RH Window not updating / topics not displaying after repositioning

Hi,
I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly.
For example, I want to compare a Word document to a help topic, so I resize the RH window and position it next to the Word document. I open several topics and do what I need to do. Now I'm done with the Word document, so I maximize the RH window again. This is when the problems start:
The navigation along the top (including the topic tabs) does not refresh.
If I double-click a topic in the left pane, it is sometimes not displayed on the right side, although the cursor movements indicate that RH thinks the topic is displayed. (This is hard to explain, and crazily enough I can't even get a screenshot of this to show what I mean.)
If I reduce the window size back to its previous, smaller size, things look normal again and I can see the topic I just double-clicked. But if I want to use RH in a maximized window again, I have to close and reopen the RH project.
Yes, these problems can be dealt with. But this has been going on for several days now (after a Windows update, perhaps?) and it's getting annoying.
Is anybody else experiencing these problems? Is there a solution?
Thanks
Eileen

Thank you for those suggestions, Peter!
You were right - I was dragging the two windows to where I wanted them.
I haven't yet tested your suggstions extensively (I don't spend a lot of time with RH side by side by side with other applications). However, I haven't seen the problem since I started using Windows key + arrows to position the windows.
BTW, RH is the only application where I was having this problem.
I will post again (or edit this post) if I come up with any new information. Even if no one else has posted about this problem, I'm betting that others are experiencing it. As I said, it's relatively easy to work around. Just annoying.
Thanks again!
Eileen

Similar Messages

  • Folio producer not updating folios on app after publishing folios

    Folio producer not updating folios on app after publishing folios, before May updates it used to update my folios right away, it's been 2 days and my folios has not been published or updated. please help

    yes I did, i even unpublished the folios adn then published them again,  i made them public when publishing and it still doesn't make the updates on the app, on the folio producer it shows the latest files and that the updates request was sucessfull. But istill no updtes on app,
    please help

  • G50-45 : windows 10 update is not working

    Hi G50-45 : windows 10 update is not working ive installed 6 times whole 3 gb data ... BUT its not getting installed .. this is the error Search results for "WindowsUpdate_80200056 OR WindowsUpdate_dt000"‎ (1) ive tried installation via usb tooit ask for serial number .. when i enter serial of 8.1  it says login as normal windows and then restart please suggest regards rahul

    HI ive just retried to do install.. it says : something happened .... and then installaed stopeed at 30 % regards

  • Regarding Template updates, what does this error " not updated, item not found" mean?

    This is the second time I've posted this question so hopefully somebody will respond. At some point in the last few weeks I found that I could no longer apply a template in a group operation (returns the error shown above). If I modify the template and save it it shows all the related files to be updated but does not actually update them and again returns the error "not updated, item not found". As a test I created a duplicate of a particular .html file and applied the associated template successfully. When I apply a template change it does properly update the newly created file but not the others. I also did a mechanical file compare (using windiff.exe) between the original and duplicate file and there are NO differences in the two .html files. I have also deleted and recreated my site maps several times.
    As an aside, Library items do update successfully.
    I am running Dreamweaver CS6 on Windows 7.

    I have an extensive home network and I consider myself to be very proficient with personal computers (had one since 1981) so let's start at that level.
    I have you beat by 2 years. Bought an Apple II+ in 1979!
    When this problem first started, I went to another PC (home built desktop Win 7 64 bit) I have and created a new Dreamweaver site copy using an instance of the site that was on a network share running on a NAS box (Netgear RAID5) that I use for central file storage. Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with. Now I have no idea why sites housed on my PC are having a problem but that seems to be the issue.
    Your setup is very similar to mine - NAS (I'm using an Intel NAS) housing all my working files.
    Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with.
    So it's working in the duplicate site, but not the current site. And in the current site, you have some files that update as desired and some that do not? Why not just make the duplicate site be the main working site?
    Anyhow, I cannot think of any wrinkle that would cause DW to update some legitimate child files in a site but not others, except for a corrupted file cache.

  • HT4623 My iPad will not update, says not connected to Internet, but I am browsing support online.

    my iPad will not update, says not connected to Internet, but I am browsing support online on this same iPad?

    Can you update via itunes on computer?

  • TestStand not updating th descriptio​n after using the edit substep

    I've created numerous custom steps in TestStand.  None of them will update the description after I use the edit substep and change some of that steps properties.  As an example, I have the following step description...
    str(Step.Channel.DeviceName)
    After I use the edit substep, which changes step.Channel.DeviceName, the description does not update.  However, if I then open the properties menu for that item and either select "OK" of "Cancel" to leave the property window, it then updates to the correct values.  Placing down a new step will also force the description to update.  While this is not functionally causing any problems, it would be nice if the descriptions updated immediatly.

