RH_INSERT_INFTY in update mode not working properly

I am calling the FM RH_INSERT_INFTY using IN UPDATE TASK in my Inbound part of my IDOC.
The IDOC is getting generated successfully in the Outbound part but getting errorred out in the Inbound side.
I have checked for the attributes of the FM where the type of FM is NORMAL FUNCTION MODULE.
any pointers on this will be of immense help to me.

This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

Similar Messages

LSMW in background mode not working properly

Hi,
I am doing LSMW in background mode. But I am facing problem in SM35. The session is ended with sessions.
Wt I am trying to do here is: I have 4 fields on the screen in which 4 th field is non-editable field.
I am concatenating first 3 fields and storing in 4th field and storing in a table.
In the foreground ..I have no problems. LSMW is working properly and there no logs in SM35.
But however if i run the session in background, It is showing as 4th field is not a input field.
Thanks

This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

Adobe desktop app updater is not working properly

Trying to update adobe desktop app but its giving me this popup
accept button ( which is in right side) is not working. When I press cancle button (left side button) getting another popup
I have no idea what to do...!!

Well... that says that you must use an ADMINISTRATOR computer account, not a simple user account
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may help

IOS 6 update = Speaker not working properly

My speaker was fine and I have no reason to believe there are any hardware issues. As soon as I updated my iOS 5.1.1 to the new iOS 6 it stopped working and now I can't listen to music or watch videos on my iPhone unless I insert a headphone!
What's happened and how can this be resolved?

Experiencing similar problems with both me and my wife's iPhone 4S's. My phone's speaker was muffled until I played a song, then it seemed to work ok. My wife's will not work at all except for when you adjust sound settings (e.g. changing the alert sound). Then it works only during the "test" and reverts back to its broken state.
P.S. And yes, I've rebooted both numerous times. This has no obvious affect.

After new update keypad not working properly..slow have to wait for letters to fill in. Any thoughts

After downloading new OS key pad not functioning
Properly. Type in message and it takes several seconds to populate.
Anyone else having same problem or solution?

There are many other posts here on the forum about this same issue...use the SEARCH feature and I'm sure you'll locate your answer.

Update Installation not working properly.

I had to send my lenovo back to get fixed 1 month ago.
I get it back and adobe reader wants to install an update automatically
It doesn't even give me a choice, which pisses me off.
The reader program then decides to restart, automatically. It went through step 1, then on step 2 of 7 it STOPPED installing.
It just STALLED and has been "stuck" on 2 of 7 for 2 hours now.
I WILL be forced to turn off my machine.
WHY the hell did this happen? If it screws up my OS Adobe needs to fix it.
Oh and I've been waiting on hold for your tech support for over an hour and a half now. The wait time was supposedly 30 minutes.
I'm pissed.

It would seem like the Windows Updates are being installed on your machine. Step 1/2/...7 of 7 wqoudl indicate that Windows Update are bineg installed cause non of the Adobe Reader Updates display information in that fashion.
Also, can you please recheck the setting indicated in the Updater Preferences to see what is the Update Mode set on your system for the Reader application. You can check the same by clicking on Edit > Preferences > Updater.

Yosemite 10.10.2 Update - Trackpad Not Working Properly

MBP OSX Yosemite 10.10.2
The following trackpad gestures no longer working since latest update - four finger mission control, app expose, launchpad, show desktop, two finger scroll in safari (although works in chrome).
The same symptoms on BT trackpad as on the internal trackpad.
All basic troubleshooting tried - reboot, turned all the gestures off and reboot etc etc
Please help

Go step by step and test.
1. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
2. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
3. Reset PRAM:   http://support.apple.com/kb/PH14222
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk    Section: "Try Disk Utility" Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

Photoshop after Latest CC updates is not working properly.

I just installed CC Photoshop's latest update and now I'm totally out of commision. Unable to work with any of my previous 3d projects. They appear to load, but as soon as you select any object, it falls apart. Objects go flat and rearrannged. When createing new objects, such as 3D extrusion fonts, they are flat. Cannot distinquich the front from the sides. There are no shadows. When you click an object, the background dissappears. When you try to move an object, it stutters and takes several seconds before the object moves. In regular Photoshop when editing a previous projectl, for example, when setting a paint brush on a given area, an error message pops up says "Could not use the brush tool because the current time is outside the range for the target layer. "Time"??? What is going on. Does anyone know if I can uninstall and revert back to a previous project. I've got work to do. This is devesating!! The list goes on. When trying to create a depth map from a plane object, you'll get an unknown error and cannot get out of it unless you kill it from the Task Manager. Please help!

