks
Gautham

This's a simple example of how you can send a file form one computer to another
import java.io.*;
import java.net.*;
public class Prf extends Thread {
     public void run() { //Read form file and writer to socket
          try {
               Thread.sleep(100);//sleep(100) while server is getting ready to accept connection
               System.out.println("Connecting...");
               Socket soc = new Socket("localhost",4070);
               OutputStream outS = soc.getOutputStream();
               FileInputStream fis = new FileInputStream("input.dat");
               int i = 0;
               byte[] b = new byte[1000000]; //1MB buffer
               for(;;) {
                    i = fis.read(b); //read from file (i - number of read bytes)
                    if (i != -1) {// checking for end of data
                         outS.write(b,0,i); //write portion (0..i) of bytes to socket
                    } else {
                         break;
               fis.close();
               outS.close();
               soc.close();
          } catch (IOException e) {
               System.out.println(e.getMessage());
          } catch (InterruptedException e) {
               System.out.println(e.getMessage());
     public static void main(String[] args) {//Read from socket and write to file
          Prf prf = new Prf();
          try {
               ServerSocket sSoc = new ServerSocket(4070);
               prf.start(); //start writer
               Socket soc = sSoc.accept();
               System.out.println("Connection's accepted");
               InputStream inS = soc.getInputStream();
               FileOutputStream fos = new FileOutputStream("output.dat");
               int i = 0;
               byte [] b = new byte[1000000]; //buffer
               while (true) {
                    i = inS.read(b);//read from socket (i - number of read bytes)
                    if (i != -1) { //check for end of date
                         fos.write(b,0,i); //write portion (0..i) of bytes to file
                    } else {
                         break;
               fos.close();
               inS.close();
               soc.close();
               sSoc.close();
          } catch (IOException e) {
               System.out.println(e.getMessage());
}

Indesign CS6 crashes when copying pages between documents

I have two documents and I want to copy 28 pages from one to the other. Indesign crashes on any form of attempt. What I tried so far:
1. Copy pages per drag and drop, ID would then ask where to insert, I selected "at the end". Crash.
2. Save both documents as IDML, then opened the IDMLs, saved as INDD (to erase possible document structure corruptions), closed and opened both INDDs again, then drag and drop. Crash.
3. Selected the 28 pages from the source document, selected "Insert pages" from mini menu of pages panel, then set what pages to use, where to put ("At the end") and target (the other document). Crash
4. Tried both, "Insert pages" and drag 'n drop, with different target position "At the beginning". Crash.
5. Saved a copy of the source document, reduced it to contain only those 29 pages I want to copy, then drag and drop to target. Crash.
6. Tried vice versa, means copy all target document's pages to the source document. Crash.
Any idea how I can get the pages over to the target? There is unfortunately no "Append pages from file" in the mini menu.
TIA!

I would try another one with each of these documents.
Create a new document with 2 pages.
Name the master pages so, that their names are not conflicting with neither of these 2 document’s masters.
Delete every style in that empty document, also any swatch
No drag the pages of the first document into such an empty document.
Do the same step 1 to 4 with the second document in a NEW empty document.
Now you have 2 new documents. Take care that no conflicting master names appear.
In each of these documents create in each style panel a folder and drag all used styles in that folder.
Save both documents
Try again to insert the pages of both documents.
Otherwise, it this does not work out, could you send me via private message the files or a link. I would check it with a Debugging Version of InDesign (InDesign DEV) I can use to find errors.

Getting An error has occured on the script of this page when copying content from SharePoint to Excel

Hi,
We have a SharePoint site where we use Windows Authentication for the base site and Forms based authentication for the extended site.
In the extended site certian portion of the site is having an anonymous access and certian part of the site reqires credentials to see the content.
When i try to copy the content from base site with Windows authentication to excel sheet it is prompting for the credentials and on providing the credentials content is getting copied.
But When i try to copy the content from the extended site either from the anonymous access pages or the pages which are shown after authentication in both the cases we are getting the below error.
On the error if i click on yes it is going to Login page of the site even for the pages with anonymous access as well as pages what we see after authentication.
Is there any way to avoid prompting for the windows credentials in case of Base site and avoid this error in the case of extended forms authentication site, as i am just copying the plain text from site to excel.
please help
Thanks,
Neela Krishna.

Hi Inderjeet.
Thanks for the reply I guess we could not get the fiddler trace as we are getting this error while i am copying the data to excel file which is present on drive from SharePoint this is not on a browser. Correct me if I am wrong
And Alternate access mappings and IIS bindings are perfect.
Thanks,
Neela Krishna.

Error Message when copying text between sequences

I hadn't had this issue until updating to the most recent version of FCP. Basically, I am trying to copy text from one segment to another. The text has edge wipe transitions at their heads and tails. I get a message that says 'This edit cannot be done because a transition would be cut or an item to one side of a transition would become too short.' I don't see why this would be the case since I am copying the entire file, including the transitions and I am pasting it on a place in the sequence where nothing could affect the length. I'd be really interested to hear if anyone has ideas on how to overcome this. Thanks.

I get this too...oddly. Copy the text WITHOUT the transitions on the head and tail, then add them later.
Shane

RH 8 crashes on Save All when copying content between two open projects

Similar Messages

Maybe you are looking for