    Hey Dillon,
    The reason it doesn't update is because the sequence editor doesn't know that the sequencefile has changed so it doesn't know to redraw that window.  You can force it to redraw the window by calling the method IncChangeCount from the PropertyObjectFileClass.  If you increment the change count it should automatically update the description as soon as your edit substep completes.  Also a piece of advice, in the future if you have TestStand questions, you can probably get a quicker answer to them by posting on the TestStand forums, even if it is using the TestStand API in another programming environment like LabVIEW or CVI.  Hope this helps!
    Message Edited by Patrick P. on 12-06-2006 06:38 PM
    Pat P.
    Software Engineer
    National Instruments

  • Aperture does not update a photo preview after editing in external editor

    I have noticed this problem after installing the last Aperture (3.2.3) update. It appears to be common to my Mac Pro and Mac Book Pro. The updated preview is visible only in "viewer" mode (menu / view / viewer). It's interesting, that updated preview appears in "viewer" mode on both displays (I use two monitors). And when I switch into "split view" the preview switch also and is not updated.
    After relaunching Aperture previews are updated.
    The thumbnail looks to be good (updated). This problem makes my work really uncomfortable.

    This seems to be a bug, and has been discussed in several threads. See this workaround suggested by shuttersp33d: This helped me Re: saving from photoshop

  • Data not updated in business entity after change in architectural object

    Hi,
    A business entity was created from Architectural Object.
    When we modify the address in the architectural object, the data is not updated in the business entity.
    Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
    Thx for your help.
    Regards
    Saad

    Hi,
    I have created new infopackage and ran. Now the following message I have got on the monitor.
    "Data not received in PSA Table
    Diagnosis
    Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
    Procedure
    In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
    You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
    Removing errors
    Follow the instructions in the short dump."
    Any more thoughts?
    Thanks,
    Rao.

  • BAPI_SALESORDER_CREATEFROMDAT2 is not updating the ITEM Qty after Free ITEM

    Hi,
    I am using BAPI_SALESORDER_CREATEFROMDAT2 to create a order.We have customization for populating a FREE ITEM for a Order ITEM.
    Now the Problem is that .....if I am passing more then one Material as ITEM it is not updating the next ITEM Qty and also not populating FREE ITEM afterwords first one.
    Please help me.
    Regards
    Ricky

    Hi,
    Find below the code :
      read table i_table_t into lwa_table_s index 1.
      if sy-subrc eq 0.
    *Order Header
        lwa_ord_head_in-doc_type          = 'ZSO'.
        lwa_ord_head_in-sales_org         = '1000'.
        lwa_ord_head_in-distr_chan        = '10'.
        lwa_ord_head_in-division          = '10'.
        lwa_ord_head_in-req_date_h        = lwa_table_s-delivery.
    *Order Header Update
        lwa_ord_head_inx-doc_type         = 'X'.
        lwa_ord_head_inx-sales_org        = 'X'.
        lwa_ord_head_inx-distr_chan       = 'X'.
        lwa_ord_head_inx-division         = 'X'.
        lwa_ord_head_inx-req_date_h       = 'X'.
        lwa_ord_partners-partn_role       =  'AG'.
        lwa_ord_partners-partn_numb       =  lwa_table_s-sold_to.
        append lwa_ord_partners to lt_ord_partners.
        if lwa_table_s-ship_to is initial.
          lwa_ord_partners-partn_role     =  'WE'.
          lwa_ord_partners-partn_numb     =  lwa_table_s-sold_to.
          append lwa_ord_partners to lt_ord_partners.
        else.
          lwa_ord_partners-partn_role     =  'WE'.
          lwa_ord_partners-partn_numb     =  lwa_table_s-ship_to.
          append lwa_ord_partners to lt_ord_partners.
        endif.
        lt_table_it_t = lwa_table_s-zsd_table_it_t.
        loop at   lt_table_it_t into lwa_table_it_s.
          lwa_ord_items_in-material      = lwa_table_it_s-matnr.
          lwa_ord_items_in-plant         = wa_table_s-plant.
          lwa_ord_items_in-target_qty    = lwa_table_it_s-qty.
          lwa_ord_items_in-comp_quant    = lwa_table_it_s-qty.
          append lwa_ord_items_in to lt_ord_items_in.
          lwa_ord_items_inx-material     = 'X'.
          lwa_ord_items_inx-plant        = 'X'.
          lwa_ord_items_inx-target_qty   = 'X'.
          lwa_ord_items_inx-comp_quant   = 'X'.
          lwa_ord_items_inx-updateflag   = 'I'.
          append lwa_ord_items_inx to lt_ord_items_inx.
    Schedule Line Information
          lwa_schedule_lines-sched_line  = 'X'.
          lwa_schedule_lines-req_date    = lwa_table_s-date_del.
          lwa_schedule_lines-date_type   = '1'.
          lwa_schedule_lines-req_qty     = lwa_table_it_s-qty.
          append lwa_schedule_lines to lt_schedule_lines.
          lwa_schedule_lines_x-updateflag = 'I'.
          lwa_schedule_lines_x-sched_line = 'X'.
          lwa_schedule_lines_x-req_date   = 'X'.
          lwa_schedule_lines_x-date_type  = 'X'.
          lwa_schedule_lines_x-req_qty    = 'X'.
          append lwa_schedule_lines_x to lt_schedule_lines_x.
        endloop.
    Here I am getting First Item and it's free configured Item perfectly for the Qty 1.
    But when I pass more then 1 Qty or Multiple ITEMS it is not populating other respective free configured ITEMS with them.Also IT is not updating the other ITEM Qty other the first one.
    For Example:
    Item  No      ITEM            Qty           .......
    10             ITEM1           1 EA        ..........
    20             FREE1          1 DAY     ..........
    30             ITEM2            0             ..........
    40             ITEM3            0             .........
    In above example After 30 and 40 two Free ITEM should be generated with 1 Day and for Qty 1 EA
    Regards
    Ricky