I would think you would first check to see if your video card has driver updates. Check the card maker's website to be very sure. Upgrade to the most current.
If doing that does not fix it, then try this:
Dial back your GPU settings (Preferences > Performance) from Advanced to Basic.
If no luck, downgrade PS, if only to get your work done.
You can download the Photoshop CC installer direct from ProDesign Tools.
http://prodesigntools.com/adobe-cc-direct-download-links.html
Follow the instructions carefully or the download link won't work.
Uninstall your 14.2 version and using the downloaded CC installer, you should have 14.0.0
I never did this before, but under Help > Updates make sure you don't update past 14.1.2

Poster Frame and Trim Mode not working properly with post-synced clips

Hi Everyone-
Final Cut Pro seems to be doing something really odd and I'm wondering if anyone else has experienced it and if so what is the fix:
We are shooting a movie on Red with sound coming in on multitrack wav files. We downconvert the R3D files to Prores and then manually sync the tracks in the timeline.
We link the pix and sound and drag them to the bin to make our dailies. They all play, in sync. When we try to set a poster frame the issues begin. If I load the clip into the browser park the playhead on a frame and choose poster frame, the actual frame in the bin is very noticably offset (often by a few seconds).
Also, when I use the trim mode, the frames jump to a different part of the shot during trim. It's like the shot is jumping ahead or back while I hit the frame advance or recede buttons. Once I let go of the button the image jumps to the correct number of frames. But, it's very distracting if I am trying to trim, for example, to just before an actor blinks. I can't trim 1 frame at a time. I have to keep hitting the button, watching the picture jump to a different part of the shot, release the trim button and watch the picture jump back to the now correctly trimmed frame...
As a test I took some of the Prores clips with scratch track sound and brought them into the bin directly from the finder, bypassing the syncing. Using those clips, the trim and poster frames work as expected. Obviously something is going on during syncing.
I assumed maybe because the audio and pix we different lengths the clip was getting "confused", and didn't know where to "start". So, in the timeline with the synced clips, I razor bladed a few shots, linked them, and dragged them to the bin so the audio and video were the exact same length... Same issue.
I have noticed the same behavior on 2 separate Macs so I don't think its a preference or corrupted install issue.
Anyone seen this and have any suggestions?
Thanks,
David

Yes, David, I'm having the same problem under the same circumstances. we're using merged clips made from Prores QTs and multitrk BWF files. In the trim window, the display frame jumps ahead considerably in a frame-by-frame trim, but trims accurately in the timeline. My only work-around has been to use the left/right scrub arrows in the trim window when necessary, which displays the correct frame. Sorry not to have an answer, but I saw a post on another forum from 2007 that speculated it was an FCP 6 bug. Resetting prefs doesn't help.
Tim

[Solved] Systemd in user mode not working properly

Hello.
I wrote this Systemd service that I would like to run as normal user.
[Unit]
Description=Google Drive mount
After=network-online.target
Wants=network-online.target
[Service]
ExecStart=/usr/bin/google-drive-ocamlfuse -m '/home/egidio/Google Drive'
ExecStop=/usr/bin/fusermount -u '/home/egidio/Google Drive'
[Install]
WantedBy=default.target
I start it and everything seems fine, but when I try to access the mounted point, I get this error.
[egidio@egidiolaptop user]$ ls -la ~/Google\ Drive
ls: cannot access /home/egidio/Google Drive: Transport endpoint is not connected
If I run the ExecStart command manually everything works perfectly.
Can you please help me?
Last edited by Aegidius (2015-05-13 18:17:12)

This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

Edit/update function not working properly on visual basic 2012

help, i'm working on a update function on my aplication program using visual studio ultimate 2012 VB.
after i fixed the error on my coding, i debug the program with f5. but, when i tried to update the data on the datagridview it doesn't change even thought the messagebox "data has been updated" show up.
how do i fix this problem?
here is the coding for update function:
form1:
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
ClassSiswa.ubahdata(New SqlConnection, (txt_nis.Text), (txt_nisn.Text), (txt_namasiswa.Text), (cmb_kelaminsiswa.Text), (txt_kotalahir.Text), (DTP_siswa.Text), (cmb_agamasiswa.Text), (txt_beratsiswa.Text), (txt_tinggi_badan.Text))
datagridview()
End Sub
Private Sub UpdateDataSiswa()
ClassSiswa.Nis = txt_nis.Text
ClassSiswa.Nisn = txt_nisn.Text
ClassSiswa.Nama_Siswa = txt_namasiswa.Text
ClassSiswa.Tanggal_Lahir = DTP_siswa.Text
ClassSiswa.Jenis_Kelamin = cmb_kelaminsiswa.Text
ClassSiswa.Kota_Lahir = txt_kotalahir.Text
ClassSiswa.Agama = cmb_agamasiswa.Text
ClassSiswa.Tinggi_Badan = txt_tinggi_badan.Text
ClassSiswa.Berat_Badan = txt_beratsiswa.Text
ClassSiswa.Updatesiswa(ClassSiswa.opencon, (txt_nis.Text))
datagridview()
End Sub
classSiswa:
Public Shared Sub ubahdata(ByVal _cn As SqlClient.SqlConnection, ByVal _Nis As String, ByVal _Nisn As String, ByVal _nama_siswa As String, ByVal _jenis_kelamin As String, ByVal _kota_lahir As String, ByVal _tanggal_lahir As String, ByVal _agama As String, ByVal _berat_badan As String, ByVal tinggi_badan As String)
Dim sql As New SqlClient.SqlCommand
sql.Connection = _cn
sql.CommandType = CommandType.Text
sql.CommandText = "update siswa set nis='" & Nis & "',nisn='" & Nisn & "',nama_siswa='" & Nama_Siswa & "',jenis_kelamin='" & Jenis_Kelamin & "' ,kota_lahir='" & Kota_Lahir & "',tanggal_lahir='" & Tanggal_Lahir & "'agama='" & Agama & "'berat_badan='" & Berat_Badan & "',tinggi_badan='" & tinggi_badan & "'"
MessageBox.Show(" Data Telah Diupdate")
ClassSiswa.closecon()
End Sub
Public Shared Sub Updatesiswa(ByVal _Cn As SqlClient.SqlConnection, ByVal _nis As String)
Dim sql As SqlClient.SqlCommand
sql = New SqlClient.SqlCommand
sql.Connection = _Cn
sql.CommandType = CommandType.Text
sql.CommandText = "Update siswa Set nis = '" & Nis & "', nisn = '" & Nisn & "' where nis = '" & _nis & "'"
sql.ExecuteNonQuery()
End Sub

Hello,
A DataGridView knows nothing about the updates done as shown above, you need to update any rows that have changed yourself. For example. lets say I loaded data from a database table into a DataTable, create a BindingSource and assign that DataTable as the
DataSource for the BindingSource. The BindingSource becomes the DataSource of the DataGridView so now when you moved up/down rows in the DataGridView you are changing position in the BindingSource and can read this data via BindingSource.Current by casting
Current to a DataRowView then access the Row property with Field(Of T or SetField(Of T. Couple this will logic to locate rows that may not be the current row and we still can use SetField(Of T)(Col,Value) to update data in the BindingSource which is then immediately
reflected in the DataGridView.
The following is for MS-Access but the same logic applies for SQL-Server database via SqlClient data provider rather than
OleDb data provider.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

Sleep mode not working properly on Macbook Pro

On my Macbook Pro everytime my mac enters sleep mode just the display goes to sleep never the system even after 8 hours. Checked the energy saver setting both display and computer are set to ten minutes. I can also never get the display to wake back up unless i do a hard reset. Any ideas? Thanks!

Does it now work only on battery? or using the power supply?
If only on the power supply use a grounded plug.
Otherwise try reseating touchpad cable. Post the size and year of your MBP.

Sleep mode not working properly in windows

I have a P67A-GD65 working fine (THANK GOODNESS!) but I have a small annoyance.. It wont wake up from sleep mode unless the power button is pressed! How can I change this to wake up on say, when I click a button on my mouse or my keyboard or even move the mouse? I have the latest bios installed. Thanks!

Depends if you have USB or PS/2 KB/mouse
Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Suspend
to RAM) sleep state.
Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from what power saving
modes when input signal of the PS/2 mouse/ keyboard is detected.

Update/restore not working properly

My wife and I have been trying to get her iPhone 4S to update to the latest version of iOS. The problem is that the software update server appears to be running at the approximate speed of a glacier -- I have been trying to download the update (a 1.66 GB download) for the last three hours, and every time I do it downloads at about 30 KB per second and tells me there is still 24 to 25 hours remaining. I have checked and rechecked, and there is NO possibility of a bottleneck on my end -- no interference from firewalls or antivirus software -- but in spite of this the download always crashes with an Error 9006, WHICH IT SHOULD NOT BE DOING.
Are the servers just completely screwed tonight? Is there a solution I haven't figured out yet? I assure you, I've tried about everything that can be tried.

I would suggest that you hook up the phone to iTunes on the computer you sync with and update that way. It is faster and requires less memory to do the update.
Cheers,
GB

Recent Blackberry update - clock not working properly, nor is Blackberry app worldH

Dear all
Can anyone advise please - my Curve 8520 has just received an update......however, since doing so, I am unable to set the alarm on my clock....and blackberry app world keeps crashing on me.
Has anyone else had this.....can anyone help please....it's very frustrating.
Many thanks in anticipation
Wendy

This is the first I have seen of that issue.
So, open your Clock > Menu key > Set Alarm. When you click on Set Alarm, nothing happens... the device does not respond and no alarm options appear?
I'd say do another reboot: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Let us know.
What is your Operating System loaded to your device?
Look at Options > About, third line down beginning with a "v.5.xxx"
What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

RH_INSERT_INFTY in update mode not working properly

Similar Messages

Maybe you are looking for