  • I downloaded an Adobe plug in and it will not update my computer even after a restart.

    I downloaded an Adobe plug in and it will not update in my computer even after a restart.  Any ideas?

    to do an up-date you will need the original app. Then you can up-date

  • MBA not always recognizes external display after sleep

    Hi,
    I have a 2011 MBA and use it on a external display (Dell 2709w) with the lid open. The issue with this MBA is that after sleep it often (every second time I wake it up) doesn't show anything on my external monitor. In order that the external monitor works again I have to plug the DVI cord out and in or press recognize monitors under monitor settings.
    I also did a PMC and SMC reset but both did not help.
    I have also done a complete reinstall witch did not help as well.
    I also did a test with a MBA from a friend (exact same model) and his always works with the external display after sleep while mine only works every second time.
    Could this be a hardware defect? sound pretty strange to me, but who knows...

    I have managed to make the Apple Hardware test by just pressing "D" while restarting. The test, however, did not find any error - but this does not surprise me as I think it only tests the ram.

  • Delivery block not updated in sales order after released VKM3

    Hi all,
    I am facing below error
    after released  credit block throuh VKM3 also i am unable to delivery becasue it is not updated still block exist in sales order level.
    i made all nacessary settings for that and also i tried through VKM1 but this tcode through error no poosible entries.
    Thanks in advance
    Srinivasa

    hi,
    check the following steps of assignment you did right or not
    1)first check in  t- code FD32 U  assigned authorization person & each credit limit U shud assign
    an authorization person along with credit limit
    2) check - conditon records with KRML output is there or not
    please read standard SAP config help as a check point doc.[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
    Let me know if it is soling your issue...
    rgards,
    rajeev

  • Deactivation date is not updating in Asset Master after retirement (ABAON)

    Dear Experts,
    Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation).  Below is the asset and class:
    Asset name:  Maruti Baleno
    Asset Class: Vehicles
    Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
    When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
    Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
    Thanks,
    Francis.J

    Dear Atif Farooq,
    In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
    200     Retirement without revenue
    210     Retirement with revenue
    When am trying to update manually below error appearing in AS02
    Deactivation not possible. Dep.area 15 has acquisition values
    Message no. AA296
    Diagnosis
    You cannot deactivate, since acquisition values are still present in depreciation area 15.
    Procedure
    Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
    The above asset procured in the year of 2009 and same has been retired 2009.
    Thanks,
    Francis J

  • TS3992 Changes to my notes, contacts, etc., on my iPhone are not updating in the Cloud after back up

    I upgraded to iPhone 5 but when I back up the Cloud (both wifi and plug-in), changes to my notes, contacts, etc., that I've made on my iPhone are not updating in the Cloud

    Hi Gorm019,
    If you are having issues with Photo Stream, you may find the following articles helpful:
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/ht4486
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/ts3989
    Regards,
    - Brenden

  • Why does my library not update itunes to display purchased songs?

    I bought a portion of an album a few months ago, and went to purchase the rest of the album and none of the songs I have purchased show up as purchased.  I bought one of the songs I did not own, and it instantly marked it as purchased but did not update the rest of it.  Any advice/ fix for this?  Also I have the "share details of your library with apple" turned on.

    public void dImg(Image po){
    thebkg1=po;
    validate()
    repaint();
    }

Maybe you are looking for